333-1450 WIRING GP-CAMERA -REAR VIEW S/N DYB1-UP FOR USE WITH @@@@@333-1367@@@@@ AN ATTACHMENT 930K WHEEL LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 333-1450 WIRING GP-
1. 372-1930 WIRING GP-
2. 399-5841 WIRING GP-
3. 333-1390 WIRING GP-
4. 372-1880 WIRING GP-
5. 395-0113 WIRING GP-
6. 395-0113 WIRING GP-
7. 395-0113 WIRING GP-
8. 333-1420 WIRING GP-
9. 372-1882 WIRING GP-
0. INFORMATION

WHEEL LOADER 930K WHEEL LOADER DYB
930K Small Wheel Loader DYB00001-UP (MACHINE) POWERED BY C7.1 Engine SEBP6893 930K DYB (2013)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

377-5623 WIRING GP-AUTOLUBE CONTROL

372-1860 WIRING GP-CAB

333-1450 WIRING GP-CAMERA

372-1930 WIRING GP-CHASSIS

399-5841 WIRING GP-COMMUNICATION

333-1390 WIRING GP-CONSOLE

#SEBP68930230

333-1450: WIRING GP-CAMERA

WIRING GP-CAMERA

333-1450 WIRING GP-CAMERA -REAR VIEW
S/N DYB1-UP
FOR USE WITH @@@@@333-1367@@@@@
AN ATTACHMENT

i05312438 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	347-1668 J	[1]	CAMERA AS (115-DEG, COLOR)
2.	349-7894	[1]	PLATE
3.	8T-1158 M	[2]	BOLT-SOCKET HEAD (M8X1.25X20-MM)
4.	360-1850	[1]	HARNESS AS-CAB (CAMERA, REAR)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
5.	268-8643	[1]	CABLE AS (6-M)
6.	2D-2751	[1]	GROMMET
7.	3S-2093	[34]	STRAP-CABLE
8.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	251-4162 J	[1]	KIT-BRACKET (CAMERA)
			(INCLUDES BRACKET, BOLTS, LOCK NUTS, GASKET & ALLEN KEY)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP68930231

