AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

377-6967 STARTING MOTOR GP-ELECTRIC PART OF 389-2341 STARTING MOTOR GP-ELECTRIC ALSO AN ATTACHMENT 272D2


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
SWITCH GP
WIRING GP

SKID STEER LOADER 272D2 SKID STEER LOADER BL2
 272D2 & 272D2 XHP Skid Steer Loader BL200001-UP (MACHINE) POWERED BY C3.8 Engine SEBP7194 272D2 BL2   (2015)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
377-6967 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
389-2341 STARTING MOTOR GP-ELECTRIC
 

#SEBP71940200
 

377-6967: STARTING MOTOR GP-ELECTRIC

377-6967 STARTING MOTOR GP-ELECTRIC
PART OF 389-2341 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT
i04779089 SEBP7194
3776967 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-5258 [1] HOUSING AS  
2. 389-5259 [1] BEARING  
3. 389-5260 [1] SHAFT AS-CLUTCH  
  389-5261 [1] SHAFT AS-GEAR  
3A. 389-5265 [4] GEAR AS  
3B. 389-5262 [1] WASHER SET  
3C. 389-5263 [1] GEAR AS  
3D. 389-5264 [1] CLUTCH  
4. 389-5266 [1] LEVER AS  
5. 389-5267 [1] GEAR AS  
5A. 389-5268 [1] STOP AS  
6. 389-5269 [1] SWITCH AS-MAGNETIC  
7. 389-5270 [1] SCREW-SET  
8. 389-5271 [1] BALL  
9. 389-5272 [1] PACKING SET  
10. 389-5273 [1] ARMATURE AS  
11. 389-5274 [1] BEARING  
12. 389-5275 [1] YOKE AS  
13. 389-5276 [1] BRUSH AS  
13A. 389-5277 [4] SPRING  
13B. 389-5278 [2] BRUSH  
14. 389-5279 [1] BRACKET AS  
15. 389-5280 [1] BOLT-SET  
 

#SEBP71940201
 

389-2341: STARTING MOTOR GP-ELECTRIC

389-2341 STARTING MOTOR GP-ELECTRIC
12-VOLT, 3-KW
PART OF 416-6089, 416-6090 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i04779029 SEBP7194
3892341 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 377-6967 Y [1] STARTING MOTOR GP-ELECTRIC  
2. 387-9893 [1] BOLT-FLANGE HEAD  
3. 452-2016 [1] NUT  
4. 387-9894 [1] STUD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP71940202
 

7N-0718: SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
6-VOLT TO 24-VOLT
PART OF 441-4810, 441-4811 BATTERY & WIRING GP, 484-8211 KIT-LIGHTING
ALSO AN ATTACHMENT
i00089702 SEBP7194
7N0718 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 2H-3922 [2] LOCKWASHER  
4. 264-3617 [2] LOCKWASHER  
5. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
 

#SEBP71940203
 

117-9080: SWITCH GP-MAGNETIC

117-9080 SWITCH GP-MAGNETIC
12-VOLT
PART OF 451-8378 KIT-HYDRAULIC OIL COOLER, 441-4800 WIRING GP-PLATFORM
ALSO AN ATTACHMENT
i04762428 SEBP7194
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  175-2344 Y [1] SWITCH GP-MAGNETIC  
    -OR-
  175-2345 Y [1] SWITCH GP-MAGNETIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP71940204
 

175-2344: SWITCH GP-MAGNETIC

175-2344 SWITCH GP-MAGNETIC
12-VOLT
PART OF 117-9080 SWITCH GP-MAGNETIC
ALSO AN ATTACHMENT
i04764063 SEBP7194
1752344 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 9X-1813 E SLEEVE (16-CM)  
4. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP71940205
 

175-2345: SWITCH GP-MAGNETIC

175-2345 SWITCH GP-MAGNETIC
12-VOLT
PART OF 117-9080 SWITCH GP-MAGNETIC
ALSO AN ATTACHMENT
i04764064 SEBP7194
1752345 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 E SLEEVE (16-CM)  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 1H-3338 [2] LOCKWASHER  
5. 3B-4504 [2] LOCKWASHER  
6. 5C-2890 M [2] NUT (M6X1-THD)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP71940206
 

