510-7627 WIRING GP-COMMUNICATION -PRODUCT LINK 241 PART OF 509-8485 INSTALLATION AR-COMMUNICATION AN ATTACHMENT 303E CR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 510-7627 WIRING GP-
1. 444-9943 WIRING GP-
2. 444-9947 WIRING GP-
3. 444-9947 WIRING GP-
4. 471-5112 WIRING GP-
5. 471-5115 WIRING GP-
6. 422-2911 WIRING GP-
7. 444-9951 WIRING GP-
8. 471-5119 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

9. 280-3097 DRIVE GP-F
0. INFORMATION

MINI HYD EXCAVATOR 303E CR MINI HYD EXCAVATOR HHM
303E CR Mini Hydraulic Excavator HHM00001-UP (MACHINE) POWERED BY C1.3 Engine SEBP7174 303E CR HHM (2014)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

505-8129 WIRING GP-COMMUNICATION

510-7627 WIRING GP-COMMUNICATION

444-9943 WIRING GP-CONSOLE

444-9947 WIRING GP-CONSOLE

#SEBP71740100

510-7627: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

510-7627 WIRING GP-COMMUNICATION -PRODUCT LINK 241
PART OF 509-8485 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i06804037 SEBP7174

5107627 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	419-3911	[1]	LAMP GP-INDICATOR (12/24-VOLT, AMBER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	505-8121 Y	[1]	HARNESS AS-CONTROL
	Y		SEPARATE ILLUSTRATION

#SEBP71740101

444-9943: WIRING GP-CONSOLE

WIRING GP-CONSOLE

444-9943 WIRING GP-CONSOLE -CANOPY
PART OF 449-0430 CANOPY AR
AN ATTACHMENT

i05754840 SEBP7174

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[8]	STRAP-CABLE
2.	7K-1181	[24]	STRAP-CABLE
3.	8X-5804	[1]	STRAP AS-GROUND
4.	109-2356	[2]	PLUG
5.	116-7471	[1]	PULLER-MINIFUSE
6.	140-9378	[10]	RELAY AS (12-VOLT)
7.	163-6795	[2]	STRAP-CABLE
8.	204-1611	[1]	STRAP (DUAL)
9.	266-1404	[1]	SWITCH AS-ROCKER (12-VOLT)(LIGHT)
	111-7899	[1]	GASKET
10.	266-3807	[1]	MONITOR GP-OPERATOR
11.	266-6935	[1]	RELAY AS (12-VOLT)
12.	267-7058	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
13.	306-9039	[1]	COVER AS-PROTECTION
14.	322-8964	[1]	SWITCH AS-START (KEY)(ENGINE)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
15.	356-8806	[1]	PLATE AS
16.	366-4622	[1]	KIT-SERVICE METER (32-VOLT DC)
			(INCLUDE SREVICE METER, NUT & SERVICE METER FILM)
17.	452-2976 Y	[1]	HARNESS AS-CONSOLE
18.	452-2977	[2]	CONTROL AS
19.	095-0742 M	[2]	SCREW-MACHINE (M6X1X16-MM)
20.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
21.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
22.	7I-2272 M	[1]	BOLT (M5X0.8X12-MM)
23.	8M-2773	[1]	CLIP (LOOP)
24.	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
25.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
27.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
28.	103-2543 E		SEAL (3-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71740102

444-9947: WIRING GP-CONSOLE

WIRING GP-CONSOLE

444-9947 WIRING GP-CONSOLE -CAB
PART OF 449-0431 INSTALLATION AR-MACHINE
Type 1
AN ATTACHMENT

i05754426 SEBP7174

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[8]	STRAP-CABLE
2.	7K-1181	[26]	STRAP-CABLE
3.	8X-5804	[1]	STRAP AS-GROUND
4.	109-2356	[3]	PLUG
5.	116-7471	[1]	PULLER-MINIFUSE
6.	140-9378	[10]	RELAY AS (12-VOLT)(CONSOLE)
7.	163-6795	[2]	STRAP-CABLE
8.	204-1611	[2]	STRAP (DUAL)
9.	266-1404	[1]	SWITCH AS-ROCKER (12-VOLT)(LIGHT)
	111-7899	[1]	GASKET
10.	266-3807	[1]	MONITOR GP-OPERATOR
11.	266-6935	[1]	RELAY AS (12-VOLT)(MAIN)
11A.	266-6935	[1]	RELAY AS (12-VOLT)(ACCELERATOR)
12.	267-7058	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
13.	322-8964	[1]	SWITCH AS-START (KEY)(ENGINE)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
14.	356-8806	[1]	PLATE AS
15.	366-4622	[1]	KIT-SERVICE METER (32-VOLT DC)
			(INCLUDES METER GP & FILM-SERVICE METER)
16.	452-2977	[2]	CONTROL AS
17.	452-2979 Y	[1]	HARNESS AS-CAB (MAIN)
18.	095-0742 M	[2]	SCREW-MACHINE (M6X1X16-MM)
19.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
20.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
21.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
22.	8M-2773	[1]	CLIP (LOOP)
23.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
24.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
26.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
27.	103-2543 E		SEAL (3-CM)
28.	458-0660 Y	[1]	HARNESS AS-WINDOW WIPER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71740103

