COOLING SYSTEM
REGULATOR GP-TEMPERATURELINES GP-WATER
PUMP GP-WATER
RADIATOR GP
COOLING SYSTEM
REGULATOR GP-TEMPERATURE
#SEBP70430210
425-3124: PLUG GP-TEMP REGULATOR HOUSING
425-3124 PLUG GP-TEMP REGULATOR HOUSING -UPPER
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS#SEBP70430211
439-1934: PLUG GP-WATER LINES
439-1934 PLUG GP-WATER LINES
CANNOT BE USED WITH ENGINE WITH TURBOCHARGER LINES GROUP
AN ATTACHMENT
CANNOT BE USED WITH ENGINE WITH TURBOCHARGER LINES GROUP
AN ATTACHMENT
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) |
#SEBP70430212
464-5985: PLUG GP-WATER LINES
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) |
#SEBP70430213
334-8471: PUMP GP-AUXILIARY WATER
334-8471 PUMP GP-AUXILIARY WATER
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 235-3546 | [1] | SEAL-O-RING | |
| 2. | 424-3625 CY | [1] | PUMP GP-AUXILIARY WATER | |
| 3. | 0S-1594 | [7] | BOLT (3/8-16X1-IN) | |
| 4. | 1T-0765 | [1] | BOLT (3/8-16X1-IN) | |
| 5. | 6V-3348 | [1] | SEAL-O-RING | |
| 6. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 5N-1939 | [1] | COVER | |
| 8. | 5N-1940 | [1] | GASKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP70430214
424-3625: PUMP GP-AUXILIARY WATER
424-3625 PUMP GP-AUXILIARY WATER
PART OF 334-8471 PUMP GP-AUXILIARY WATER
Type 1
PART OF 334-8471 PUMP GP-AUXILIARY WATER
Type 1
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 2. | 9X-4594 | [1] | SEAL-LIP TYPE | |
| 3. | 262-4378 | [1] | SEAL AS-WATER PUMP | |
| 4. | 3J-1907 | [1] | SEAL-O-RING | |
| 5. | 9M-3786 | [1] | SEAL-O-RING | |
| 6. | 0S-1590 | [4] | BOLT (3/8-16X2-IN) | |
| 7. | 212-8183 | [1] | IMPELLER (WATER PUMP) | |
| 8. | 9Y-8067 | [1] | ADAPTER | |
| 9. | 291-4309 | [1] | HOUSING AS | |
| 8T-6759 | [1] | PLUG-PIPE | ||
| 127-5400 | [1] | BUSHING | ||
| 10. | 8H-3128 | [4] | BOLT-SOCKET HEAD (1/4-20X0.625-IN) | |
| 11. | 423-0938 | [2] | WASHER-THRUST | |
| 12. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 13. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 14. | 7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 15. | 430-9695 | [1] | SHAFT |
#SEBP70430215
424-3625: PUMP GP-AUXILIARY WATER
424-3625 PUMP GP-AUXILIARY WATER
PART OF 334-8471 PUMP GP-AUXILIARY WATER
Type 2
PART OF 334-8471 PUMP GP-AUXILIARY WATER
Type 2
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS#SEBP70430216
540-4708: PUMP GP-AUXILIARY WATER
540-4708 PUMP GP-AUXILIARY WATER
PART OF 424-3625 PUMP GP-AUXILIARY WATER
PART OF 424-3625 PUMP GP-AUXILIARY WATER
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-1907 B | [1] | SEAL-O-RING | |
| 2. | 8H-3128 | [4] | BOLT-SOCKET HEAD (1/4-20X0.625-IN) | |
| 3. | 8T-6759 | [1] | PLUG-PIPE | |
| 4. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 5. | 9S-4191 B | [1] | PLUG (9/16-18-THD) | |
| 6. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 7. | 127-5400 | [1] | BUSHING | |
| 8. | 212-8183 | [1] | IMPELLER | |
| 9. | 9X-4594 | [1] | SEAL-LIP TYPE | |
| 10. | 349-2654 | [1] | SEAL-WATER PUMP | |
| 11. | 423-0938 | [2] | WASHER-THRUST | |
| 12. | 430-9695 | [1] | SHAFT | |
| B | USE AS REQUIRED | |||
#SEBP70430217
375-3658: PUMP GP-WATER
375-3658 PUMP GP-WATER
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 416-0610 CY | [1] | PUMP GP-WATER | |
| 2. | 8N-6423 | [1] | COVER (WATER INLET) | |
| 3. | 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | |
