AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

500-3091 FILTER GP-FUEL 3054C INDUSTRIAL ENGINE


FUEL SYSTEM
FILTER GP-FUEL
PUMP GP-FUEL PRIMING
PUMP GP-FUEL INJECTION

INDUSTRIAL ENGINE 3054C INDUSTRIAL ENGINE 330
 3054C Industrial Engine 33000001-UP SEBP7107 3054C 330   (2010)

FUEL SYSTEM

FILTER GP-FUEL
FILTER GP-FUEL
441-5108 FILTER GP-FUEL
FILTER GP-FUEL
446-1895 FILTER GP-FUEL
FILTER GP-FUEL
500-3091 FILTER GP-FUEL
FILTER GP-WATER SEP & FUEL
252-6334 FILTER GP-WATER SEP & FUEL
PUMP GP-FUEL PRM & PRIM FILTER
233-7425 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
233-9417 PUMP GP-FUEL PRM & PRIM FILTER
 

#SEBP71070210
 

500-3091: FILTER GP-FUEL

500-3091 FILTER GP-FUEL
i07179472 SEBP7107
5003091 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 215-9508 [1] FITTING (QUICK DISCONNECT, FEMALE)  
2. 215-9509 [1] FITTING (QUICK DISCONNECT, MALE)  
3. 232-3126 [1] CLIP  
4. 232-9758 [3] WASHER (6.51X17.785X1.6-MM THK)  
5. 232-9759 [1] LINE AS-FUEL INJECTION (LOW PRESSURE FEED)  
6. 237-0284 [1] LINE AS-FUEL (LOW PRESSURE RETURN)  
7. 237-0285 [1] BRACKET  
8. 237-0286 [1] PLUG (BLANKING)  
9. 243-3811 [3] BOLT-FLANGE HEAD  
10. 311-6822 [1] CLIP-TUBE  
11. 446-1895 Y [1] FILTER GP-FUEL (24-VOLT, LONG BOWL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP71070211
 

252-6334: FILTER GP-WATER SEP & FUEL

252-6334 FILTER GP-WATER SEP & FUEL
PART OF 260-3128 FILTER & LINES GP-FUEL
i05172313 SEBP7107
2526334 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 441-5111 [1] FILTER AS-FUEL (FUEL FILTER, WATER SEPARATOR)  
 

#SEBP71070212
 

467-7011: KIT-FUEL PRIMING PUMP

467-7011 KIT-FUEL PRIMING PUMP
PART OF 233-7425, 233-9417 PUMP GP-FUEL PRM & PRIM FILTER
i06280743 SEBP7107
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  386-0189 Y [1] FILTER AS-FUEL (12V)  
  434-2751 Y [1] HARNESS AS-PUMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP71070213
 

232-1827: PUMP GP-FUEL INJECTION

232-1827 PUMP GP-FUEL INJECTION
Type 1
i05885002 SEBP7107
2321827 PUMP GP-FUEL INJECTION Parts scheme 2321827 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 111-3422 M [1] NUT (M14X1.5-THD)  
9. 111-3423 [1] WASHER  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 140-8714 [1] CLIP  
12. 169-5326 [1] SWITCH-TEMPERATURE (ENGINE COOLANT)  
13. 199-9252 [1] SEAL-O-RING  
14. 199-9751 [2] SEAL-O-RING  
15. 205-7644 [3] WASHER  
16. 232-3157 [1] BRACKET  
17. 236-2144 [1] TUBE AS  
17A. 067-6999 [1] FERRULE  
18. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
19. 230-8995 [1] TUBE AS (CYL NO. 1)  
20. 230-8996 [1] TUBE AS (CYL NO. 2)  
21. 230-8997 [1] TUBE AS (CYL NO. 3)  
22. 230-8998 [1] TUBE AS (CYL NO. 4)  
23. 230-8999 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
23A. 140-8718 [1] WASHER  
23B. 232-2724 [1] NOZZLE  
23C. 275-1038 [1] SEAL-O-RING  
24. 284-4990 C [1] PUMP GP-FUEL INJECTION  
25. 238-8671 [4] CLAMP-INJECTOR  
26. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
27. 240-5571 [1] BRACKET  
29. 232-3126 [1] CLIP  
30. 232-1295 [1] PLUG  
31. 232-1322 [2] PLUG  
33. 232-1328 [1] CAP  
34. 232-1793 [1] CABLE  
35. 232-1794 [3] HOSE  
36. 232-2725 [2] CLIP  
37. 232-2726 [1] CLIP  
39. 318-2365 [1] CLIP  
   
  232-3263 F [3] CLIP-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP71070214
 

