374-6262 PUMP GP-FUEL INJECTION S/N CJG1-UP PART OF 350-3754 PUMP GP-FUEL INJECTION TH406C TELEHANDLER

FUEL SYSTEM

PUMP GP-FUEL INJECTION

0. 374-6262 PUMP GP-FU

TANK GP-FUEL

1. 452-2092 TANK & MTG
2. 452-2093 TANK GP-FU

ELECTRICAL AND STARTING SYSTEM

ALARM GP

3. 425-0296 ALARM GP

ALTERNATOR GP-CHARGING

4. 330-4296 ALTERNATOR
5. 350-1486 ALTERNATOR
6. 361-7141 ALTERNATOR

BATTERY GP

7. 441-9703 BATTERY &
8. 441-9703 BATTERY &
9. 450-7855 BATTERY &
0. INFORMATION

TELEHANDLER TH406C TELEHANDLER GAT
TH406C Telehandler GAT00258-UP (MACHINE) SEBP7165 TH406C GAT (2013)

FUEL SYSTEM

PUMP GP-FUEL INJECTION

320-0680 INJECTOR GP-FUEL

368-9611 INJECTOR GP-FUEL

375-1395 INJECTOR GP-FUEL

304-8755 PUMP GP-FUEL INJECTION

324-0532 PUMP GP-FUEL INJECTION

350-3754 PUMP GP-FUEL INJECTION

374-6262 PUMP GP-FUEL INJECTION

#SEBP71650230

374-6262: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

374-6262 PUMP GP-FUEL INJECTION
S/N CJG1-UP
PART OF 350-3754 PUMP GP-FUEL INJECTION

i05772790 SEBP7165

3746262 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	390-3122	[1]	PUMP AS-FUEL INJECTION
2.	386-2096	[1]	GEAR
3.	550-8863	[1]	LINE AS-FUEL
4.	390-2615	[1]	RAIL GP-FUEL
4A.		[1]	SENSOR (PRESSURE)
4B.	396-3724	[1]	VALVE AS-RELIEF
4C.	396-3745	[1]	SEAL
5.	387-9141	[1]	LINE AS-FUEL
			(INCLUDES 4 FUEL LINES)
6.	6I-0291 M	[3]	NUT (M8X1.25-THD)
7.	7W-2632	[3]	WASHER (8.5X16.8X1.6-MM THK)

			AVAILABLE REPAIR KIT(S):
	388-1289	[1]	KIT-FUEL SYSTEM PARTS
			(INCLUDES CAPS)
	M		METRIC PART

#SEBP71650231

452-2092: TANK & MTG GP-FUEL

TANK & MTG GP-FUEL

452-2092 TANK & MTG GP-FUEL
S/N RCH150-UP; GAT258-UP
PART OF 435-3737, 452-6403 CHASSIS AR

i05691612 SEBP7165

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5C-9553 M	[3]	BOLT (M6X1X16-MM)
2.	8T-6870 M	[4]	BOLT (M8X1.25X70-MM)
3.	344-5674 M	[4]	NUT (M8X1.25-THD)
4.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
5.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
6.	224-3105	[4]	WASHER (9X55X5-MM THK)
7.	224-8472	[4]	WASHER (25X55X4-MM THK)
8.	314-5513	[1]	COVER AS
9.	314-5519	[4]	SPACER (10X22X42-MM THK)
10.	452-2093 Y	[1]	TANK GP-FUEL
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71650232

452-2093: TANK GP-FUEL

TANK GP-FUEL

452-2093 TANK GP-FUEL
S/N RCH150-UP; GAT258-UP
150-LITER(39.6-GALLON)
PART OF 452-2092 TANK & MTG GP-FUEL

i05703529 SEBP7165

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4195 M	[6]	BOLT (M10X1.5X30-MM)
2.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
3.	416-9502	[1]	CRADLE AS-TANK
4.	452-2094	[1]	TANK GP-FUEL
	304-3885	[1]	CAP-FUEL (FILLER)
	148-8410	[1]	PLUG AS
	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
	2M-9780	[1]	SEAL-O-RING
	304-8239	[1]	TANK-FUEL
	M		METRIC PART

#SEBP71650233

425-0296: ALARM GP

ALARM GP

425-0296 ALARM GP
S/N RCH150-UP; GAT258-UP
PART OF 435-3737, 452-6403 CHASSIS AR
ALSO FIELD INSTALLATION

i05690373 SEBP7165

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
2.	5W-1417	[2]	WASHER (6.4X18X1.6-MM THK)
3.	425-0294	[1]	ALARM
	M		METRIC PART

#SEBP71650234

330-4296: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

330-4296 ALTERNATOR GP-CHARGING
S/N 4441-UP
PART OF 384-6663 ENGINE AR-PRIMARY

i05730778 SEBP7165

3304296 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6B-0933	[1]	SPACER (10.31X19.05X6.35-MM THK)
2.	6I-0260 M	[1]	BOLT (M8X1.25X25-MM)
3.	6I-0454 M	[1]	BOLT (M10X1.5X70-MM)
4.	175-7141 M	[1]	NUT-HEX FLANGE (M10X1.5-THD)
5.	067-6366	[1]	WASHER
6.	359-9666 M	[1]	BOLT-FLANGE HEAD (M8X1.25X130-MM)
7.	6V-9189 M	[1]	LOCKNUT (M8X1.25-THD)
8.	140-8783 M	[2]	BOLT (M10X1.5X45-MM)
9.	383-2557	[1]	ALTERNATOR (12-VOLT, 120-AMPERE)
10.	228-7391	[1]	PULLEY-ALTERNATOR
11.	453-3595	[1]	BRACKET
12.	233-9531	[1]	LEVER
13.	132-8848	[1]	WASHER
	M		METRIC PART

#SEBP71650235

350-1486: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

350-1486 ALTERNATOR GP-CHARGING
S/N CJG1-UP
PART OF 376-2072 ENGINE AR-PRIMARY

i05722395 SEBP7165

3501486 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	361-7141 Y	[1]	ALTERNATOR GP-CHARGING
	Y		SEPARATE ILLUSTRATION

#SEBP71650236

361-7141: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

361-7141 ALTERNATOR GP-CHARGING
S/N CJG1-UP
PART OF 350-1486 ALTERNATOR GP-CHARGING

i05773242 SEBP7165

3617141 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	152-6578	[1]	NUT
2.	385-9093	[1]	BRACKET
3.	389-2722	[1]	BOLT
4.	389-2854	[1]	NUT
5.	389-2857	[2]	WASHER
6.	390-2384	[1]	ALTERNATOR
7.	390-2387	[1]	TENSIONER
8.	393-0383	[1]	BOLT
9.	6I-0654 M	[2]	BOLT (M10X1.5X25-MM)
10.	100-4461 M	[2]	BOLT (M10X1.5X50-MM)
11.	6I-0594 M	[1]	NUT (M10X1.5-THD)
	M		METRIC PART

#SEBP71650237

441-9703: BATTERY & WIRING GP

BATTERY & WIRING GP

441-9703 BATTERY & WIRING GP
S/N RCH150-UP; GAT258-UP
Type 1
FOR USE WITH 99 HP ENGINE ONLY
AN ATTACHMENT

i05684550 SEBP7165

4419703 BATTERY & WIRING GP Parts scheme

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
2.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
3.	309-9184 M	[2]	LOCKNUT (M8X1.25-THD)
4.	338-8862	[2]	WASHER (8.4X23X4-MM THK)
5.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
6.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
7.	178-3336 M	[2]	NUT-HEX FLANGE (M8X1.25-THD)
8.	038-9317	[1]	TREAD-NONSKID
9.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
10.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
11.	8I-4641	[1]	CABLE AS
12.	9X-3404	[1]	BATTERY GP (12-VOLT, MAINTENANCE FREE, WET)
13.	323-7372	[2]	ROD
14.	338-3553	[1]	BRACKET AS
15.	424-5609	[1]	CABLE AS
16.	424-5612	[1]	CABLE AS
17.	444-0111	[1]	CABLE AS
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71650238