444-9947: WIRING GP-CONSOLE

WIRING GP-CONSOLE

444-9947 WIRING GP-CONSOLE -CAB
PART OF 449-0431 INSTALLATION AR-MACHINE
Type 2
AN ATTACHMENT

i07262885 SEBP7174

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[7]	STRAP-CABLE
2.	7K-1181 C	[25]	STRAP-CABLE
3.	8X-5804	[1]	STRAP AS-GROUND
4.	109-2356	[3]	PLUG
5.	116-7471	[1]	PULLER-MINIFUSE
6.	140-9378	[10]	RELAY AS (12-VOLT)(CONSOLE)
7.	163-6795	[2]	STRAP-CABLE
8.	204-1611	[2]	STRAP (DUAL)
9.	266-1404	[1]	SWITCH AS-ROCKER (12-VOLT)(LIGHT)
	111-7899	[1]	GASKET
10.	266-3807	[1]	MONITOR GP-OPERATOR
11.	266-6935	[1]	RELAY AS (12-VOLT)(MAIN)
11A.	266-6935	[1]	RELAY AS (12-VOLT)(ACCELERATOR)
12.	267-7058	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
13.	322-8964	[1]	SWITCH AS-START (KEY)(ENGINE)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
14.	356-8806	[1]	PLATE AS
15.	366-4622	[1]	KIT-SERVICE METER (32-VOLT DC)
			(INCLUDES METER GP & FILM-SERVICE METER)
16.	452-2977	[2]	CONTROL AS
17.	458-0661 CY	[1]	HARNESS AS-CAB
18.	095-0742 M	[2]	SCREW-MACHINE (M6X1X16-MM)
19.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
20.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
21.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
22.	8M-2773	[1]	CLIP (LOOP)
23.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
24.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
26.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
27.	103-2543 E		SEAL (3-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71740104

471-5112: WIRING GP-CONSOLE

WIRING GP-CONSOLE

471-5112 WIRING GP-CONSOLE -CANOPY
PART OF 449-0430 CANOPY AR
AN ATTACHMENT

i06936250 SEBP7174

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[5]	STRAP-CABLE
2.	7K-1181 C	[34]	STRAP-CABLE
3.	8X-5804	[1]	STRAP AS-GROUND
4.	109-2356	[3]	PLUG
5.	116-7471	[1]	PULLER-MINIFUSE
6.	140-9378	[10]	RELAY AS (12-VOLT)
7.	163-6795	[2]	STRAP-CABLE
8.	235-8966 C	[5]	BASE-MOUNTING
9.	266-1404	[1]	SWITCH AS-ROCKER (12-VOLT)(LIGHT)
	111-7899	[1]	GASKET
10.	266-3807	[1]	MONITOR GP-OPERATOR
11.	266-6935	[1]	RELAY AS (12-VOLT)
12.	267-7058	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
13.	306-9039	[1]	COVER AS-PROTECTION
14.	322-8964	[1]	SWITCH AS-START (KEY)(ENGINE)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
15.	356-8806	[1]	PLATE AS
16.	366-4622	[1]	KIT-SERVICE METER (32-VOLT DC)
			(INCLUDES SERVICE METER & FILM)
17.	419-3911 C	[1]	LAMP GP-INDICATOR (12/24-VOLT, AMBER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
18.	452-2977	[2]	CONTROL AS
19.	479-4323	[1]	BRACKET AS
20.	479-4324 C	[1]	BRACKET AS
21.	479-4338 CY	[1]	HARNESS AS-CONSOLE
22.	095-0742 M	[2]	SCREW-MACHINE (M6X1X16-MM)
23.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
24.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
25.	204-1611	[1]	STRAP (DUAL)
26.	4I-3038 C	[3]	WASHER (3.3X8X0.5-MM THK)
27.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
28.	6V-9671 CM	[3]	SCREW-MACHINE (M3X0.5X12-MM)
29.	7I-2272 M	[1]	BOLT (M5X0.8X12-MM)
30.	8M-2773	[1]	CLIP (LOOP)
31.	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
32.	8T-2658 CM	[3]	LOCKNUT (M3X0.5-THD)
33.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
34.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
35.	8T-4189 CM	[2]	BOLT (M8X1.25X20-MM)
36.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
37.	8T-4224 C	[2]	WASHER-HARD (8.8X16X2-MM THK)
38.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
39.	103-2543 E		SEAL (3-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71740105

