AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9W-7041 EDGE GP-BIT & CUTTING S/N 9S21-UP ABRASION PART OF 389-2110, 491-8134 BLADE & EDGE GP-SEMI-UNIVERSAL AN ATTACHMENT D9T


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
RIPPER GP
ELECTRICAL AND STARTING SYSTEM
RECEIVER GP
WORK TOOLS
RIPPER GP

TRACK-TYPE TRACTOR D9T TRACK-TYPE TRACTOR REX
 D9T TRACK-TYPE TRACTOR REX00001-UP (MACHINE) POWERED BY C18 Engine SEBP7201 D9T REX   (2014)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
EDGE GP-BIT & CUTTING
7T-5391 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
7T-5394 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
9W-7041 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
9W-7042 EDGE GP-BIT & CUTTING
EDGE GP-CUTTING
499-7653 EDGE GP-CUTTING
EDGE-CUTTING
122-9411 EDGE-CUTTING
 

#SEBP72011190
 

9W-7041: EDGE GP-BIT & CUTTING

9W-7041 EDGE GP-BIT & CUTTING
S/N 9S21-UP
ABRASION
PART OF 389-2110, 491-8134 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
i00433351 SEBP7201
9W7041 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-4539 [1] BIT-END (RH)  
  8E-4540 [1] BIT-END (LH)  
2. 9W-7043 [1] EDGE-CUTTING  
3. 112-2471 [2] EDGE-CUTTING  
4. 4J-9058 [36] BOLT-PLOW (1-8X3.25-IN)  
    -OR-
  4J-9208 [36] BOLT-PLOW (1-8X3.5-IN)  
  5P-8250 [36] WASHER (28X49X5-MM THK)  
  2J-3507 [36] NUT-FULL (1-8-THD)  
 

#SEBP72011191
 

9W-7042: EDGE GP-BIT & CUTTING

9W-7042 EDGE GP-BIT & CUTTING
S/N D9J1-UP
ABRASION
PART OF 389-2117, 491-8131 BLADE & EDGE GP-UNIVERSAL
AN ATTACHMENT
i00433353 SEBP7201
9W7042 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-4539 [1] BIT-END (RH)  
  8E-4540 [1] BIT-END (LH)  
2. 9W-7044 [1] EDGE-CUTTING  
3. 112-2471 [2] EDGE-CUTTING  
4. 4J-9058 [39] BOLT-PLOW (1-8X3.25-IN)  
    OR
  4J-9208 [39] BOLT-PLOW (1-8X3.5-IN)  
5. 5P-8250 [39] WASHER (28X49X5-MM THK)  
  2J-3507 [39] NUT-FULL (1-8-THD)  
 

#SEBP72011192
 

499-7653: EDGE GP-CUTTING

499-7653 EDGE GP-CUTTING
S/N REX1-UP
AN ATTACHMENT
i06679746 SEBP7201
4997653 EDGE GP-CUTTING Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3507 [39] NUT-FULL (1-8-THD)  
2. 4F-4042 [39] BOLT-PLOW (1-8X3-IN)  
3. 4T-2987 [2] EDGE-CUTTING (INSIDE, RH, LH)  
4. 4T-2988 [1] EDGE-CUTTING (CENTER)  
5. Y [1] BLADE AS  
6. 265-5477 [2] EDGE-CUTTING (INSIDE, RH, LH)  
7. 265-5478 [1] EDGE-CUTTING (RH)  
8. 265-5479 [1] EDGE-CUTTING (LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72011193
 

122-9411: EDGE-CUTTING

122-9411 EDGE-CUTTING
S/N REX1-UP
ABRASION RESISTANT MATERIAL
FIELD INSTALLATION
i07383361 SEBP7201
1229411 EDGE-CUTTING Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP72011194
 

7J-2964: EDGE-CUTTING

7J-2964 EDGE-CUTTING
S/N REX1-UP
907-MM (35.8-IN)
FIELD INSTALLATION
i06575762 SEBP7201
7J2964 EDGE-CUTTING Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP72011195
 

7J-2979: EDGE-CUTTING

7J-2979 EDGE-CUTTING
S/N REX1-UP
589.2-MM (23.2-IN)
FIELD INSTALLATION
i06575763 SEBP7201
7J2979 EDGE-CUTTING Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP72011196
 

135-2803: FRAME GP-RIPPER

135-2803 FRAME GP-RIPPER
S/N NZ81-UP
PART OF 380-1790 RIPPER AR-SINGLE SHANK
FOR USE WITH SINGLE SHANK RIPPER
AN ATTACHMENT
i00496077 SEBP7201
1352803 FRAME GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3E-6756 [16] SEAL-LIP TYPE  
3. 3E-6757 [8] SEAL-LIP TYPE  
4. 4T-3522 B [22] WASHER (95X170X3-MM THK)  
5. 6J-9482 [2] PIN AS  
6. 8T-5460 M [16] BOLT (M20X2.5X40-MM)  
7. 7T-7305 [8] PLATE  
8. 9J-9055 [2] PIN AS  
9. 9R-6776 I [2] HOSE AS  
10. 154-4492 [2] PLUG-ADAPTER  
11. 111-2104 [2] PIN AS  
12. 132-7994 [2] PIN AS  
13. 135-2804 [1] FRAME & BEARING AS  
  3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  4T-9751 [4] BUSHING  
  8P-9770 [1] PLATE  
14. 136-7921 [2] SPACER (76.7X120X16-MM THK)  
15. 3J-7354 [4] SEAL-O-RING  
16. 4J-5477 [4] SEAL-O-RING  
17. 6V-8628 [2] ELBOW  
18. 6V-9000 [2] ELBOW  
19. 6V-9313 [2] PLUG  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP72011197
 

