HYDRAULIC SYSTEM
CYLINDER GPFILTER GP
CYLINDER GP
HYDRAULIC SYSTEM
CYLINDER GP#SEBP68930410
333-6541: CYLINDER & MTG GP-TILT
333-6541 CYLINDER & MTG GP-TILT
S/N DYB1-UP
PART OF 381-4394 CONTROL AR-BUCKET
AN ATTACHMENT
S/N DYB1-UP
PART OF 381-4394 CONTROL AR-BUCKET
AN ATTACHMENT
Parts for your 930K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 333-6648 | [1] | PIN AS | |
2. | 333-6652 | [1] | PIN AS | |
3. | 495-5996 Y | [1] | CYLINDER GP-TILT | |
4. | 347-8156 | [4] | SHIM (4-MM THK) | |
5. | 347-8157 | [2] | SHIM (2-MM THK) | |
6. | 7K-9210 | [4] | SEAL-LIP TYPE | |
7. | 7X-0618 | [2] | WASHER-HARD (13.5X40X5-MM THK) | |
8. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP68930411
333-6542: CYLINDER & MTG GP-TILT
333-6542 CYLINDER & MTG GP-TILT -HIGH LIFT
S/N DYB1-UP
PART OF 333-6549 CONTROL AR-BUCKET
AN ATTACHMENT
S/N DYB1-UP
PART OF 333-6549 CONTROL AR-BUCKET
AN ATTACHMENT
Parts for your 930K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 333-6648 | [1] | PIN AS | |
2. | 333-6652 | [1] | PIN AS | |
3. | 347-8156 B | [2] | SHIM (4-MM THK) | |
4. | 347-8157 B | [2] | SHIM (2-MM THK) | |
5. | 495-5997 Y | [1] | CYLINDER GP-TILT (HIGH LIFT) | |
6. | 7K-9210 | [4] | SEAL-LIP TYPE | |
7. | 7X-0618 | [2] | WASHER-HARD (13.5X40X5-MM THK) | |
8. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
B | USE AS REQUIRED | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP68930412
375-0724: CYLINDER GP-COUPLER
375-0724 CYLINDER GP-COUPLER
S/N DYB1-UP
50.8-MM (2-IN) BORE X 80-MM (3.15-IN) STROKE
PART OF 333-6550 COUPLER GP-QUICK
AN ATTACHMENT
S/N DYB1-UP
50.8-MM (2-IN) BORE X 80-MM (3.15-IN) STROKE
PART OF 333-6550 COUPLER GP-QUICK
AN ATTACHMENT
Parts for your 930K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 373-7021 J | [1] | VALVE GP-CHECK (QUICK COUPLER) | |
AVAILABLE REPAIR KIT(S): | ||||
122-9776 J | [1] | KIT-SEAL (CHECK VALVE) | ||
(INCLUDES O-RING SEALS & BACKUP WASHERS ) | ||||
367-5261 | [1] | KIT-SEAL (COUPLER CYLINDER) | ||
(INCLUDES PISTON RING, O-RING SEALS, BACKUP RING, U-CUP SEAL, MOISTURE EXCLUDER & WIPER) | ||||
J | KIT MARKED J SERVICES PART(S) MARKED J |
#SEBP68930413
495-5995: CYLINDER GP-LIFT
495-5995 CYLINDER GP-LIFT
S/N DYB1-UP
120-MM (4.7-IN) BORE X 728-MM (28.6-IN) STROKE
PART OF 333-6540 CYLINDER & MTG GP-LIFT
AN ATTACHMENT
S/N DYB1-UP
120-MM (4.7-IN) BORE X 728-MM (28.6-IN) STROKE
PART OF 333-6540 CYLINDER & MTG GP-LIFT
AN ATTACHMENT
Parts for your 930K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5K-9090 | [1] | SEAL-O-RING | |
2. | 324-0369 | [1] | PISTON AS | |
324-0368 | [1] | PISTON | ||
340-6339 J | [1] | SEAL-PISTON | ||
343-8053 J | [2] | RING-WEAR | ||
340-9314 J | [1] | SEAL-O-RING | ||
3. | 348-2248 | [1] | ROD AS | |
4. | 348-2249 | [1] | CYLINDER AS-LIFT | |
388-9520 | [1] | CAP AS | ||
4A. | 347-8189 | [1] | BEARING | |
5. | 350-3842 M | [2] | SETSCREW (M8X1.25X12.3-MM) | |
6. | 494-4316 Y | [1] | HEAD GP-HYDRAULIC CYLINDER | |
501-6695 FJ | [1] | KIT-HYD CYLINDER SEAL | ||
338-2446 | [1] | SEAL-U-CUP | ||
323-2474 | [1] | BUSHING | ||
340-9322 | [1] | SEAL-O-RING | ||
