AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

456-1351 ALTERNATOR GP-CHARGING 12-VOLT, 150-AMPERE PART OF 520-4644, 526-8888 ENGINE AR-PRIMARY C7.1


ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
CONTROL GP-ELECTRONIC
ELECTRONICS GP-ENGINE
HARNESS GP
ELECTRONICS GP-ENGINE

INDUSTRIAL ENGINE C7.1 INDUSTRIAL ENGINE G9R
 C7.1 Industrial Engine G9R00001-UP SEBP7151 C7.1 G9R   (2011)

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
440-6724 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
440-6724 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
456-1351 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
456-1352 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
561-3000 ALTERNATOR GP-CHARGING
 

#SEBP71510470
 

456-1351: ALTERNATOR GP-CHARGING

456-1351 ALTERNATOR GP-CHARGING
12-VOLT, 150-AMPERE
PART OF 520-4644, 526-8888 ENGINE AR-PRIMARY
i06211852 SEBP7151
4561351 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-0859 M [4] BOLT (M10X1.5X35-MM)  
2. 164-7468 M [4] BOLT (M10X1.5X95-MM)  
3. 321-8927 [1] ALTERNATOR (12-VOLT, 150-AMPERE)  
4. 321-8952 [1] BRACKET AS  
  161-9820 [2] PIN  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP71510471
 

456-1352: ALTERNATOR GP-CHARGING

456-1352 ALTERNATOR GP-CHARGING
PART OF 488-6687, 533-3588 ENGINE AR-PRIMARY
i06920268 SEBP7151
4561352 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-0859 M [4] BOLT (M10X1.5X35-MM)  
2. 164-7468 M [4] BOLT (M10X1.5X95-MM)  
3. 321-8929 [1] ALTERNATOR (24-VOLT, 100-AMPERE)  
4. 321-8952 [1] BRACKET AS  
  161-9820 [2] PIN  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP71510472
 

561-3000: ALTERNATOR GP-CHARGING

561-3000 ALTERNATOR GP-CHARGING
PART OF 440-6724 ALTERNATOR GP-CHARGING
i07584575 SEBP7151
5613000 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-9656 [1] FRAME AS-DRIVE END  
2. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
3. 185-2639 [1] FAN AS  
4. 1H-3244 [1] LOCKWASHER  
5. 228-9655 [1] FRAME AS-ALTERNATOR  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
8. 228-9657 [1] COVER AS  
9. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 185-2647 [1] GROMMET  
11. 9L-6770 [1] CAP-DUST  
12. 423-2775 [1] STATOR AS (24-VOLT, 95-AMPERE)  
13. 185-2638 [2] COLLAR  
14. 185-2654 [1] PLATE  
15. 185-2650 [1] ROTOR AS  
16. 185-2644 [1] COIL AS  
17. 561-3457 [1] REGULATOR AS  
18. 6V-8189 [1] NUT (5/16-18-THD)  
19. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 3F-9556 [1] LOCKWASHER  
21. 185-2655 [1] KIT-BEARING (ALTERNATOR)  
    (INCLUDES BEARINGS)
22. 199-8436 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES HOLDERS AS, PLATE, INSULATOR, PIN, BOLTS, WASHERS, GROMMET & NUT)
23. 199-7891 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, WASHERS & NUTS)
24. 185-2658 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES BOLTS AND WASHERS)
 

#SEBP71510473
 

371-2536: CONTROL GP-ELECTRONIC

371-2536 CONTROL GP-ELECTRONIC
PART OF 461-4649, 461-4656, 461-4658, 479-9398, 482-0212, 484-2939, 485-8027, 486-4250, 488-6687, 491-2606, 491-4973, 491-4980, 491-4993, 491-7124, 492-3021, 493-1019, 494-6807, 495-8349, 499-7181, 501-2466, 502-9462, 504-3629, 504-5365, 504-8134, 504-9579, 506-9918, 507-8016, 508-0270, 510-1088, 513-8513, 519-4128, 520-3152, 520-4644, 526-0511, 526-7210, 526-8888, 528-3358, 531-2492, 533-3588, 536-6675, 553-1809, 562-8873 ENGINE AR-PRIMARY
i05580272 SEBP7151
3712536 CONTROL GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-0576 [8] MOUNT-ISOLATION  
2. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
3. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
4. 278-5203 [4] SPACER  
5. 374-2641 [1] CONTROL GP-UNPROGRAMMED  
6. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
  M   METRIC PART
 

