ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP71410290
492-4186: WIRING GP-ENGINE
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 392-0649 | [1] | WIRE AS | |
| 2. | 461-8991 | [2] | CABLE AS | |
| (EACH INCLUDES) | ||||
| 277-5662 | [1] | TERMINAL | ||
| 318-9351 | [1] | TERMINAL-CABLE | ||
| 3. | 480-1669 | [1] | CABLE AS | |
| 4. | 342-9913 M | [2] | BOLT-FLANGE HEAD (M10X1.5X20-MM) | |
| 5. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
#SEBP71410291
493-2303: WIRING GP-ENGINE
#SEBP71410292
493-2304: WIRING GP-ENGINE
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS#SEBP71410293
493-2305: WIRING GP-ENGINE
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS#SEBP71410294
505-3200: WIRING GP-ENGINE
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| 260-6682 | [4] | RIVET | ||
| 318-1181 Y | [1] | SENSOR GP-SPEED (MAGNETIC) | ||
| 345-1116 BY | [1] | HARNESS AS-ENGINE | ||
| 350-0525 BY | [1] | SWITCH GP-PUSH BUTTON (EMERGENCY STOP) | ||
| 462-0635 Y | [1] | HARNESS AS-PANEL (ENGINE) | ||
| 477-4476 | [1] | HARNESS AS-POWER (ALTERNATOR) | ||
| 1S-9593 | [6] | STRAP-CABLE | ||
| 2L-8079 | [4] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 104-1995 | [6] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 125-7876 | [5] | TUBE-HEAT SHRINK (17.78-MM DIA) | ||
| 477-9885 | [1] | HARNESS AS-ENGINE | ||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 2L-8067 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71410295
505-3201: WIRING GP-ENGINE
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| 260-6682 | [4] | RIVET | ||
| 318-1181 Y | [1] | SENSOR GP-SPEED (MAGNETIC) | ||
| 345-1116 BY | [1] | HARNESS AS-ENGINE | ||
| 350-0525 BY | [1] | SWITCH GP-PUSH BUTTON (EMERGENCY STOP) | ||
| 462-0635 Y | [1] | HARNESS AS-PANEL | ||
| 477-9885 | [1] | HARNESS AS-ENGINE (ALTERNATOR JUMPER) | ||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 2L-8067 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 505-3199 Y | [1] | HARNESS AS-POWER (ALTERNATOR) | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71410296
561-0227: WIRING GP-ENGINE
561-0227 WIRING GP-ENGINE
S/N DH41-UP
FOR USE WITH I6 OPTIMISED 400-700 KVA
AN ATTACHMENT
S/N DH41-UP
FOR USE WITH I6 OPTIMISED 400-700 KVA
AN ATTACHMENT
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 345-1116 BY | [1] | HARNESS AS-ENGINE | ||
| 560-9559 Y | [1] | HARNESS AS-ENGINE | ||
| 525-8345 Y | [1] | HARNESS AS-POWER | ||
| 350-0525 BY | [1] | SWITCH GP-PUSH BUTTON (EMERGENCY STOP) | ||
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 260-6682 | [4] | RIVET | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71410297
561-0228: WIRING GP-ENGINE
561-0228 WIRING GP-ENGINE
S/N DH41-UP
FOR USE WITH I6 OPTIMISED 400-700 KVA
AN ATTACHMENT
S/N DH41-UP
FOR USE WITH I6 OPTIMISED 400-700 KVA
AN ATTACHMENT
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 560-9559 Y | [1] | HARNESS AS-ENGINE | ||
| 345-1116 BY | [1] | HARNESS AS-ENGINE | ||
| 350-0525 BY | [1] | SWITCH GP-PUSH BUTTON (EMERGENCY STOP) | ||
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 525-8338 | [1] | HARNESS AS-ENGINE (GENERATOR) | ||
| 1S-9593 B | [8] | STRAP-CABLE | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 246-2009 | [6] | TERMINAL | ||
| 246-2010 | [6] | INSULATOR | ||
| 260-6682 | [4] | RIVET | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71410298
561-0229: WIRING GP-ENGINE
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 560-9559 Y | [1] | HARNESS AS-ENGINE | ||
| 345-1116 BY | [1] | HARNESS AS-ENGINE | ||
| 525-8345 Y | [1] | HARNESS AS-POWER | ||
| 350-0525 BY | [1] | SWITCH GP-PUSH BUTTON (EMERGENCY STOP) | ||
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 260-6682 | [4] | RIVET | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71410299
561-0230: WIRING GP-ENGINE
561-0230 WIRING GP-ENGINE
S/N DH41-UP
FOR USE WITH I6 OPTIMISED 400-700 KVA
AN ATTACHMENT
S/N DH41-UP
FOR USE WITH I6 OPTIMISED 400-700 KVA
AN ATTACHMENT
Parts for your C13 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 345-1116 BY | [1] | HARNESS AS-ENGINE (CANOPY) | ||
| 560-9559 Y | [1] | HARNESS AS-ENGINE (PANEL) | ||
| 350-0525 BY | [1] | SWITCH GP-PUSH BUTTON (EMERGENCY STOP) | ||
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 525-8338 | [1] | HARNESS AS-ENGINE (GENERATOR) | ||
| 246-2010 | [6] | INSULATOR | ||
| 1S-9593 B | [8] | STRAP-CABLE | ||
| 246-2009 | [6] | TERMINAL | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 260-6682 | [4] | RIVET | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
A New Recommendation for Spacing the AC Sensing Harness Pins Is Now Used on Certain C13, C15, and C18 Engines {1000, 1404, 1408}
A New Recommendation for Spacing the AC Sensing Harness Pins Is Now Used on Certain C13, C15, and C18 Engines {1000, 1404, 1408}
A New Recommendation for Spacing the AC Sensing Harness Pins Is Now Used on Certain C13, C15, and C18 Engines {1000, 1404, 1408}
Improved Wiring For Battery Charger is Now Used on Certain Cat<SUP>®</SUP> Products {1408, 751B}
Improved Wiring For Battery Charger is Now Used on Certain Cat® Products {1408, 751B}
Improved Wiring For Battery Charger is Now Used on Certain Cat® Products {1408, 751B}
Operation and Maintenance Manual
Special Instruction
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Specifications
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Troubleshooting
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C13, C15, and C18 Generator Set Engines
C13, C15, and C18 Generator Set Engines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C13, C15, and C18 Generator Set Engines
C13, C15, and C18 Generator Set Engines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C13, C15, and C18 Generator Set Engines
C13, C15, and C18 Generator Set Engines
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C13, C15, and C18 Generator Set Engines
C13, C15, and C18 Generator Set Engines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C13, C15, and C18 Generator Set Engines
C13, C15, and C18 Generator Set Engines
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C13, C15, and C18 Generator Set Engines
C13, C15, and C18 Generator Set Engines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C13, C15, and C18 Generator Set Engines
C13, C15, and C18 Generator Set Engines
CID 0544 FMI 02 Engine Cooling Fan Speed Sensor loss of signal
C13, C15, and C18 Generator Set Engines
C13, C15, and C18 Generator Set Engines
Caterpillar Parts SIS Catalog C13 :
Truck sale:
CATERPILLAR C13 2014
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid


