117-2794 FASTENER GP-FLYWHEEL S/N 4ZF1-UP; 7AZ1-UP 330C EXCAVATOR

BASIC ENGINE

FLYWHEEL GP

0. 117-2794 FASTENER G

HOUSING GP-FRONT

1. 116-4556 FASTENER G

FLYWHEEL GP

2. 116-5386 FLYWHEEL G

GEAR GP

3. 205-1321 GEAR GP-FR

HOUSING GP-FLYWHEEL

4. 187-0473 HOUSING GP

GEAR GP

5. 165-4446 HOUSING GP

ENGINE GP

6. 428-9317 KIT-ENGINE
7. 430-7210 KIT-ENGINE

SERVICE EQUIPMENT AND SUPPLIES

KIT-REBUILD

8. 20R-1465 KIT-ENGINE
9. 20R-1478 KIT-ENGINE
0. INFORMATION

EXCAVATOR 330C EXCAVATOR BTM
C-9 Engine Rebuild Kit & Related Parts for 330C Excavator BTM00001-UP (MACHINE) SEBP7110 330C BTM (2001)

BASIC ENGINE

FLYWHEEL GP

117-2794 FASTENER GP-FLYWHEEL

116-5386 FLYWHEEL GP

#SEBP71100030

117-2794: FASTENER GP-FLYWHEEL

FASTENER GP-FLYWHEEL

117-2794 FASTENER GP-FLYWHEEL
S/N 4ZF1-UP; 7AZ1-UP

i01065781 SEBP7110

1172794 FASTENER GP-FLYWHEEL Parts scheme

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8247	[8]	WASHER-HARD (17X32X3.5-MM THK)
2.	9X-2021 M	[8]	BOLT-LOCKING (M16X2X45-MM)
	M		METRIC PART

#SEBP71100031

116-4556: FASTENER GP-FRONT HOUSING

FASTENER GP-FRONT HOUSING

116-4556 FASTENER GP-FRONT HOUSING
S/N 4ZF1-UP; 7AZ1-UP

i01516753 SEBP7110

1164556 FASTENER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8336 M	[6]	BOLT (M12X1.75X70-MM)
	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART

#SEBP71100032

116-5386: FLYWHEEL GP

FLYWHEEL GP

116-5386 FLYWHEEL GP
S/N 4ZF1-UP; 7AZ1-UP

i04544683 SEBP7110

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	256-9661 C	[1]	FLYWHEEL AS
2.	256-9651	[1]	GEAR-FLYWHEEL (113-TEETH)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP71100033

205-1321: GEAR GP-FRONT

GEAR GP-FRONT

205-1321 GEAR GP-FRONT
S/N 4ZF1-UP; 7AZ1-UP

i01773939 SEBP7110

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	113-6069	[1]	PLATE-THRUST
2.	115-4219	[1]	PLATE-RETAINING
3.	200-4495	[1]	SHAFT-IDLER
4.	205-1320	[1]	GEAR AS-IDLER (50-TEETH)
4A.	115-4072	[1]	BEARING
5.	136-4183 M	[1]	BOLT-12 POINT HEAD (M10X1.5X30-MM)
6.	6V-5843 M	[2]	BOLT (M10X1.5X45-MM)
	M		METRIC PART

#SEBP71100034

187-0473: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

187-0473 HOUSING GP-FLYWHEEL
S/N 4ZF1-UP; 7AZ1-UP

i01981370 SEBP7110

1870473 HOUSING GP-FLYWHEEL Parts scheme

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-8422 B		SEALANT
2.	7C-1445	[1]	COVER
3.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
4.	419-5522 C	[1]	HOUSING-FLYWHEEL
5.	061-9455	[1]	SEAL-O-RING
6.	132-5789 C	[1]	CLIP (LADDER)
7.	389-3728	[2]	PLUG AS
			(EACH INCLUDES)
	238-5084	[1]	SEAL-O-RING
	360-3684	[1]	PLUG
8.	371-7186	[1]	PLUG AS
	360-3678	[1]	PLUG-O-RING
	214-7567	[1]	SEAL-O-RING
9.	5P-8245 C	[14]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
11.	6V-8197 CM	[14]	BOLT (M12X1.75X40-MM)
12.	398-5596	[2]	PLUG AS
			(EACH INCLUDES)
	360-3680	[1]	PLUG
	238-5080	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP71100035

165-4446: HOUSING GP-FRONT

HOUSING GP-FRONT

165-4446 HOUSING GP-FRONT
S/N 4ZF1-UP; 7AZ1-UP

i01999688 SEBP7110

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	245-3259	[1]	HOUSING-FRONT
2.	6V-3918 M	[4]	BOLT (M8X1.25X50-MM)
3.	6V-5217 M	[8]	BOLT (M8X1.25X20-MM)
4.	9M-1974	[12]	WASHER-HARD (8.8X16X2-MM THK)
5.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP71100036

428-9317: KIT-ENGINE GASKET

KIT-ENGINE GASKET

428-9317 KIT-ENGINE GASKET
CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP & ATTACHING LINES
PART OF 430-3914 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@187-0470@@@@@, @@@@@208-3027@@@@@, @@@@@234-2917@@@@@, @@@@@237-0283@@@@@, REHS7938, REHS7939 & REHS7940

i05277946 SEBP7110

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6V-6609	[4]	SEAL-O-RING
147-0182	[1]	SEAL-O-RING
384-9992	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

