115-4595 BLADE AS-SEMI-UNIVERSAL S/N AB81-UP PART OF 115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL AN ATTACHMENT D6N



WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR GB6
 D6N TRACK-TYPE TRACTOR XL, LGP GB600001-UP (MACHINE) POWERED BY C7.1 Engine SEBP7208 D6N GB6   (2015)

WORK TOOLS

BLADE GP
516-8010 BLADE AR-ANGLING
473-0234 BLADE AR-SEMI-UNIVERSAL
BLADE AS-SEMI-UNIVERSAL
115-4595 BLADE AS-SEMI-UNIVERSAL
BLADE GP-ANGLING
358-2259 BLADE GP-ANGLING
BLADE GP-ANGLING
359-3349 BLADE GP-ANGLING
BLADE GP-ANGLING
483-9280 BLADE GP-ANGLING
 

#SEBP72080970
 

115-4595: BLADE AS-SEMI-UNIVERSAL

115-4595 BLADE AS-SEMI-UNIVERSAL
S/N AB81-UP
PART OF 115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
i02593101 SEBP7208
1154595 BLADE AS-SEMI-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1U-0183 [2] DEFLECTOR  
2. 6I-9420 [2] BRACKET AS  
    (EACH INCLUDES)
2A. 7J-5131 [1] TRUNNION  
3. 6I-9461 [1] PLATE (LH)  
4. 6I-9462 [1] PLATE (RH)  
5. 8E-5192 [2] BRACKET AS  
    (EACH INCLUDES)
5A. 4J-1641 [1] TRUNNION  
6. 8E-5194 [1] BRACKET  
7. 8P-9770 [1] PLATE  
8. 9U-8506 [2] BRACKET AS  
    (EACH INCLUDES)
8A. 4T-1504 [1] TRUNNION  
9. 9W-6381 [1] PLATE  
10. 9R-3572 M [3] BOSS (M12X1.75X20-MM)  
  M   METRIC PART
 

#SEBP72080971
 

358-2259: BLADE GP-ANGLING

358-2259 BLADE GP-ANGLING
S/N YAA1-446
PART OF 480-8596 BLADE AR-ANGLING
FOR USE WITH C-FRAME GP-POWER ANGLING
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
AN ATTACHMENT
i06131423 SEBP7208
3582259 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 089-8249 [2] SPACER (64X72X13-MM THK)  
4. 104-4817 [1] PIN  
5. 223-3279 [1] RETAINER  
6. [1] PLATE & FILM GP  
  8T-7371 [1] PLATE-SERIAL NUMBER  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
7. 257-0207 Y [1] EDGE GP-BIT & CUTTING (ANGLING)  
8. 266-4761 [2] PIN AS  
9. 358-2227 [3] PIN  
10. 383-3376 [1] ARM AS-SUPPORT  
11. 437-9738 C [2] DOWEL AS  
12. 450-3992 C [1] COVER  
13. C [1] BLADE AS (RH)  
13A. 456-9700 [1] BEARING  
15. 466-2917 C [6] SPACER (51.2X57X23-MM THK)  
16. 477-0065 C [1] PLATE AS  
17. 490-1616 [2] CAP-BEARING  
18. 2U-9234 C [2] BUSHING  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
21. 8D-3791 [3] PIN  
22. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
23. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
24. 8T-4183 CM [6] BOLT (M12X1.75X40-MM)  
25. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
26. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
29. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
30. 8T-5878 M [8] BOLT (M24X3X80-MM)  
31. 9J-4782 [3] PROTECTOR  
32. 348-6260 BC [6] SHIM (1.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080972
 

