ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
#SEBP71290990
353-4500: STARTING MOTOR GP-ELECTRIC
353-4500 STARTING MOTOR GP-ELECTRIC
12-VOLT
FOR USE WITH @@@@@189-9374@@@@@, RH STARTER LOCATION
AN ATTACHMENT
12-VOLT
FOR USE WITH @@@@@189-9374@@@@@, RH STARTER LOCATION
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 134-3355 | [1] | STRAP AS | |
| 3. | 293-4853 JL | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 4. | 3E-9854 M | [1] | BOLT (M8X1.25X20-MM) | |
| 5. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 6. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 352-6067 J | [1] | KIT-SWITCH (RELAY) | ||
| (INCLUDES SWITCH AS, COVER, BOLTS & ANCHOR) | ||||
| 359-4539 L | [1] | KIT-HARDWARE (MAGNETIC SWITCH)(MAGNETIC SWITCH) | ||
| (INCLUDES NUTS & WASHER) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
#SEBP71290991
353-4501: STARTING MOTOR GP-ELECTRIC
353-4501 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
#SEBP71290992
448-4402: STARTING MOTOR GP-ELECTRIC
448-4402 STARTING MOTOR GP-ELECTRIC
12-VOLT. LEFT HAND
FOR USE WITH @@@@@425-5937@@@@@
AN ATTACHMENT
12-VOLT. LEFT HAND
FOR USE WITH @@@@@425-5937@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 170-9328 | [1] | STRAP AS-GROUND | |
| 3. | 287-7136 Y | [1] | STARTING MOTOR GP-ELECTRIC | |
| 4. | 176-2543 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 5. | 344-5674 M | [1] | NUT (M8X1.25-THD) | |
| 6. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71290993
525-2088: STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 3. | 278-8844 | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 4. | 520-6650 | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 423-9049 B | [1] | SEAL-O-RING | ||
| 5. | 2S-5658 | [3] | WASHER-HARD (17X29X3-MM THK) | |
| 6. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 7. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP71290994
525-2089: STARTING MOTOR GP-ELECTRIC
525-2089 STARTING MOTOR GP-ELECTRIC -24-VOLT, RH
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 3. | 278-8844 | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 4. | 520-6649 | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 423-9049 B | [1] | SEAL-O-RING | ||
| 5. | 2S-5658 | [3] | WASHER-HARD (17X29X3-MM THK) | |
| 6. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 3E-9854 M | [1] | BOLT (M8X1.25X20-MM) | |
| 8. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP71290995
541-1677: STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 2. | 9Y-6089 | [1] | GASKET | |
| 3. | 541-1720 Y | [1] | STARTING MOTOR GP-ELECTRIC (12-VOLT) | |
| 4. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 5. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71290996
541-1720: STARTING MOTOR GP-ELECTRIC
541-1720 STARTING MOTOR GP-ELECTRIC
12-VOLT
PART OF 541-1677 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
12-VOLT
PART OF 541-1677 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| (INCLUDES BUSHINGS & WASHERS) | ||||
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 3R-8801 | [1] | CLAMP | |
| 4. | 8F-1434 | [2] | LOCKWASHER | |
| 5. | 3E-7771 | [1] | HOUSING AS (STARTING MOTOR) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 7A. | 9G-4101 | [1] | BUSHING-END | |
| 7B. | 3T-3424 | [1] | PLUG-FELT | |
| 7C. | 3T-3423 | [1] | CUP | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS | |
| 11. | 2J-8163 | [2] | SEAL-O-RING | |
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 3T-3434 B | [6] | PLUG | |
| 14. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 15. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 16. | 8C-3089 | [1] | SEAL-O-RING | |
| 17. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 18. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 19. | 7L-2894 | [4] | GASKET | |
| 20. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 21. | 4M-1854 | [1] | SHAFT-LEVER | |
| 22. | 1H-1023 | [1] | SEAL-O-RING | |
| 23. | 2D-6392 | [1] | SEAL-O-RING | |
| 24. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 25. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 26. | 2H-3429 | [1] | RING-RETAINING | |
| 27. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 28. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 30. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 32. | 1M-9968 | [1] | BUSHING | |
| 33. | 2F-6678 | [1] | SEAL-LIP TYPE | |
| 34. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 35. | 7F-3488 | [6] | SHOE-POLE | |
| 36. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 37. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 38. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| 39. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 40. | 362-5020 | [1] | SOLENOID AS-STARTING MOTOR (12-VOLT) | |
| 41. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 42. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 43. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 44. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP71290997
542-1818: STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 2. | 278-8844 | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 3. | 436-9106 | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 423-9049 | [1] | SEAL-O-RING | ||
| 4. | 2S-5658 | [3] | WASHER-HARD (17X29X3-MM THK) | |
| 5. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 6. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 7. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP71290998
542-1819: STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 2. | 278-8844 | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 3. | 436-9106 | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 423-9049 | [1] | SEAL-O-RING | ||
| 4. | 2S-5658 | [3] | WASHER-HARD (17X29X3-MM THK) | |
| 5. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 7. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP71290999
542-1820: STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 2. | 278-8844 | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 3. | 502-3919 | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 4. | 2S-5658 | [3] | WASHER-HARD (17X29X3-MM THK) | |
| 5. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 6. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 7. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Engine News
New Starters Are Now Used for Certain C9.3 Engines {1453}
New Starters Are Now Used for Certain C9.3 Engines {1453}
New Starters Are Now Used for Certain C9.3 Engines {1453}
Operation and Maintenance Manual
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Testing and Adjusting
Disassembly and Assembly
