BASIC ENGINE
AIR COMPRESSOR GPVALVE MECHANISM GP
SERPENTINE/V-BELTS
BASIC ENGINE
AIR COMPRESSOR GP
#SEBP71300020
360-4133: AIR COMPRESSOR GP
360-4133 AIR COMPRESSOR GP -BASIC
PROVIDES A CAT 290 TWIN CYLINDER COMPRESSOR FOR INDUSTRIAL APPLICATIONS WITH THE VALVE HEAD AND 2.8 BASE MODULE GEAR
PART OF 360-4134 AIR COMPRESSOR GP
AN ATTACHMENT
PROVIDES A CAT 290 TWIN CYLINDER COMPRESSOR FOR INDUSTRIAL APPLICATIONS WITH THE VALVE HEAD AND 2.8 BASE MODULE GEAR
PART OF 360-4134 AIR COMPRESSOR GP
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 225-5222 | [1] | VALVE AS-PRESSURE RELIEF (AIR COMPRESSOR) | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 6V-5221 M | [6] | BOLT (M8X1.25X80-MM) | ||
| 099-2374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | ||
| 8T-0267 M | [8] | BOLT-SOCKET HEAD (M6X1X12-MM) | ||
| 9M-1974 | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 335-6328 | [2] | KIT-UNLOADER (AIR COMPRESSOR) | ||
| (EACH INCLUDES O-RING, GASKET, RETURN SPRING, BALANCE PISTON, & ESS PISTON AS) | ||||
| 260-6821 | [1] | KIT-SEAL | ||
| (INCLUDES END COVER O-RING, CRANKCASE COVER GASKETS, REAR COVER GASKET, & INSTRUCTION SHEET)) | ||||
| 260-6823 | [1] | KIT-GASKET (AIR COMPRESSOR) | ||
| (INCLUDES INLET VALVE & HEAD GASKETS) | ||||
| M | METRIC PART | |||
#SEBP71300021
360-4134: AIR COMPRESSOR GP
360-4134 AIR COMPRESSOR GP
PROVIDES AN AIR COMPRESSOR GP WITH A CAT 290 AIR COMPRESSOR (2.8 BASE MODULE GEAR). REQUIRES NATURALLY ASPIRATED AIR SUPPLY LINE ONLY
Type 1
AN ATTACHMENT
PROVIDES AN AIR COMPRESSOR GP WITH A CAT 290 AIR COMPRESSOR (2.8 BASE MODULE GEAR). REQUIRES NATURALLY ASPIRATED AIR SUPPLY LINE ONLY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-3505 | [1] | SEAL | |
| 2. | 360-4133 Y | [1] | AIR COMPRESSOR GP | |
| 3. | 430-5358 | [1] | BRACKET-MOUNTING | |
| 4. | 437-9936 | [1] | BRACKET-SUPPORT | |
| 5. | 437-9937 | [3] | SPACER (10.2X25.4X18-MM THK) | |
| 6. | 0S-1571 | [3] | BOLT (3/8-16X1.75-IN) | |
| 7. | 198-4766 | [3] | WASHER-HARD (11X25X10-MM THK) | |
| 8. | 1F-7958 | [3] | NUT-FULL (1/2-13-THD) | |
| 9. | 3E-4353 | [3] | WASHER-HARD (11X25X3-MM THK) | |
| 10. | 5P-8245 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 6V-4249 M | [3] | BOLT (M10X1.5X50-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71300022
360-4134: AIR COMPRESSOR GP
360-4134 AIR COMPRESSOR GP
PROVIDES AN AIR COMPRESSOR GP WITH A CAT 290 AIR COMPRESSOR (2.8 BASE MODULE GEAR). REQUIRES NATURALLY ASPIRATED AIR SUPPLY LINE ONLY
Type 2
AN ATTACHMENT
PROVIDES AN AIR COMPRESSOR GP WITH A CAT 290 AIR COMPRESSOR (2.8 BASE MODULE GEAR). REQUIRES NATURALLY ASPIRATED AIR SUPPLY LINE ONLY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-3505 | [1] | SEAL | |
| 2. | 440-1618 CY | [1] | AIR COMPRESSOR GP | |
| 3. | 430-5358 | [1] | BRACKET-MOUNTING | |
| 4. | 7X-0584 C | [1] | WASHER-HARD (13.5X20.5X2-MM THK) | |
| 5. | 437-9937 | [3] | SPACER (10.2X25.4X18-MM THK) | |
| 6. | 0S-1571 | [3] | BOLT (3/8-16X1.75-IN) | |
| 7. | 198-4766 | [3] | WASHER-HARD (11X25X10-MM THK) | |
| 8. | 1F-7958 | [3] | NUT-FULL (1/2-13-THD) | |
| 9. | 3E-4353 | [3] | WASHER-HARD (11X25X3-MM THK) | |
| 10. | 5P-8245 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 6V-4249 M | [3] | BOLT (M10X1.5X50-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71300023
360-4139: AIR COMPRESSOR GP
360-4139 AIR COMPRESSOR GP
PROVIDES AN AIR COMPRESSOR GP WITH A BA-921 CRH AIR COMPRESSOR (2.8 BASE MODULE GEAR). REQUIRES NATURALLY ASPIRATE AIR SUPPLY LINE ONLY
Type 1
AN ATTACHMENT
PROVIDES AN AIR COMPRESSOR GP WITH A BA-921 CRH AIR COMPRESSOR (2.8 BASE MODULE GEAR). REQUIRES NATURALLY ASPIRATE AIR SUPPLY LINE ONLY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-3505 | [1] | SEAL | |
| 2. | 351-7085 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 3. | 385-0944 Y | [1] | AIR COMPRESSOR GP | |
