AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

522-4001 EDGE GP-CUTTING S/N YT31-UP FIELD INSTALLATION D5K2 XL TRACK-TYPE TRACTOR


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP
HYDRAULIC SYSTEM
MOTOR GP

TRACK-TYPE TRACTOR D5K2 XL TRACK-TYPE TRACTOR WT3
 D5K2 XL & D5K2 LGP Small Track Type Tractor WT300001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6884 D5K2 XL WT3   (2015)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
EDGE GP-CUTTING
507-2831 EDGE GP-CUTTING
EDGE GP-CUTTING
507-2832 EDGE GP-CUTTING
EDGE GP-CUTTING
522-4001 EDGE GP-CUTTING
TIP GP-RIPPER
521-9284 TIP GP-RIPPER
TOOTH GP-RIPPER
9J-1137 TOOTH GP-RIPPER
 

#SEBP68840720
 

522-4001: EDGE GP-CUTTING

522-4001 EDGE GP-CUTTING
S/N YT31-UP
FIELD INSTALLATION
i07033623 SEBP6884
5224001 EDGE GP-CUTTING Parts scheme
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 472-4119 [2] EDGE-CUTTING  
2. 480-8939 [1] BIT-END (RH)  
3. 480-8940 [1] BIT-END (LH)  
4. 3F-5108 [22] BOLT-PLOW (5/8-11X2.25-IN)  
5. 4K-0367 [22] NUT-FULL (5/8-11-THD)  
6. 5P-8247 [22] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP68840721
 

187-1710: FAIRLEAD GP-WINCH

187-1710 FAIRLEAD GP-WINCH
S/N WT31-UP; YT31-UP
THREE ROLLER
PART OF 397-4392 FAIRLEAD GP-WINCH
AN ATTACHMENT
i01916361 SEBP6884
1871710 FAIRLEAD GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-9722 B [6] RING-THRUST  
2. 6L-9726 B [6] RING-THRUST  
3. 6Y-2933 B [6] RING-THRUST  
4. 214-9541 [1] FRAME AS-FAIRLEAD  
5. 214-9542 [1] SHAFT-ROLLER  
6. 214-9543 Y [1] ROLLER GP-FAIRLEAD (TOP)  
7. 214-9544 [2] SHAFT  
8. 214-9545 Y [2] ROLLER GP-FAIRLEAD (TOP)  
9. 215-1789 [2] BUSHING  
10. 215-1850 [1] ROD-THREADED  
11. 215-1866 [1] KEEPER  
12. 215-1867 [2] KEEPER  
13. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
14. 5S-7379 [6] BOLT (3/8-16X0.875-IN)  
15. 6V-8190 [2] NUT (1-8-THD)  
16. 7X-0406 [2] BOLT (1-8X3-IN)  
17. 7X-0452 [2] NUT-FULL (1-1/2-6-THD)  
18. 7X-0537 [2] WASHER-HARD (40.5X67X6-MM THK)  
19. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP68840722
 

397-4392: FAIRLEAD GP-WINCH

397-4392 FAIRLEAD GP-WINCH
S/N WT31-UP; YT31-UP
AN ATTACHMENT
i06031300 SEBP6884
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  187-1710 Y [1] FAIRLEAD GP-WINCH  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68840723
 

397-4393: FAIRLEAD GP-WINCH

397-4393 FAIRLEAD GP-WINCH
S/N WT31-UP; YT31-UP
AN ATTACHMENT
i06031301 SEBP6884
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  187-1713 Y [1] CONVERSION GP-WINCH  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68840724
 

397-4391: FASTENER GP-HYDRAULIC LINES

397-4391 FASTENER GP-HYDRAULIC LINES
S/N WT31-UP; YT31-UP
PART OF 397-4320 WINCH AR
AN ATTACHMENT
i06031408 SEBP6884
3974391 FASTENER GP-HYDRAULIC LINES Parts scheme
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
2. 8T-4182 M [8] BOLT (M10X1.5X45-MM)  
  M   METRIC PART
 

#SEBP68840725
 

208-5551: GEAR GP-WINCH

208-5551 GEAR GP-WINCH
S/N JAG1-UP
PART OF 256-3738 WINCH AR
AN ATTACHMENT
i01923413 SEBP6884
2085551 GEAR GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-6174 [3] BEARING  
2. 119-1616 [1] RING  
3. 119-2195 [1] RING  
4. 123-4410 [2] SPACER (2X2.75X0.125-IN THK)  
5. 129-7301 [1] SEAL-O-RING  
6. 161-6424 [1] GEAR  
7. [1] GEAR  
8. [1] GEAR  
9. 161-8041 [1] WASHER (100.5X125X3.5-MM THK)  
10. 162-0178 [2] BALL BEARING  
11. 162-0179 [1] RING  
12. 162-2772 [1] RING  
13. 172-2437 [1] BEARING AS-NEEDLE  
14. 203-6639 [1] SHAFT-GEAR  
15. 1M-7914 [1] RING-RETAINING  
16. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
17. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP68840726
 

