AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

381-9220 WIRING GP-FUEL PUMP -REFUELING PUMP PART OF 380-1984 PUMP AR-FUEL TRANSFER AN ATTACHMENT 308E2 CR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL
MOTOR GP
POWER TRAIN AR
SPROCKET GP

MINI HYD EXCAVATOR 308E2 CR MINI HYD EXCAVATOR TMX
 308E2 CR Mini Hydraulic Excavator TMX00001-UP (MACHINE) POWERED BY C3.3B Engine SEBP6875 308E2 CR TMX   (2013)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ENGINE
415-4441 WIRING GP-ENGINE
WIRING GP-ENGINE
436-2843 WIRING GP-ENGINE
WIRING GP-FUEL PUMP
381-9220 WIRING GP-FUEL PUMP
WIRING GP-MAIN CONTROL VALVE
416-4212 WIRING GP-MAIN CONTROL VALVE
WIRING GP-OVERLOAD WARNING
381-9216 WIRING GP-OVERLOAD WARNING
WIRING GP-QUICK COUPLER
381-9228 WIRING GP-QUICK COUPLER
 

#SEBP68750100
 

381-9220: WIRING GP-FUEL PUMP

381-9220 WIRING GP-FUEL PUMP -REFUELING PUMP
PART OF 380-1984 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
i04681814 SEBP6875
3819220 WIRING GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [19] STRAP-CABLE  
2. 163-6795 [1] STRAP-CABLE  
3. 172-8660 [1] SWITCH GP-LIQUID LEVEL (FUEL TANK)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1386 E SLEEVE (30-CM)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 379-0820 [1] SWITCH AS-ROCKER (REFUELING PUMP)  
5. 379-0821 [1] SWITCH AS-ROCKER (REFUELING PUMP RELAY)  
    (EACH SWITCH AS INCLUDES)
  111-7899 [1] GASKET  
6. 430-6449 Y [1] HARNESS AS-PUMP  
7. 381-9222 [1] HARNESS AS-SWITCH  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
8. 132-5789 [1] CLIP (LADDER)  
9. 239-1182 [1] RELAY AS (12-VOLT)(POWER SUPPLY)  
10. 250-2048 [1] RELAY AS (12-VOLT)(POWER TAKE-OFF)  
11. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
13. 8T-4171 M [2] BOLT (M6X1X12-MM)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 2M-9780 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68750101
 

416-4212: WIRING GP-MAIN CONTROL VALVE

416-4212 WIRING GP-MAIN CONTROL VALVE
PART OF 415-4362, 415-4366 CONTROL AR-AUXILIARY
AN ATTACHMENT
i05256338 SEBP6875
4164212 WIRING GP-MAIN CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
2. 204-1611 [2] STRAP (DUAL)  
3. 177-2215 [1] STRAP-DUAL CLAMP  
4. 266-7379 [2] STRAP-CABLE  
5. 349-1812 [1] SWITCH AS-PRESSURE (PILOT OIL)  
  108-7516 [1] FITTING  
  3J-1907 [1] SEAL-O-RING  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
6. 422-2896 Y [1] HARNESS AS-CHASSIS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68750102
 

381-9216: WIRING GP-OVERLOAD WARNING

381-9216 WIRING GP-OVERLOAD WARNING -OVERLOAD WARNING
PART OF 415-4434 LINES AR-BOOM
AN ATTACHMENT
i04689694 SEBP6875
3819216 WIRING GP-OVERLOAD WARNING Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 7K-1181 [1] STRAP-CABLE  
3. 204-1611 [1] STRAP (DUAL)  
4. 379-0817 [1] SWITCH AS-ROCKER (OVERLOAD WARNING DEVICE)  
  111-7899 [1] GASKET  
5. 381-9217 [1] HARNESS AS-CONTROL  
  103-2529 E HOSE (190-CM)  
  230-4013 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  8T-8730 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
6. 245-8842 [1] CLIP (LOOP)  
  E   ORDER BY THE CENTIMETER
 

