AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

507-2857 EDGE GP-BIT & CUTTING S/N WES1-UP EXTENDED WEAR FOR USE WITH SEMI-UNIVERSAL BLADES FIELD INSTALLATION D6T LGPPAT


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP
HYDRAULIC SYSTEM
LINES GP-RIPPER
WORK TOOLS
RIPPER GP

TRACK-TYPE TRACTOR D6T LGPPAT TRACK-TYPE TRACTOR RAD
 D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Steering RAD00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP7207 D6T LGPPAT RAD   (2014)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
EDGE GP-BIT & CUTTING
507-2855 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2856 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2857 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2858 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2957 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2958 EDGE GP-BIT & CUTTING
 

#SEBP72071180
 

507-2857: EDGE GP-BIT & CUTTING

507-2857 EDGE GP-BIT & CUTTING
S/N WES1-UP
EXTENDED WEAR
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
i06849595 SEBP7207
5072857 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3840 [2] EDGE-CUTTING  
2. 9W-1875 [1] BIT-END (RH)  
3. 9W-1876 [1] BIT-END (LH)  
4. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72071181
 

507-2858: EDGE GP-BIT & CUTTING

507-2858 EDGE GP-BIT & CUTTING
S/N WES1-UP
FIELD INSTALLATION
i06849584 SEBP7207
5072858 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 433-9637 [1] BIT-END (RH)  
2. 433-9639 [1] BIT-END (LH)  
3. 433-9640 [2] EDGE-CUTTING  
4. 2J-3506 [34] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [34] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72071182
 

507-2957: EDGE GP-BIT & CUTTING

507-2957 EDGE GP-BIT & CUTTING
S/N WES1-UP
UTILITY
FIELD INSTALLATION
i06849583 SEBP7207
5072957 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2985 [4] EDGE-CUTTING  
2. 122-8617 [1] BIT-END (LH)  
3. 122-8618 [1] BIT-END (RH)  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72071183
 

507-2958: EDGE GP-BIT & CUTTING

507-2958 EDGE GP-BIT & CUTTING
S/N WES1-UP
GENERAL DUTY
FIELD INSTALLATION
i06849605 SEBP7207
5072958 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2985 [4] EDGE-CUTTING  
2. 6Y-4410 [1] BIT-END (LH)  
3. 6Y-4411 [1] BIT-END (RH)  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72071184
 

507-2959: EDGE GP-BIT & CUTTING

507-2959 EDGE GP-BIT & CUTTING
S/N WES1-UP
EXTENDED WEAR
FIELD INSTALLATION
i06849601 SEBP7207
5072959 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2985 [4] EDGE-CUTTING  
2. 9W-1875 [1] BIT-END (RH)  
3. 9W-1876 [1] BIT-END (LH)  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72071185
 

521-8463: EDGE GP-BIT & CUTTING

521-8463 EDGE GP-BIT & CUTTING
S/N WES1-UP
EXTENDED WEAR, ABRASIVE RESISTANT MATERIAL
FIELD INSTALLATION
i06849599 SEBP7207
5218463 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 283-1027 [1] BIT-END (RH)  
2. 283-1028 [1] BIT-END (LH)  
3. 283-1029 [4] EDGE-CUTTING  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72071186
 

444-1165: FAIRLEAD GP-WINCH

444-1165 FAIRLEAD GP-WINCH
S/N RAD1-UP; WRN1-UP; WES1-UP
3-ROLLER
FOR USE WITH RETROFIT
FIELD INSTALLATION
i05893155 SEBP7207
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  118-7211 [1] FAIRLEAD AS  
  3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
  3K-3963 [6] CUP-BEARING  
  5M-6667 [3] LOCKNUT (1-1/2-12-THD)  
  8T-9383 [3] BOLT (1/2-13X0.75-IN)  
  118-5803 [6] GUARD AS  
  118-6298 [1] BOLT  
  118-6604 [1] SHAFT AS  
  118-6648 [2] SHAFT AS  
  118-6649 [2] ROLLER  
  118-6935 [1] FRAME AS  
  119-1623 [1] WASHER  
  119-2174 [6] BEARING  
  119-2186 [4] RETAINER  
  119-2211 [3] WASHER  
  120-7536 [3] SPACER  
  120-7634 [4] RACE  
  123-4410 [6] SPACER (2X2.75X0.125-IN THK)  
  174-4770 [1] ROLLER GP-TRACK (KIT)  
  3B-8489 FITTING-GREASE (1/8-27 PTF)  
  3K-3963 [2] CUP-BEARING  
  5M-6667 [1] LOCKNUT (1-1/2-12-THD)  
  8T-9383 [1] BOLT (1/2-13X0.75-IN)  
  118-5803 [2] GUARD AS  
  118-6604 [1] SHAFT AS  
  119-2174 [2] BEARING  
  119-2211 [1] WASHER  
  120-7536 [1] SPACER  
 

