SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSFUEL SYSTEM
FILTER GP-FUELSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSTOOLS
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
#SEBP71820440
452-0825: FILM GP
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 219-0302 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| (ON RH B POST, ON MACHINE LH FACE CENTERED BELOW CAB SPLIT BOLT & FLANGE ON POST) | ||||
| 224-7830 | [1] | FILM-WARNING (HIGH PRESSURE, READ OMM, U.S.) | ||
| (ON MACHINE RH SIDE ON TOP SURFACE ON BRAKE ACCUMULATOR PLATFORM IN FRONT OF ACCUMULATOR SO IT CAN BE SEEN WHEN CAB | ||||
| SKIRT IS REMOVED) | ||||
| 224-8945 | [1] | FILM-WARNING (DO NOT USE ETHER, U.S.) | ||
| (ON RH SIDE OF ENGINE COMPARTMENT HOOD NEAR PRE-AIR CLEANER FILM ORIENT TO BE READ WHILE STANDING ON PLATFORM) | ||||
| 225-0313 | [2] | FILM-WARNING (JUMP START, READ OMM, U.S.) | ||
| (ON INSIDE OF BATTERY BOX ON FRONT SIDE PLATE NEAR TOP. FOR SECOND FILM USE AS REQUIRED ON HEAVY DUTY BATTERY OPTION & | ||||
| LOCATE INSIDE OF BATTERY BOX ON FRONT SIDE PLATE NEAR TOP) | ||||
| 225-4256 | [1] | FILM-WARNING (HOT FLUID UNDER PRESSURE, U.S.) | ||
| (ON UNDERSIDE OF SHUNT TANK ACCESS DOOR. ORIENT TO BE READ FROM PLATFORM) | ||||
| 237-6257 | [2] | FILM-WARNING (FAN) | ||
| (ONE FILM INSIDE OF ENCLOSURE ON MACHINE LH SIDE UNDER ELECTRICAL BREAKER PLATE ON RADIATOR STRUCTURE. PLACE OTHER FILM | ||||
| IN SAME LOCATION ON MACHINE RH SIDE ON RADIATOR STRUCTURE) | ||||
| 243-1936 | [1] | FILM-WARNING (SEAT BELT) | ||
| (ON LH A-POST INSIDE OF CAB ON MACHINE RIGHT FACE CENTERED BETWEEN CAB SPLIT BOLT & DOOR LATCH WELDMENT) | ||||
| 269-0193 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) | ||
| (CENTER ON ROPS STRUCTURE CROSS TUBE UNDER FRONT GLASS & ABOVE FRONT CAB SKIRT ON RH & LH SIDE OF MACHINE) | ||||
| 367-4214 | [1] | FILM-WARNING (ARTICULATION LOCK, CRUSH HAZAR) | ||
| (CENTER FILM ABOVE ARTICULATION LOCK ON ENGINE END FRAME) | ||||
| 385-7288 | [1] | FILM-WARNING (UNIVERSAL, READ OMM) | ||
| (INSIDE CAB ON LH A POST MACHINE REAR FACE 15-MM BELOW CAB SPLIT LINE) | ||||
| 385-7290 | [1] | FILM-WARNING (ROTATING SHAFT, READ OMM) | ||
| (INSIDE OF ENCLOSURE ON MACHINE LH SIDE ON SOUND WALL POST SO IT CAN BE READ WITH ENCLOSURE DOOR OPEN) | ||||
#SEBP71820441
474-3293: KIT-FILTER SERVICE
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 350-8742 | [1] | BELT-SERPENTINE (ALTERNATOR) | ||
| 6V-7419 | [1] | BLADE AS-WIPER (700-MM) | ||
| 8Y-4615 | [1] | BLADE AS-WIPER (400-MM) | ||
| 391-3764 | [2] | FILTER AS-WATER SEP & FUEL | ||
| 256-7902 | [4] | FILTER ELEMENT AS-AIR (PRIMARY) | ||
| 256-7903 | [4] | FILTER ELEMENT AS-AIR (SECONDARY) | ||
| 421-5481 | [1] | FILTER ELEMENT AS-OIL (HYDRAULIC) | ||
| 353-5058 | [4] | FILTER ELEMENT-CAB AIR (RECIRCULATION) | ||
| 365-7606 | [4] | FILTER ELEMENT-CAB AIR (FRESH AIR) | ||
| 360-8960 | [4] | FILTER ELEMENT-FUEL (PRIMARY) | ||
| 462-1171 | [2] | FILTER-ENGINE OIL | ||