471-5115: WIRING GP-CONSOLE

WIRING GP-CONSOLE

471-5115 WIRING GP-CONSOLE -CAB
PART OF 449-0431 INSTALLATION AR-MACHINE
AN ATTACHMENT

i06219329 SEBP7174

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[34]	STRAP-CABLE
3.	8X-5804	[1]	STRAP AS-GROUND
4.	109-2356	[3]	PLUG
5.	116-7471	[1]	PULLER-MINIFUSE
6.	140-9378	[10]	RELAY AS (12-VOLT)(TRAVEL SPEED)
7.	163-6795	[2]	STRAP-CABLE
8.	235-8966	[3]	BASE-MOUNTING
9.	266-1404	[1]	SWITCH AS-ROCKER (12-VOLT)(LIGHT)
	111-7899	[1]	GASKET
10.	266-3807	[1]	MONITOR GP-OPERATOR
11.	266-6935	[1]	RELAY AS (12-VOLT)(MAIN)
11A.	266-6935	[1]	RELAY AS (12-VOLT)(ACCELERATOR)
12.	267-7058	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	322-8964	[1]	SWITCH AS-START (KEY)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
14.	356-8806	[1]	PLATE AS
15.	366-4622	[1]	KIT-SERVICE METER (32-VOLT DC)
			(INCLUDES SERVICE METER & FILM)
16.	419-3911	[1]	LAMP GP-INDICATOR (12/24-VOLT, AMBER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
17.	452-2977	[2]	CONTROL AS
18.	479-4323	[1]	BRACKET AS
19.	479-4337 Y	[1]	HARNESS AS-CONSOLE
20.	095-0742 M	[2]	SCREW-MACHINE (M6X1X16-MM)
21.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
22.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
23.	204-1611	[3]	STRAP (DUAL)
24.	4I-3038	[3]	WASHER (3.3X8X0.5-MM THK)
25.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
26.	6V-9671 M	[3]	SCREW-MACHINE (M3X0.5X12-MM)
27.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
28.	8M-2773	[1]	CLIP (LOOP)
29.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
30.	8T-2658 M	[3]	LOCKNUT (M3X0.5-THD)
31.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
32.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
33.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
34.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
35.	103-2543 E		SEAL (3-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71740106

422-2911: WIRING GP-LIGHTING

WIRING GP-LIGHTING

422-2911 WIRING GP-LIGHTING -BOOM
PART OF 449-0427 BOOM AR
ALSO AN ATTACHMENT

i05306090 SEBP7174

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	204-1611	[5]	STRAP (DUAL)
4.	422-2912 Y	[1]	HARNESS AS-LIGHTING (FRONT)
5.	4K-8302	[2]	CLIP (LOOP)
6.	5P-9297	[2]	CLIP (LOOP)
7.	7X-7729	[1]	WASHER (11X25X3-MM THK)
8.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
10.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71740107

444-9951: WIRING GP-LIGHTING

WIRING GP-LIGHTING

444-9951 WIRING GP-LIGHTING -WARNING BEACON, POWER RECEP
PART OF 449-0430 CANOPY AR
AN ATTACHMENT

i05754481 SEBP7174

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	207-1686	[1]	SOCKET
3.	266-7379	[1]	STRAP-CABLE
4.	444-9952 Y	[1]	HARNESS AS-LIGHTING
	Y		SEPARATE ILLUSTRATION

