468-0172 FILM GP S/N D8Z1-UP PART OF 503-8038 CONFIGURATION AR 980L WHEEL LOADER

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

0. 468-0172 FILM GP
1. 468-0173 FILM GP

GASKET & SEAL KITS

2. 514-8065 KIT-GASKET

LINES GP-DIAGNOSTIC

3. 364-7865 LINES GP-D

CHARTS & FILMS

4. 439-3515 PLATE & FI
5. 454-4493 PLATE & FI
6. 468-0559 PLATE & FI
7. 472-8685 PLATE & FI
8. 499-2519 PLATE & FI
9. 561-0639 PLATE & FI
0. INFORMATION

WHEEL LOADER 980L WHEEL LOADER D8Z
980L Wheel Loader D8Z00001-UP (MACHINE) POWERED BY C13 Engine SEBP7046 980L D8Z (2016)

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

439-3515 PLATE & FILM GP

454-4493 PLATE & FILM GP

#SEBP70461100

468-0172: FILM GP

FILM GP

468-0172 FILM GP
S/N D8Z1-UP
PART OF 503-8038 CONFIGURATION AR

i06803520 SEBP7046

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	468-0166	[2]	FILM-IDENTIFICATION (BLOCK HANDLER)

#SEBP70461101

468-0173: FILM GP

FILM GP

468-0173 FILM GP
S/N D8Z1-UP
FOR USE WITH FOREST MACHINE

i06520572 SEBP7046

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	468-0167	[2]	FILM-IDENTIFICATION (FOREST MACHINE)

#SEBP70461102

514-8065: KIT-GASKET

KIT-GASKET

514-8065 KIT-GASKET
S/N D8Z1-UP
CENTRAL AND LOWER STRUCTURE

i06741141 SEBP7046

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST
217-3674	[14]	FASTENER AS
209-7309	[3]	PLUG
217-3673	[1]	SEAL-ISOLATION
5P-8211	[1]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
061-9455	[2]	SEAL-O-RING
061-9458	[2]	SEAL-O-RING
131-3718	[1]	SEAL-O-RING
214-7566	[6]	SEAL-O-RING
214-7568	[2]	SEAL-O-RING
228-4947	[1]	SEAL-O-RING
228-7090	[1]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
238-5084	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP70461103

364-7865: LINES GP-DIAGNOSTIC

LINES GP-DIAGNOSTIC

364-7865 LINES GP-DIAGNOSTIC
S/N D8Z1-UP
PART OF 455-2191 CONFIGURATION AR

i06787013 SEBP7046

3647865 LINES GP-DIAGNOSTIC Parts scheme

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	197-4566	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
2.	204-1611	[5]	STRAP (DUAL)
3.	204-8000	[2]	MOUNTING-CABLE TIE
4.	389-4302	[1]	HOSE AS
5.	433-6019	[1]	HOSE AS
6.	433-6020	[1]	HOSE AS
7.	433-6025	[1]	BRACKET AS
	9C-4935	[1]	PLATE
8.	148-8368	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8627	[1]	ELBOW
9.	148-8413	[1]	REDUCER AS
	4J-5477	[1]	SEAL-O-RING
	6V-8934	[1]	ADAPTER
10.	148-8439	[1]	TEE AS
	6V-8774	[1]	TEE
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
11.	150-3033	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	8T-0164	[1]	ELBOW
12.	164-5567	[3]	COUPLER AS-QUICK DISCONNECT (MALE)
			(EACH INCLUDES)
	6V-3965	[1]	FITTING (QUICK DISCONNECT)
	214-7568	[1]	SEAL-O-RING
13.	169-5863	[3]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	7X-7945	[1]	ADAPTER (9/16-18-THD)
14.	204-2281	[2]	STRAP-CABLE
15.	2P-1279	[3]	LOCKNUT (9/16-18-THD)
16.	6V-0852	[3]	CAP-DUST
17.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
19.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
20.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP70461104

439-3515: PLATE & FILM GP

PLATE & FILM GP

439-3515 PLATE & FILM GP
S/N D8Z1-UP
PART OF 455-2185 CONFIGURATION AR

i06780251 SEBP7046

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
239-6986	[1]	PLATE-SERIAL NUMBER (MACHINE)
		(ALIGN LEFT EDGE OF PIN PLATE WITH LEFT EDGE OF PIN STAMPING ON NON ENGINE END FRAME & BOTTOM OF PIN PLATE 15-MM ABOVE TOP OF ORIGINAL PIN STAMPING)
3N-3790 A	[1]	PLATE-SERIAL NUMBER (ENGINE)
		(ON RH REAR FACE OF CYLINDER BLOCK)

