180-3191 ENGINE AR S/N 3PD1-UP FIELD INSTALLATION 966G II WHEEL LOADER

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
200-5026 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
170-6487 Y	[1]	COVER GP-CYLINDER BLOCK
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
169-4188 Y	[1]	CRANKSHAFT GP
226-4913 Y	[1]	CYLINDER BLOCK GP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
185-5803 Y	[1]	FLYWHEEL GP
185-5873 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
117-2750 Y	[1]	GEAR GP-FRONT
194-8211 Y	[1]	HOUSING & REGULATOR GP
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
185-7252 Y	[1]	MOUNTING GP-ALTERNATOR
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
132-3203 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
190-6017 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
191-2925 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR
201-5168	[1]	ELECTRONICS GP-ENGINE RATINGS

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
415-8631 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
417-9508 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1440 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1461 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP71080002

220-0794: ENGINE AR

ENGINE AR

220-0794 ENGINE AR
S/N 3PD1-UP
FIELD INSTALLATION

i05242036 SEBP7108

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
200-5026 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
170-6487 Y	[1]	COVER GP-CYLINDER BLOCK
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
169-4188 Y	[1]	CRANKSHAFT GP
226-4913 Y	[1]	CYLINDER BLOCK GP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
185-5803 Y	[1]	FLYWHEEL GP
185-5873 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
117-2750 Y	[1]	GEAR GP-FRONT
216-8361 Y	[1]	HOUSING & REGULATOR GP
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
185-7252 Y	[1]	MOUNTING GP-ALTERNATOR
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
132-3203 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
190-6017 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
191-2925 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR
201-5168	[1]	ELECTRONICS GP-ENGINE RATINGS

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
415-8631 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
417-9508 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1440 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1461 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP71080003

223-1553: ENGINE AR

ENGINE AR

223-1553 ENGINE AR
S/N 3PD1-UP
FIELD INSTALLATION

i05241956 SEBP7108

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
236-0963 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
228-2769 Y	[1]	COVER GP-CYLINDER BLOCK
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
169-4188 Y	[1]	CRANKSHAFT GP
226-4913 Y	[1]	CYLINDER BLOCK GP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
185-5803 Y	[1]	FLYWHEEL GP
236-5035 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
117-2750 Y	[1]	GEAR GP-FRONT
236-4891 Y	[1]	HOUSING & REGULATOR GP
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
138-2550 Y	[1]	MOUNTING GP-FAN DRIVE
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
132-3203 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
190-6017 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
277-7764 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR
201-5168	[1]	ELECTRONICS GP-ENGINE RATINGS

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
415-8631 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
417-9508 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1440 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1461 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP71080004

223-1556: ENGINE AR

ENGINE AR

223-1556 ENGINE AR
S/N 3PD1-UP
FIELD INSTALLATION

i05242007 SEBP7108

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
236-0963 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
228-2769 Y	[1]	COVER GP-CYLINDER BLOCK
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
169-4188 Y	[1]	CRANKSHAFT GP
226-4913 Y	[1]	CYLINDER BLOCK GP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
185-5803 Y	[1]	FLYWHEEL GP
236-5035 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
117-2750 Y	[1]	GEAR GP-FRONT
236-4891 Y	[1]	HOUSING & REGULATOR GP
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
138-2550 Y	[1]	MOUNTING GP-FAN DRIVE
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
132-3203 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
190-6017 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
277-7764 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR
201-5168	[1]	ELECTRONICS GP-ENGINE RATINGS

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
415-8631 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
417-9508 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1440 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1461 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP71080005

171-3062: CAMSHAFT GP

CAMSHAFT GP

171-3062 CAMSHAFT GP
S/N 3PD1-UP

i05241011 SEBP7108

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5217 M	[5]	BOLT (M8X1.25X20-MM)
2.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
3.	178-3643	[1]	PIN-THRUST
4.	133-7068	[1]	GASKET-CAMSHAFT COVER
5.	171-3063	[1]	CAMSHAFT AS
5A.	1B-8705	[1]	KEY-WOODRUFF
5B.	133-7100	[1]	GEAR-CAMSHAFT DRIVE (96-TEETH)
6.	4K-9841	[1]	WASHER (0.406X0.75X0.064-IN THK)
7.	118-0459	[1]	COVER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP71080006