441-4798: WIRING GP-AIR CONDITIONER

441-4798 WIRING GP-AIR CONDITIONER
S/N BL21-659; MD21-491
PART OF 435-8964 AIR CONDITIONER AR
ALSO AN ATTACHMENT
i06104339 SEBP7194
4414798 WIRING GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 7K-1181 [6] STRAP-CABLE  
3. 266-0299 [1] SWITCH AS-ROCKER (AIR CONDITIONER)  
  111-7899 [1] GASKET  
4. 356-6113 Y [1] CONTROL GP-AIR & TEMPERATURE  
5. 378-1024 Y [1] HARNESS AS-HEATER & AIR COND (FRONT)  
6. 441-4799 Y [1] HARNESS AS-HEATER & AIR COND (REAR)  
7. 115-1615 [1] RELAY AS (12-VOLT)(AIR CONDITIONER COMPRESSOR)  
8. 132-5789 [1] CLIP (LADDER)  
9. 266-3314 M [3] BOLT-FLANGE HEAD (M6X1X20.5-MM)  
10. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [1] NUT (M10X1.5-THD)  
12. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP71940207
 

441-4798: WIRING GP-AIR CONDITIONER

441-4798 WIRING GP-AIR CONDITIONER
S/N BL2660-UP; MD2492-UP
PART OF 435-8964 AIR CONDITIONER AR
ALSO AN ATTACHMENT
i06824017 SEBP7194
4414798 WIRING GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 7K-1181 [6] STRAP-CABLE  
3. 266-0299 [1] SWITCH AS-ROCKER (AIR CONDITIONER)  
  111-7899 [1] GASKET  
4. 356-6113 Y [1] CONTROL GP-AIR & TEMPERATURE  
5. 506-8176 CY [1] HARNESS AS-HEATER & AIR COND (FRONT)  
6. 441-4799 Y [1] HARNESS AS-HEATER & AIR COND (REAR)  
7. 115-1615 [1] RELAY AS (12-VOLT)(AIR CONDITIONER COMPRESSOR)  
8. 132-5789 [1] CLIP (LADDER)  
9. 266-3314 M [3] BOLT-FLANGE HEAD (M6X1X20.5-MM)  
10. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [1] NUT (M10X1.5-THD)  
12. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP71940208
 

539-9167: WIRING GP-BLADE

539-9167 WIRING GP-BLADE
PART OF 539-9210 BLADE AR
AN ATTACHMENT
i07544948 SEBP7194
5399167 WIRING GP-BLADE Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. [1] PLATE  
3. 7K-1181 [6] STRAP-CABLE  
4. 155-0576 [8] MOUNT-ISOLATION  
5. 160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
6. 501-1450 [1] SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT)  
7. 526-7587 Y [1] ELECTRONICS GP-IMPLEMENT  
8. 344-5674 M [7] NUT (M8X1.25-THD)  
9. [1] PLATE  
10. Y [1] HARNESS AS-CONTROL  
11. Y [1] HARNESS AS-CONTROL (BLADE)  
12. Y [1] HARNESS AS-CONTROL  
13. 5P-4116 [13] WASHER-HARD (8.8X20.5X2-MM THK)  
14. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
15. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
16. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
17. 8T-6912 M [7] BOLT (M8X1.25X50-MM)  
18. 9N-0869 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP71940209
 