9R-1499	[2]	REFLECTOR (RED)
		(CENTERED IN RECESSES PROVIDED ON COUNTERWEIGHT)

7X-3229	[4]	FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)
		(2-ON LEFT & RIGHT OUTBOARD SIDES OF U-PLATE ON FRONT FACE OF NON ENGINE END FRAME WITH OUTSIDE EDGE 10-MM FROM OUTBOARD SURFACE OF U-PLATE & TOP SURFACE 40-MM BELOW OUTERMOST TOP SURFACE FRONT PLATE)
		(2-VERTICALLY ON LEFT & RIGHT SIDES OF ENGINE END FRAME WITH FRONT EDGE 80-MM REARWARDS TO REAR FACE OF REAR LIFT TIEDOWN EYES & TOP SURFACE 120-MM BELOW TOP SURFACE OF REAR LIFT TIEDOWN EYES)
124-2456	[2]	FILM-INSTRUCTION (NO STEP)
		(TOP OF FILM PARALLEL TO RIB IN HOOD PANEL BUT OFFSET BY 10-MM FROM ROUND OF RIB; ALIGN EDGE OF FILM CLOSEST TO REAR OF MACHINE WITH CENTER OF AIR INLET HOLE)
146-6747	[2]	FILM-INFORMATION (24-VOLT)
		(1-ON OUTSIDE OF BATTERY BOX COVER BELOW FILM-WARNING ON LEFT SIDE OF MACHINE)
		(1-ON INSIDE OF DISCONNECT SWITCH COMPARTMENT BELOW JUMP START RECEPTACLE)
353-7106	[1]	FILM-IDENTIFICATION (GREASE POINTS)
		(ON OUTER RH NEEF RAIL 25-MM BACK FROM FRONT EDGE & 25-MM UP FROM BOTTOM EDGE)
397-5143	[1]	FILM-IDENTIFICATION (PORT)
		(ON INSIDE OF HYDRAULIC SERVICE CENTER DOOR, 10-MM DOWN FROM TOP & 36-MM AWAY FROM HINGED EDGE OF DOOR)
442-2367	[1]	FILM-IDENTIFICATION (BELT ROUTING)
		(ON RH RADIATOR SUPPORT 250-MM FROM TOP EDGE OF SUPPORT TO TOP EDGE OF FILM & 93-MM FROM RIGHT EDGE OF FILM TO RIGHT EDGE OF RADIATOR SUPPORT)
449-9226	[1]	FILM-INFORMATION (CAT SATO)
		(ON BATTERY BOX NEXT TO OIL FILL TUBE)
455-1084	[1]	FILM-IDENTIFICATION (CAT)
		(ON INSIDE OF ELECTRICAL DISCONNECT DOOR, CENTERED VERTICALLY & 15-MM AWAY FROM DOOR LATCH)
468-8049	[1]	FILM-INFORMATION (ENGINE OIL, READ OMM)
		(ON FAN MOTOR SUPPORT ASSEMBLY ON UPPER HORIZONTAL SUPPORT BAR 10-MM FROM EDGE)
506-9622	[1]	FILM-IDENTIFICATION (LUBRICATION POINTS)
		(FACING OUTWARDS ON OUTSIDE SURFACE OF RH VERTICAL PLATE OF NON ENGINE END FRAME WITH TOP OF FILM ALIGNED WITH BOTTOM OF UPPER HITCH PLATE & RIGHT SIDE OF FILM 30-MM AWAY FROM REAR SURFACE OF VERTICAL PLATE)
A		NOT PART OF THIS GROUP

#SEBP70461105

454-4493: PLATE & FILM GP

PLATE & FILM GP

454-4493 PLATE & FILM GP
S/N D8Z1-UP
PART OF 455-3940, 549-4085 CAB AR

i06600761 SEBP7046

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	201-2733	[1]	FILM-INFORMATION (INPUT/OUTPUT)
2.	299-7880	[1]	FILM-INSTRUCTION (NO STEP)
3.	345-0351	[1]	FILM-IDENTIFICATION (IGNITION SWITCH)
4.	448-2831	[1]	FILM-INSTRUCTION (AIR CONDITIONER, READ MAN)
5.	466-3275	[1]	FILM-WARNING (NO WELD, NO DRILL, READ OMM)
6.	236-7230	[1]	TAG-WARNING (STEERING FRAME LOCK)

