AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

462-4828 BIT-END -RH S/N MG51-UP; GB61-UP FIELD INSTALLATION D6N TRACK-TYPE TRACTOR


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR GB6
 D6N TRACK-TYPE TRACTOR XL, LGP GB600001-UP (MACHINE) POWERED BY C7.1 Engine SEBP7208 D6N GB6   (2015)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
BIT-END
462-4828 BIT-END
BIT-END
462-4829 BIT-END
BLADE & EDGE GP-ANGLING
358-2210 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
359-3410 BLADE & EDGE GP-ANGLING
 

#SEBP72080950
 

462-4828: BIT-END

462-4828 BIT-END -RH
S/N MG51-UP; GB61-UP
FIELD INSTALLATION
i07048909 SEBP7208
4624828 BIT-END Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP72080951
 

462-4829: BIT-END

462-4829 BIT-END -LH
S/N MG51-UP; GB61-UP
FIELD INSTALLATION
i07048883 SEBP7208
4624829 BIT-END Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP72080952
 

358-2210: BLADE & EDGE GP-ANGLING

358-2210 BLADE & EDGE GP-ANGLING
S/N JNN1-UP
PART OF 480-8595 BLADE AR-ANGLING
AN ATTACHMENT
i06071244 SEBP7208
3582210 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
4. 9J-4782 [1] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
9. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. C [1] BLADE AS-ANGLING  
11A. 456-9700 [1] BEARING  
12. 477-0065 C [1] PLATE AS  
13. 358-2227 [3] PIN  
14. 490-1616 [2] CAP-BEARING  
15. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
16. 8T-5878 M [8] BOLT (M24X3X80-MM)  
17. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
18. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
20. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
22. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
23. 450-3992 C [1] COVER  
24. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080953
 

359-3410: BLADE & EDGE GP-ANGLING

359-3410 BLADE & EDGE GP-ANGLING
S/N NEJ1-UP
PART OF 480-8597 BLADE AR-ANGLING, 481-6176 OPTION AR-WORK TOOL
AN ATTACHMENT
i04606713 SEBP7208
3593410 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 4T-2314 Y [1] EDGE GP-BIT & CUTTING  
4. 9J-4782 [1] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
9. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. 477-0065 [1] PLATE AS  
12. 358-2227 [3] PIN  
13. [1] BLADE AS-ANGLING  
13A. 456-9700 [1] BEARING  
14. 490-1616 [2] CAP-BEARING  
15. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
16. 8T-5878 M [8] BOLT (M24X3X80-MM)  
17. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
18. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
20. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
22. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
23. 450-3992 [1] COVER  
24. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080954
 

386-7275: BLADE & EDGE GP-ANGLING

386-7275 BLADE & EDGE GP-ANGLING -WASTE HANDLING
S/N GB61-UP
PART OF 485-4170 BLADE AR-ANGLING
Type 1
AN ATTACHMENT
i06252016 SEBP7208
3867275 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 9J-4782 [1] PROTECTOR  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
9. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. 358-2224 [1] BRACKET AS  
12. 358-2227 [3] PIN  
13. 490-1616 [2] CAP-BEARING  
14. 450-3992 [1] COVER  
15. 469-0537 [1] BLADE AS-ANGLING  
15A. 456-9700 [1] BEARING  
16. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
17. 7X-2577 M [8] BOLT (M24X3X90-MM)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
21. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
22. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
25. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080955
 

386-7275: BLADE & EDGE GP-ANGLING

386-7275 BLADE & EDGE GP-ANGLING -WASTE HANDLING
S/N GB61-UP
PART OF 485-4170 BLADE AR-ANGLING
Type 2
AN ATTACHMENT
i07655287 SEBP7208
3867275 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 9J-4782 [1] PROTECTOR  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
9. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. 477-0065 C [1] PLATE AS  
12. 358-2227 [3] PIN  
13. 490-1616 [2] CAP-BEARING  
14. 450-3992 [1] COVER  
15. 469-0537 [1] BLADE AS-ANGLING  
15A. 456-9700 [1] BEARING  
16. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
17. 7X-2577 M [8] BOLT (M24X3X90-MM)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
21. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
22. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
25. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080956
 

386-7276: BLADE & EDGE GP-ANGLING

386-7276 BLADE & EDGE GP-ANGLING -WASTE HANDLING
S/N AA31-UP
PART OF 485-4171 BLADE AR-ANGLING
AN ATTACHMENT
i06252056 SEBP7208
3867276 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-0231 [3] RETAINER  
2. 4T-2314 Y [1] EDGE GP-BIT & CUTTING  
3. 9J-4782 [1] PROTECTOR  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 104-4817 [1] PIN  
6. 223-3279 [1] RETAINER  
7. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
8. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
9. 348-6260 B [6] SHIM (1.5-MM THK)  
10. 358-2224 [1] BRACKET AS  
11. 358-2227 [3] PIN  
12. 383-3364 [2] CAP-BEARING  
13. 450-3992 [1] COVER  
14. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
15. 469-3671 [1] BLADE AS-ANGLING  
15A. 456-9700 [1] BEARING  
  450-3991 [1] PLATE AS  
  9R-3761 M [1] BOSS (M10X1.5X51-MM)  
  8P-9770 [1] PLATE  
16. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
17. 7X-2577 M [8] BOLT (M24X3X90-MM)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
21. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
22. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
25. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080957
 