| 4. | 5H-6734 | [1] | SEAL-O-RING | |
| 5. | 149-5462 | [1] | SEAL-O-RING | |
| 6. | 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | |
| 7. | 9M-2151 | [3] | STUD-TAPERLOCK (3/8-16X1.378-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP70430218
416-0610: PUMP GP-WATER
416-0610 PUMP GP-WATER
PART OF 375-3658 PUMP GP-WATER
PART OF 375-3658 PUMP GP-WATER
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-4756 | [1] | HOUSING AS-PUMP | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 4N-5834 | [2] | FILTER-FOAM (WATER PUMP HOUSING) | ||
| 7G-8478 | [1] | ADAPTER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 2. | 7N-4758 | [1] | WASHER-THRUST | |
| 3. | 166-4374 | [1] | RING AS | |
| 1L-5316 | [1] | PIN-SPRING | ||
| 4. | 416-0603 | [1] | SEAL GP (WATER PUMP) | |
| 5. | 212-8180 | [1] | SHAFT AS-PUMP DRIVE | |
| 4B-9782 | [1] | BALL | ||
| 6. | 212-8184 | [1] | IMPELLER | |
| 7. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 8C-5236 | [1] | SEAL-LIP TYPE |
#SEBP70430219
382-2779: RADIATOR & MOUNTING GP
382-2779 RADIATOR & MOUNTING GP
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3512B PETROLEUM GEN SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-3117 | [2] | VALVE-BALL | |
| 2. | 7W-1506 | [1] | ELBOW | |
| 3. | 9Y-7645 | [2] | GUARD AS-FAN | |
| (EACH INCLUDES) | ||||
| 1F-0750 | [11] | NUT-WELD (3/8-16-THD) | ||
| 6N-8599 | [3] | CLIP | ||
| 4. | 120-9678 C | [2] | BRACKET | |
| 6. | 338-7181 | [2] | BRACKET AS | |
| 7. | 366-9470 | [2] | PLATE AS | |
| 8. | 370-5221 Y | [1] | RADIATOR GP | |
| 10. | 198-4781 | [18] | WASHER-HARD (22X40X10-MM THK) | |
| 11. | 225-7003 | [1] | SEAL-O-RING | |
| 12. | 267-3507 | [12] | WASHER-HARD (26X47X12-MM THK) | |
| 13. | 289-0272 | [6] | BOLT (3/4-10X5-IN) | |
| 14. | 3B-7749 | [2] | NIPPLE-PIPE | |
| 15. | 4L-6454 C | [26] | BOLT (3/8-16X1-IN) | |
| 16. | 4L-9337 C | [2] | BOLT (3/8-16X1.5-IN) | |
| 17. | 5P-1075 | [22] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 18. | 6V-1581 C | [2] | CLIP (SLOT) | |
| 19. | 6V-1582 C | [2] | CLIP (TAB) | |
| 20. | 6V-8182 | [12] | NUT (3/4-10-THD) | |
| 21. | 6V-8188 | [8] | NUT (1/2-13-THD) | |
| 22. | 6V-8801 C | [2] | NUT (3/8-16-THD) | |
| 23. | 299-3436 | [6] | BOLT (7/8-9X3.5-IN) | |
| 24. | 7X-0449 | [6] | NUT-FULL (7/8-9-THD) | |
| 25. | 7X-3391 | [1] | WASHER-HARD (13.5X32X6-MM THK) | |
| 26. | 8C-7323 | [2] | BOLT (3/8-16X6-IN) | |
| 27. | 8T-4835 C | [7] | BOLT (1/2-13X2-IN) | |
| 28. | 8T-4896 C | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 29. | 8T-4994 | [12] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 30. | 8T-8917 | [1] | BOLT (1/2-13X1.25-IN) | |
| 31. | 8T-8924 | [12] | BOLT (3/4-10X2.5-IN) | |
| 32. | 9B-7237 | [5] | BOLT (3/8-16X1.25-IN) | |
| 33. | 9Y-6893 | [2] | GASKET | |
| 34. | 4W-0530 C | [2] | RING-RETAINING | |
| 35. | 4W-0531 C | [4] | RETAINER | |
| 36. | 5P-2424 C | [1] | BOLT (1/2-13X2.25-IN) | |
| 37. | 8T-1919 C | [2] | SEAL-O-RING | |
| 38. | 8T-4223 C | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 39. | 126-5613 C | [2] | FLANGE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
COOLING SYSTEM
REGULATOR GP-TEMPERATURE
Operation and Maintenance Manual
Caterpillar Parts SIS Catalog 3512B :
Truck sale:
182,189
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