515-6431: GEAR GP-WINCH

515-6431 GEAR GP-WINCH
S/N WT31-UP; YT31-UP
PART OF 442-4777 WINCH GP
AN ATTACHMENT
i06998608 SEBP6884
5156431 GEAR GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 523-2068 [1] SHAFT-IDLER  
2. 523-2069 [1] GEAR-IDLER  
3. 523-2070 [2] BEARING  
4. 523-2071 B [2] SHIM (0.3-MM THK)  
5. 523-2072 B [1] SHIM (0.3-MM THK)  
6. 523-2073 B [2] SHIM (0.4-MM THK)  
7. 031-0426 [2] CUP-BEARING  
8. 1K-6995 [2] RING-LOCK  
  B   USE AS REQUIRED
 

#SEBP68840727
 

211-8171: GEAR GP-WINCH TRANSFER

211-8171 GEAR GP-WINCH TRANSFER
S/N JAG1-UP
PART OF 309-5091 BRAKE & PLANETARY GP-WINCH
AN ATTACHMENT
i01921731 SEBP6884
2118171 GEAR GP-WINCH TRANSFER Parts scheme
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-2771 [1] BALL BEARING  
2. 1S-3743 [1] BALL BEARING  
3. 203-6632 [1] CARRIER-BEARING  
4. 203-6633 [1] GEAR-PINION (16-TEETH)  
5. 9F-1399 [1] SEAL-O-RING  
 

#SEBP68840728
 

208-5549: MOTOR & MTG GP-WINCH

208-5549 MOTOR & MTG GP-WINCH
S/N JAG1-UP
PART OF 256-3738 WINCH AR
AN ATTACHMENT
i01923137 SEBP6884
2085549 MOTOR & MTG GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-1729 Y [1] MOTOR GP-PISTON (WINCH)  
2. 3D-2824 [1] SEAL-O-RING  
3. 3H-8430 [1] SETSCREW (3/8-16X0.75-IN)  
4. 4S-5898 [1] SEAL-O-RING  
5. 6V-8637 [1] CONNECTOR  
6. 6V-9746 [1] SEAL-O-RING  
7. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68840729
 

200-1729: MOTOR GP-PISTON

200-1729 MOTOR GP-PISTON
S/N JAG1-UP
PART OF 208-5549 MOTOR & MTG GP-WINCH
AN ATTACHMENT
i01923371 SEBP6884
2001729 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your D5K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-9247 [1] SEAL-O-RING  
2. 191-3539 [2] NUT-SEAL  
3. 9S-8006 [1] PLUG (7/8-14-THD)  
4. 6V-4589 [1] SEAL-O-RING  
5. 8T-9598 [1] RING-RETAINING  
6. 6E-5063 [2] CAP AS  
7. 7X-1553 [1] SEAL-LIP TYPE  
8. 9S-8008 [1] PLUG (1-1/16-12-THD)  
9. 6V-5050 [1] SEAL-O-RING  
10. 9S-8004 [3] PLUG (9/16-18-THD)  
11. 6V-5049 [3] SEAL-O-RING  
12. 141-0305 [1] SETSCREW  
13. 096-4900 M [1] SETSCREW-SOCKET  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D5K2 XL :

EDGE GP-CUTTING
507-2832 EDGE GP-CUTTING
EDGE GP-CUTTING
507-2831 EDGE GP-CUTTING
EDGE GP-CUTTING
507-2830 EDGE GP-CUTTING
EDGE GP-CUTTING
507-2829 EDGE GP-CUTTING
EDGE GP-CUTTING
507-2828 EDGE GP-CUTTING
EDGE GP-CUTTING
500-3873 EDGE GP-CUTTING
EDGE GP-CUTTING
500-3872 EDGE GP-CUTTING
EDGE GP-BIT & CUTTING
6Y-5838 EDGE GP-BIT & CUTTING
FAIRLEAD GP-WINCH
187-1710 FAIRLEAD GP-WINCH
397-4392 FAIRLEAD GP-WINCH
397-4393 FAIRLEAD GP-WINCH
FASTENER GP-HYDRAULIC LINES
397-4391 FASTENER GP-HYDRAULIC LINES
GEAR GP-WINCH
208-5551 GEAR GP-WINCH
GEAR GP-WINCH
515-6431 GEAR GP-WINCH
GEAR GP-WINCH TRANSFER
211-8171 GEAR GP-WINCH TRANSFER
MOTOR & MTG GP-WINCH
208-5549 MOTOR & MTG GP-WINCH
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.