159-9796: FRAME GP-RIPPER

159-9796 FRAME GP-RIPPER
S/N NZ91-UP
PART OF 380-1793 RIPPER AR-MULTISHANK
AN ATTACHMENT
i01097695 SEBP7201
1599796 FRAME GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3E-6756 [16] SEAL-LIP TYPE  
3. 3E-6757 [8] SEAL-LIP TYPE  
4. 4T-0204 [2] PIN AS  
5. 4T-3522 B [20] WASHER (95X170X3-MM THK)  
6. 4T-9762 [2] PIN AS  
7. 6J-9480 [2] PIN AS  
8. 6V-9313 [2] PLUG  
9. 6Y-9287 [2] SPACER (76.8X170X40-MM THK)  
10. 7T-7305 [8] PLATE  
11. 9R-6776 I [2] HOSE AS  
12. 111-2104 [2] PIN AS  
13. 136-7921 [2] SPACER (76.7X120X16-MM THK)  
14. 154-4492 [2] PLUG-ADAPTER  
15. 187-5341 [1] FRAME & BEARING AS  
15A. 4T-0208 [4] BUSHING  
15B. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
15C. 8P-9770 [1] PLATE  
16. 3J-7354 [4] SEAL-O-RING  
17. 4J-5477 [4] SEAL-O-RING  
18. 6V-8628 [2] ELBOW  
19. 6V-9000 [2] ELBOW  
20. 8T-5460 M [16] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP72011198
 

331-1984: MOUNTING GP-MAST

331-1984 MOUNTING GP-MAST
S/N REX1-UP
PART OF 363-4414, 382-7687 GRADE CONTROL AR, 382-7689 INSTALLATION AR
AN ATTACHMENT
i03460057 SEBP7201
3311984 MOUNTING GP-MAST Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 521-3698 [1] SHIELD AS  
  189-9240 [1] LINK  
2. 331-1985 [1] BRACKET AS (RH)  
3. 458-8217 [1] BRACKET AS (LH)  
4. 337-9998 [1] PLATE (LH)  
5. 338-0000 [1] PLATE (RH)  
6. 198-4778 [10] WASHER-HARD (13.5X30X12-MM THK)  
7. 198-4781 [24] WASHER-HARD (22X40X10-MM THK)  
8. 8T-4131 M [12] NUT (M20X2.5-THD)  
9. 8T-4141 M [12] BOLT (M20X2.5X70-MM)  
10. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
  M   METRIC PART
 

#SEBP72011199
 

217-3561: MOUNTING GP-RIPPER

217-3561 MOUNTING GP-RIPPER
S/N NZ81-UP; NZ91-UP
PART OF 380-1793 RIPPER AR-MULTISHANK, 380-1790 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i02462443 SEBP7201
2173561 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1843 [2] TUBE  
2. 6T-6954 [2] BLOCK  
3. 7T-7305 [2] PLATE  
4. 9U-9712 [1] GUARD AS  
5. 9W-9243 [2] PIN AS  
6. 114-2194 [1] PLATE  
7. 214-3877 [1] GUARD AS  
8. 274-9935 C [1] PLATE & BEARING AS  
8A. 4V-8639 [4] BUSHING  
8B. 216-9722 [1] PLATE AS (LH)  
9. 274-9936 C [1] PLATE & BEARING AS  
9A. 4V-8639 [4] BUSHING  
9B. 216-9723 [1] PLATE AS (RH)  
10. 216-9724 [2] PIN  
11. 138-8455 [12] BOLT (1.5-6X114.3-MM)  
12. 4L-6454 [4] BOLT (3/8-16X1-IN)  
13. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
14. 483-0424 M [2] LOCKNUT (M20X2.5-THD)  
15. 7X-0537 [12] WASHER-HARD (40.5X67X6-MM THK)  
16. 7X-0582 [4] WASHER-HARD (20X44.5X6-MM THK)  
17. 7X-2488 M [2] BOLT (M20X2.5X160-MM)  
18. 8T-4994 [10] WASHER-HARD (20X36.5X3.5-MM THK)  
19. 8T-5460 M [4] BOLT (M20X2.5X40-MM)  
20. 8T-9399 [14] BOLT (3/4-10X2.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Special Instruction
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog D9T :

EDGE GP-BIT & CUTTING
7T-5394 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
7T-5391 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2941 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2940 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2939 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2938 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2937 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2936 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
9W-7042 EDGE GP-BIT & CUTTING
EDGE GP-CUTTING
499-7653 EDGE GP-CUTTING
EDGE-CUTTING
122-9411 EDGE-CUTTING
EDGE-CUTTING
7J-2964 EDGE-CUTTING
EDGE-CUTTING
7J-2979 EDGE-CUTTING
FRAME GP-RIPPER
135-2803 FRAME GP-RIPPER
FRAME GP-RIPPER
159-9796 FRAME GP-RIPPER
MOUNTING GP-MAST
331-1984 MOUNTING GP-MAST
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.