170-6487: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

170-6487 COVER GP-CYLINDER BLOCK
S/N 3PD1-UP

i05241026 SEBP7108

1706487 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-1445	[3]	COVER
2.	061-9455	[3]	SEAL-O-RING
3.	1H-7339	[1]	SEAL-O-RING
4.	4P-1650	[1]	COVER
5.	4P-6587	[1]	COVER
6.	5S-9134	[1]	SEAL-O-RING
7.	6V-1250	[1]	SEAL-O-RING
8.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
9.	6V-5217 M	[6]	BOLT (M8X1.25X20-MM)
10.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
11.	7C-9542	[1]	COVER-FILTER BASE
12.	9M-1974	[8]	WASHER-HARD (8.8X16X2-MM THK)
13.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART

#SEBP71080007

228-2769: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

228-2769 COVER GP-CYLINDER BLOCK
S/N 3PD1-UP

i05241964 SEBP7108

2282769 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-4039	[1]	CAP
2.	7C-1445	[2]	COVER
3.	7C-9542	[1]	COVER-FILTER BASE
4.	9X-2097 M	[2]	STUD (M8X1.25-THD)
5.	061-9455	[2]	SEAL-O-RING
6.	107-5769	[1]	SEAL-O-RING
7.	133-9116	[1]	COVER
8.	4P-6587	[1]	COVER
9.	5P-7970 M	[1]	NUT (M8X1.25-THD)
10.	5S-9134	[1]	SEAL-O-RING
11.	6V-1250	[1]	SEAL-O-RING
12.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
13.	6V-5217 M	[4]	BOLT (M8X1.25X20-MM)
14.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
15.	9M-1974	[8]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP71080008

209-6669: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

209-6669 COVER GP-FRONT HOUSING
S/N 3PD1-UP

i05241032 SEBP7108

2096669 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	129-2181	[1]	SEAL-INTEGRAL
2.	142-2614	[1]	COVER
3.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	6V-8197 M	[1]	BOLT (M12X1.75X40-MM)
	M		METRIC PART

#SEBP71080009

169-4188: CRANKSHAFT GP

CRANKSHAFT GP

169-4188 CRANKSHAFT GP
S/N 3PD1-UP

i05241037 SEBP7108

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	211-0588 J	[3]	BEARING-MAIN
	128-0382 AB		BEARING-MAIN (0.51-MM US)
	128-0383 AB		BEARING-MAIN (0.76-MM US)
	128-0384 AB		BEARING-MAIN (0.51-MM OS)
	128-0385 AB		BEARING-MAIN (0.51-MM OS, 0.51-MM US)
2.	246-3144 J	[2]	PLATE-THRUST
3.	211-0587 J	[4]	BEARING-MAIN
	128-0400 AB		BEARING-MAIN (0.51-MM US)
	128-0401 AB		BEARING-MAIN (0.76-MM US)
	128-0402 AB		BEARING-MAIN (0.51-MM OS)
	128-0403 AB		BEARING-MAIN (0.51-MM OS, 0.51-MM US)
4.	326-4278	[1]	CRANKSHAFT AS
4A.	6V-3536	[1]	DOWEL
4B.	187-8972	[1]	GEAR-CRANKSHAFT (48-TEETH)
4C.	9Y-0821	[1]	SLEEVE (FRONT)
4D.	9Y-0810	[1]	SLEEVE-WEAR (REAR)

			AVAILABLE REPAIR KIT(S):
	196-9521 J		BEARING GP-MAIN (CRANKSHAFT)
			(INCLUDES STANDARD MAIN BEARINGS & THRUST PLATES)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

Engine Design
3176C and 3196 Engines for Caterpillar Built Machines

General Information
3176C and 3196 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Contamination Control Guidelines

Troubleshooting

Engine Will Not Crank
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Low Engine Oil Pressure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Stalls at Low RPM
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Excessive White Smoke
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Excessive Black Smoke
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Excessive White Smoke
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Low Power/Poor or No Response to Throttle
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Poor Acceleration or Response
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Overspeeds on Start-up
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Cranks but Will Not Start
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Poor Acceleration or Response
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

E190 Engine Overspeed Warning
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Low Power/Poor or No Response to Throttle
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Diagnostic Codes
3176C and 3196 Engines for Caterpillar Built Machines

Engine Cranks but Will Not Start
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

E190 Engine Overspeed Warning
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Low Power/Poor or No Response to Throttle
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Vibration
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Excessive Fuel Consumption
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Misfires, Runs Rough or Is Unstable
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Will Not Crank
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18