372-1930: WIRING GP-CHASSIS

WIRING GP-CHASSIS

372-1930 WIRING GP-CHASSIS
S/N DYB1-UP
PART OF 381-4385 CHASSIS AR
ALSO AN ATTACHMENT

i05296411 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-3426 D		CHANNEL-TRIM (0.1-M)
2.	3E-5169	[1]	GUARD-SWITCH
3.	7K-1181	[55]	STRAP-CABLE
4.	117-3789	[1]	RETAINER
5.	128-4249	[1]	LOCKWASHER
6.	129-8087	[1]	SPACER (13.9X17.1X14-MM THK)
7.	161-2539	[1]	ALARM AS (BACKUP)
	4B-2043	[2]	NUT (8-32-THD)
8.	171-2205	[1]	CIRCUIT BREAKER AS (40-AMPERE)
9.	171-2209	[2]	CIRCUIT BREAKER AS (70-AMPERE)
			(EACH CIRCUIT BREAKER AS INCLUDES)
	4E-5724	[2]	WASHER (7X12X1-MM THK)
	8T-0122	[2]	NUT-FULL (1/4-28-THD)
	1H-3244	[1]	LOCKWASHER
10.	200-6345	[2]	SADDLE-MOUNTING (DUAL SWIVEL)
11.	201-1024	[1]	BRACKET
12.	204-2281	[5]	STRAP-CABLE
13.	211-0052	[1]	NUT (1-11/16-18-THD)
14.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(CURRENT MONITORING RELAY)
15.	256-6454	[1]	SENSOR-TEMPERATURE (2-PIN)(CHARGE AIR)
16.	297-8752 Y	[1]	SWITCH GP-TOGGLE (ENGINE SHUTOFF)
17.	325-4471 Y	[2]	LAMP GP-FLOOD (24-VOLT, 35-WATT)(CAB, FRONT)
18.	333-1387	[4]	RESISTOR AS (274-OHM, 1-WATT)
19.	333-1389	[1]	FILM-IDENTIFICATION (CIRCUIT BREAKER)
20.	333-1417	[1]	BAR-BUS
21.	333-1434	[1]	PLATE AS
	159-9539 M	[5]	NUT-WELD (M6X1-THD)
	195-1095 M	[4]	STUD-WELD (M6X1X20-MM)
22.	341-9988	[1]	STUD AS
23.	344-7391	[1]	SENSOR-PRESSURE (EJECTOR)(BOOM CYL, HEAD END)
24.	350-1239	[1]	COVER
25.	355-5860	[1]	RECEPTACLE (CLIP)
26.	360-1841	[1]	COVER
27.	360-1842	[1]	STUD AS
	062-5388	[1]	LOCKNUT (1-11-1/2-THD)
28.	360-1843 Y	[1]	HARNESS AS-WINDOW WIPER
29.	360-1858	[1]	FILM-IDENTIFICATION (ENGINE STOP, RUN)
30.	360-1859	[1]	BRACKET AS
	159-9539 M	[2]	NUT-WELD (M6X1-THD)
31.	372-1931 Y	[1]	HARNESS AS-WIRING
32.	372-1933 Y	[1]	HARNESS AS-CHASSIS
33.	372-1934 Y	[1]	HARNESS AS-LIGHTING
34.	132-5789	[1]	CLIP (LADDER)
35.	156-6175	[4]	CLIP (LADDER)
36.	168-4511	[6]	SCREW-PAN HEAD (10-32X1-IN)
37.	1S-0994	[2]	CLIP (LOOP)
38.	204-8000	[4]	MOUNTING-CABLE TIE
39.	309-4314	[4]	CLIP (LADDER)
40.	316-9351	[6]	MOUNTING-CABLE TIE
41.	3J-1907	[1]	SEAL-O-RING
42.	3S-2093	[28]	STRAP-CABLE
43.	4D-5243	[1]	LOCKWASHER
44.	4P-7429	[1]	CLIP (LADDER)
45.	4P-7581	[6]	CLIP (LADDER)
46.	4P-8134	[4]	CLIP (LADDER)
47.	5C-2890 M	[4]	NUT (M6X1-THD)
48.	5C-9553 M	[5]	BOLT (M6X1X16-MM)
49.	7B-1251	[1]	GROMMET
50.	7P-1695	[2]	WASHER (10.5X19X3-MM THK)
51.	7X-0620	[6]	WASHER-HARD (5.5X13X1.6-MM THK)
52.	7X-7729	[4]	WASHER (11X25X3-MM THK)
53.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
54.	8T-4133 M	[5]	NUT (M10X1.5-THD)
55.	8T-4136 M	[9]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
57.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
58.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
59.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
60.	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
61.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
62.	8T-4205	[9]	WASHER-HARD (7.2X14.5X2-MM THK)
63.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
64.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
65.	8T-7524	[1]	SEAL-O-RING
66.	9X-6165	[2]	WASHER (6.5X22X2.5-MM THK)
67.	260-6696	[1]	WASHER-COPPER (14X22X2.4-MM THK)
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68930232

399-5841: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

399-5841 WIRING GP-COMMUNICATION -PL421
S/N DYB1-UP
PART OF 370-6980 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT

i05576991 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
392-4904	[1]	HARNESS AS-CONTROL (PRODUCT LINK)
317-1204 E		SLEEVE (300-CM)
9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
8T-8737	[6]	PLUG-SEAL
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
E		ORDER BY THE CENTIMETER