483-9300: BLADE & EDGE GP-ANGLING

483-9300 BLADE & EDGE GP-ANGLING
S/N FD41-UP
PART OF 480-8598, 515-8126 BLADE AR-ANGLING, 481-6177 OPTION AR-WORK TOOL
AN ATTACHMENT
i06863639 SEBP7208
4839300 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
2. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
3. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
4. 8T-4193 M [1] BOLT (M16X2X50-MM)  
5. 8T-5878 M [8] BOLT (M24X3X80-MM)  
6. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
7. 3E-9411 [1] WASHER-HARD (17.5X38X6-MM THK)  
8. 4T-0231 [5] RETAINER  
9. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
10. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
11. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
12. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
13. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-4956 M [5] BOLT (M12X1.75X35-MM)  
16. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
17. 089-8249 [2] SPACER (64X72X13-MM THK)  
18. 104-4817 [1] PIN  
19. 144-5478 [2] BOLT (M20X2.5X130-MM)  
20. 177-4548 [1] PIN  
21. 223-3279 [1] RETAINER  
22. 232-4810 [3] PIN  
23. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
24. 257-8150 Y [1] EDGE GP-BIT & CUTTING  
25. 259-2968 [4] SPACER (52.4X57X23-MM THK)  
26. 328-4847 [1] SPACER (28X17.5X13-MM THK)  
27. 358-2227 [3] PIN  
28. 358-2260 [1] ARM AS-SUPPORT  
29. 370-5549 [1] PIN  
30. 450-3992 [1] COVER  
31. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
32. 477-0065 [1] PLATE AS  
33. 483-9160 [1] BRACKET AS  
34. 483-9298 [2] BOSS  
35. 483-9299 [2] RETAINER  
36. 483-9301 [1] BLADE AS-ANGLING (RH)  
36A. 456-9700 [1] BEARING  
37. 483-9315 B [20] SHIM (0.5-MM THK)  
38. 483-9332 [1] BLADE AS-ANGLING (LH)  
39. 484-0217 [1] PIN AS  
40. 490-1616 [2] CAP-BEARING  
41. 500-4763 [1] PLATE  
42. 505-7069 [1] PIN  
43. 505-7081 [2] PIN AS  
44. 9J-4782 [3] PROTECTOR  
45. 348-6260 B [6] SHIM (1.5-MM THK)  
46. 484-0219 B [12] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080958
 

522-3769: BLADE & EDGE GP-ANGLING

522-3769 BLADE & EDGE GP-ANGLING
S/N MG51-UP; GB61-UP
PART OF 516-8010 BLADE AR-ANGLING
AN ATTACHMENT
i07508253 SEBP7208
5223769 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
4. 7X-2577 M [8] BOLT (M24X3X90-MM)  
5. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
6. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
7. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
8. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
9. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
10. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
13. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
14. 9J-4782 [1] PROTECTOR  
15. 089-8249 [2] SPACER (64X72X13-MM THK)  
16. 104-4817 [1] PIN  
17. 223-3279 [1] RETAINER  
18. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER  
19. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
20. 348-6260 B [6] SHIM (1.5-MM THK)  
21. 358-2227 [3] PIN  
22. 450-3992 [1] COVER  
23. 477-0065 [1] PLATE AS  
24. 490-1616 [2] CAP-BEARING  
25. 522-3770 [1] BLADE AS-ANGLING  
25A. 456-9700 [1] BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080959
 

115-4594: BLADE & EDGE GP-SEMI-UNIVERSAL

115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
S/N AB81-UP
PART OF 364-6200 BULLDOZER AR-SEMI-UNIVERSAL
CANNOT BE USED WITH GRADE CONTROL AR
AN ATTACHMENT
i00493008 SEBP7208
1154594 BLADE & EDGE GP-SEMI-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-8898 [2] PIN  
2. 9U-8079 Y [1] EDGE GP-BIT & CUTTING  
3. 3B-4630 [2] PIN-COTTER  
4. 4T-1481 [1] LINK AS  
5. 115-4595 Y [1] BLADE AS-SEMI-UNIVERSAL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6N :

WIPER GP-WINDOW
495-0770 WIPER GP-WINDOW
WIPER GP-WINDOW
487-7143 WIPER GP-WINDOW
WIPER GP-WINDOW
420-2329 WIPER GP-WINDOW
WIPER GP-WINDOW
420-2329 WIPER GP-WINDOW
WINDOW GP-CAB
496-3384 WINDOW GP-CAB
WINDOW GP-CAB
369-1304 WINDOW GP-CAB
WINDOW GP-CAB
166-2104 WINDOW GP-CAB
WINDOW GP-CAB
166-2103 WINDOW GP-CAB
BIT-END
462-4829 BIT-END
BLADE & EDGE GP-ANGLING
358-2210 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
359-3410 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
386-7275 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
386-7275 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
386-7276 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
483-9300 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
522-3769 BLADE & EDGE GP-ANGLING

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.