#SEBP71100037

430-7210: KIT-ENGINE GASKET

KIT-ENGINE GASKET

430-7210 KIT-ENGINE GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
PART OF 430-3914 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@187-0470@@@@@, @@@@@208-3027@@@@@, @@@@@234-2917@@@@@, @@@@@237-0283@@@@@, REHS7940, C-9 MACHINE ENGINE

i05278201 SEBP7110

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
157-0670	[1]	CAP-DUST
1P-0451	[1]	GASKET (TURBOCHARGER)
161-3411	[6]	GASKET
191-4457	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
219-2340	[1]	GASKET
187-1315	[1]	GASKET AS (CYLINDER HEAD)
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
3S-9643	[1]	SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)
238-5081	[1]	SEAL-O-RING
4G-4972	[1]	SEAL-O-RING
6V-6609	[8]	SEAL-O-RING
7F-8268	[1]	SEAL-O-RING
214-7566	[2]	SEAL-O-RING
214-7567	[2]	SEAL-O-RING
214-7568	[15]	SEAL-O-RING
228-7089	[2]	SEAL-O-RING
228-7090	[2]	SEAL-O-RING
228-7096	[2]	SEAL-O-RING
238-5080	[4]	SEAL-O-RING
268-3490	[1]	SEAL-VALVE COVER
285-4106	[1]	SEAL-VALVE COVER
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP71100038

20R-1465: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1465 KIT-ENGINE OVERHAUL
S/N 4ZF1-UP; 7AZ1-UP
(GOLD OVERHAUL KIT) C-9 MACHINE ENGINE
FOR USE WITH @@@@@237-0283@@@@@, @@@@@234-2917@@@@@, @@@@@208-3027@@@@@, @@@@@187-0470@@@@@

i05325754 SEBP7110

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
430-3914 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

10R-8155	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
7X-2908	[2]	RING-RETAINING
10R-2037	[1]	ROD AS-CONNECTING
160-8194	[1]	BEARING
160-8197 M	[2]	BOLT (M12X1.25X62-MM)
166-3648	[1]	PIN-PISTON
	[1]	RING-PISTON (INTERMEDIATE)
167-0024	[1]	SEAL-LINER
168-7209	[1]	RING-PISTON (OIL CONTROL)
197-9297	[1]	CROWN AS-PISTON
197-9299	[1]	RING-PISTON (TOP)
385-7276	[1]	LINER-CYLINDER BLOCK

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP71100039

20R-1478: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1478 KIT-ENGINE OVERHAUL
S/N 4ZF1-UP; 7AZ1-UP
(PLATINUM OVERHAUL KIT) C-9 MACHINE ENGINE
FOR USE WITH @@@@@237-0283@@@@@, @@@@@234-2917@@@@@, @@@@@208-3027@@@@@, @@@@@187-0470@@@@@

i05325807 SEBP7110

For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
430-3914 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

10R-7022	[1]	CYLINDER HEAD GP
211-2134	[24]	RETAINER
187-4123	[12]	VALVE-INLET
188-3122	[12]	VALVE-EXHAUST
	[1]	CYLINDER HEAD AS
260-4856	[24]	GUIDE-VALVE (STANDARD, EXHAUST)
203-3237 AB		GUIDE-VALVE (0.13-MM OS, EXHAUST)
203-3238 AB		GUIDE-VALVE (0.5-MM OS, EXHAUST)
271-7442	[2]	PLUG
310-7255	[6]	SEAL-O-RING
310-7257	[6]	SEAL-O-RING
321-8635	[5]	PLUG
176-7688	[12]	SEAT-VALVE (STANDARD, INLET)
317-7201 AB		SEAT-VALVE (0.127-MM OS)
317-7202 AB		SEAT-VALVE (0.25-MM OS)
317-7203 AB		SEAT-VALVE (0.508-MM OS)
176-7690	[12]	SEAT-VALVE (STANDARD, EXHAUST)
317-7204 AB		SEAT-VALVE (0.127-MM OS)
317-7205 AB		SEAT-VALVE (0.25-MM OS)
317-7206 AB		SEAT-VALVE (0.508-MM OS)
214-7568	[5]	SEAL-O-RING
228-7096	[2]	SEAL-O-RING
229-1490	[6]	SLEEVE-INJECTOR
6V-7604	[6]	PLUG-CUP
8M-5860	[18]	PLUG-CUP
8T-6764	[2]	PLUG-PIPE (1/8-27-THD)
9S-8005	[2]	PLUG (3/4-16-THD)
112-5282	[2]	SEAL-O-RING
2A-4429	[48]	LOCK-RETAINER
163-2478	[24]	SEAL-VALVE STEM
183-7889	[12]	SEAT-VALVE SPRING
190-6115	[24]	SPRING-VALVE (INNER)
190-6117	[24]	SPRING-VALVE (OUTER)

10R-7224	[6]	INJECTOR GP-FUEL
		(EACH INCLUDES)
109-3207	[1]	SEAL-O-RING
148-2903	[1]	SEAL-O-RING
149-5240	[1]	RING-BACKUP
169-3104	[1]	RING-BACKUP
169-8586	[1]	RING-BACKUP
169-8598	[1]	SEAL-O-RING

10R-8155	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
7X-2908	[2]	RING-RETAINING
10R-2037	[1]	ROD AS-CONNECTING
160-8194	[1]	BEARING
160-8197 M	[2]	BOLT (M12X1.25X62-MM)
166-3648	[1]	PIN-PISTON
	[1]	RING-PISTON (INTERMEDIATE)
167-0024	[1]	SEAL-LINER
168-7209	[1]	RING-PISTON (OIL CONTROL)
197-9297	[1]	CROWN AS-PISTON
197-9299	[1]	RING-PISTON (TOP)
385-7276	[1]	LINER-CYLINDER BLOCK

10R-1984	[1]	PUMP AS-ENGINE OIL

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION