AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

441-4624 PLATE & MOUNTING GP-COVER -ECM PART OF 441-4621 INSTALLATION AR-ENGINE 308E2 SR MINI HYD EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
COVER GP
SENSOR GP
STARTING MOTOR GP
SWITCH GP
WIRING GP

MINI HYD EXCAVATOR 308E2 SR MINI HYD EXCAVATOR SR8
 308E 2SR Mini Hydraulic Excavator SR800001-UP (MACHINE) POWERED BY C3.3B Engine SEBP7155 308E2 SR SR8   (2014)

ELECTRICAL AND STARTING SYSTEM

COVER GP
PLATE & MOUNTING GP-COVER
441-4624 PLATE & MOUNTING GP-COVER
 

#SEBP71550090
 

441-4624: PLATE & MOUNTING GP-COVER

441-4624 PLATE & MOUNTING GP-COVER -ECM
PART OF 441-4621 INSTALLATION AR-ENGINE
i05871075 SEBP7155
4414624 PLATE & MOUNTING GP-COVER Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 441-4626 [1] PLATE AS  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
  441-4628 [1] PLATE  
2. 441-4627 [1] PLATE  
3. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
5. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
6. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
7. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP71550091
 

123-1515: SENSOR & MOUNTING GP

123-1515 SENSOR & MOUNTING GP
PART OF 296-0927 STICK AR-HOE
AN ATTACHMENT
i05184824 SEBP7155
1231515 SENSOR & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4971 M [2] BOLT (M6X1X30-MM)  
2. 5C-2890 M [3] NUT (M6X1-THD)  
3. [1] LEVER AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
4. 120-0044 [1] SENSOR AS-POSITION  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 9X-2328 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
7. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
8. 8C-3111 [2] ROD END  
9. [1] ROD-CONTROL  
10. 099-0492 M [1] LOCKNUT (M6X1-THD)  
11. 5C-9553 M [2] BOLT (M6X1X16-MM)  
  M   METRIC PART
 

#SEBP71550092
 

123-1516: SENSOR & MTG GP-POSITION

123-1516 SENSOR & MTG GP-POSITION
PART OF 390-4355 BOOM AR-OFFSET
i05186125 SEBP7155
1231516 SENSOR & MTG GP-POSITION Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4171 M [2] BOLT (M6X1X12-MM)  
2. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
3. 120-0044 [1] SENSOR AS-POSITION  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
4. 9X-2328 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
5. 123-1913 [1] LEVER  
6. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
7. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP71550093
 

444-9890: SENSOR & MTG GP-POSITION

444-9890 SENSOR & MTG GP-POSITION -BOOM
PART OF 390-4355 BOOM AR-OFFSET
i05871213 SEBP7155
4449890 SENSOR & MTG GP-POSITION Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-0044 [1] SENSOR AS-POSITION (BOOM)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 433-5593 [1] BRACKET  
3. 433-5596 [1] LEVER AS  
4. 8T-4171 M [2] BOLT (M6X1X12-MM)  
5. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
7. 9X-2328 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
8. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP71550094
 

387-9085: STARTING MOTOR GP-ELECTRIC

387-9085 STARTING MOTOR GP-ELECTRIC
PART OF 450-3205 ENGINE AR-PRIMARY
i04776857 SEBP7155
3879085 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 383-0196 [1] NUT-HEX  
2. 383-0201 [1] NUT-FLANGE  
3. 383-0207 [1] WASHER  
4. 385-5044 [1] STARTING MOTOR AS  
5. 387-9893 [1] BOLT-FLANGE HEAD  
6. 387-9894 [1] STUD  
 

