ELECTRICAL AND STARTING SYSTEM
LIGHTING GPOPERATOR STATION
MONITOR GPELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-MACHINESTARTING AID GP
ELECTRONICS GP-POWER TRAIN
LIGHTING GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
#SEBP71830370
452-0853: KIT-LIGHTING
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 350-1235 | [1] | SWITCH AS-ROCKER (WORK LIGHTS) | |
| 111-7899 | [1] | GASKET | ||
| 2. | 566-3376 C | [2] | LAMP GP-FLOOD (ROOF) | |
| 3. | 566-3377 | [2] | LAMP AS-FLOOD (9 TO 32-VOLT)(WORK LIGHTS) | |
| (EACH INCLUDES) | ||||
| 3T-0852 M | [2] | LOCKNUT (M8X1.25-THD) | ||
| 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | ||
| 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | ||
| 4. | 451-0675 | [1] | SWITCH AS-ROCKER (AUXILIARY WORK LIGHTS) | |
| 111-7899 | [1] | GASKET | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP71830371
463-3795: KIT-LIGHTING
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 7K-1181 | [9] | STRAP-CABLE | |
| 3. | 034-1432 | [1] | STRAP-CABLE | |
| 4. | 471-4233 | [1] | BRACKET | |
| 5. | 105-8034 | [1] | SWITCH AS-LIMIT (ENGINE SERVICE LIGHT) | |
| 6. | 132-5789 | [4] | CLIP (LADDER) | |
| 7. | 200-6345 | [1] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 8. | 206-2423 | [1] | SADDLE-MOUNTING | |
| 9. | 316-9351 | [4] | MOUNTING-CABLE TIE | |
| 10. | 333-7383 | [1] | LAMP GP (24-VOLT)(REAR LH) | |
| 10A. | 333-7383 | [2] | LAMP GP (24-VOLT)(REAR RH) | |
| 10B. | 333-7383 | [1] | LAMP GP (24-VOLT)(FRONT, RH) | |
| (EACH LAMP GP INCLUDES) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 11. | 377-5611 | [3] | BRACKET | |
| 12. | 377-5612 | [1] | BRACKET AS | |
| 13. | 377-5626 Y | [1] | HARNESS AS-ENGINE (LIGHT) | |
| 14. | 4P-7581 | [2] | CLIP (LADDER) | |
| 15. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71830372
374-5861: KIT-LIGHTING GUARD
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 397-8605 | [1] | GUARD AS | |
| 2. | 397-8606 | [1] | GUARD AS | |
| 3. | 397-8607 | [1] | PLATE AS | |
| 4. | 397-8608 | [1] | PLATE AS | |
| (EACH PLATE AS INCLUDES) | ||||
| 159-9541 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 193-9723 | [2] | WASHER (11X42X2.5-MM THK) | |
| 6. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
#SEBP71830373
374-5862: KIT-LIGHTING GUARD
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 377-4115 | [1] | PLATE (RH) | |
| 2. | 377-4116 | [1] | PLATE (LH) | |
| 3. | 7D-1649 | [2] | WASHER-HARD (13.5X32X5-MM THK) | |
| 4. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 5. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 6. | 8T-4222 | [4] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 7. | 8T-4226 | [6] | WASHER-PLATED (10.5X45X3-MM THK) | |
| M | METRIC PART | |||
#SEBP71830374
512-9616: KIT-LIGHTING GUARD
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 512-9614 | [1] | PLATE | |
| 2. | 512-9615 | [1] | PLATE | |
| 3. | 7D-1649 | [2] | WASHER-HARD (13.5X32X5-MM THK) | |
| 4. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 5. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 6. | 8T-4222 B | [4] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 7. | 8T-4226 | [2] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 8. | 8T-4226 B | [6] | WASHER-PLATED (10.5X45X3-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP71830375
463-3801: KIT-OBJECT DETECTION
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [15] | STRAP-CABLE | |
| 2. | 377-5617 | [1] | BRACKET AS | |
| 3. | 377-5658 | [2] | COVER (RADAR) | |
| 4. | 377-5659 | [2] | COVER (MOUNT) | |
| 5. | 377-5661 Y | [1] | HARNESS AS-CAB (OBJECT DETECTION) | |
| 6. | 377-5662 | [2] | BRACKET | |
| 7. | 377-5663 | [1] | BRACKET AS | |
| 159-9539 M | [8] | NUT-WELD (M6X1-THD) | ||
| 165-8718 M | [4] | NUT-WELD (M4X0.7-THD) | ||
| 8. | 397-2994 | [2] | SENSOR GP-OBJECT DETECTION (RADAR) | |