441-9703: BATTERY & WIRING GP

BATTERY & WIRING GP

441-9703 BATTERY & WIRING GP
S/N RCH150-UP; GAT258-UP
Type 2
FOR USE WITH 99 HP ENGINE ONLY
AN ATTACHMENT

i07623187 SEBP7165

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
2.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
3.	3T-0852 M	[2]	LOCKNUT (M8X1.25-THD)
4.	338-8862	[2]	WASHER (8.4X23X4-MM THK)
5.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
6.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
7.	178-3336 M	[2]	NUT-HEX FLANGE (M8X1.25-THD)
8.	038-9317	[1]	TREAD-NONSKID
9.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
10.	484-9819 C	[1]	SWITCH (DISCONNECT)
11.	8I-4641	[1]	CABLE AS
12.	9X-3404	[1]	BATTERY GP (12-VOLT, MAINTENANCE FREE, WET)
	461-5232	[6]	CAP AS-FILLER
13.	323-7372	[2]	ROD
14.	338-3553	[1]	BRACKET AS
15.	424-5609	[1]	CABLE AS
16.	424-5612	[1]	CABLE AS
17.	444-0111	[1]	CABLE AS
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP71650239

450-7855: BATTERY & WIRING GP

BATTERY & WIRING GP

450-7855 BATTERY & WIRING GP
S/N RCH150-UP; GAT258-UP
FOR USE WITH 126 HP & 142 HP ENGINE ONLY
AN ATTACHMENT

i05684702 SEBP7165

4507855 BATTERY & WIRING GP Parts scheme

For full view, you need register

Parts for your TH406C TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
2.	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
3.	3T-0852 M	[2]	LOCKNUT (M8X1.25-THD)
4.	338-8862	[2]	WASHER (8.4X23X4-MM THK)
5.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	178-3336 M	[2]	NUT-HEX FLANGE (M8X1.25-THD)
9.	038-9317	[1]	TREAD-NONSKID
10.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
11.	484-9819	[1]	SWITCH (DISCONNECT)
12.	8I-4641	[1]	CABLE AS
13.	9X-3404	[1]	BATTERY GP (12-VOLT, MAINTENANCE FREE, WET)
	461-5232	[6]	CAP AS-FILLER
14.	323-7372	[2]	ROD
15.	338-3553	[1]	BRACKET AS
16.	424-5609	[1]	CABLE AS (POSITIVE)
17.	424-5612	[1]	CABLE AS (NEGATIVE)
18.	444-0111	[1]	CABLE AS (EARTH)
	M		METRIC PART

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Engine News

New Tooling for the New Air in Fuel and Fuel Pressure Test Procedures {1261, 1274, 1288, 1714}
2006/11/20

Leakage of the Fuel Injector {1251, 1290}
2007/10/01

Support for Fuel Injection Pumps {1251}
2008/07/14

Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
2010/04/30

Improved Fuel Injection Pump Timing Tool {1251}
2009/01/26

New Pressure Relief Valve {1251, 1715}
2008/12/01

Diagnostic Process for Fuel Rail Pressure Sensor {127A, 1439}
2009/08/31

Improved Servicing is Available for the Fuel Injection Pump for C6.6 and C4.4 Engines {1251, 1256, 1290, 1714}
2010/11/22

Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251}
2010/01/08

Electronic Control Module on C6.6 and C4.4 Engines {1251, 1290}
2010/01/14

New Fuel Injection Pump for Certain C6.6 and C4.4 Engines {1251, 1290}
2010/03/31

New Fuel Manifold (Rail) for C6.6 and C4.4 Engines {1288}
2010/12/13

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

High Leak-off of the Electronic Unit Injector on C6.6 and C4.4 Engines {1251, 1290}
High Leak-off of the Electronic Unit Injector on C6.6 and C4.4 Engines {1251, 1290}