#SEBP68930233

333-1390: WIRING GP-CONSOLE

WIRING GP-CONSOLE

333-1390 WIRING GP-CONSOLE -OVERHEAD
S/N DYB1-UP
PART OF 384-7000 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i05301070 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[9]	STRAP-CABLE
2.	8E-1118	[1]	ANTENNA AS
3.	101-2640	[1]	CABLE AS-COAXIAL
4.	105-8034	[1]	SWITCH AS-LIMIT (DOOR)
5.	165-0311	[1]	PLUG
6.	167-8176	[2]	HOUSING (3-SWITCHES)
7.	168-8772	[2]	SPEAKER AS-RADIO
8.	333-1359 Y	[1]	HARNESS AS-CONSOLE (ENCLOSED ROPS)
9.	350-1230	[1]	SWITCH AS-ROCKER (BEACON)
10.	350-1231	[1]	SWITCH AS-ROCKER (REAR WIPER)(HAZARD)
11.	350-1232	[1]	SWITCH AS-ROCKER (ROADING LIGHTS)
12.	350-1233	[1]	SWITCH AS-ROCKER (FRONT WORK LIGHT)
13.	350-1234	[1]	SWITCH AS-ROCKER (REAR WORK LIGHTS)
			(EACH SWITCH AS INCLUDES)
	111-7899	[1]	GASKET
14.	2D-2751	[1]	GROMMET
15.	3S-2093	[9]	STRAP-CABLE
16.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
17.	8T-4970 M	[4]	BOLT (M6X1X14-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68930234

372-1880: WIRING GP-ENGINE

WIRING GP-ENGINE

372-1880 WIRING GP-ENGINE
S/N DYB1-UP
PART OF 381-4385 CHASSIS AR
ALSO AN ATTACHMENT

i05296402 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[20]	STRAP-CABLE
2.	8T-8799	[1]	BOOT (RED)
3.	132-1806	[1]	STRAP AS-GROUND
4.	200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
5.	300-1271	[1]	BRACKET
6.	333-1391	[1]	BRACKET AS
	159-9541 M	[1]	NUT-WELD (M10X1.5-THD)
7.	333-1418	[1]	CABLE AS (ALTERNATOR)
	8C-0596 E		CABLE (2-GA)(29-CM)
	278-1439	[1]	TERMINAL AS-RING
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	278-1438	[1]	TERMINAL-RING
	311-6185	[1]	TERMINAL AS
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	311-6184	[1]	TERMINAL-RING (2-GA, 3/8-IN SCREW)
8.	344-7391	[1]	SENSOR-PRESSURE (EJECTOR)(BRAKE CHARGE)
9.	349-1178	[1]	SENSOR-PRESSURE (AUTODIG)(HYDROSTATIC, FWD)
9A.	349-1178	[1]	SENSOR-PRESSURE (AUTODIG)(HYDROSTATIC, REV)
10.	356-0678	[1]	CABLE AS (ALTERNATOR)
	6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
	8T-8827	[1]	BOOT (RED)
	278-1439	[1]	TERMINAL AS-RING
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	278-1438	[1]	TERMINAL-RING
11.	370-6989	[1]	BRACKET AS
	159-9541 M	[3]	NUT-WELD (M10X1.5-THD)
12.	372-1881 Y	[1]	HARNESS AS-ENGINE
13.	132-5789	[2]	CLIP (LADDER)
14.	204-8000	[3]	MOUNTING-CABLE TIE
15.	309-4314	[2]	CLIP (LADDER)
16.	316-9351	[1]	MOUNTING-CABLE TIE
17.	3J-1907	[3]	SEAL-O-RING
18.	3S-2093	[12]	STRAP-CABLE
19.	4P-7581	[7]	CLIP (LADDER)
20.	4P-8134	[3]	CLIP (LADDER)
21.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
22.	7P-1695	[2]	WASHER (10.5X19X3-MM THK)
23.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4133 M	[1]	NUT (M10X1.5-THD)
25.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
26.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
27.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
28.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
29.	101-7401 M	[1]	BOLT-SOCKET HEAD (M10X1.5X20-MM)
30.	8S-0948	[1]	CLIP
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68930235

