POWER TRAIN
PUMP GPWHEEL GP
POWER TRAIN
PUMP GP
#SEBP68960340
333-6535: PUMP & MTG GP-GEAR
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 307-3079 JY | [1] | PUMP GP-GEAR (CHARGE, HYDROSTATIC DRIVE) | |
| 2. | 101-7404 M | [2] | BOLT-SOCKET HEAD (M10X1.5X30-MM) | |
| 3. | 177-0344 | [1] | SEAL-O-RING | |
| 4. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 358-4979 J | [1] | KIT-SEAL (HYDROSTATIC PUMP) | ||
| (INCLUDES SEALS, SHAFT SEALS, BACKUP SEALS & RETAINING RING) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68960341
333-6912: PUMP & MTG GP-HYDROSTATIC
333-6912 PUMP & MTG GP-HYDROSTATIC
S/N XXT1-UP
PART OF 381-4364 POWER TRAIN AR
S/N XXT1-UP
PART OF 381-4364 POWER TRAIN AR
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 285-2663 | [2] | FITTING AS (QUICK DISCONNECT, MALE) | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 285-2664 | [1] | FITTING | ||
| 2. | 307-3065 Y | [1] | PUMP GP-PISTON (HYDROSTATIC) | |
| 3. | 8T-4193 M | [4] | BOLT (M16X2X50-MM) | |
| 4. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 5. | 378-2818 | [1] | COUPLER-PUMP | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68960342
307-3079: PUMP GP-GEAR
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-5095 | [4] | WASHER-PLATED (11X16X2-MM THK) | |
| 2. | 7X-2547 M | [4] | BOLT (M10X1.5X200-MM) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 358-4979 | [1] | KIT-SEAL (HYDROSTATIC PUMP) | ||
| (INCLUDES PARTS MARKED "J" IN GRAPHIC ) | ||||
| M | METRIC PART | |||
#SEBP68960343
307-3065: PUMP GP-PISTON
307-3065 PUMP GP-PISTON
S/N XXT1-UP
PART OF 333-6912 PUMP & MTG GP-HYDROSTATIC
FIELD REPLACEMENT ORDER @@@@@487-6225@@@@@
S/N XXT1-UP
PART OF 333-6912 PUMP & MTG GP-HYDROSTATIC
FIELD REPLACEMENT ORDER @@@@@487-6225@@@@@
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 302-5738 | [1] | RING-RETAINING | |
| 3. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 4. | 3J-1907 | [2] | SEAL-O-RING | |
| 5. | 121-9910 | [1] | RING | |
| 6. | 121-9911 | [1] | BEARING | |
| 7. | 378-2808 | [1] | SHAFT | |
| 8. | 8U-9480 | [2] | PIN | |
| 9. | 121-9913 | [2] | BEARING | |
| 11. | 121-9931 | [1] | WASHER-SPECIAL | |
| 12. | 6Y-2737 | [1] | CUP-BEARING | |
| 13. | 378-2828 | [1] | SHIM-PACK (INCLUDES 8-SHIMS) | |
| 14. | 378-2814 | [2] | VALVE GP-RELIEF (PISTON PUMP) | |
| (EACH INCLUDES) | ||||
| 192-7112 | [1] | SEAL-O-RING | ||
| 15. | 378-2815 | [1] | VALVE GP-RELIEF (PISTON PUMP) | |
| 9X-4619 | [1] | SEAL-O-RING | ||
| 16. | 378-2836 | [1] | PLATE-VALVE | |
| 17. | 101-2862 | [2] | DOWEL | |
| 18. | 121-9942 | [2] | PIPE | |
| 19. | 373-1079 | [2] | KIT-PISTON (ACTUATOR) | |
| (EACH INCLUDES PISTION, WASHER, SPRING, RETAINER, SEALS & SHIMS) | ||||
| 21. | 6V-5192 M | [4] | BOLT-SOCKET HEAD (M8X1.25X30-MM) | |
| 22. | 487-6187 | [1] | KIT-LEVER CONTROL | |
| (INCLUDES SCREWS, RING, RING SHIMS, PIN SPRINGS & LEVER) | ||||
| 23. | 378-2817 Y | [1] | VALVE GP-PUMP CONTROL | |
| 24. | 160-8493 M | [3] | BOLT-SOCKET HEAD (M14X2X80-MM) | |
| 25. | 095-0692 M | [4] | BOLT-SOCKET HEAD (M14X2X110-MM) | |
| 26. | 9T-4912 P | [1] | SEAL-LIP TYPE | |
| 27. | 6Y-2736 | [1] | CONE-BEARING | |
| 28. | 223-2321 | [2] | KIT-WASHER (HYDRAULIC PUMP, MOTOR) | |
| (EACH KIT INCLUDES PLATES, SHIMS & WASHERS) | ||||
| 29. | 487-6219 | [1] | KIT-BARREL | |
| 30. | 487-6200 | [1] | KIT-SWASHPLATE | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 376-8210 P | [1] | KIT-SEAL (PISTON PUMP) | ||
| (INCLUDES RINGS & SEALS) | ||||
| (ALSO INCLUDES PARTS MARKED " J " IN GRAPHIC) | ||||
| M | METRIC PART | |||
| P | KIT MARKED P SERVICES PART(S) MARKED P | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68960344
487-6225: PUMP GP-PISTON
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 302-5738 | [1] | RING-RETAINING | |
| 2. | 223-2321 | [2] | KIT-WASHER (HYDRAULIC PUMP, MOTOR) | |
| (INCLUDES SHIMS, WASHERS & PLATES) | ||||
| 3. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 4. | 3J-1907 | [2] | SEAL-O-RING | |