478-4178 | [1] | SEAL-WIPER | ||
F | NOT SHOWN | |||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP68930414
495-5996: CYLINDER GP-TILT
495-5996 CYLINDER GP-TILT
S/N DYB1-UP
150-MM (5.9-IN) BORE X 555-MM (21.9-IN) STROKE
PART OF 333-6541 CYLINDER & MTG GP-TILT
AN ATTACHMENT
S/N DYB1-UP
150-MM (5.9-IN) BORE X 555-MM (21.9-IN) STROKE
PART OF 333-6541 CYLINDER & MTG GP-TILT
AN ATTACHMENT
Parts for your 930K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5K-9090 | [1] | SEAL-O-RING | |
2. | 349-1715 | [1] | ROD AS | |
2A. | 333-6618 | [2] | BUSHING | |
3. | 349-1724 | [1] | PISTON AS | |
349-1723 | [1] | PISTON | ||
351-2187 J | [1] | SEAL-O-RING | ||
351-2190 J | [1] | SEAL-PISTON | ||
351-2193 J | [2] | RING-WEAR | ||
4. | 349-1725 | [1] | CYLINDER AS-TILT | |
110-7849 | [1] | LUG | ||
388-9521 | [1] | CAP AS | ||
4A. | 333-6618 | [2] | BUSHING | |
5. | 350-3842 M | [2] | SETSCREW (M8X1.25X12.3-MM) | |
6. | 494-4318 Y | [1] | HEAD GP-HYDRAULIC CYLINDER | |
501-6697 FJ | [1] | KIT-HYD CYLINDER SEAL | ||
351-2177 | [1] | SEAL-U-CUP | ||
351-2185 | [1] | SEAL-O-RING | ||
351-2182 | [1] | BEARING | ||
478-4183 | [1] | SEAL-WIPER | ||
F | NOT SHOWN | |||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP68930415
495-5997: CYLINDER GP-TILT
495-5997 CYLINDER GP-TILT -HIGH LIFT
S/N DYB1-UP
150-MM (5.9-IN) BORE X 555-MM (21.9-IN) STROKE
PART OF 333-6542 CYLINDER & MTG GP-TILT
AN ATTACHMENT
S/N DYB1-UP
150-MM (5.9-IN) BORE X 555-MM (21.9-IN) STROKE
PART OF 333-6542 CYLINDER & MTG GP-TILT
AN ATTACHMENT
Parts for your 930K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5K-9090 | [1] | SEAL-O-RING | |
2. | 349-1724 | [1] | PISTON AS | |
349-1723 | [1] | PISTON | ||
351-2187 J | [1] | SEAL-O-RING | ||
351-2190 J | [1] | SEAL-PISTON | ||
351-2193 J | [2] | RING-WEAR | ||
3. | 349-1725 | [1] | CYLINDER AS-TILT | |
110-7849 | [1] | LUG | ||
388-9521 | [1] | CAP AS | ||
3A. | 333-6618 | [2] | BUSHING | |
4. | 350-3842 M | [2] | SETSCREW (M8X1.25X12.3-MM) | |
5. | 352-6540 | [1] | ROD AS | |
5A. | 333-6618 | [1] | BUSHING | |
[1] | ROD | |||
[1] | EYE | |||
6. | 494-4318 Y | [1] | HEAD GP-HYDRAULIC CYLINDER | |
501-6697 FJ | [1] | KIT-HYD CYLINDER SEAL | ||
351-2177 F | [1] | SEAL-U-CUP | ||
351-2182 F | [1] | BEARING | ||
351-2193 F | [2] | RING-WEAR | ||
478-4183 F | [1] | SEAL-WIPER | ||
F | NOT SHOWN | |||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP68930416
339-6799: FILTER GP-OIL
Parts for your 930K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6V-3938 M | [4] | BOLT (M10X1.5X20-MM) | |
2. | 347-6907 | [1] | PLATE AS | |
3. | 368-0754 Y | [1] | FILTER GP-OIL (HYDRAULIC) | |
4. | 110-6349 | [1] | FITTING AS (QUICK DISCONNECT) | |
5. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
214-7568 | [1] | SEAL-O-RING | ||
6. | 3S-2093 | [2] | STRAP-CABLE | |
7. | 4P-8134 | [1] | CLIP (LADDER) | |
8. | 6V-0852 | [2] | CAP-DUST | |
9. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
10. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP68930417
349-6211: FILTER GP-OIL