441-4805: WIRING GP-CAB

441-4805 WIRING GP-CAB
S/N BL21-668; MD21-494
PART OF 435-8754 CAB AR
ALSO AN ATTACHMENT
i06080139 SEBP7194
4414805 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 272D2 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [29] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [11] STRAP-CABLE  
4. 146-9439 [2] RELAY AS (12-VOLT)(FUSE BLOCK)  
5. 258-4135 Y [2] RELAY GP (12-VOLT)(MAIN POWER)  
6. 258-4143 [1] BAR-BUS  
7. 258-4178 [1] FLANGE-MOUNTING  
8. 258-4196 [1] WIRE AS (10-GA)  
9. 290-5562 [1] MOUNT (DUAL SWIVEL)  
10. 356-6067 [1] PLATE AS  
  159-9539 M [3] NUT-WELD (M6X1-THD)  
11. 361-6395 Y [1] ELECTRONICS GP-MACHINE  
12. 422-5562 Y [1] HARNESS AS-WIRING (SEAT)  
13. 441-4794 [1] FILM-IDENTIFICATION (POWER DISTRIBUTION)  
14. 441-4806 Y [1] HARNESS AS-CAB  
15. 457-2324 [1] RELAY AS (12-VOLT)(FUSE)  
  267-5211 [1] SEAL  
  267-5213 [1] COVER  
  274-9872 [2] FUSE (30-AMPERE)  
16. 110-2028 [4] SCREW-PAN HEAD (10-14X0.75-IN)  
17. 1A-8912 [10] WASHER (6.7X12.7X1.6-MM THK)  
18. 258-3727 [6] SCREW-TRUSS HEAD (12-14X0.69-IN)  
19. 282-2628 M [4] BOLT (M8X1.25X30-MM)  
21. 350-5720 [2] CLIP (LADDER)  
22. 374-7464 B [2] CAP-SEAL  
23. 374-7466 B [2] CAP-SEAL  
24. 374-7467 B [1] CAP-SEAL  
25. 4P-8134 [2] CLIP (LADDER)  
26. 5C-2890 M [12] NUT (M6X1-THD)  
27. 5C-7261 M [3] NUT (M8X1.25-THD)  
28. 5C-9553 M [2] BOLT (M6X1X16-MM)  
29. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
30. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
31. 7P-1695 [2] WASHER (10.5X19X3-MM THK)  
32. 7X-2534 M [3] BOLT (M6X1X50-MM)  
33. 8F-7242 [9] WASHER (8.7X15.9X1.6-MM THK)  
34. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
35. 8T-4133 M [2] NUT (M10X1.5-THD)  
36. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Technical Information Bulletin
Troubleshooting the C3.3B and C3.8 Engine Electronic Control Modules (ECM) Prior to Replacing the Engine ECM {1450, 1901}
Troubleshooting the C3.3B and C3.8 Engine Electronic Control Modules (ECM) Prior to Replacing the Engine ECM {1450, 1901}
Testing and Adjusting
Electric Starting System - Test
C3.8 Engines for Caterpillar Built Machines
Troubleshooting
Starting System
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Machine Electronic Control System
Disassembly and Assembly
Electric Starting Motor - Remove and Install
299D2 and 299D2 XHP Compact Track Loaders, 297D2 and 297D2 XHP Multi Terrain Loaders and 272D2 and 272D2 XHP Skid Steer Loaders Engine Supplement
Service Magazine
Improved Alternator and Starting System Test and Adjust Procedures Are Available For Certain Machines Equipped With C1.3, C1.7, C2.4, C2.6, C3.3B, and C3.8 Engines {0374, 1405, 1450, 1453}
Improved Alternator and Starting System Test and Adjust Procedures Are Available For Certain Machines Equipped With C1.3, C1.7, C2.4, C2.6, C3.3B, and C3.8 Engines {0374, 1405, 1450, 1453}

Caterpillar Parts SIS Catalog 272D2 :

345-5234 SOFTWARE GP-MACHINE
SENSOR GP-SPEED
262-3764 SENSOR GP-SPEED
SENSOR GP-POSITION
266-2337 SENSOR GP-POSITION
SENSOR & MTG GP-POSITION
435-8738 SENSOR & MTG GP-POSITION
RELAY GP
258-4135 RELAY GP
RADIO GP-COMMUNICATION
505-6727 RADIO GP-COMMUNICATION
MOUNTING GP-CONTROL
416-6007 MOUNTING GP-CONTROL
LIGHTING GP-STOP & TAIL
356-6082 LIGHTING GP-STOP & TAIL
STARTING MOTOR GP-ELECTRIC
389-2341 STARTING MOTOR GP-ELECTRIC
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
117-9080 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
175-2344 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
175-2345 SWITCH GP-MAGNETIC
WIRING GP-AIR CONDITIONER
441-4798 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
441-4798 WIRING GP-AIR CONDITIONER
WIRING GP-BLADE
539-9167 WIRING GP-BLADE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.