395-0113: WIRING GP-ENGINE

WIRING GP-ENGINE

395-0113 WIRING GP-ENGINE
S/N E7A1-UP
PART OF 371-1441 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT

i05332683 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	277-5064	[3]	SEAL-O-RING
2.	277-5065	[3]	CLIP
3.	124-3815 M	[4]	BOLT (M8X1.25X16-MM)
4.	217-9039	[1]	STRAP-CABLE
5.	348-4637	[1]	BOLT
6.	375-8407 Y	[3]	HARNESS AS-WIRING
7.	377-1293	[1]	BRACKET
8.	385-5997 Y	[1]	HARNESS AS-ENGINE
9.	389-3863	[1]	BRACKET
10.	392-2780	[1]	BRACKET
11.	132-5789	[1]	CLIP (LADDER)
12.	232-1693 M	[1]	BOLT-FLANGE HEAD (M6X1X35-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68930236

395-0113: WIRING GP-ENGINE

WIRING GP-ENGINE

395-0113 WIRING GP-ENGINE
S/N E7A1-UP
PART OF 371-1441 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT

i05954934 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	323-7347 C	[3]	SEAL-O-RING
2.	254-3633 CM	[3]	BOLT-FLANGE HEAD (M6X1X16-MM, SELF LOCKING)
3.	124-3815 M	[4]	BOLT (M8X1.25X16-MM)
4.	217-9039	[1]	STRAP-CABLE
5.	348-4637	[1]	BOLT
6.	458-3745 C	[3]	HARNESS AS-PLATFORM
			(EACH INCLUDES)
	332-7865	[1]	TIE-CABLE
7.	377-1293	[1]	BRACKET
8.	385-5997 Y	[1]	HARNESS AS-ENGINE
9.	389-3863	[1]	BRACKET
10.	392-2780	[1]	BRACKET
11.	132-5789	[1]	CLIP (LADDER)
12.	232-1693 M	[1]	BOLT-FLANGE HEAD (M6X1X35-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68930237

395-0113: WIRING GP-ENGINE

WIRING GP-ENGINE

395-0113 WIRING GP-ENGINE
S/N E7A1-UP
PART OF 371-1441 ENGINE AR-PRIMARY
Type 3
AN ATTACHMENT

i06932307 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	033-6034 C	[3]	SEAL-O-RING
2.	277-5065 C	[3]	CLIP
3.	124-3815 M	[4]	BOLT (M8X1.25X16-MM)
4.	217-9039	[1]	STRAP-CABLE
5.	348-4637	[1]	BOLT
6.	375-8407 CY	[3]	HARNESS AS-WIRING (INJECTOR)
7.	377-1293	[1]	BRACKET
8.	385-5997 Y	[1]	HARNESS AS-ENGINE
9.	389-3863	[1]	BRACKET
10.	392-2780	[1]	BRACKET
11.	132-5789	[1]	CLIP (LADDER)
12.	232-1693 M	[1]	BOLT-FLANGE HEAD (M6X1X35-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68930238

333-1420: WIRING GP-FRONT

WIRING GP-FRONT

333-1420 WIRING GP-FRONT
S/N DYB1-UP
PART OF 381-4385 CHASSIS AR
ALSO AN ATTACHMENT

i05307635 SEBP6893

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5V-6152	[4]	CLAMP
2.	5V-6153	[2]	PLATE-COVER
3.	7K-1181	[38]	STRAP-CABLE
4.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
5.	492-6475	[1]	BRACKET AS
6.	333-1421 Y	[1]	HARNESS AS-FRONT
7.	333-1423 Y	[2]	HARNESS AS-LIGHTING (HEADLIGHT)
8.	344-7391	[1]	SENSOR-PRESSURE (EJECTOR)(BRAKE OIL)
9.	445-4722	[1]	PLATE AS
10.	3J-1907	[1]	SEAL-O-RING
11.	4P-7581	[3]	CLIP (LADDER)
12.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
14.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
15.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
16.	8T-6974 M	[4]	BOLT (M6X1X80-MM)
17.	200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
18.	204-2281	[2]	STRAP-CABLE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68930239

