AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

980H Wheel Loader Supplemental Parts Information for the U.S. Military PF800001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



WHEEL LOADER 980H WHEEL LOADER PF8
 980H Wheel Loader Supplemental Parts Information for the U.S. Military PF800001-UP (MACHINE) SEBP7025 980H PF8   (2013)

Parts group 980H:

  For full view, you need register
HYDRAULIC SYSTEM
CYLINDER GP
CYLINDER & MTG GP-TILT
261-6898 CYLINDER & MTG GP-TILT
261-6898 CYLINDER & MTG GP-TILT
MAST
PART OF 465-0685 HANDLER AR-CONTAINER
CYLINDER GP-TILT
256-9306 CYLINDER GP-TILT
256-9306 CYLINDER GP-TILT
114.3-MM (4.5-IN) BORE X 469-MM (18.5-IN)
PART OF 261-6898 CYLINDER & MTG GP-TILT
LINES GP-AUXILIARY
LINES GP-AUXILIARY HYDRAULIC
260-4820 LINES GP-AUXILIARY HYDRAULIC
260-4820 LINES GP-AUXILIARY HYDRAULIC
PART OF 465-0685 HANDLER AR-CONTAINER
LINES GP-CYLINDER
LINES GP-LIFT CYLINDER
466-2420 LINES GP-LIFT CYLINDER
466-2420 LINES GP-LIFT CYLINDER -FORK CARRIAGE
PART OF 465-0685 HANDLER AR-CONTAINER
LINES GP-TILT CYLINDER
260-4819 LINES GP-TILT CYLINDER
260-4819 LINES GP-TILT CYLINDER
MAST
PART OF 465-0685 HANDLER AR-CONTAINER
LINES GP-HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
260-4820 LINES GP-AUXILIARY HYDRAULIC
260-4820 LINES GP-AUXILIARY HYDRAULIC
PART OF 465-0685 HANDLER AR-CONTAINER
PUMP GP
PUMP & MTG GP-IMPLEMENT
261-6901 PUMP & MTG GP-IMPLEMENT
261-6901 PUMP & MTG GP-IMPLEMENT
PART OF 465-0685 HANDLER AR-CONTAINER
PUMP GP-GEAR
256-3682 PUMP GP-GEAR
256-3682 PUMP GP-GEAR
PART OF 261-6901 PUMP & MTG GP-IMPLEMENT
VALVE GP-CONTROL
VALVE GP-CONTROL
467-2619 VALVE GP-CONTROL
467-2619 VALVE GP-CONTROL
MODIFICATION
PART OF 465-0685 HANDLER AR-CONTAINER
VALVE GP-RELIEF
VALVE GP-RELIEF
6E-2377 VALVE GP-RELIEF
6E-2377 VALVE GP-RELIEF
DIRECT OPERATED
PART OF 467-2619 VALVE GP-CONTROL
VALVE GP-RELIEF
9T-3533 VALVE GP-RELIEF
9T-3533 VALVE GP-RELIEF
PART OF 467-2619 VALVE GP-CONTROL
VALVE GP-RELIEF
135-5489 VALVE GP-RELIEF
135-5489 VALVE GP-RELIEF
MODIFICATION
PART OF 467-2619 VALVE GP-CONTROL
VALVE GP-RELIEF
346-3796 VALVE GP-RELIEF
346-3796 VALVE GP-RELIEF -DIRECT OPERATED
PART OF 6E-2377, 9T-3533 VALVE GP-RELIEF

Information:

(For parts list, see above)