#SEBP68750103
 

381-9228: WIRING GP-QUICK COUPLER

381-9228 WIRING GP-QUICK COUPLER
PART OF 415-4383, 415-4440 CONTROL AR-COUPLER
AN ATTACHMENT
i04692780 SEBP6875
3819228 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 381-9230 [1] HARNESS AS-SOLENOID  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
 

#SEBP68750104
 

417-1103: DRIVE GP-FINAL

417-1103 DRIVE GP-FINAL -WITH MOTOR
PART OF 415-4387 MOTOR & MTG GP-TRAVEL
Type 1
i06155855 SEBP6875
4171103 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 421-5328 Y [1] MOTOR GP-PISTON  
2. 435-0793 [1] COVER  
3. 435-0794 [4] GEAR-PLANETARY  
4. 435-0795 [1] GEAR-SUN  
5. 435-0796 [4] COLLAR  
6. 435-0797 [1] COLLAR-THRUST  
7. 435-0798 [1] RING-SNAP  
8. 435-0799 [1] PLATE-THRUST  
9. 435-0800 [1] PLATE-THRUST  
10. 438-8338 [1] RING-SLIDE  
11. 438-8339 [2] SET-SEAL  
12. 438-8340 [120] GUIDE  
13. 438-8341 [4] RING-SNAP  
14. 438-8342 [4] WASHER-THRUST  
15. 438-8343 [4] WASHER-THRUST  
16. 438-8344 [1] SEAL-O-RING  
17. 095-1582 HJ [4] SEAL-O-RING  
18. 095-1575 HJ [3] SEAL-O-RING  
19. 227-5990 [2] PLUG  
20. 150-6379 [1] PLUG  
21. 399-1926 [2] PLUG  
22. 095-1593 J [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  430-4668 [1] KIT-BASE  
    (INCLUDES CASING, BALL BEARING & SNAP RING)
  430-4676 [1] KIT-FINAL DRIVE BEARING  
    (INCLUDES CARRIER, PLANETARY GEARS, SUN GEAR, COLLARS, ROLLER BEARINGS, SNAP RINGS & THRUST WASHERS)
  430-4677 J [1] KIT-FINAL DRIVE BEARING  
    (ALSO INCLUDES BALL BEARING, SPRING PIN, BODY, SPOOLS, CHECK VALVES, SPRING GUIDE, SPRINGS, PLUGS, CHOKES, RING,
    O-RING SEALS, SEAT, RETAINER, PISTON, STOPPER, SPACER, BACKUP RINGS)
  430-4678 [1] KIT-FINAL DRIVE BEARING  
    (INCLUDES HOUSING, CONTROL PISTON & OIL SEAL)
  435-0787 [1] KIT-CRANKSHAFT BEARING  
    (INCLUDES SHAFT & BALL BEARING)
  435-0788 [1] KIT-FINAL DRIVE BEARING  
    (INCLUDES CYLINDER BARREL, VALVE PLATE, PISTONS, SHOES, SHOE HOLDER, BARREL HOLDER, PINS, SPRING,RETAINERS & SNAP RING))
  435-0789 H [1] KIT-FINAL DRIVE BEARING  
    (ALSO INCLUDES O-RING SEAL)
  435-0790 Y [1] KIT-SEAL  
  435-0791 [1] KIT-FINAL DRIVE BEARING  
    (INCLUDES O-RING SEALS & BACKUP RINGS)
  435-0792 [1] KIT-SNAP RING  
    (INCLUDES SNAP RINGS)
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP68750105
 

417-1103: DRIVE GP-FINAL

417-1103 DRIVE GP-FINAL -WITH MOTOR
PART OF 415-4387 MOTOR & MTG GP-TRAVEL
Type 2
i07047280 SEBP6875
4171103 DRIVE GP-FINAL Parts scheme 4171103 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 421-5328 Y [1] MOTOR GP-PISTON  
2. 435-0793 [1] COVER  
3. 435-0794 [4] GEAR-PLANETARY  
4. 435-0795 [1] GEAR-SUN  
5. 435-0796 [4] COLLAR  
6. 435-0797 [1] COLLAR-THRUST  
7. 435-0798 [1] RING-SNAP  
8. 435-0799 [1] PLATE-THRUST  
9. 435-0800 [1] PLATE-THRUST  
10. 438-8338 [1] RING-SLIDE  
11. 438-8339 C [1] SET-SEAL  
12. 438-8340 [120] GUIDE  
13. 438-8341 [4] RING-SNAP  
14. 438-8342 [4] WASHER-THRUST  
15. 438-8343 [4] WASHER-THRUST  
16. 227-5990 [2] PLUG  
17. 150-6379 [1] PLUG  
18. 9S-8004 C [2] PLUG (9/16-18-THD)  
19. 430-4668 [1] KIT-BASE  
    (INCLUDES BODY-CASING, BEARINGS, & RING)
20. 435-0792 [1] KIT-SNAP RING  
    (INCLUDES RINGS)
   