372-1882: WIRING GP-FUEL PUMP

WIRING GP-FUEL PUMP

372-1882 WIRING GP-FUEL PUMP
S/N DYB1-216
PART OF 381-4385 CHASSIS AR

i05296408 SEBP6893

3721882 WIRING GP-FUEL PUMP Parts scheme

For full view, you need register

Parts for your 930K WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[9]	STRAP-CABLE
2.	256-6454	[1]	SENSOR-TEMPERATURE (2-PIN)(INTAKE MANIFOLD AIR)
3.	372-1883 Y	[1]	HARNESS AS-SENSOR
4.	316-9351	[8]	MOUNTING-CABLE TIE
5.	4P-7581	[2]	CLIP (LADDER)
6.	4P-8134	[2]	CLIP (LADDER)
7.	8T-5387	[2]	GROMMET
8.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
10.	8T-7524	[1]	SEAL-O-RING
11.	5P-8309 D		SEAL (0.18-M)
12.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
13.	260-5864	[1]	SWITCH GP-TOGGLE (FUEL PRIMING)
14.	305-3684	[1]	PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF)
15.	372-1872	[1]	BRACKET
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Alert Indicators
924K, 930K and 938K Wheel Loaders

Battery or Battery Cable - Inspect/Replace
924K, 930K and 938K Wheel Loaders

Battery Disconnect Switch
924K, 930K and 938K Wheel Loaders

Circuit Breakers - Reset
924K, 930K and 938K Wheel Loaders

Fuses - Replace
924K, 930K and 938K Wheel Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure to Install <NOBR>446-9301</NOBR> Work Tool Wiring Conversion Kit {1408}
Procedure to Install 446-9301 Work Tool Wiring Conversion Kit {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}

INSTALLATION / RETROFIT OF A REAR WIPER INTO CERTAIN 924K, 930K AND 938K SMALL WHEEL LOADERS{1408, 7301, 7305, 7306}
INSTALLATION / RETROFIT OF A REAR WIPER INTO CERTAIN 924K, 930K AND 938K SMALL WHEEL LOADERS{1408, 7301, 7305, 7306}

Installation Procedure for the TLV2 Seat Suspension Harness {1408, 7324}
Installation Procedure for the TLV2 Seat Suspension Harness {1408, 7324}

Technical Information Bulletin

Retain Failed 344-7391 Pressure Sensors For All 924K, 930K And 938K Small Wheel Loaders {1403, 1408, 1439, 5734}
Retain Failed 344-7391 Pressure Sensors For All 924K, 930K And 938K Small Wheel Loaders {1403, 1408, 1439, 5734}

Heated and Adjustable Mirrors May Fail Due to a Cut Wire in the Harness on Certain Wheel Loaders {1408, 7319}
Heated and Adjustable Mirrors May Fail Due to a Cut Wire in the Harness on Certain Wheel Loaders {1408, 7319}

Specifications

Solenoid Valve (Hydraulic Fan)
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Temperature Sensor (Hydraulic Oil)
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Temperature Sensor (Transmission Oil)
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Electronic Control Module
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Electrical Input Components
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Electrical Output Components
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Monitoring System
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Warning Operation
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Parking Brake
924K, 930K and 938K Wheel Loaders Electrohydraulic System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C7.1 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
924K, 930K and 938K Wheel Loaders InstrClstr/CMPD Monitoring

Wiring Harness (Open Circuit) - Test
924K, 930K and 938K Wheel Loaders InstrClstr/CMPD Monitoring

Wiring Harness (Short Circuit) - Test
924K, 930K and 938K Wheel Loaders InstrClstr/CMPD Monitoring

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Backlight Does Not Illuminate
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