Operation and Maintenance Manual
Ride Control Accumulator - Check
980H Wheel Loader
Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Procedure to Install the <NOBR>394-3190</NOBR> Ride Control Kit on 980H Wheel Loaders {0679, 1435, 5004, 5051, 5077}
Procedure to Install the 394-3190 Ride Control Kit on 980H Wheel Loaders {0679, 1435, 5004, 5051, 5077}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RIDE CONTROL CHECK VALVE ON CERTAIN 980H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RIDE CONTROL CHECK VALVE ON CERTAIN 980H MEDIUM WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Ride Control Accumulator - Uncharged
980H Wheel Loader Electrohydraulic System
Accumulator (Steering)
980H Wheel Loader Steering System
Ride Control Accumulator
980H Wheel Loader Electrohydraulic System
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RIDE CONTROL CHECK VALVE ON CERTAIN 980H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RIDE CONTROL CHECK VALVE ON CERTAIN 980H MEDIUM WHEEL LOADERS
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Ride Control Accumulator - Test and Charge
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Pilot Oil Accumulator - Test
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Ride Control Pressure Equalization Time - Adjust
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Disassembly and Assembly
Ride Control Accumulator - Remove and Install
980H Wheel Loader Machine Systems
Service Magazine
An Improved Ride Control Check Valve Is Used On Certain 980H Medium Wheel Loaders {5004, 5051, 5067, 5077}
An Improved Ride Control Check Valve Is Used On Certain 980H Medium Wheel Loaders {5004, 5051, 5067, 5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Operation and Maintenance Manual
Ride Control Accumulator - Check
980H Wheel Loader
Special Instruction
Procedure to Install the <NOBR>394-3190</NOBR> Ride Control Kit on 980H Wheel Loaders {0679, 1435, 5004, 5051, 5077}
Procedure to Install the 394-3190 Ride Control Kit on 980H Wheel Loaders {0679, 1435, 5004, 5051, 5077}
Specifications
Ride Control Valve
980H Wheel Loader Electrohydraulic System
Ride Control Accumulator - Uncharged
980H Wheel Loader Electrohydraulic System
Ride Control Accumulator
980H Wheel Loader Electrohydraulic System
Systems Operation
Ride Control System
980H Wheel Loader Electrohydraulic System
Testing and Adjusting
Ride Control Accumulator - Test and Charge
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Ride Control Pressure Equalization Time - Adjust
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Disassembly and Assembly
Ride Control Accumulator - Remove and Install
980H Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Remove and Install
980H Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Disassemble
980H Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Assemble
980H Wheel Loader Machine Systems
Service Magazine
Improved Spring Housings Now Available for 988K and 980H2 Wheel Loader Ride Control Valves {5004, 5054, 5066}
2014/09/25
An Improved Ride Control Check Valve Is Used On Certain 980H Medium Wheel Loaders {5004, 5051, 5067, 5077}
An Improved Ride Control Check Valve Is Used On Certain 980H Medium Wheel Loaders {5004, 5051, 5067, 5077}
Specifications
Hydraulic Oil Cooler Lines Group
980H Wheel Loader Machine Systems
Systems Operation
Oil Coolers and Cooling System Operation
980H Wheel Loader Electrohydraulic System
Disassembly and Assembly
Cooling System Package (Radiator, Fan Group, Aftercooler, Hydraulic Oil Cooler, Refrigerant Condenser) - Remove and Install
980H Wheel Loader Engine Supplement
Hydraulic Oil Cooler - Remove and Install
980H Wheel Loader Engine Supplement
Service Magazine
New Fan Pump Load Sense Hose Assembly Is Now Used on Certain 980H Wheel Loaders {1374, 5057}
2015/04/22
Operation and Maintenance Manual
Bucket Linkage and Loader Cylinder Bearings - Lubricate
980H Wheel Loader
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Tilt Cylinder (High Lift)
980H Wheel Loader Electrohydraulic System
Hood Tilt Cylinder
980H Wheel Loader Electrohydraulic System
Tilt Cylinder
980H Wheel Loader Electrohydraulic System
Tilt Cylinder
980H Wheel Loader Electrohydraulic System
Lift Cylinder
980H Wheel Loader Electrohydraulic System
Tilt Cylinder (Block Handling Machines)
980H Wheel Loader Electrohydraulic System
Steering Cylinder and Mounting
980H Wheel Loader Steering System
Steering Cylinder and Mounting
980H Wheel Loader Steering System
Tilt Cylinder (Block Handling Machines)
980H Wheel Loader Electrohydraulic System
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Implement Hydraulic Service Mode
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Implement Cycle Time - Check
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Lift and Tilt Cylinder Drift - Check
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Hood Tilt Cylinder - Remove and Install
980H Wheel Loader Engine Supplement
Tilt Cylinder - Remove and Install
980H Wheel Loader Machine Systems
Lift Cylinder - Remove and Install