#SEBP71740108

471-5119: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

471-5119 WIRING GP-QUICK COUPLER
PART OF 473-4920 CONTROL AR-COUPLER
AN ATTACHMENT

i06293701 SEBP7174

4715119 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[6]	STRAP-CABLE
2.	7K-1181 C	[22]	STRAP-CABLE
3.	266-7379	[1]	STRAP-CABLE
4.	359-5048	[1]	SWITCH AS-ROCKER (QUICK COUPLER MAIN)
5.	359-5049	[1]	SWITCH AS-ROCKER (QUICK COUPLER LOCK)
			(EACH SWITCH AS INCLUDES)
	111-7899	[1]	GASKET
6.	361-1160	[1]	RECEPTACLE GP-CONNECTOR (PIN GRABBER COUPLER)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	471-5127	[1]	HARNESS AS-QUICK COUPLER (FRAME)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
8.	471-5128	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
	7T-1099	[1]	LINK
9.	479-4320 CY	[1]	HARNESS AS-QUICK COUPLER (PLATFORM)
10.	471-5139	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
11.	471-5141	[1]	BRACKET
12.	471-5142	[1]	PLATE
13.	6V-7357 M	[2]	BOLT (M6X1X25-MM)
14.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
16.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
17.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
19.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP71740109

280-3097: DRIVE GP-FINAL

DRIVE GP-FINAL

280-3097 DRIVE GP-FINAL
PART OF 295-9370 DRIVE GP-FINAL
ALSO AN ATTACHMENT

i04019566 SEBP7174

For full view, you need register

Parts for your 303E CR MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	192-1134	[2]	SEAL
2.	150-0909	[1]	BEARING
3.	280-3098	[1]	NUT
4.	150-0810	[2]	PLUG
5.	192-0633	[132]	BALL
6.	096-5971	[2]	PLUG
7.	150-0811	[4]	GEAR
8.	150-0812	[4]	BEARING AS-NEEDLE
9.	150-0813	[4]	RACE-INNER
10.	150-0814	[4]	WASHER
11.	143-2343	[1]	PLATE
12.	143-2344	[4]	SCREW
13.	150-0815	[1]	GEAR
14.	280-3100	[1]	HOLDER
15.	280-3101	[3]	GEAR
16.	150-0818	[3]	BEARING
17.	150-0819	[3]	RACE
18.	280-3102	[1]	GEAR
19.	280-3103	[1]	COVER
20.	095-1725	[1]	SEAL-O-RING
21.	143-2358	[1]	WIRE
22.	279-4706	[3]	PLUG
23.	3J-1907	[3]	SEAL-O-RING
24.	143-2346	[1]	RING

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery - Recycle
303E CR Mini Hydraulic Excavator

Battery or Battery Cable - Inspect/Replace
303E CR Mini Hydraulic Excavator

Fuses - Replace
303E CR Mini Hydraulic Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

Service Letter-Australia

Service Letter-CFEL

Service Letter-Americas

Technical Information Bulletin

Rework Procedure for the Chassis Harness Assembly on Certain 303E Mini Hydraulic Excavators {1408}
Rework Procedure for the Chassis Harness Assembly on Certain 303E Mini Hydraulic Excavators {1408}

Service Hour Meter Malfunctions on Mini Hydraulic Excavators Equipped with a Canopy {1408, 7301}
Service Hour Meter Malfunctions on Mini Hydraulic Excavators Equipped with a Canopy {1408, 7301}

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C1.3 Engines for Caterpillar Built Machines

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

An Updated Battery Wiring Group is Now Used on 303E Mini Hydraulic Excavators {1402, 1408}
An Updated Battery Wiring Group is Now Used on 303E Mini Hydraulic Excavators {1402, 1408}

The Battery Wiring Group Is Now Updated on Certain 303E CR Mini Hydraulic Excavators {1401, 1402, 1408}
The Battery Wiring Group Is Now Updated on Certain 303E CR Mini Hydraulic Excavators {1401, 1402, 1408}

An Improved Service Meter Kit Is Now Used on Certain Mini Hydraulic Excavators {1408, 7301}
An Improved Service Meter Kit Is Now Used on Certain Mini Hydraulic Excavators {1408, 7301}

A New Service Meter Kit Is Now Used On Certain Mini Hydraulic Excavators {1408, 7301}
A New Service Meter Kit Is Now Used On Certain Mini Hydraulic Excavators {1408, 7301}

Caterpillar Parts SIS Catalog 303E CR :

505-8129 WIRING GP-COMMUNICATION

505-8128 WIRING GP-COMMUNICATION

479-4314 WIRING GP-COMMUNICATION

479-4313 WIRING GP-COMMUNICATION

439-7737 STARTING MOTOR GP-ELECTRIC

439-7753 SENSOR GP-PRESSURE

505-6727 RADIO GP-COMMUNICATION

444-9943 WIRING GP-CONSOLE

444-9947 WIRING GP-CONSOLE

471-5112 WIRING GP-CONSOLE

471-5115 WIRING GP-CONSOLE

422-2911 WIRING GP-LIGHTING

444-9951 WIRING GP-LIGHTING

471-5119 WIRING GP-QUICK COUPLER