| 5. | 121-9910 | [1] | RING | |
| 6. | 121-9911 | [1] | BEARING | |
| 7. | [1] | PLATE | ||
| 8. | 8U-9480 | [2] | PIN | |
| 9. | 121-9913 | [2] | BEARING | |
| 10. | 487-6200 | [1] | KIT-SWASHPLATE | |
| 11. | 121-9931 | [1] | WASHER-SPECIAL | |
| 12. | 6Y-2737 | [1] | CUP-BEARING | |
| 13. | 378-2828 | [1] | SHIM-PACK (INCLUDES 8-SHIMS) | |
| (INCLUDES SHIMS) | ||||
| 14. | 378-2814 | [2] | VALVE GP-RELIEF | |
| (EACH INCLUDES) | ||||
| 192-7112 | [1] | SEAL-O-RING | ||
| 15. | 378-2815 | [1] | VALVE GP-RELIEF | |
| 9X-4619 | [1] | SEAL-O-RING | ||
| 16. | 378-2836 | [1] | PLATE-VALVE | |
| 17. | 101-2862 | [2] | DOWEL | |
| 18. | 121-9942 | [2] | PIPE | |
| 19. | 373-1079 | [2] | KIT-PISTON (ACTUATOR) | |
| (EACH INCLUDES WASHER, SPRING, RETAINER, SHIM & PISTON-ACTUATOR) | ||||
| 20. | 6V-5192 M | [4] | BOLT-SOCKET HEAD (M8X1.25X30-MM) | |
| 21. | 487-6187 | [1] | KIT-LEVER CONTROL | |
| (INCLUDES SCREWS, RING, SHIMS, PIN-SPRINGS & LEVER) | ||||
| 22. | 378-2817 Y | [1] | VALVE GP-PUMP CONTROL (BASIC) | |
| 23. | 160-8493 M | [3] | BOLT-SOCKET HEAD (M14X2X80-MM) | |
| 24. | 095-0692 M | [4] | BOLT-SOCKET HEAD (M14X2X110-MM) | |
| 25. | 9T-4912 | [1] | SEAL-LIP TYPE | |
| 26. | 6Y-2736 | [1] | CONE-BEARING | |
| 27. | 376-8210 | [1] | KIT-SEAL (PISTON PUMP) | |
| (INCLUDES SEAL-O-RINGS) | ||||
| (ALSO INCLUDES PARTS MARKED 'H' IN GRAPHICS) | ||||
| 28. | 487-6219 | [1] | KIT-BARREL | |
| (INCLUDES SHIMS) | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68960345
376-0835: RIM AR
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 357-8891 Y | [4] | RIM GP-DEMOUNTABLE (17X25, 3-PIECE) | ||
| 357-8880 | [1] | MOUNTING GP-RIM | ||
| 8C-6913 | [64] | WASHER-HARD (24X41.5X4-MM THK) | ||
| 357-5005 M | [64] | BOLT (M22X1.5X50-MM) | ||
| 366-6918 | [1] | STOP GP-AXLE OSCILLATION | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | ||
| 349-8175 | [2] | PLATE | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68960346
376-0836: RIM AR
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 357-8881 Y | [4] | RIM GP-DEMOUNTABLE (17X25, 3-PIECE) | ||
| 357-8880 | [1] | MOUNTING GP-RIM | ||
| 8C-6913 | [64] | WASHER-HARD (24X41.5X4-MM THK) | ||
| 357-5005 M | [64] | BOLT (M22X1.5X50-MM) | ||
| 366-6918 | [1] | STOP GP-AXLE OSCILLATION | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | ||
| 349-8175 | [2] | PLATE | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68960347
376-0837: RIM AR
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 373-7673 Y | [4] | RIM GP-DEMOUNTABLE (3-PIECE, OFFSET) | ||
| 357-8880 | [1] | MOUNTING GP-RIM | ||
| 8C-6913 | [64] | WASHER-HARD (24X41.5X4-MM THK) | ||
| 357-5005 M | [64] | BOLT (M22X1.5X50-MM) | ||
| 366-6918 | [1] | STOP GP-AXLE OSCILLATION | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | ||
| 349-8175 | [2] | PLATE | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68960348
376-0839: RIM AR
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 373-8109 Y | [4] | RIM GP-DEMOUNTABLE (26X20) | ||
| 376-0506 Y | [1] | EXTENSION GP-FENDER | ||
| 357-8880 | [1] | MOUNTING GP-RIM | ||
| 8C-6913 | [64] | WASHER-HARD (24X41.5X4-MM THK) | ||
| 357-5005 M | [64] | BOLT (M22X1.5X50-MM) | ||
| 367-4269 | [1] | STOP GP-AXLE OSCILLATION | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | ||
| 366-6917 | [2] | PLATE | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68960349
376-0842: RIM AR
For full view, you need register
Parts for your 938K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 376-0506 Y | [1] | EXTENSION GP-FENDER | ||
| 373-8112 Y | [4] | RIM GP-DEMOUNTABLE (1-PIECE, OFFSET) | ||
| 357-8880 | [1] | MOUNTING GP-RIM | ||
| 357-5005 M | [64] | BOLT (M22X1.5X50-MM) | ||
| 452-6897 | [64] | WASHER-HARD (24X41.5X4-MM THK) | ||
| 367-4269 | [1] | STOP GP-AXLE OSCILLATION | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | ||
| 366-6917 | [2] | PLATE | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
