AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

430-3914 KIT-ENGINE OVERHAUL (BRONZE OVERHAUL KIT) PART OF 20R-1465, 20R-1478, 430-8168 KIT-ENGINE OVERHAUL FOR USE WITH @@@@@187-0470@@@@@, @@@@@208-3027@@@@@, @@@@@234-2917@@@@@, @@@@@237-0283@@@@@, REHS7940, C-9 MACHINE ENGINE FIELD INSTALLATION 330C


SERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILD
BASIC ENGINE
HOUSING GP-FRONT
LIFTING GP-ENGINE
PAN GP-OIL
PISTON & ROD GP
CYLINDER BLOCK GP
PULLEY GP

EXCAVATOR 330C EXCAVATOR BTM
 C-9 Engine Rebuild Kit & Related Parts for 330C Excavator BTM00001-UP (MACHINE) SEBP7110 330C BTM   (2001)

SERVICE EQUIPMENT AND SUPPLIES

KIT-REBUILD
428-9317 KIT-ENGINE GASKET
430-7210 KIT-ENGINE GASKET
20R-1465 KIT-ENGINE OVERHAUL
20R-1478 KIT-ENGINE OVERHAUL
430-3914 KIT-ENGINE OVERHAUL
430-8168 KIT-ENGINE OVERHAUL
430-4352 KIT-FRONT COVER GASKET
 

#SEBP71100040
 

430-3914: KIT-ENGINE OVERHAUL

430-3914 KIT-ENGINE OVERHAUL
(BRONZE OVERHAUL KIT)
PART OF 20R-1465, 20R-1478, 430-8168 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@187-0470@@@@@, @@@@@208-3027@@@@@, @@@@@234-2917@@@@@, @@@@@237-0283@@@@@, REHS7940, C-9 MACHINE ENGINE
FIELD INSTALLATION
i05281319 SEBP7110
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  428-9317 Y [1] KIT-ENGINE GASKET (WATER PUMP)  
  430-7210 Y [1] KIT-ENGINE GASKET (SINGLE CYLINDER HEAD)  
  430-4352 Y [1] KIT-FRONT COVER GASKET  
  305-0793 Y [6] KIT-GASKET (SINGLE FUEL INJECTOR)  
  425-6640 Y [1] KIT-GASKET (CENTRAL AND LOWER STRUCTURE)  
  424-1361 Y [1] KIT-GASKET (OIL COOLER, LINES)  
  424-1264 Y [1] KIT-GASKET (REAR STRUCTURE)  
   
  115-4072 [1] BEARING  
  213-3190 [6] BEARING  
  282-2478 AB BEARING-CONNECTING ROD (0.25-MM US)  
  282-2479 AB BEARING-CONNECTING ROD (0.51-MM US)  
  240-0041 [1] BREATHER AS (CRANKCASE)  
  203-5805 [2] BUSHING  
  203-6090 [1] BUSHING  
  216-5586 [1] BUSHING (CAMSHAFT)  
  347-3148 [2] CLAMP-BAND  
  5P-0597 [1] CLAMP-HOSE  
  326-1644 [1] FILTER AS-WATER SEP & FUEL  
  220-8678 [1] SEAL-RING  
  1R-1808 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  280-6794 [1] HOSE  
  3E-8017 M [12] LOCKNUT (M10X1.5-THD)  
  0L-1026 [2] PLUG-CUP  
  0S-0519 [1] PLUG-CUP  
  3B-0623 [2] PLUG-CUP  
  4F-5695 [4] PLUG-CUP  
  248-5513 [1] REGULATOR-TEMPERATURE (92-DEG C)  
  3F-5792 [1] SEAL-O-RING  
  5P-6436 [1] SEAL-O-RING  
  033-6032 [1] SEAL-O-RING  
  1W-8407 [2] SLEEVE  
  4P-4369 [6] SPACER (12X19X23.5-MM THK)  
  242-3864 [2] SPRING  
  467-4243 [12] SPRING-GUIDE  
  116-3715 M [12] STUD-TAPERLOCK (M10X1.5X85-MM)  
  6V-5839 [12] WASHER (11X21X2.5-MM THK)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP71100041
 