| (EACH INCLUDES) | ||||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3139 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 9. | 4P-8134 | [2] | CLIP (LADDER) | |
| 10. | 5C-9553 M | [8] | BOLT (M6X1X16-MM) | |
| 11. | 6V-9499 | [8] | WASHER-HARD (4.3X7X0.8-MM THK) | |
| 12. | 7M-3361 | [2] | GROMMET | |
| 13. | 8T-3998 M | [8] | BOLT (M4X0.7X12-MM) | |
| 14. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 15. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 16. | 485-7992 | [1] | CIRCUIT BREAKER AS (7.5-AMPERE) | |
| 17. | 494-7962 | [1] | FILM-IDENTIFICATION (FUSE PANEL) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71830376
370-7004: KIT-SECURITY
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-5607 | [4] | MOUNT-ISOLATION | |
| 2. | 8C-5608 | [2] | SPACER (6.5X9.5X25.4-MM THK) | |
| 3. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 4. | 285-3231 J | [2] | KEY AS-ELECTRONIC (SECURITY) | |
| 5. | 206-5208 | [1] | COIL AS (EXCITER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 205-8257 | [1] | COIL AS (EXCITER) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.4-M) | |||
| 6. | 213-6065 Y | [1] | HARNESS AS-CONTROL (SECURITY) | |
| 7. | 219-6607 | [2] | FILM-INFORMATION (SECURITY SYSTEM) | |
| 8. | 486-0923 Y | [1] | ELECTRONICS GP-MACHINE (MACHINE SECURITY SYSTEM) | |
| 9. | 345-0401 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | |
| 10. | 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | |
| 11. | 3S-2093 | [1] | STRAP-CABLE | |
| 12. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 13. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 14. | 9X-2480 M | [2] | BOLT (M6X1X45-MM) | |
| 15. | 5C-8311 | [2] | RING | |
| 16. | 109-8895 | [2] | PLATE-IDENTIFICATION (LOGGING SKID) | |
| D | ORDER BY THE METER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71830377
374-5854: KIT-STARTING AID
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 129-8087 | [1] | SPACER (13.9X17.1X14-MM THK) | |
| 2. | 351-9257 Y | [1] | STARTING AID GP-ETHER | |
| 3. | 132-5789 | [1] | CLIP (LADDER) | |
| 4. | 3S-2093 | [5] | STRAP-CABLE | |
| 5. | 5P-4116 | [5] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 6. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 7. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP71830378
471-7009: KIT-VARIABLE SHIFT CONTROL
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [18] | STRAP-CABLE | |
| 2. | 273-9189 | [1] | CONTROL GP-TRANSMISSION (SHUTTLE) | |
| 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 471-7010 | [1] | BRACKET | |
| 4. | 471-7011 | [2] | PLATE | |
| 5. | 471-7012 | [1] | HARNESS AS-OPERATOR CONTROLS | |
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE) | ||||
| 194-5226 | [8] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [8] | WIRE AS (14-GA) | ||
| 6. | 096-5969 M | [2] | BOLT-SOCKET HEAD (M5X0.8X25-MM) | |
| 7. | 101-1167 M | [4] | SCREW-BUTTON HEAD (M5X0.8X14-MM) | |
| 8. | 5C-2874 M | [6] | NUT (M5X0.8-THD) | |
| 9. | 8T-0328 | [6] | WASHER-HARD (5.5X10X1-MM THK) | |
| M | METRIC PART | |||
#SEBP71830379
324-3740: LAMP GP-FLOOD
324-3740 LAMP GP-FLOOD -HID
S/N LTE1-UP
24-VOLT
PART OF 374-5869 KIT-LIGHTING, 372-1928 LIGHTING GP-FLOOD
AN ATTACHMENT
S/N LTE1-UP
24-VOLT
PART OF 374-5869 KIT-LIGHTING, 372-1928 LIGHTING GP-FLOOD
AN ATTACHMENT
For full view, you need register
Parts for your 926M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 352-8986 | [1] | LENS (HID)(ROUND) | |
| 2. | 290-8160 | [1] | LAMP (24-VOLT, HID) | |
| 3. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 9X-4244 M | [2] | SCREW-SPECIAL (M4X1.79X25-MM) | |
| 5. | 317-7685 | [1] | BRACKET | |
| 6. | 319-7384 | [1] | BALLAST AS (24-VOLT, 35-WATT, HID) | |
| 7. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 8. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 9. | 6V-9189 M | [1] | LOCKNUT (M8X1.25-THD) | |
| M | METRIC PART | |||