359-3349: BLADE GP-ANGLING

359-3349 BLADE GP-ANGLING
S/N YAC1-UP
PART OF 480-8598 BLADE AR-ANGLING, 481-6177 OPTION AR-WORK TOOL
AN ATTACHMENT
i06131427 SEBP7208
3593349 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [5] RETAINER  
3. 8D-3791 [3] PIN  
4. 9J-4782 [3] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 177-4548 [1] PIN  
8. 223-3279 [1] RETAINER  
9. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
10. 437-9738 [2] DOWEL AS  
11. 257-8150 Y [1] EDGE GP-BIT & CUTTING  
12. 259-2968 C [4] SPACER (52.4X57X23-MM THK)  
13. 266-4761 [2] PIN AS  
14. 348-6260 B [6] SHIM (1.5-MM THK)  
15. 477-0065 C [1] PLATE AS  
16. 358-2227 [3] PIN  
17. 358-2260 [1] ARM AS-SUPPORT  
18. 483-9160 [1] BRACKET AS  
19. 370-5549 [1] PIN  
20. C [1] BLADE AS (RH)  
20A. 9R-3761 M [1] BOSS (M10X1.5X51-MM)  
20B. 450-3991 [1] PLATE AS  
20C. 456-9700 [1] BEARING  
21. C [1] BLADE AS (LH)  
21A. 8P-9770 [1] PLATE  
22. 490-1616 [2] CAP-BEARING  
23. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
24. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
25. 8T-5878 M [8] BOLT (M24X3X80-MM)  
26. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
27. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
28. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
29. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4956 M [5] BOLT (M12X1.75X35-MM)  
31. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 450-3992 C [1] COVER  
34. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
36. 2U-9234 C [2] BUSHING  
37. 466-2917 C [2] SPACER (51.2X57X23-MM THK)  
38. 498-6447 Y [2] SHIM GP-SPECIAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080973
 

483-9280: BLADE GP-ANGLING

483-9280 BLADE GP-ANGLING
S/N GB6447-UP
FOLDABLE
PART OF 480-8596 BLADE AR-ANGLING
Type 1
AN ATTACHMENT
i06990416 SEBP7208
4839280 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 089-8249 [2] SPACER (64X72X13-MM THK)  
4. 104-4817 [1] PIN  
5. 223-3279 [1] RETAINER  
6. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER  
7. 257-0207 Y [1] EDGE GP-BIT & CUTTING (ANGLING)  
8. 358-2227 [3] PIN  
9. 358-2260 [1] ARM AS-SUPPORT  
10. 383-3364 [2] CAP-BEARING  
11. 450-3992 [1] COVER  
12. 466-2917 [6] SPACER (51.2X57X23-MM THK)  
13. 477-0065 [1] PLATE AS  
14. [1] BLADE AS-RH  
14A. 456-9700 [1] BEARING  
16. 483-9298 [2] BOSS  
17. 483-9299 [2] RETAINER  
18. 505-7081 [2] PIN AS  
19. 484-0217 [2] PIN AS  
20. 144-5478 [2] BOLT (M20X2.5X130-MM)  
21. 328-4847 [2] SPACER (28X17.5X13-MM THK)  
22. 3E-9411 [2] WASHER-HARD (17.5X38X6-MM THK)  
23. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
24. 8D-3791 [3] PIN  
25. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
26. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
27. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
28. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
29. 8T-4193 M [2] BOLT (M16X2X50-MM)  
30. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
32. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
34. 8T-5878 M [8] BOLT (M24X3X80-MM)  
35. 9J-4782 [3] PROTECTOR  
36. 348-6260 B [6] SHIM (1.5-MM THK)  
37. 483-9315 B [20] SHIM (0.5-MM THK)  
38. 484-0219 B [12] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080974
 