| 4. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 5. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
| 6. | 9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 7. | 1F-7958 | [3] | NUT-FULL (1/2-13-THD) | |
| 8. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 9. | 5P-8245 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71300024
360-4139: AIR COMPRESSOR GP
360-4139 AIR COMPRESSOR GP
PROVIDES AN AIR COMPRESSOR GP WITH A BA-921 CRH AIR COMPRESSOR (2.8 BASE MODULE GEAR). REQUIRES NATURALLY ASPIRATE AIR SUPPLY LINE ONLY
Type 2
AN ATTACHMENT
PROVIDES AN AIR COMPRESSOR GP WITH A BA-921 CRH AIR COMPRESSOR (2.8 BASE MODULE GEAR). REQUIRES NATURALLY ASPIRATE AIR SUPPLY LINE ONLY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-3505 | [1] | SEAL | |
| 2. | 444-3535 C | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 3. | 385-0944 Y | [1] | AIR COMPRESSOR GP | |
| 4. | 165-3931 C | [2] | BOLT (3/8-16X1.75-IN) | |
| 5. | 6V-5842 CM | [2] | BOLT (M10X1.5X40-MM) | |
| 6. | 437-9937 C | [2] | SPACER (10.2X25.4X18-MM THK) | |
| 7. | 1F-7958 | [3] | NUT-FULL (1/2-13-THD) | |
| 8. | 198-4766 C | [2] | WASHER-HARD (11X25X10-MM THK) | |
| 9. | 5P-8245 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71300025
385-0944: AIR COMPRESSOR GP
385-0944 AIR COMPRESSOR GP
PART OF 360-4139 AIR COMPRESSOR GP
FOR USE WITH 2.8 BASE MODULE GROUP
AN ATTACHMENT
PART OF 360-4139 AIR COMPRESSOR GP
FOR USE WITH 2.8 BASE MODULE GROUP
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-1974 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 2. | 138-9057 | [1] | VALVE (PRESSURE RELIEF) | |
| 3. | 099-2374 M | [2] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| 4. | 6V-5221 M | [6] | BOLT (M8X1.25X80-MM) | |
| 5. | 8T-0267 M | [4] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 260-6823 | [1] | KIT-GASKET | ||
| (INCLUDES END COVER O-RING, CRANKCASE COVER GASKET, REAR COVER GASKET, & INSTRUCTION SHEET) | ||||
| 335-6328 | [1] | KIT-UNLOADER (AIR COMPRESSOR) | ||
| (INCLUDES RETURN SPRING, GASKET, BALANCE PISTON, O-RING, ESS PISTON AS, & LUBRICANT) | ||||
| 351-7080 | [1] | KIT-GASKET (AIR COMPRESSOR) | ||
| (INCLUDES INLET REED VALVE GASKET & CYLINDER HEAD GASKETS) | ||||
| M | METRIC PART | |||
#SEBP71300026
440-1618: AIR COMPRESSOR GP
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-1974 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 2. | 225-5222 | [1] | VALVE AS-PRESSURE RELIEF | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3. | 099-2374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| 4. | 6V-5221 M | [6] | BOLT (M8X1.25X80-MM) | |
| 5. | 8T-0267 M | [8] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 260-6821 | [1] | KIT-SEAL | ||
| (INCLUDES O-RING,CRANKCASE COVER GASKET & REAR COVER GASKET) | ||||
| 260-6823 | [1] | KIT-GASKET | ||
| (INCLUDES VALVE & GASKET) | ||||
| 335-6328 | [2] | KIT-UNLOADER (AIR COMPRESSOR) | ||
| (EACH I NCLUDES SPRING, GASKET, PISTON, O-RING & PISTON ASSEMBLY) | ||||
| M | METRIC PART | |||
#SEBP71300027
342-6192: BASE GP-VALVE COVER & INJ HARN
342-6192 BASE GP-VALVE COVER & INJ HARN
PART OF 519-4061, 519-4062 ENGINE AR-CORE
PART OF 519-4061, 519-4062 ENGINE AR-CORE
For full view, you need register
#SEBP71300028
348-8106: BELT GP-SERPENTINE
348-8106 BELT GP-SERPENTINE
PROVIDES A 8-RIB POLY-VEE BELT THAT HAS AN EFFECTIVE LENGTH OF 1490 MM
AN ATTACHMENT
PROVIDES A 8-RIB POLY-VEE BELT THAT HAS AN EFFECTIVE LENGTH OF 1490 MM
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 374-8470 | [1] | BELT-SERPENTINE |
#SEBP71300029
354-2327: BELT GP-SERPENTINE
354-2327 BELT GP-SERPENTINE
PROVIDES A 8 RIB POLY-VEE BELT THAT IS 2622-MM IN LENGTH
AN ATTACHMENT
PROVIDES A 8 RIB POLY-VEE BELT THAT IS 2622-MM IN LENGTH
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 374-8474 | [1] | BELT-SERPENTINE |
Information:
BASIC ENGINE
AIR COMPRESSOR GP
Operation and Maintenance Manual
Specifications