232-1827: PUMP GP-FUEL INJECTION

232-1827 PUMP GP-FUEL INJECTION
Type 2
i07223846 SEBP7107
2321827 PUMP GP-FUEL INJECTION Parts scheme 2321827 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 178-3336 M [1] NUT-HEX FLANGE (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 140-8714 [1] CLIP  
10. 169-5326 [1] SWITCH-TEMPERATURE (ENGINE COOLANT)  
11. 199-9252 [1] SEAL-O-RING  
12. 199-9751 [2] SEAL-O-RING  
13. 205-7644 [3] WASHER (SEALING)  
14. 232-3157 [1] BRACKET  
15. 236-2144 [1] TUBE AS  
15A. 067-6999 [1] FERRULE  
16. 425-7107 [1] GEAR-FUEL PUMP (68-TEETH)  
17. 230-8995 [1] TUBE AS (CYL NO. 1)  
18. 230-8996 [1] TUBE AS (CYL NO. 2)  
19. 230-8997 [1] TUBE AS (CYL NO. 3)  
20. 230-8998 [1] TUBE AS (CYL NO. 4)  
21. 230-8999 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
21A. 140-8718 [1] WASHER  
21B. 232-2724 [1] NOZZLE  
21C. 275-1038 [1] SEAL-O-RING  
22. 483-2353 C [1] PUMP AS-FUEL INJECTION  
22A. 111-3422 M [1] NUT (M14X1.5-THD)  
22B. 111-3423 [1] WASHER  
22C. 152-3968 [1] SEAL-O-RING  
22D. 176-6219 [1] SOLENOID (12-VOLT)  
23. 238-8671 [4] CLAMP-INJECTOR  
24. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
25. 240-5571 [1] BRACKET  
26. 232-3126 [1] CLIP  
27. 232-1295 [1] PLUG (BLANKING)  
28. 232-1322 [2] PLUG (BLANKING)  
29. 232-1328 [1] CAP (FUEL INJECTOR)  
30. 232-1793 [1] CABLE  
31. 232-1794 [3] HOSE  
32. 232-2725 [2] CLIP  
33. 232-2726 [1] CLIP  
34. 318-2365 [1] CLIP  
   
  232-3263 F [3] CLIP-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP71070215
 

233-7974: PUMP GP-FUEL INJECTION

233-7974 PUMP GP-FUEL INJECTION
i05182211 SEBP7107
2337974 PUMP GP-FUEL INJECTION Parts scheme 2337974 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
5. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
6. 140-8714 [1] CLIP  
7. 332-7549 [1] SEAL-O-RING  
8. 155-8804 [1] CAP  
9. 169-5326 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
10. 232-1328 [1] CAP (FUEL INJECTOR)  
11. 232-1794 [3] HOSE (LEAK OFF)  
12. 240-5571 [1] BRACKET  
17. 232-2720 [1] TUBE AS (CYL NO. 1)(CYL NO. 1)  
18. 232-2721 [1] TUBE AS (CYL NO. 2)(CYL NO. 2)  
19. 232-2722 [1] TUBE AS (CYL NO. 3)(CYL NO. 3)  
20. 232-2723 [1] TUBE AS (CYL NO. 4)(CYL NO. 4)  
21. 232-2725 [2] CLIP  
22. 232-2726 [1] CLIP  
23. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
24. 232-3157 [1] BRACKET  
25. 238-8671 [4] CLAMP-INJECTOR  
27. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
28. 266-3715 BJY [1] PUMP GP-FUEL INJECTION  
    -OR-
  266-3716 BLY [1] PUMP GP-FUEL INJECTION  
    -OR-
  266-3718 BNY [1] PUMP GP-FUEL INJECTION  
29. 233-7104 [1] GEAR-PUMP  
30. 232-1793 [1] CABLE  
31. 266-6830 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
31A. 140-8718 [1] WASHER  
31B. 234-0387 [1] NOZZLE  
31C. 275-1038 [1] SEAL-O-RING  
32. 232-1115 [1] CLIP-PIPE  
   
  266-2994 F [1] KIT-INJECTOR (FUEL)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   PUMP MARKED J IS FOR 2,200 RPM ENGINES ONLY
  L   PUMP MARKED L IS FOR 2,300 RPM ENGINES ONLY
  M   METRIC PART
  N   PUMP MARKED N IS FOR 2,400 RPM ENGINES ONLY
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP71070216
 