#SEBP71550095
 

319-4420: SWITCH GP-ROTARY

319-4420 SWITCH GP-ROTARY -THROTTLE POSITION
PART OF 444-9973 WIRING GP-CONSOLE
i04655678 SEBP7155
3194420 SWITCH GP-ROTARY Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
2. 9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
3. 8T-8737 [1] PLUG-SEAL  
4. 7Y-5458 M [1] NUT (M12X1-THD)  
5. 7Y-5464 [1] WASHER (12.2X15.4X0.5-MM THK)  
6. 106-0210 [1] SEAL  
  M   METRIC PART
 

#SEBP71550096
 

444-9989: WIRING GP-AUXILIARY CONTROL

444-9989 WIRING GP-AUXILIARY CONTROL -MAIN CONTROL VALVE
PART OF 439-2999 CHASSIS AR
i05873082 SEBP7155
4449989 WIRING GP-AUXILIARY CONTROL Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 204-1611 [2] STRAP (DUAL)  
3. 266-7379 [2] STRAP-CABLE  
4. 349-1812 [1] SWITCH AS-PRESSURE (PILOT OIL)  
  3J-1907 [1] SEAL-O-RING  
  108-7516 [1] FITTING  
  349-1756 [1] SWITCH AS-PRESSURE (PILOT OIL)  
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
5. 452-2940 Y [1] HARNESS AS-CHASSIS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP71550097
 

444-9976: WIRING GP-CAB

444-9976 WIRING GP-CAB
PART OF 439-3008 OPERATOR AR
i05873110 SEBP7155
4449976 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7K-1181 [15] STRAP-CABLE  
3. 111-4837 [2] CLIP  
4. 163-6795 [4] STRAP-CABLE  
5. 204-1611 [1] STRAP (DUAL)  
6. 298-0663 [1] CLIP (LADDER)  
7. 298-4948 [1] RELAY AS (12-VOLT)(COMPRESSOR CLUTCH)  
7A. 298-4948 [3] RELAY AS (12-VOLT)(BLOWER FAN)  
8. 324-5771 [1] SOCKET-AUXILIARY POWER (12-VOLT)  
9. 369-0153 [1] WIRE AS (14-GA)  
10. 376-8858 [1] MONITOR GP-OPERATOR (CAB CONSOLE)  
  452-2961 [1] SOFTWARE GP-MONITOR  
11. 394-9322 [1] GROMMET  
12. 452-2938 Y [1] HARNESS AS-CAB  
13. 095-0735 M [14] SCREW-MACHINE (M5X0.8X8-MM)  
14. 115-1615 [2] RELAY AS (12-VOLT)(WIPER)  
14A. 115-1615 [2] RELAY AS (12-VOLT)(WIPER MOTOR)  
14B. 115-1615 [1] RELAY AS (12-VOLT)(WIPER SWITCH)  
15. 155-7585 [2] RESISTOR AS  
16. 5C-9553 M [4] BOLT (M6X1X16-MM)  
17. 7X-2619 M [4] BOLT (M6X1X10-MM)  
18. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
20. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
21. 8T-4171 M [4] BOLT (M6X1X12-MM)  
22. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
23. 8T-4970 M [5] BOLT (M6X1X14-MM)  
24. 9X-8256 [17] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP71550098
 

415-8910: WIRING GP-COMMUNICATION

415-8910 WIRING GP-COMMUNICATION
PART OF 394-9358, 438-4898 CONTROL AR-COMMUNICATION
AN ATTACHMENT
i05180784 SEBP7155
4158910 WIRING GP-COMMUNICATION Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 416-4250 [1] WIRE AS  
 