430-8168: KIT-ENGINE OVERHAUL

430-8168 KIT-ENGINE OVERHAUL
(SILVER OVERHAUL KIT), C-9 MACHINE ENGINE
FOR USE WITH @@@@@187-0470@@@@@, @@@@@208-3027@@@@@, @@@@@234-2917@@@@@, @@@@@237-0283@@@@@
FIELD INSTALLATION
i05281376 SEBP7110
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  430-3914 Y [1] KIT-ENGINE OVERHAUL (BRONZE)  
   
  197-9297 [6] CROWN AS-PISTON  
   
  385-7276 [6] LINER-CYLINDER BLOCK  
  [6] RING-PISTON (INTERMEDIATE)  
  168-7209 [6] RING-PISTON (OIL CONTROL)  
  197-9299 [6] RING-PISTON (TOP)  
  7X-2908 [12] RING-RETAINING  
  167-0024 [6] SEAL-LINER  
  324-7380 [6] SKIRT-PISTON  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP71100042
 

430-4352: KIT-FRONT COVER GASKET

430-4352 KIT-FRONT COVER GASKET
PART OF 430-3914 KIT-ENGINE OVERHAUL
i05230660 SEBP7110
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4R-9999 [1] EXCLUDER-CRANKSHAFT SEAL  
  166-1781 [1] GASKET  
  245-7339 [1] SEAL-CRANKSHAFT (FRONT)  
  135-9819 [1] SEAL-INTEGRAL  
  6V-6609 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  8L-2779 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  147-0182 [1] SEAL-O-RING  
  214-7568 [3] SEAL-O-RING  
  227-5904 [1] SEAL-O-RING  
  228-4947 [2] SEAL-O-RING  
  228-7089 [2] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
  384-9992 [1] SEAL-O-RING  
  126-1757 [2] WASHER (10.85X19.3X1.27-MM THK)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP71100043
 

191-3063: LIFTING GP-ENGINE

191-3063 LIFTING GP-ENGINE
S/N 4ZF1-UP; 7AZ1-UP
FRONT AND REAR
i01533699 SEBP7110
1913063 LIFTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4766 [1] PLATE-LIFTING  
2. 166-1785 [1] PLATE-LIFTING  
3. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 6V-8675 M [3] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
 

#SEBP71100044
 

187-0472: PAN GP-OIL

187-0472 PAN GP-OIL -ENGINE
S/N 4ZF1-UP; 7AZ1-UP
39.5 LITERS. PROVIDE ENOUGH OIL TO MEET A 250 HOUR OIL ADDITION REQUIREMENT
i01533967 SEBP7110
1870472 PAN GP-OIL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 398-5596 [1] PLUG AS  
  238-5080 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
2. 351-0283 [1] VALVE AS-SHUTOFF (ENGINE OIL PAN DRAIN)  
  6V-7238 [1] VALVE-SHUTOFF  
2A. 238-5080 [1] SEAL-O-RING  
3. 421-7503 [1] SWITCH AS (ENGINE OIL)  
  213-0677 [1] SWITCH AS-LIQUID LEVEL  
3A. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3B. 238-5082 [1] SEAL-O-RING  
4. 136-4303 [1] PLUG AS-CONNECTOR (2-PIN)  
  8T-8737 [2] PLUG-SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
5. 9M-1974 [32] WASHER-HARD (8.8X16X2-MM THK)  
6. 190-6114 [1] GASKET-OIL PAN (ENGINE)  
7. 221-9806 [1] PAN-OIL  
8. 4C-9612 B SEALANT-SILICONE  
9. 6V-3918 M [32] BOLT (M8X1.25X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP71100045
 