980H Wheel Loader Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Improved Tilt Cylinder Rod Seals Are Used on Certain 980H Medium Wheel Loaders {5104, 7555}
2013/10/11
Additional Hydraulic Oil Additive Now Used for Lift Cylinders on Medium Wheel Loaders {4303, 5095, 5095, 5102, 5104}
2015/08/28
Specifications
Fasteners
980H Wheel Loader Machine Systems
Operation and Maintenance Manual
Oil Filter - Inspect
980H Wheel Loader
Hydraulic System Oil Filter - Replace
980H Wheel Loader
Hydraulic System Biodegradable Oil Filter Element - Replace
980H Wheel Loader
Special Instruction
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Oil Filter (Hydraulic)
980H Wheel Loader Electrohydraulic System
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Improved Hydraulic Oil Filter Bypass Indicator Is Now Available for Certain Cat Machines {5068}
Improved Hydraulic Oil Filter Bypass Indicator Is Now Available for Certain Cat Machines {5068}
Systems Operation
Sensors
980H Wheel Loader
Troubleshooting
MID 074 - CID 0350 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 13
Payload Control System (PCS) 2.X
Service Magazine
Improved Position Sensor Gp Is Now Used on Certain Medium and Large Wheel Loaders {5702, 5736}
2015/03/17
Special Instruction
Procedure to Install the 394-3191 Third Function Hydraulic Kit for the LRC 980H Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Procedure to Install the 394-3191 Third Function Hydraulic Kit for the LRC 980H Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Procedure to Install the <NOBR>394-3190</NOBR> Ride Control Kit on 980H Wheel Loaders {0679, 1435, 5004, 5051, 5077}
Procedure to Install the 394-3190 Ride Control Kit on 980H Wheel Loaders {0679, 1435, 5004, 5051, 5077}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RIDE CONTROL CHECK VALVE ON CERTAIN 980H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RIDE CONTROL CHECK VALVE ON CERTAIN 980H MEDIUM WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
An Improved Ride Control Check Valve Is Used On Certain 980H Medium Wheel Loaders {5004, 5051, 5067, 5077}
An Improved Ride Control Check Valve Is Used On Certain 980H Medium Wheel Loaders {5004, 5051, 5067, 5077}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Procedure to Install the 394-3191 Third Function Hydraulic Kit for the LRC 980H Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Procedure to Install the 394-3191 Third Function Hydraulic Kit for the LRC 980H Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Hydraulic Oil Cooler Lines Group
980H Wheel Loader Machine Systems
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Testing and Adjusting
Hydraulic Fan Speed - Test and Adjust
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Service Magazine
New Fan Pump Load Sense Hose Assembly Is Now Used on Certain 980H Wheel Loaders {1374, 5057}
2015/04/22
Special Instruction
Procedure to Install the 394-3191 Third Function Hydraulic Kit for the LRC 980H Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Procedure to Install the 394-3191 Third Function Hydraulic Kit for the LRC 980H Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Operation and Maintenance Manual
Hydraulic Tank Breaker Relief Valve - Clean
980H Wheel Loader
Case Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - Clean
980H Wheel Loader
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Procedure to Install the 394-3191 Third Function Hydraulic Kit for the LRC 980H Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Procedure to Install the 394-3191 Third Function Hydraulic Kit for the LRC 980H Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC TANK VALVE BREAKER ON CERTAIN 980H MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC TANK VALVE BREAKER ON CERTAIN 980H MEDIUM WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Breaker Relief Valve
980H Wheel Loader Electrohydraulic System
Hydraulic Oil Lines
980H Wheel Loader Electrohydraulic System
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC TANK VALVE BREAKER ON CERTAIN 980H MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC TANK VALVE BREAKER ON CERTAIN 980H MEDIUM WHEEL LOADERS
Service Letter-Asia
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC TANK VALVE BREAKER ON CERTAIN 980H MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC TANK VALVE BREAKER ON CERTAIN 980H MEDIUM WHEEL LOADERS
Service Magazine
New Fan Pump Load Sense Hose Assembly Is Now Used on Certain 980H Wheel Loaders {1374, 5057}
2015/04/22
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Special Instruction
Procedure to Install the <NOBR>394-3194</NOBR> Auto Reversing Fan Kit on 980H Wheel Loaders {1353, 1356, 1386, 138R}
Procedure to Install the 394-3194 Auto Reversing Fan Kit on 980H Wheel Loaders {1353, 1356, 1386, 138R}
Testing and Adjusting
Hydraulic Fan Speed - Test and Adjust
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Testing and Adjusting
Pilot System Pressure - Test
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Operation and Maintenance Manual
Ride Control Accumulator - Check
980H Wheel Loader
Special Instruction