| 273-5711 | [2] | FILTER-FUMES DISPOSAL | ||
| 144-6691 | [1] | FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC) |
#SEBP71820442
378-8167: PLATE & FILM GP
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS#SEBP71820443
452-0824: PLATE & FILM GP
452-0824 PLATE & FILM GP
PART OF 452-0801 CHASSIS AR
PART OF 452-0801 CHASSIS AR
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-6989 | [1] | PLATE-SERIAL NUMBER (MACHINE) | ||
| (CENTER ON LH SIDE OF NON ENGINE END FRAME TOWER PLATE 20-MM ABOVE SERIAL NUMBER) | ||||
| 225-4150 | [1] | PLATE-SERVICE INFORMATION (MACHINE) | ||
| (ADHERED TO COMBO PIN PLATE) | ||||
| 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | ||
| (PLACE BOLT & WASHER IN BOSS ON FRAME TO LH OF BATTERS BOX WITH NATO PLUG) | ||||
| 8T-4179 M | [10] | BOLT (M12X1.75X20-MM) | ||
| (PLACE BOLT & WASHERS IN 6 THREADED M12 HOLES ON REAR OF MACHINE & 2 HOLES EACH SIDE OF CARRIAGE) | ||||
| 193-5914 B | [15] | PLUG | ||
| (TO PLUG HOLES ON CARRIAGE & IN 6 BLOCKS ON RIGHT HAND SIDE OF EEF, REMOVE PLUGS FROM OPTIONAL CTWT BOSSES ON EEF) | ||||
| 193-5918 B | [8] | PLUG | ||
| (TO PLUG 8 HOLES ON REAR OF MACHINE) | ||||
| 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | ||
| (PLACE BOLT & WASHER IN BOSS ON FRAME TO LH OF BATTERS BOX WITH NATO PLUG) | ||||
| 8T-4223 | WASHER-HARD (13.5X25.5X3-MM THK) | |||
| (PLACE BOLT & WASHERS IN 6 THREADED M12 HOLES ON REAR OF MACHINE & 2 HOLES EACH SIDE OF CARRIAGE) | ||||
| 300-9915 | [1] | FILM-IDENTIFICATION (HYDRAULIC OIL) | ||
| (BACK OF CAB ALIGNED WITH LH SIDE PANEL & CENTER WITH SITE GAGE SO IT CAN BE SEEN FROM GROUND) | ||||
| 367-2757 | [1] | FILM-IDENTIFICATION (GREASE POINTS) | ||
| (NEAR GREASE BLOCK IN HITCH AREA ON ENGINE END FRAME & 400-MM DOWN FROM TOP FRAME RAIL)) | ||||
| 134-7258 | [1] | FILM-INFORMATION (EXTENDED LIFE COOLANT) | ||
| (UNDERSIDE OF SHUNT TANK ACCESS DOOR & ORIENT TO BE READ FROM LH SIDE OF MACHINE) | ||||
| 146-6747 | [2] | FILM-INFORMATION (24-VOLT) | ||
| (INSIDE OF BATTERY BOX ON FRONT SIDE PLATE NEAR TOP & FOR SECOND FILM USE AS REQUIRED WITH OPTIONAL BATTERY BOX) | ||||
| 366-0425 | [1] | FILM-INFORMATION (MACHINE) | ||
| (INSIDE CAB DOOR ON LOWER GLASS ON RIGHT SIDE SO IT CAN BE READ FROM GROUND WITH DOOR CLOSED) | ||||
| 366-8550 | [1] | FILM-INFORMATION (BELT ROUTING) | ||
| (INSIDE OF ENCLOSURE ON MACHINE RH SIDE ON SOUND WALL SERVICE PLATE) | ||||
| 309-6899 | [1] | FILM-INSTRUCTION (BATTERY) | ||
| (CENTER OF FRONT GLASS VISIBLE FROM SEATED POSITION) | ||||
| 366-8546 | [1] | FILM-INSTRUCTION (DOOR CLOSURE, READ OMM) | ||
| (ON RH ENGINE ACCESS FOLD DOWN PANEL ON INSIDE OF PANEL ALIGNED WITH HINGES CENTERED ON PANEL) | ||||
| 385-7287 | [1] | FILM-INSTRUCTION (START AID, READ OMM) | ||
| (ON INSIDE WALL OF A POST 300-MM BELOW CAB SPLIT LINE CENTERED ON A POST) | ||||
| 469-3522 | [1] | FILM-WARNING (ROPS, FOPS) | ||
| (INSIDE OF CAB ON B POST FACING SEAT CENTERED BETWEEN PLASTIC & CAB SPLIT BOLT) | ||||