187-0472: PAN GP-OIL

187-0472 PAN GP-OIL -ENGINE
S/N 4ZF1-UP; 7AZ1-UP
39.5 LITERS. PROVIDE ENOUGH OIL TO MEET A 250 HOUR OIL ADDITION REQUIREMENT
i02281042 SEBP7110
1870472 PAN GP-OIL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-6262 B SEALANT  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 213-0677 [1] SWITCH AS-LIQUID LEVEL (ENGINE OIL)  
  144-1636 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
3A. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTALE AS & WEDGE)
4. 136-4303 [1] PLUG AS-CONNECTOR (2-PIN)  
  8T-8737 [2] PLUG-SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
5. 189-9377 [1] SEAL-O-RING  
6. 193-1167 C [1] SEAL-INTEGRAL  
7. 237-1926 C [1] PAN AS-OIL (ENGINE)  
8. 3K-0360 [2] SEAL-O-RING  
9. 175-3676 CM [32] BOLT (M8X1.25X19.5-MM)  
10. 9S-8005 [1] PLUG (3/4-16-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP71100046
 

188-9141: PISTON & ROD GP

188-9141 PISTON & ROD GP
S/N 4ZF1-UP; 7AZ1-UP
16.1:1 RATIO
i01535046 SEBP7110
1889141 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 324-7380 [1] SKIRT-PISTON  
2. 213-3190 [1] BEARING  
3. 160-8199 [1] ROD AS  
3A. 160-8197 M [2] BOLT (M12X1.25X62-MM)  
3B. 160-8194 [1] BEARING  
4. [1] RING-PISTON (INTERMEDIATE)  
5. 524-5611 [1] PIN-PISTON  
6. 197-9367 [1] TUBE AS (PISTON COOLING JET)  
7. 168-7209 [1] RING-PISTON (OIL CONTROL)  
8. 197-9297 [1] CROWN AS-PISTON  
9. 197-9299 [1] RING-PISTON (TOP)  
10. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
11. 7X-2908 [2] RING-RETAINING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP71100047
 

169-3105: PLUG GP-ENGINE

169-3105 PLUG GP-ENGINE
S/N 4ZF1-UP; 7AZ1-UP
REQUIRED WHEN NO AIR COMPRESSOR IS USED
i01534247 SEBP7110
1693105 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-3709 [1] PLUG AS  
  238-5082 [1] SEAL-O-RING  
  360-3682 [1] PLUG-O-RING  
2. 389-3708 [2] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
3. 398-5596 [2] PLUG AS  
    (EACH INCLUDES)
  238-5080 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
 

#SEBP71100048
 

187-0480: PULLEY GP

187-0480 PULLEY GP
S/N 4ZF1-UP; 7AZ1-UP
i01534186 SEBP7110
1870480 PULLEY GP Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-3810 [1] PULLEY-FAN  
2. 190-4155 [1] BELT-SERPENTINE  
3. 6V-5215 M [6] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
 

#SEBP71100049
 

206-2044: PULLEY GP-CRANKSHAFT

206-2044 PULLEY GP-CRANKSHAFT
S/N 4ZF1-UP; 7AZ1-UP
i02107357 SEBP7110
2062044 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7381 [1] PLATE-CLAMP  
2. 200-2275 [1] PULLEY  
3. 8T-3666 M [4] BOLT (M14X2X60-MM)  
  M   METRIC PART
 

Information:

Special Instruction
1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000}
1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse And Salvage Guidelines
Service Magazine
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24
Precious Metals Engine Rebuild Kits Are Available for C-9 Machine Engines {1000}
2013/03/22

Caterpillar Parts SIS Catalog 330C :

20R-1478 KIT-ENGINE OVERHAUL
20R-1465 KIT-ENGINE OVERHAUL
430-7210 KIT-ENGINE GASKET
428-9317 KIT-ENGINE GASKET
HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
187-0473 HOUSING GP-FLYWHEEL
GEAR GP-FRONT
205-1321 GEAR GP-FRONT
FLYWHEEL GP
116-5386 FLYWHEEL GP
430-8168 KIT-ENGINE OVERHAUL
430-4352 KIT-FRONT COVER GASKET
LIFTING GP-ENGINE
191-3063 LIFTING GP-ENGINE
PAN GP-OIL
187-0472 PAN GP-OIL
PAN GP-OIL
187-0472 PAN GP-OIL
PISTON & ROD GP
188-9141 PISTON & ROD GP
PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
PULLEY GP
187-0480 PULLEY GP

Truck sale:

Caterpillar 330C
 
Caterpillar 330C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
 
375,750 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 330 CF, Crawler Excavators, Construction
379,533 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
372,345 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
330,000 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.