Removal and Installation of Electronic Unit Injectors{1290}
Removal and Installation of Electronic Unit Injectors{1290}

Diagnostic Process for Fuel Rail Pressure Sensor{1718}
Diagnostic Process for Fuel Rail Pressure Sensor{1718}

Servicing the Outlet Check Plugs on the Fuel Injection Pump on C6.6 and C4.4 Engines{1251, 1290}
Servicing the Outlet Check Plugs on the Fuel Injection Pump on C6.6 and C4.4 Engines{1251, 1290}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Fuel Injection Pump
C4.4 Industrial Engine

Fuel Injection Nozzles
C4.4 Industrial Engine

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES

Service Letter-Asia

Systems Operation

Fuel Injection
C4.4 Industrial Engine

Information Release Memo

PRODUCT LINE EXPANSION: REMAN COMMON RAIL FUEL PUMPS FOR CERTAIN TIER III C4.2, C4.4, C6.4, C6.6 Engines
PRODUCT LINE EXPANSION: REMAN COMMON RAIL FUEL PUMPS FOR CERTAIN TIER III C4.2, C4.4, C6.4, C6.6 Engines

PRODUCT LINE INTRODUCTION: REMAN COMMON RAIL FUEL INJECTORS FOR CERTAIN C4.4, C6.6 TIER III ENGINES AND CERTAIN SMALL AND MEDIUM EXCAVATORS
PRODUCT LINE INTRODUCTION: REMAN COMMON RAIL FUEL INJECTORS FOR CERTAIN C4.4, C6.6 TIER III ENGINES AND CERTAIN SMALL AND MEDIUM EXCAVATORS

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN C6.6 ENGINES

Testing and Adjusting

Fuel Injection Timing - Check
C4.4 Industrial Engine

Troubleshooting

CID 0001 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0001 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0002 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0002 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0003 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0003 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0004 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0004 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

Injector Solenoid Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 1779 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 1779 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

Injector Trim File
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

Fuel Rail Pump Solenoid - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0005 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0005 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0005 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0005 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0006 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0006 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0006 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0006 FMI 07
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

Injector Data Incorrect - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0001 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0001 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0002 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0003 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0004 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0002 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0003 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

CID 0004 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines

Disassembly and Assembly

Electronic Unit Injector - Remove
C4.4 Industrial Engine

Electronic Unit Injector - Install
C4.4 Industrial Engine

Fuel Injection Pump - Install
C4.4 Industrial Engine

Fuel Injection Pump - Remove
C4.4 Industrial Engine

Fuel Injection Pump Gear - Install
C4.4 Industrial Engine

Fuel Injection Pump Gear - Remove
C4.4 Industrial Engine

Service Magazine

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog TH406C :

350-3754 PUMP GP-FUEL INJECTION

324-0532 PUMP GP-FUEL INJECTION

304-8755 PUMP GP-FUEL INJECTION

350-1817 LINES GP-FUEL FILTER

311-2271 LINES GP-FUEL FILTER

455-5443 LINES GP-FUEL

452-0234 LINES GP-FUEL

449-7181 LINES GP-FUEL

452-2092 TANK & MTG GP-FUEL

452-2093 TANK GP-FUEL

425-0296 ALARM GP

330-4296 ALTERNATOR GP-CHARGING

350-1486 ALTERNATOR GP-CHARGING

361-7141 ALTERNATOR GP-CHARGING

441-9703 BATTERY & WIRING GP

Truck sale:

82,000

Caterpillar TH406C, Construction
- telehandler
GENTRAC
Guatemala

76,000

Caterpillar TH406C, Construction
- telehandler
WHAYNE SUPPLY COMPANY

86,800

Caterpillar TH406C CB, Construction
- telehandler
WHEELER MACHINERY CO.

115,000

Caterpillar TH406C, Construction
- telehandler
WYOMING MACHINERY