#SEBP71550099
 

444-9973: WIRING GP-CONSOLE

444-9973 WIRING GP-CONSOLE -RH, LH
PART OF 439-3008 OPERATOR AR
i05873111 SEBP7155
4449973 WIRING GP-CONSOLE Parts scheme 4449973 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 308E2 SR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 4I-3038 [3] WASHER (3.3X8X0.5-MM THK)  
3. 7K-1181 [15] STRAP-CABLE  
4. 7Y-8165 [1] GROMMET  
5. 8X-5804 [1] STRAP AS-GROUND  
6. 109-2356 [4] PLUG  
7. 110-6109 [1] KNOB-CONTROL (FLOW CONTROL SWITCH)  
8. 111-4836 [3] CLIP  
9. 116-7471 [1] PULLER-MINIFUSE  
10. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(INTERLOCK)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
11. 158-7802 [1] SWITCH AS-ROCKER (WINDOW WASHER, WIPER)  
  111-7899 [1] GASKET  
12. 163-6795 [3] STRAP-CABLE  
13. 204-1611 [2] STRAP (DUAL)  
14. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
15. 266-6935 [1] RELAY AS (12-VOLT)(MAIN)  
15A. 266-6935 [1] RELAY AS (12-VOLT)(AIR CONDITIONER)  
16. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
17. 276-2332 [1] SWITCH AS-TOGGLE (LOCAL/REMOTE THROTTLE)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 298-0663 [1] CLIP (LADDER)  
19. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
20. 322-8964 [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
21. 362-3225 [2] SWITCH AS-PRESSURE (PILOT, TRAVEL)  
    (EACH INCLUDES)
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
22. 364-3882 [1] BUZZER (12-VOLT)  
23. 366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & SERVICE METER FILM)
24. 370-5354 [1] PLATE AS  
25. 381-9233 [1] BRACKET AS  
26. 390-3001 Y [1] HARNESS AS-SWITCH (BOOM SWING, HYD LOCKOUT, START)  
27. 390-7968 [1] STRIP AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
28. 394-9311 [1] BRACKET AS  
  7T-1099 [1] LINK  
  9R-3761 M [1] BOSS (M10X1.5X51-MM)  
  121-1029 [1] CLIP  
29. 394-9313 [1] BRACKET  
30. 394-9318 [1] BRACKET  
31. 452-2937 Y [1] HARNESS AS-WIRING (CONSOLE)  
32. 093-2064 [2] GROMMET  
33. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
34. 116-0118 [1] CLIP  
35. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
36. 3J-1907 [2] SEAL-O-RING  
37. 6V-9671 M [3] SCREW-MACHINE (M3X0.5X12-MM)  
38. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
39. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
40. 8T-2658 M [3] LOCKNUT (M3X0.5-THD)  
41. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
43. 8T-4191 M [7] BOLT (M10X1.5X16-MM)  
44. 8T-4970 M [4] BOLT (M6X1X14-MM)  
45. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
46. 103-2543 E SEAL (3-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 308E2 SR :

MOUNTING GP-ELECTRONIC CONTROL
385-1277 MOUNTING GP-ELECTRONIC CONTROL
LIGHTING GP-FLOOD
430-6438 LIGHTING GP-FLOOD
LIGHTING GP-CAB
394-9323 LIGHTING GP-CAB
LAMP GP-FLOOD
233-0099 LAMP GP-FLOOD
416-7616 LAMP GP-DOME
438-4899 INSTALLATION GP-SECURITY
394-9359 INSTALLATION GP-SECURITY
INSTALLATION GP-SECURITY
394-9331 INSTALLATION GP-SECURITY
SENSOR & MOUNTING GP
123-1515 SENSOR & MOUNTING GP
SENSOR & MTG GP-POSITION
123-1516 SENSOR & MTG GP-POSITION
SENSOR & MTG GP-POSITION
444-9890 SENSOR & MTG GP-POSITION
STARTING MOTOR GP-ELECTRIC
387-9085 STARTING MOTOR GP-ELECTRIC
SWITCH GP-ROTARY
319-4420 SWITCH GP-ROTARY
WIRING GP-AUXILIARY CONTROL
444-9989 WIRING GP-AUXILIARY CONTROL
WIRING GP-CAB
444-9976 WIRING GP-CAB
WIRING GP-COMMUNICATION
415-8910 WIRING GP-COMMUNICATION
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.