#SEBP71510474
 

371-2537: CONTROL GP-ENGINE ELECTRONIC

371-2537 CONTROL GP-ENGINE ELECTRONIC
PART OF 470-8814, 494-2073 ENGINE AR-PRIMARY
i05916236 SEBP7151
3712537 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
2. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
3. 278-5203 [4] SPACER  
4. 155-0576 [8] MOUNT-ISOLATION  
5. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
6. 374-2640 [1] CONTROL GP-UNPROGRAMMED  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP71510475
 

385-5997: HARNESS AS-ENGINE

385-5997 HARNESS AS-ENGINE
PART OF 395-0113 WIRING GP-ENGINE
i05716573 SEBP7151
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  377-6932 [1] COVER  
  292-2896 E CONDUIT (16.9-MM ID)(45-CM)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  245-1044 [2] LOCK-CONNECTOR  
  316-9351 [7] MOUNTING-CABLE TIE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  238-8245 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
  238-8247 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  245-1043 [1] PLUG GP-CONNECTOR (64-PIN)  
  267-7208 [1] RING-RETAINING  
  274-4990 [1] SEAL  
  267-7207 M [1] BOLT-SPECIAL (M6X1-THD)  
  281-8804 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  455-0705 [1] SEAL-CONNECTOR  
  536-7946 [1] PLUG AS-CONNECTOR  
  444-7604 [2] SOCKET-CONNECTOR  
  536-7945 [1] HARNESS AS-WIRING  
  444-7604 [3] SOCKET-CONNECTOR  
  245-1048 [33] PLUG-CONNECTOR (1-PIN)  
  185-1860 [5] SEAL-WIRE  
  267-9572 [31] SOCKET-CONNECTION (18-GA)  
  9X-3402 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [16] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  217-9039 [6] STRAP-CABLE  
  356-1219 [1] STRAP-CABLE  
  206-1345 [14] STRAP-CABLE  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  194-5226 [12] WIRE AS (16-GA)  
    -OR-
  194-5227 [12] WIRE AS (14-GA)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP71510476
 

416-5388: HARNESS AS-ENGINE

416-5388 HARNESS AS-ENGINE
PART OF 418-0928 WIRING GP-ENGINE
i07563196 SEBP7151
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [16] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  194-5226 [12] WIRE AS (16-GA)  
    -OR-
  194-5227 [12] WIRE AS (14-GA)  
  185-1860 [5] SEAL-WIRE  
  206-1345 [14] STRAP-CABLE  
  217-9039 [6] STRAP-CABLE  
  238-8247 [2] PLUG AS-CONNECTOR (2-PIN)  
  238-8245 [1] PLUG AS-CONNECTOR (2-PIN)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH PLUG AS INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  245-1043 [1] PLUG GP-CONNECTOR (64-PIN)  
  267-7207 M [1] BOLT-SPECIAL (M6X1-THD)  
  245-1044 [2] LOCK-CONNECTOR  
  267-9572 [31] SOCKET-CONNECTION (18-GA)  
  245-1048 [33] PLUG-CONNECTOR (1-PIN)  
  281-8804 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  455-0705 [1] SEAL-CONNECTOR  
  292-2893 E CONDUIT (10.1-MM ID)(70-CM)  
  292-2896 E CONDUIT (16.9-MM ID)(45-CM)  
  316-9351 [5] MOUNTING-CABLE TIE  
  372-6382 [5] SOCKET-CONNECTOR  
  356-1219 [1] STRAP-CABLE  
  377-6932 [1] COVER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP71510477
 