#SEBP70461106

468-0559: PLATE & FILM GP

PLATE & FILM GP

468-0559 PLATE & FILM GP
S/N D8Z1-UP
PART OF 468-0568, 573-0895 DISTRIBUTION AR

i06801452 SEBP7046

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
346-5282	[2]	FILM-WARNING (CRUSH HAZARD, STAY BACK)
		(ON RH & LH SIDE OF LIFT ARM HALF WAY BETWEEN BUCKET & FRONT TIRE WITH LIFT ARM IN LOWERED POSITION)
519-8113	[1]	FILM-IDENTIFICATION (ROPS, FOPS, READ OMM)
		(ON FRONT LH ROPS POST BETWEEN FILM-A/C & FILM-WARNING NO WELD/NO DRILL)

#SEBP70461107

472-8685: PLATE & FILM GP

PLATE & FILM GP

472-8685 PLATE & FILM GP
S/N TXX1-UP
PART OF 415-6075 ENGINE AR, 416-2212 ENGINE AR-COMPLETE

i06250092 SEBP7046

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	293-9659	[2]	FILM-WARNING (UNIVERSAL, READ OMM)
2.	3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
3.	419-8867	[1]	PLATE-IDENTIFICATION (CAT)
4.	136-9066	[1]	FILM-INFORMATION (ENGINE OIL)

#SEBP70461108

499-2519: PLATE & FILM GP

PLATE & FILM GP

499-2519 PLATE & FILM GP
S/N D8Z1-UP
EUROPEAN MARKET
PART OF 456-5251 FILM GP

i06797059 SEBP7046

For full view, you need register

Parts for your 980L WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
224-0672	[1]	FILM-WARNING (HIGH PRESSURE, READ OMM, INTL)
		(ON RH OUTER FACE OF NON ENGINE FRAME, TOP EDGE 5-MM BELOW BOTTOM EDGE OF FILM-WARNING & LH EDGE ALIGNED WITH LH EDGE OF FILM-WARNING)
224-8946	[1]	FILM-WARNING (NO ETHER SPRAY/AIR INTK, INTL)
		(ON TOP HOOD PANEL 440-MM FROM FRONT EDGE, CENTERED WITH AIR CLEANER & OFFSET TO MACHINE LH SIDE BY 100-MM)
225-0312	[2]	FILM-WARNING (JUMP START, READ OMM, INTL)
		((1) ON LH SIDE OF MACHINE ON OUTSIDE OF BATTERY BOX COVER)
		((1) INSIDE DISCONNECT SWITCH COMPARTMENT ABOVE SWITCHES)
226-1240	[2]	FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL)
		(ON BOTH OUTER SIDE FACES OF NON ENGINE FRAME, BOTTOM EDGE 505-MM ABOVE CENTER HORIZONTAL CENTER LINE OF LIFT CYLINDER PIN & FRONT EDGE 285-MM FROM CENTER LINE OF LIFT CYLINDER PIN)
226-1274	[1]	FILM-WARNING (CRUSH HAZARD, READ OMM, INTL)
		(ON LH OUTER FACE OF NON ENGINE FRAME, BOTTOM EDGE 420-MM ABOVE CENTER HORIZONTAL CENTER LINE OF LIFT CYLINDER PIN & FRONT EDGE 285-MM FROM CENTER LINE OF LIFT CYLINDER PIN)
228-7316	[2]	FILM-WARNING (HOT SURFACE, HANDS CLEAR, INTL)
		((1)-ON LH HOOD PANEL 715-MM FROM REAR EDGE & 20-MM FROM BOTTOM EDGE)
		((1)-ON RH HOOD PANEL 715-MM FROM REAR EDGE & 20-MM FROM THE BOTTOM EDGE)
228-9106	[2]	FILM-WARNING (HOT SURFACE, HANDS CLEAR, INTL)
		((1)-ON FLAT SURFACE ON FRONT OF AIR CLEANER COVER AS FAR REARWARD AS POSSIBLE)
		((1)-ON LH RADIATOR SUPPORT 10-MM FROM FORWARD EDGE 526-MM FROM BOTTOM OF SUPPORT)
444-5639	[2]	FILM-WARNING (LEAK DETECTION, READ OMM)
		(ABOVE WINDOW CUTOUT ON OUTSIDE & INSIDE OF NEEF FRONT PLATE, PLACE 200-MM TO THE OPERATOR LH SIDE OF CENTER)
463-0968	[2]	FILM-WARNING (ROTATING FAN)
		((1)-FORWARD OF LH SIDE RADIATOR ACCESS DOOR 20-MM FROM SUPPORT EDGE & 620-MM FROM BOTTOM OF SUPPORT)
		((1)-FORWARD OF RH SIDE RADIATOR ACCESS DOOR 20-MM FROM SUPPORT EDGE & 620-MM FROM BOTTOM OF SUPPORT.