233-9526: PUMP GP-FUEL INJECTION

233-9526 PUMP GP-FUEL INJECTION
i05989653 SEBP7107
2339526 PUMP GP-FUEL INJECTION Parts scheme 2339526 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 178-3336 M [1] NUT-HEX FLANGE (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 111-3422 M [1] NUT (M14X1.5-THD)  
9. 111-3423 [1] WASHER  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 140-8714 [1] CLIP  
12. 169-5326 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
13. 199-9252 [1] SEAL-O-RING  
14. 199-9751 [2] SEAL-O-RING  
15. 236-2144 [1] TUBE AS  
16. 425-7107 [1] GEAR-FUEL PUMP (68-TEETH)  
17. 230-8995 [1] TUBE AS (CYL NO. 1)  
18. 230-8996 [1] TUBE AS (CYL NO. 2)  
19. 230-8997 [1] TUBE AS (CYL NO. 3)  
20. 230-8998 [1] TUBE AS (CYL NO. 4)  
21. 230-8999 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
21A. 140-8718 [1] WASHER  
21B. 232-2724 [1] NOZZLE  
21C. 275-1038 [1] SEAL-O-RING  
22. 240-5571 [1] BRACKET  
25. 232-1295 [1] PLUG  
26. 232-1322 [2] PLUG  
28. 232-1328 [1] CAP  
29. 232-1793 [1] CABLE  
30. 232-1794 [3] HOSE  
31. 232-2725 [2] CLIP  
32. 232-2726 [1] CLIP  
33. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
34. 232-3157 [1] BRACKET  
35. 238-8671 [4] CLAMP-INJECTOR  
36. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
37. 483-2328 CY [1] PUMP GP-FUEL INJECTION  
38. 318-2365 [1] CLIP  
   
  232-3263 F [3] CLIP-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP71070217
 

236-8228: PUMP GP-FUEL INJECTION

236-8228 PUMP GP-FUEL INJECTION
PART OF 236-8229 PUMP GP-FUEL INJECTION
FIELD REPLACEMENT ORDER @@@@@248-2356@@@@@
i05179510 SEBP7107
2368228 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-3968 [1] SEAL-O-RING  
2. 176-6219 [1] SOLENOID (12-VOLT)(FUEL SHUTOFF)  
 

#SEBP71070218
 

236-8229: PUMP GP-FUEL INJECTION

236-8229 PUMP GP-FUEL INJECTION
i05179463 SEBP7107
2368229 PUMP GP-FUEL INJECTION Parts scheme 2368229 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 111-3422 M [1] NUT (M14X1.5-THD)  
9. 111-3423 [1] WASHER  
10. 140-8714 [1] CLIP  
11. 230-7886 [1] TUBE AS  
11A. 067-6999 [1] FERRULE  
11B. 106-8835 [1] NUT  
12. 425-7107 [1] GEAR-FUEL PUMP (68-TEETH)  
13. 230-8995 [1] TUBE AS (CYL NO. 1)  
14. 230-8996 [1] TUBE AS (CYL NO. 2)  
15. 230-8997 [1] TUBE AS (CYL NO. 3)  
16. 230-8998 [1] TUBE AS (CYL NO. 4)  
18. 232-1328 [1] CAP  
19. 232-1794 [3] HOSE  
20. 232-2725 [2] CLIP  
21. 232-2726 [1] CLIP  
22. 232-3149 [1] WASHER (8.35X16.85X1.55-MM THK)(SEALING)  
23. 232-3157 [1] BRACKET  
24. 238-8671 [4] CLAMP-INJECTOR  
25. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
26. 235-1790 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
27. 236-1674 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
27A. 236-1673 [1] NOZZLE  
27B. 140-8718 [1] WASHER  
27C. 275-1038 [1] SEAL-O-RING  
28. 236-8228 Y [1] PUMP GP-FUEL INJECTION  
29. 318-2365 [1] CLIP  
30. 240-5571 [1] BRACKET  
31. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP71070219
 

248-2356: PUMP GP-FUEL INJECTION

248-2356 PUMP GP-FUEL INJECTION
FIELD REPLACEMENT FOR @@@@@236-8228@@@@@
FOR USE WITH 2200 RPM RATED ENGINES
i06284873 SEBP7107
2482356 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-6219 [1] SOLENOID (12-VOLT)(FUEL SHUTOFF)  
2. 152-3968 [1] SEAL-O-RING  
 

Information:

Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Secondary Filter - Replace
3054C Industrial Engine
Fuel System Primary Filter (Water Separator) Element - Replace
3054C Industrial Engine
Fuel System Primary Filter/Water Separator - Drain
3054C Industrial Engine
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Priming Pump and Fuel Filter Base - Remove and Install
3054C Industrial Engine

Caterpillar Parts SIS Catalog 3054C :

FILTER GP-FUEL
446-1895 FILTER GP-FUEL
FILTER GP-FUEL
441-5108 FILTER GP-FUEL
FILTER GP-FUEL
276-1804 FILTER GP-FUEL
FILTER AS-FUEL
386-0189 FILTER AS-FUEL
FILTER AS-FUEL
350-5171 FILTER AS-FUEL
FILTER & LINES GP-FUEL
458-6160 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
458-6160 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
260-3128 FILTER & LINES GP-FUEL
FILTER GP-WATER SEP & FUEL
252-6334 FILTER GP-WATER SEP & FUEL
467-7011 KIT-FUEL PRIMING PUMP
PUMP GP-FUEL INJECTION
232-1827 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
232-1827 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
233-7974 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
233-9526 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-8228 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-8229 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar 3054C, Construction
15,000 USD 
Caterpillar 3054C, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.