416-5399: HARNESS AS-SENSOR

416-5399 HARNESS AS-SENSOR
UNITY LCR C7.1 T3
PART OF 424-5516 WIRING GP-ENGINE
i05706065 SEBP7151
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  155-2271 [6] KIT-CONNECTING PLUG (4-PIN)  
    (EACH CONNECTOR KIT INCLUDES CONNECTOR AS & WEDGE)
  245-1044 [2] LOCK-CONNECTOR  
  316-9351 [7] MOUNTING-CABLE TIE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  238-8245 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
  238-8247 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  245-1043 [1] PLUG GP-CONNECTOR (64-PIN)  
  267-7207 M [1] BOLT-SPECIAL (M6X1-THD)  
  281-8804 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  455-0705 [1] SEAL-CONNECTOR  
  245-1048 [26] PLUG-CONNECTOR (1-PIN)  
  8T-8737 [2] PLUG-SEAL  
  185-1860 [5] SEAL-WIRE  
  267-9572 [38] SOCKET-CONNECTION (18-GA)  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [16] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  217-9039 [7] STRAP-CABLE  
  206-1345 [14] STRAP-CABLE  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  194-5226 [12] WIRE AS (16-GA)  
    -OR-
  194-5227 [12] WIRE AS (14-GA)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP71510478
 

375-8407: HARNESS AS-WIRING

375-8407 HARNESS AS-WIRING
PART OF 395-0113, 418-0928, 424-5516 WIRING GP-ENGINE
i05716574 SEBP7151
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  113-4630 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  332-7865 [1] TIE-CABLE  
 

#SEBP71510479
 

395-0112: MOUNTING GP-ELECTRONIC CONTROL

395-0112 MOUNTING GP-ELECTRONIC CONTROL
PART OF 461-4649, 461-4656, 461-4658, 470-8814, 479-9398, 482-0212, 484-2939, 485-8027, 486-4250, 488-6687, 491-2606, 491-4973, 491-4980, 491-4993, 491-7124, 492-3021, 493-1019, 494-2073, 494-6807, 495-8349, 499-7181, 501-2466, 502-9462, 504-3629, 504-5365, 504-8134, 504-9579, 506-9918, 507-8016, 508-0270, 510-1088, 513-8513, 519-4128, 520-3152, 520-4644, 526-0511, 526-7210, 526-8888, 528-3358, 531-2492, 533-3588, 536-6675, 553-1809, 562-8873 ENGINE AR-PRIMARY
i05581216 SEBP7151
3950112 MOUNTING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C7.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 446-1268 [1] BRACKET AS  
2. 6I-0292 M [2] BOLT (M8X1.25X140-MM)  
3. 6I-0293 M [2] BOLT (M8X1.25X80-MM)  
  M   METRIC PART
 

Information:

Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Alternator - Inspect
C7.1 Industrial Engine
Belt - Inspect
C7.1 Industrial Engine
Belt Tensioner - Check
C7.1 Industrial Engine
Alternator and Fan Belts - Replace
C7.1 Industrial Engine
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Technical Information Bulletin
Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405}
Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405}
Specifications
Alternator
C7.1 Industrial Engine
Testing and Adjusting
Alternator - Test
C7.1 Industrial Engine
Charging System - Test
C7.1 Industrial Engine
Troubleshooting
Alternator Problem - Charging Problem and/or Noisy Operation
C4.4 and C7.1 Engines
Disassembly and Assembly
Alternator - Install
C7.1 Industrial Engine
Alternator - Remove
C7.1 Industrial Engine
Alternator Belt - Remove and Install
C7.1 Industrial Engine
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

Caterpillar Parts SIS Catalog C7.1 :

ALTERNATOR GP-CHARGING
440-6724 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
440-6724 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
392-2023 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
385-8001 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
377-0721 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
377-0720 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
235-7133 ALTERNATOR GP-CHARGING
RAIL GP-FUEL
394-9639 RAIL GP-FUEL
ALTERNATOR GP-CHARGING
456-1352 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
561-3000 ALTERNATOR GP-CHARGING
CONTROL GP-ELECTRONIC
371-2536 CONTROL GP-ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
371-2537 CONTROL GP-ENGINE ELECTRONIC
385-5997 HARNESS AS-ENGINE
416-5388 HARNESS AS-ENGINE
416-5399 HARNESS AS-SENSOR
375-8407 HARNESS AS-WIRING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.