Procedure to Install the <NOBR>394-3190</NOBR> Ride Control Kit on 980H Wheel Loaders {0679, 1435, 5004, 5051, 5077}
Procedure to Install the 394-3190 Ride Control Kit on 980H Wheel Loaders {0679, 1435, 5004, 5051, 5077}
Specifications
Ride Control Valve
980H Wheel Loader Electrohydraulic System
Testing and Adjusting
Ride Control Accumulator - Test and Charge
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Disassembly and Assembly
Ride Control Accumulator - Remove and Install
980H Wheel Loader Machine Systems
Service Magazine
An Improved Ride Control Check Valve Is Used On Certain 980H Medium Wheel Loaders {5004, 5051, 5067, 5077}
An Improved Ride Control Check Valve Is Used On Certain 980H Medium Wheel Loaders {5004, 5051, 5067, 5077}
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Operation and Maintenance Manual
Case Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - Clean
980H Wheel Loader
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Procedure to Install the <NOBR>394-3194</NOBR> Auto Reversing Fan Kit on 980H Wheel Loaders {1353, 1356, 1386, 138R}
Procedure to Install the 394-3194 Auto Reversing Fan Kit on 980H Wheel Loaders {1353, 1356, 1386, 138R}
Specifications
Piston Motor (Hydraulic Fan)
980H Wheel Loader Electrohydraulic System
Fasteners
980H Wheel Loader Machine Systems
Radiator and Fan
980H Wheel Loader Machine Systems
Systems Operation
Sensors
980H Wheel Loader
Hydraulic Fan System
980H Wheel Loader Electrohydraulic System
Hydraulic Fan System - Automatic Reversing Fan
980H Wheel Loader Electrohydraulic System
Piston Motor (Hydraulic Fan)
980H Wheel Loader Electrohydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Hydraulic Fan Speed - Test and Adjust
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Troubleshooting
Cooling Fan Control - Test
C15 and C18 Engines for Caterpillar Built Machines
Cooling Fan Reversing - Test
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove and Install
980H Wheel Loader Engine Supplement
Specifications
Main Control Valve and Mounting - Block Handling
980H Wheel Loader Electrohydraulic System
Main Control Valve and Mounting
980H Wheel Loader Electrohydraulic System
Operation and Maintenance Manual
Case Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - Clean
980H Wheel Loader
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Specifications
Solenoid Valve (Demand Fan)
980H Wheel Loader Electrohydraulic System
Piston Pump (Hydraulic Fan)
980H Wheel Loader Electrohydraulic System
Gear Pump (Pilot, Brake)
980H Wheel Loader Electrohydraulic System
Hood Tilt Pump and Motor
980H Wheel Loader Electrohydraulic System
Gear Pump (Implement)
980H Wheel Loader Electrohydraulic System
Pump Control Valve
980H Wheel Loader Electrohydraulic System
Systems Operation
Gear Pump (Implement)
980H Wheel Loader Electrohydraulic System
Gear Pump (Pilot, Brake)
980H Wheel Loader Electrohydraulic System
Hydraulic Fan System
980H Wheel Loader Electrohydraulic System
Hydraulic Fan System - Automatic Reversing Fan
980H Wheel Loader Electrohydraulic System
Piston Pump (Hydraulic Fan)
980H Wheel Loader Electrohydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Hydraulic Fan Speed - Test and Adjust
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Torque Converter Stall and Implement Pump Double Stall - Test
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Disassembly and Assembly
Gear Pump (Pilot, Brake) - Disassemble
980H Wheel Loader Machine Systems
Gear Pump (Pilot, Brake) - Assemble
980H Wheel Loader Machine Systems
Gear Pump (Implement) - Disassemble
980H Wheel Loader Machine Systems
Gear Pump (Implement) - Assemble
980H Wheel Loader Machine Systems
Piston Pump (Hydraulic Fan) - Remove
980H Wheel Loader Machine Systems
Piston Pump (Hydraulic Fan) - Install
980H Wheel Loader Machine Systems
Piston Pump (Hydraulic Fan) - Disassemble
980H Wheel Loader Machine Systems
Piston Pump (Hydraulic Fan) - Assemble
980H Wheel Loader Machine Systems
Hood Tilt Pump and Motor - Remove and Install
980H Wheel Loader Engine Supplement
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove and Install
980H Wheel Loader Engine Supplement
Gear Pump (Implement) - Remove and Install
980H Wheel Loader Machine Systems
Gear Pump (Secondary Steering) - Remove and Install
980H Wheel Loader Machine Systems
Gear Pump (Pilot, Brake) - Remove and Install
980H Wheel Loader Machine Systems
Service Magazine
An Improved Pump Gp Is Now Used on Certain 980H, 980K, 980M, and 982M Wheel Loaders {506H, 5073, 5927}
2015/02/16

Truck sale:

Caterpillar 980H
 
Caterpillar 980H
- Wheel Loaders
FOLEY, INC.
Caterpillar 980H, Wheel Loaders, Construction
122,414 
Caterpillar 980H, Wheel Loaders, Construction
- Wheel Loaders
SOTREQ S.A.
Caterpillar 980H, Wheel Loaders, Construction
131,000 
Caterpillar 980H, Wheel Loaders, Construction
- Wheel Loaders
BOYD CAT COMPANY
Caterpillar 980H, Wheel Loaders, Construction
97,000 
Caterpillar 980H, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980H, Wheel Loaders, Construction
448,873 
Caterpillar 980H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.