    AVAILABLE REPAIR KIT(S):
  430-4676 [1] KIT-FINAL DRIVE BEARING  
    (INCLUDES PARTS MARKED 'H'IN THE GRAPHICS)
  435-0789 [1] KIT-FINAL DRIVE BEARING  
    (INCLUDES PARTS MARKED 'J' IN THE GRAPHICS)
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP68750106
 

415-4387: MOTOR & MTG GP-TRAVEL

415-4387 MOTOR & MTG GP-TRAVEL
PART OF 415-4386 POWER TRAIN AR
i05278790 SEBP6875
4154387 MOTOR & MTG GP-TRAVEL Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 417-1103 Y [2] DRIVE GP-FINAL  
2. 8T-7338 M [24] BOLT (M16X2X45-MM)  
3. 9X-8257 [24] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68750107
 

219-7720: MOTOR GP-GEROTOR

219-7720 MOTOR GP-GEROTOR
PART OF 225-8809 DRIVE GP-AUGER
AN ATTACHMENT
i05228065 SEBP6875
2197720 MOTOR GP-GEROTOR Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-4577 [1] SEAL-O-RING  
2. 230-4578 [1] SEAL-SHAFT  
3. 230-4579 [1] RING-RETAINING  
4. 230-4580 [1] WASHER-HARD  
5. 230-4581 [1] WASHER-HARD  
 

#SEBP68750108
 

415-4386: POWER TRAIN AR

415-4386 POWER TRAIN AR
PART OF 399-8365 COMMON AR
i05267886 SEBP6875
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  397-6547 Y [1] MOTOR & MTG GP-SWING  
  415-4387 Y [1] MOTOR & MTG GP-TRAVEL  
  294-5331 Y [2] SPROCKET GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68750109
 