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS#SEBP68930418
368-0754: FILTER GP-OIL
Parts for your 930K WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 349-6097 | [1] | SWITCH AS-PRESSURE (HYDRAULIC OIL) | |
033-6033 | [1] | SEAL-O-RING | ||
206-9295 | [1] | SEAL-O-RING | ||
2. | 349-6211 Y | [1] | FILTER GP-OIL (HYDRAULIC, TRANSMISSION) | |
3. | 370-2163 | [1] | BASE AS-FILTER | |
6V-5048 | [1] | SEAL-O-RING | ||
9S-4182 | [1] | PLUG (7/16-20-THD) | ||
9S-4191 | [1] | PLUG (9/16-18-THD) | ||
214-7568 | [1] | SEAL-O-RING | ||
Y | SEPARATE ILLUSTRATION |
#SEBP68930419
494-4316: HEAD GP-HYDRAULIC CYLINDER
494-4316 HEAD GP-HYDRAULIC CYLINDER
S/N DYB1-UP
PART OF 495-5995 CYLINDER GP-LIFT
AN ATTACHMENT
S/N DYB1-UP
PART OF 495-5995 CYLINDER GP-LIFT
AN ATTACHMENT
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Lift Cylinder Leaks on Certain 924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders {5102, 7555}
Lift Cylinder Leaks on Certain 924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders {5102, 7555}
Lift Cylinder Leaks on Certain 924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders {5102, 7555}
Tilt Cylinder Leaks on Certain 924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders {5104}
Tilt Cylinder Leaks on Certain 924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders {5104}
Tilt Cylinder Leaks on Certain 924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders {5104}
Hydraulic Cylinder Group May Leak Oil on Certain 924K, 930K, 938K, and 938M Small Wheel Loaders {4303, 7562}
Hydraulic Cylinder Group May Leak Oil on Certain 924K, 930K, 938K, and 938M Small Wheel Loaders {4303, 7562}
Hydraulic Cylinder Group May Leak Oil on Certain 924K, 930K, 938K, and 938M Small Wheel Loaders {4303, 7562}
Excessive Wear in the Implement Pump Compensator May Cause Low-Pressure Output and Slow Implement Response on 924K, 926M, 930K, 930M, 938K, and 938M Small Wheel Loaders {4303, 5102, 5104}
Excessive Wear in the Implement Pump Compensator May Cause Low-Pressure Output and Slow Implement Response on 924K, 926M, 930K, 930M, 938K, and 938M Small Wheel Loaders {4303, 5102, 5104}
Excessive Wear in the Implement Pump Compensator May Cause Low-Pressure Output and Slow Implement Response on 924K, 926M, 930K, 930M, 938K, and 938M Small Wheel Loaders {4303, 5102, 5104}
Specifications
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
New Lift Cylinder Groups with Improved Wiper Seals Now Being Used on Certain Small Wheel Loaders {5102, 7555}
New Lift Cylinder Groups with Improved Wiper Seals Now Being Used on Certain Small Wheel Loaders {5102, 7555}
New Lift Cylinder Groups with Improved Wiper Seals Now Being Used on Certain Small Wheel Loaders {5102, 7555}
New Tilt Cylinder Groups with Improved Wiper Seals for Dirt Exclusion Are Now Used on Certain Small Wheel Loaders {5104}
New Tilt Cylinder Groups with Improved Wiper Seals for Dirt Exclusion Are Now Used on Certain Small Wheel Loaders {5104}
New Tilt Cylinder Groups with Improved Wiper Seals for Dirt Exclusion Are Now Used on Certain Small Wheel Loaders {5104}