OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
COOLER GPCYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP72010850
378-6856: CONTROL AR-HYDRAULIC
378-6856 CONTROL AR-HYDRAULIC -PIN PULLER
S/N NZ81-UP
PART OF 382-7691 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
S/N NZ81-UP
PART OF 382-7691 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 120-5820 | [1] | PLATE | |
| 2. | 120-5821 | [1] | PLATE AS | |
| 3. | 188-6140 Y | [1] | VALVE & MTG GP-CONTROL (HYDRAULIC PIN PULLER) | |
| 4. | 212-4888 | [1] | TUBE AS | |
| 5. | 212-4890 | [1] | TUBE AS | |
| 6. | 222-7889 | [1] | SWITCH AS-ROCKER (HYDRAULIC PIN PULLER) | |
| 7. | 246-4311 | [1] | GUARD (SWITCH) | |
| 8. | 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | |
| 9. | 148-8336 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 6V-8636 | [1] | CONNECTOR | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 10. | 148-8378 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 6V-8724 | [1] | ELBOW | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 11. | 148-8407 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 12. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 13. | 4P-8134 | [1] | CLIP (LADDER) | |
| 14. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 15. | 7K-1181 | [1] | STRAP-CABLE | |
| 16. | 7X-0290 | [2] | BOLT (3/8-16X3.5-IN) | |
| 17. | 7X-0578 | [4] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 18. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72010851
387-0435: CONTROL AR-HYDRAULIC
387-0435 CONTROL AR-HYDRAULIC -SINGLE TILT
S/N REX1-UP
CANNOT BE USED WITH CONTROL AR-DUAL TILT
AN ATTACHMENT
S/N REX1-UP
CANNOT BE USED WITH CONTROL AR-DUAL TILT
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP72010852
457-5022: CONTROL AR-HYDRAULIC
457-5022 CONTROL AR-HYDRAULIC -SINGLE TILT
S/N REX1-UP
FOR USE WITH GRADE CONTROL
CANNOT BE USED WITH CONTROL AR-DUAL TILT
AN ATTACHMENT
S/N REX1-UP
FOR USE WITH GRADE CONTROL
CANNOT BE USED WITH CONTROL AR-DUAL TILT
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 386-1355 Y | [1] | CONTROL & MTG GP-JOYSTICK | ||
| 387-0437 Y | [1] | LINES GP-TILT CYLINDER | ||
| 351-9845 | [1] | COVER | ||
| 193-9055 M | [2] | SCREW-HEX FLANGE (M4X1.79X17-MM) | ||
| 364-3719 | [1] | FILM-IDENTIFICATION (JOYSTICK)(AUTOMATIC BLADE) | ||
| (ON UPPER RH CONSOLE TO LEFT OF SWITCH PANEL) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72010853
382-7697: CONTROL AR-HYDRAULIC IMPLEMENT
382-7697 CONTROL AR-HYDRAULIC IMPLEMENT -RIPPER
S/N REX1-UP
AN ATTACHMENT
S/N REX1-UP
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 378-6886 Y | [1] | ADAPTER GP-FAST FILL FUEL | ||
| 353-6043 Y | [1] | CONTROL AR-HYDRAULIC (RIPPER) | ||
| 378-6867 Y | [1] | LINES GP-PUMP | ||
| 378-6865 Y | [1] | VALVE & MTG GP-MAIN CONTROL | ||
| 8T-9398 | [4] | BOLT (3/4-10X1.75-IN) | ||
| 210-8372 | [1] | GUARD AS | ||
| 228-6089 | [1] | PLUG (ROCKER SWITCH) | ||
| 8T-4994 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72010854
382-7790: CONTROL AR-HYDRAULIC IMPLEMENT
382-7790 CONTROL AR-HYDRAULIC IMPLEMENT
S/N REX1-440
PART OF 382-7783 DISTRIBUTION AR
CANNOT BE USED WITH REAR ATTACHMENT
AN ATTACHMENT
S/N REX1-440
PART OF 382-7783 DISTRIBUTION AR
CANNOT BE USED WITH REAR ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP72010855
560-9053: CONTROL AR-HYDRAULIC IMPLEMENT
560-9053 CONTROL AR-HYDRAULIC IMPLEMENT
S/N REX1-UP
WINCH
FOR USE WITH @@@@@415-6752@@@@@
AN ATTACHMENT
S/N REX1-UP
WINCH
FOR USE WITH @@@@@415-6752@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4994 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 2. | 8T-9398 | [4] | BOLT (3/4-10X1.75-IN) | |
| 3. | 353-6049 Y | [1] | CONTROL AR-HYDRAULIC (WINCH) | |
| 4. | 378-6866 Y | [1] | VALVE & MTG GP-IMPLEMENT CONT | |
| 5. | 210-8372 | [1] | GUARD AS | |
| 6. | 378-6886 Y | [1] | ADAPTER GP-FAST FILL FUEL | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72010856