#SEBP72071187
 

334-6841: INSTALLATION AR-WINCH

334-6841 INSTALLATION AR-WINCH
S/N RAD1-UP; WRN1-UP; WES1-UP
PART OF 371-0953, 371-0954 WINCH AR
FOR USE WITH CONTROL AR-HYDRAULIC (BULLDOZER, RIPPER, WINCH) , CONTROL AR-HYDRAULIC (BULLDOZER, RIPPER), CONTROL AR-HYDRAULIC (BULLDOZER, WINCH)
AN ATTACHMENT
i04036904 SEBP7207
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3W-1356 Y [1] GUARD GP-TRANSMISSION  
  396-2120 Y [1] WIRING GP-WINCH  
   
  7X-7644 [1] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON WINCH DRAWBAR CLEVIS)
  Y   SEPARATE ILLUSTRATION
 

#SEBP72071188
 

458-9375: KIT-RETROFIT

458-9375 KIT-RETROFIT -RIPPER
S/N RAD1-UP; WRN1-UP; WES1-UP
ANTI-DRIFT. REFER TO REHS8572 FOR INSTALLATION INSTRUCTIONS
FIELD INSTALLATION
i05829503 SEBP7207
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  382-4092 Y [1] VALVE & MTG GP-SOLENOID (RIPPER)  
  8T-4178 M [4] BOLT (M10X1.5X90-MM)  
  8T-4196 M [20] BOLT (M10X1.5X35-MM)  
  8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  7G-3833 [1] CLIP (TAB)  
  7G-3834 [1] CLIP (SLOT)  
  8T-4149 [1] ELBOW  
  8C-3205 [8] FLANGE-HALF  
  7G-3832 [1] GROMMET  
  382-4188 I [1] HOSE AS  
  441-5247 I [1] HOSE AS  
  217-6887 [1] MANIFOLD  
  4J-0520 [2] SEAL-O-RING  
  4J-5267 [2] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72071189
 

391-8222: MOUNTING GP-RIPPER

391-8222 MOUNTING GP-RIPPER
S/N MS31-UP
PART OF 387-1087 RIPPER AR
AN ATTACHMENT
i05735455 SEBP7207
3918222 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0300 [1] BRACKET AS  
2. 1U-0301 [2] BRACKET AS  
3. 7T-1975 [1] BRACKET AS  
4. 9N-4449 B [12] SPACER (68X121X1.5-MM THK)  
5. 9N-4450 B [4] SPACER (68X120X5-MM THK)  
6. 9W-0609 [2] SPACER (53X100X35-MM THK)  
7. 1U-0159 [2] PIN  
8. 1U-0612 [2] PIN  
9. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
10. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
11. 299-3423 [20] NUT (1-8-THD)  
12. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
13. 299-3426 [20] WASHER-HARD (28X49X6-MM THK)  
14. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
15. 9M-5854 [20] STUD-TAPERLOCK (1-8-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6T LGPPAT :

EDGE GP-BIT & CUTTING
507-2856 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2855 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
223-3290 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
219-4270 EDGE GP-BIT & CUTTING
BLADE GP-ANGLING
460-2221 BLADE GP-ANGLING
BLADE GP-ANGLING
387-8477 BLADE GP-ANGLING
BLADE & EDGE GP-ANGLING
481-4899 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
481-4898 BLADE & EDGE GP-ANGLING
EDGE GP-BIT & CUTTING
507-2858 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2957 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2958 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2959 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
521-8463 EDGE GP-BIT & CUTTING
444-1165 FAIRLEAD GP-WINCH
334-6841 INSTALLATION AR-WINCH
458-9375 KIT-RETROFIT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.