Connector Locations
924K, 930K and 938K Wheel Loaders InstrClstr/CMPD Monitoring

Switch Circuits
924K, 930K and 938K Wheel Loaders InstrClstr/CMPD Monitoring

Connector Locations
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

Electrical Connector - Inspect
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

System Schematic
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

Connector Contact Description
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

CAN Data Link - Test
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

Cat Data Link - Test
924K, 930K and 938K Wheel Loaders Machine Electronic Control System

Idle Validation - Test
C4.4 and C7.1 Engines

Relay - Test - ECM Power Relay
C4.4 and C7.1 Engines

Relay - Test - Electric Fuel Lift Pump Relay
C4.4 and C7.1 Engines

Relay - Test - Start Relay
C4.4 and C7.1 Engines

Electrical Connectors - Inspect
C4.4 and C7.1 Engines

Electrical Connectors
C4.4 and C7.1 Engines

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Improved Fuel Level Sensor Assembly Is Now Used on Certain 924K, 930K, and 938K Wheel Loaders {1273, 1408, 1439, 7451}
2014/08/21

The Work Light Backlighting Diodes Are No Longer Used On Certain 924K, 930K, and 938K Small Wheel Loaders {1408, 1429, 1434}
2015/04/03

Installation /Retrofit of a Rear Wiper Into Certain 924K, 930K, and 938K Small Wheel Loaders is now Available {1408, 7301, 7305, 7306}
2015/08/05

Improved Routing is Now Used for the Seat Suspension Harness in TLV2 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2015/08/18

New Control Harness As Is Now Used on Certain 924K, 930K, and 938K Small Wheel Loaders {1408, 7606}
New Control Harness As Is Now Used on Certain 924K, 930K, and 938K Small Wheel Loaders {1408, 7606}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

An Improved Backup Alarm is Used on Certain K-Series Small Wheel Loaders and B3 Series SSL/MTL/CTLs {1408, 7051}
An Improved Backup Alarm is Used on Certain K-Series Small Wheel Loaders and B3 Series SSL/MTL/CTLs {1408, 7051}

Delayed Engine Shutdown Feature is Now Available for Certain 924K, 930K, and 938K Small Wheel Loaders {1000, 1408, 1416, 1901, 7490, 7610, 7620}
Delayed Engine Shutdown Feature is Now Available for Certain 924K, 930K, and 938K Small Wheel Loaders {1000, 1408, 1416, 1901, 7490, 7610, 7620}

A Process Improvement for the Installation of a Common Pressure Sensor on Various Machines {1354, 1403, 1408, 1439, 4304, 4334, 5051, 5057, 5734}
A Process Improvement for the Installation of a Common Pressure Sensor on Various Machines {1354, 1403, 1408, 1439, 4304, 4334, 5051, 5057, 5734}

A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}

An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324}
An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324}

Caterpillar Parts SIS Catalog 930K :

372-1860 WIRING GP-CAB

377-5623 WIRING GP-AUTOLUBE CONTROL

239-1134 VALVE GP-ETHER STARTING

297-8752 SWITCH GP-TOGGLE

255-2752 SWITCH GP-START

241-8368 SWITCH GP-MAGNETIC

7N-0718 SWITCH GP-DISCONNECT

350-4306 STARTING MOTOR GP-ELECTRIC

372-1930 WIRING GP-CHASSIS

399-5841 WIRING GP-COMMUNICATION

333-1390 WIRING GP-CONSOLE

372-1880 WIRING GP-ENGINE

395-0113 WIRING GP-ENGINE

333-1420 WIRING GP-FRONT

Truck sale:

Caterpillar 930K
- Wheel Loaders
HASTINGS DEERING (AUSTRALIA)

187,809

Caterpillar 930K, Wheel Loaders, Construction
- Wheel Loaders
HASTINGS DEERING (AUSTRALIA)

117,770

Caterpillar 930K, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA

164,333

Caterpillar 930K, Wheel Loaders, Construction
- Wheel Loaders
HASTINGS DEERING (AUSTRALIA)