294-5331: SPROCKET GP

294-5331 SPROCKET GP
PART OF 415-4386 POWER TRAIN AR
i04695591 SEBP6875
2945331 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 308E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 285-6125 M [15] BOLT (M14X2-THD)  
2. 294-8262 [1] SPROCKET-TRACK  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Battery - Recycle
308E2 CR Mini Hydraulic Excavator
Battery or Battery Cable - Inspect/Replace
308E2 CR Mini Hydraulic Excavator
Power Receptacle - If Equipped
308E2 CR Mini Hydraulic Excavator
Fuses - Replace
308E2 CR Mini Hydraulic Excavator
Battery Disconnect Switch - If Equipped
308E2 CR Mini Hydraulic Excavator
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Service the Engine Control Module 80-Pin Connector of C3.3B Tier 4 Final and C3.8 Tier 4 Interim Engines Using the <NOBR>423-1563</NOBR> Terminal As Kit {1408, 1901}
Procedure to Service the Engine Control Module 80-Pin Connector of C3.3B Tier 4 Final and C3.8 Tier 4 Interim Engines Using the 423-1563 Terminal As Kit {1408, 1901}
Jumper Harness for Engine Harness on Certain C3.3B and C3.8 Machine Engines {1408}
Jumper Harness for Engine Harness on Certain C3.3B and C3.8 Machine Engines {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation of Closed Crankcase Breather Heater Kits on Certain Mini Hydraulic Excavators{1317, 1408}
Installation of Closed Crankcase Breather Heater Kits on Certain Mini Hydraulic Excavators{1317, 1408}
Procedure for Reworking the Mass Air Flow Sensor and Pressure Differential Wiring Harnesses{1408}
Procedure for Reworking the Mass Air Flow Sensor and Pressure Differential Wiring Harnesses{1408}
Installation Procedure for the Engine Harness Assembly on 308E2 Mini Hydraulic Excavator {1408}
Installation Procedure for the Engine Harness Assembly on 308E2 Mini Hydraulic Excavator {1408}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
Technical Information Bulletin
Overload Warning Alarm May Sound on Certain 308E2 Excavators Equipped With a Boom Lowering Control Valve{1408, 5057}
Overload Warning Alarm May Sound on Certain 308E2 Excavators Equipped With a Boom Lowering Control Valve{1408, 5057}
Specifications
Radio (AM/FM)
308E2 CR Mini Hydraulic Excavator Machine System Specifications
Wiring (Main Control Valve)
308E2 CR Mini Hydraulic Excavator Machine System Specifications
Wiring (Console)
308E2 CR Mini Hydraulic Excavator Machine System Specifications
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS AT THE MASS AIR FLOW AND PRESSURE DIFFERENTIAL SENSOR BREAK-OUT SECTIONS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
Testing and Adjusting
Electric Starting System - Test
C3.3B Engines for Caterpillar Built Machines
Troubleshooting
Electrical Connectors
C3.3B and C3.8 Engines for Caterpillar Built Machines
System Schematic
303.5E CR, 304E CR, 305E CR, 305.5E CR, 308E CR and 308E2 CR Mini Hydraulic Excavators
Connector Contact Description
303.5E CR, 304E CR, 305E CR, 305.5E CR, 308E CR and 308E2 CR Mini Hydraulic Excavators
Connector Locations
303.5E CR, 304E CR, 305E CR, 305.5E CR, 308E CR and 308E2 CR Mini Hydraulic Excavators
Electrical Connectors - Inspect
C3.3B and C3.8 Engines for Caterpillar Built Machines
Relay - Test - ECM Main Relay
C3.3B and C3.8 Engines for Caterpillar Built Machines
Disassembly and Assembly
Battery - Remove and Install
308E2 CR
Mini Hydraulic Excavator C3.3B Engine Supplement
Service Magazine
A New Procedure for Servicing the Electronic Control Module 80-pin connector using the 423-1563 Terminal Kit Is Available {1408, 1901}
2013/04/12
An Improved Routing of the Switch Harness Assembly for the Boom Swing, Hydraulic Lockout and Start Switch is Now Used on Certain Mini Hydraulic Excavators {1408}
2013/10/29
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Improved Chassis Harness for Certain 308E CR and 308E2 CRMini Hydraulic Excavators {1408}
2014/03/17
Improved Mass Air Flow Sensor Harness and Pressure Differential Wiring Harness are Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408}
2014/08/18
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 308E2 CR :

WIRING GP-ENGINE
436-2843 WIRING GP-ENGINE
WIRING GP-ENGINE
415-4441 WIRING GP-ENGINE
WIRING GP-ENGINE
415-4441 WIRING GP-ENGINE
WIRING GP-CONSOLE
415-4442 WIRING GP-CONSOLE
WIRING GP-CAB
381-9229 WIRING GP-CAB
WIRING GP-CAB
380-6327 WIRING GP-CAB
SWITCH GP-ROTARY
319-4420 SWITCH GP-ROTARY
STARTING MOTOR GP-ELECTRIC
387-9085 STARTING MOTOR GP-ELECTRIC
WIRING GP-MAIN CONTROL VALVE
416-4212 WIRING GP-MAIN CONTROL VALVE
WIRING GP-OVERLOAD WARNING
381-9216 WIRING GP-OVERLOAD WARNING
WIRING GP-QUICK COUPLER
381-9228 WIRING GP-QUICK COUPLER
DRIVE GP-FINAL
417-1103 DRIVE GP-FINAL
DRIVE GP-FINAL
417-1103 DRIVE GP-FINAL
MOTOR & MTG GP-TRAVEL
415-4387 MOTOR & MTG GP-TRAVEL
MOTOR GP-GEROTOR
219-7720 MOTOR GP-GEROTOR
415-4386 POWER TRAIN AR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.