| 236-7230 | [1] | TAG-WARNING (STEERING FRAME LOCK) | ||
| (ATTACH TO STEERING WHEEL) | ||||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP71820444
465-9560: PLATE & FILM GP
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-4158 | [8] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 2. | 257-3399 | [1] | PLATE-INFORMATION (PIN) | |
| 3. | 258-9999 | [4] | FILM-IDENTIFICATION (LIFT EYE LOCATION) | |
| 4. | 263-4836 | [6] | FILM-IDENTIFICATION (TIE-DOWN) | |
| 5. | 316-4869 | [2] | FILM-IDENTIFICATION (CAT) | |
| 6. | [2] | STENCIL | ||
| 7. | 421-1156 | [1] | FILM-IDENTIFICATION (CAT) | |
| 8. | [1] | PLATE-LUBE (REMOTE) | ||
| 9. | [1] | FILM-NOTICE (RETRIEVAL) | ||
| 10. | [1] | FILM-WARNING (CRUSH HAZARD, READ OMM) | ||
| 486-9814 F | [4] | CAP-VALVE | ||
| F | NOT SHOWN | |||
#SEBP71820445
471-7957: PLATE & FILM GP
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-4158 | [8] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 2. | 257-3399 | [1] | PLATE-INFORMATION (PIN) | |
| 3. | 258-9999 | [4] | FILM-IDENTIFICATION (LIFT EYE LOCATION) | |
| 4. | 263-4836 | [6] | FILM-IDENTIFICATION (TIE-DOWN) | |
| 5. | 316-4869 | [2] | FILM-IDENTIFICATION (CAT) | |
| 6. | 421-1156 | [1] | FILM-IDENTIFICATION (CAT) | |
| 7. | [1] | FILM-WARNING (CRUSH HAZARD, READ OMM) | ||
| 8. | [2] | STENCIL | ||
| 9. | [1] | PLATE-LUBE (REMOTE) | ||
| 10. | [1] | FILM-NOTICE (RETRIEVAL) | ||
| 486-9814 F | [4] | CAP-VALVE | ||
| F | NOT SHOWN | |||
#SEBP71820446
502-4860: PLATE & FILM GP
502-4860 PLATE & FILM GP
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS#SEBP71820447
465-9555: TOOL GP-HAND
465-9555 TOOL GP-HAND
PART OF 465-9553 CONVERSION AR-MACHINE, 465-9554 CONVERSION GP-MACHINE
AN ATTACHMENT
PART OF 465-9553 CONVERSION AR-MACHINE, 465-9554 CONVERSION GP-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 211-0136 | [1] | BAG-TOOL | ||
| 236-4810 | [1] | BLOCK AS | ||
| 8T-0672 M | [1] | BOLT (M24X3X160-MM) | ||
| 8T-5092 M | [4] | BOLT (M12X1.75X150-MM) | ||
| 8T-4196 JM | [2] | BOLT (M10X1.5X35-MM) | ||
| 268-8749 | [1] | CAP-CONNECTOR | ||
| 374-7466 | [1] | CAP-SEAL | ||
| 480-5852 | [2] | CLIP | ||
| 237-3827 | [1] | CONTROL GP-REMOTE (CAB REMOVAL) | ||
| 416-7158 | [1] | COVER-CONNECTOR | ||
| 459-7520 | [9] | GUIDE | ||
| 447-8683 | [1] | HANDLE AS | ||
| 155-2274 | [6] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-4133 JM | [2] | NUT (M10X1.5-THD) | ||
| 447-2397 | [2] | PIN-SNAP | ||
| 476-4905 J | [1] | PLATE | ||
| 217-3021 | [4] | SPACER (14X28.6.61-MM THK) | ||
| 356-5102 | [2] | STRAP AS | ||
| 8T-4821 | [4] | WASHER (13.5X40X3-MM THK) | ||
| 8T-4121 J | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 465-2401 | [1] | WRENCH-TORQUE | ||
| J | ITEMS USED TO LOWER HEIGHT OF WINCH WHEN TRAVELING BY GIC RAIL | |||
| M | METRIC PART | |||
Information:
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
Operation and Maintenance Manual
Service Magazine
Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}