353-4725: COOLER & MTG GP-HYDRAULIC OIL
353-4725 COOLER & MTG GP-HYDRAULIC OIL
S/N REX1-UP
PART OF 363-4404 INSTALLATION AR-ENGINE
S/N REX1-UP
PART OF 363-4404 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-6984 | [2] | MOUNT-RUBBER | |
| 2. | 183-6121 | [8] | WASHER (10.31X38.1X4.78-MM THK) | |
| 3. | 321-8021 | [1] | SUPPORT | |
| 4. | 334-3321 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 360-5604 | [1] | VALVE AS-CONTROL (HYDRAULIC OIL TEMP) | ||
| 238-5085 | [1] | SEAL-O-RING | ||
| 5. | 353-8259 | [1] | BRACKET | |
| 6. | 2W-9710 | [2] | MOUNT AS | |
| 7. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 9. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| 10. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 11. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
#SEBP72010857
387-0419: CYLINDER & LINES GP-LIFT
387-0419 CYLINDER & LINES GP-LIFT -RH
S/N REX1-UP
PART OF 387-0475, 419-6994 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
S/N REX1-UP
PART OF 387-0475, 419-6994 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-9112 I | [1] | HOSE AS | |
| 2. | 230-3219 | [1] | BRACKET AS | |
| 3. | 353-6087 | [1] | TUBE AS | |
| 4. | 353-6088 | [1] | PLATE | |
| 5. | 380-5284 Y | [1] | CYLINDER GP-BULLDOZER LIFT | |
| 6. | 387-0421 | [1] | BRACKET | |
| 7. | 445-7896 | [1] | PLATE AS | |
| 8. | 445-7898 | [1] | BRACKET | |
| 9. | 148-8391 | [1] | ELBOW AS | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 8T-8987 | [1] | ELBOW | ||
| 10. | 153-6251 | [1] | CONNECTOR AS | |
| 4K-1388 | [1] | SEAL-O-RING | ||
| 6V-8400 | [1] | SEAL-O-RING | ||
| 9X-8260 | [1] | CONNECTOR | ||
| 11. | 230-3218 I | [1] | HOSE AS | |
| 12. | 352-3964 | [1] | CLIP (LADDER) | |
| 13. | 431-1414 | [1] | CABLE AS (POSITION SENSING) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 14. | 1P-3704 | [1] | SEAL-RECTANGULAR | |
| 15. | 4J-0520 | [3] | SEAL-O-RING | |
| 16. | 7K-1181 | [1] | STRAP-CABLE | |
| 17. | 7X-7729 | [11] | WASHER (11X25X3-MM THK) | |
| 18. | 8C-3206 | [2] | FLANGE-HALF | |
| 19. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | |
| 22. | 8T-4195 M | [13] | BOLT (M10X1.5X30-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72010858
387-0420: CYLINDER & LINES GP-LIFT
387-0420 CYLINDER & LINES GP-LIFT -LH
S/N REX1-UP
PART OF 387-0475 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
S/N REX1-UP
PART OF 387-0475 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 211-9958 I | [1] | HOSE AS | |
| 2. | 230-3218 I | [1] | HOSE AS | |
| 3. | 230-3219 | [1] | BRACKET AS | |
| 4. | 353-6087 | [1] | TUBE AS | |
| 5. | 353-6088 | [1] | PLATE | |
| 6. | 380-5284 Y | [1] | CYLINDER GP-BULLDOZER LIFT | |
| 7. | 387-0421 | [1] | BRACKET | |
| 8. | 445-7897 | [1] | PLATE AS | |
| 9. | 445-7898 | [1] | BRACKET | |
| 10. | 148-8391 | [1] | ELBOW AS | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 8T-8987 | [1] | ELBOW | ||
| 11. | 153-6251 | [1] | CONNECTOR AS | |
| 4K-1388 | [1] | SEAL-O-RING | ||
| 6V-8400 | [1] | SEAL-O-RING | ||
| 9X-8260 | [1] | CONNECTOR | ||
| 12. | 352-3964 | [1] | CLIP (LADDER) | |
| 13. | 431-1414 | [1] | CABLE AS (POSITION SENSING) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 14. | 1P-3704 | [1] | SEAL-RECTANGULAR | |
| 15. | 4J-0520 | [3] | SEAL-O-RING | |
| 16. | 7K-1181 | [1] | STRAP-CABLE | |
| 17. | 7X-7729 | [11] | WASHER (11X25X3-MM THK) | |
| 18. | 8C-3206 | [2] | FLANGE-HALF | |
| 19. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | |
| 22. | 8T-4195 M | [13] | BOLT (M10X1.5X30-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72010859
387-0475: CYLINDER & LINES GP-LIFT
387-0475 CYLINDER & LINES GP-LIFT -GRADE CONTROL
S/N REX1-UP
FOR USE WITH INSTALLATION AR-GRADE CONTROL
AN ATTACHMENT
S/N REX1-UP
FOR USE WITH INSTALLATION AR-GRADE CONTROL
AN ATTACHMENT
For full view, you need register