483-9280: BLADE GP-ANGLING

483-9280 BLADE GP-ANGLING
S/N GB6447-UP
FOLDABLE
PART OF 480-8596 BLADE AR-ANGLING
Type 2
AN ATTACHMENT
i07423245 SEBP7208
4839280 BLADE GP-ANGLING Parts scheme 4839280 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 089-8249 [2] SPACER (64X72X13-MM THK)  
4. 104-4817 [1] PIN  
5. 223-3279 [1] RETAINER  
6. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER  
7. 257-0207 Y [1] EDGE GP-BIT & CUTTING (ANGLING)  
8. 358-2227 [3] PIN  
9. 358-2260 [1] ARM AS-SUPPORT  
10. 490-1616 C [2] CAP-BEARING  
11. 450-3992 [1] COVER  
12. 466-2917 [6] SPACER (51.2X57X23-MM THK)  
13. 477-0065 [1] PLATE AS  
14. [1] BLADE AS-RH  
14A. 456-9700 [1] BEARING  
16. 483-9298 [2] BOSS  
17. 483-9299 [2] RETAINER  
18. 505-7081 C [2] PIN AS  
19. 484-0217 C [1] PIN AS  
20. 144-5478 [2] BOLT (M20X2.5X130-MM)  
21. 328-4847 C [1] SPACER (28X17.5X13-MM THK)  
22. 3E-9411 C [1] WASHER-HARD (17.5X38X6-MM THK)  
23. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
24. 232-4810 C [3] PIN  
25. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
26. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
27. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
28. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
29. 8T-4193 CM [1] BOLT (M16X2X50-MM)  
30. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
32. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
34. 8T-5878 M [8] BOLT (M24X3X80-MM)  
35. 9J-4782 [3] PROTECTOR  
36. 348-6260 B [6] SHIM (1.5-MM THK)  
37. 483-9315 B [20] SHIM (0.5-MM THK)  
38. 484-0219 B [12] SHIM (0.5-MM THK)  
39. 505-7069 C [1] PIN  
40. 500-4763 C [1] PLATE  
41. 8T-4184 CM [2] BOLT (M12X1.75X45-MM)  
42. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080975
 

257-0207: EDGE GP-BIT & CUTTING

257-0207 EDGE GP-BIT & CUTTING
S/N GB6447-UP; YAA1-446
PART OF 358-2259, 483-9280 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i02322911 SEBP7208
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  8E-9379 [1] BIT-END (RH)  
  5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-4282 [1] EDGE-CUTTING  
  257-0264 [1] EDGE-CUTTING  
  257-0265 [1] EDGE-CUTTING  
  2J-3506 [22] NUT-FULL (3/4-10-THD)  
  5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72080976
 

257-8150: EDGE GP-BIT & CUTTING

257-8150 EDGE GP-BIT & CUTTING
S/N FD4894-UP; YAC1-UP
PART OF 483-9300 BLADE & EDGE GP-ANGLING, 359-3349 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i02687894 SEBP7208
2578150 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8E-9378 [1] BIT-END (LH)  
2. 8E-9379 [1] BIT-END (RH)  
3. 278-2168 C [2] EDGE-CUTTING  
4. 278-2169 C [1] EDGE-CUTTING  
5. 278-2170 C [1] EDGE-CUTTING  
6. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
7. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
8. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP72080977
 

288-9552: EDGE GP-BIT & CUTTING

288-9552 EDGE GP-BIT & CUTTING -SUPER LGP
S/N MG51-UP
PART OF 354-0954 BLADE & EDGE GP-STRAIGHT
AN ATTACHMENT
i06287689 SEBP7208
2889552 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 4T-6659 [3] EDGE-CUTTING  
2. 3G-4285 [2] BIT-END  
3. 5J-4773 [29] BOLT-PLOW (3/4-10X2.5-IN)  
4. 6V-8182 [29] NUT (3/4-10-THD)  
5. 8T-4994 [29] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72080978
 

3G-4210: EDGE GP-BIT & CUTTING

3G-4210 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N GB61-UP
19-MM (0.7-IN) THICK. REVERSIBLE
FIELD INSTALLATION
i00364466 SEBP7208
3G4210 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3G-4282 [2] EDGE-CUTTING  
2. 3G-4285 [2] BIT-END  
3. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72080979
 

4T-2314: EDGE GP-BIT & CUTTING

4T-2314 EDGE GP-BIT & CUTTING
S/N AA31-UP; NEJ1-UP
PART OF 359-3410, 386-7276 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i00375931 SEBP7208
4T2314 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8E-9378 [1] BIT-END (LH)  
  8E-9379 [1] BIT-END (RH)  
2. 4T-2315 [2] EDGE-CUTTING  
3. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
  2J-3506 [28] NUT-FULL (3/4-10-THD)  
  5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog D6N :

473-0234 BLADE AR-SEMI-UNIVERSAL
516-8010 BLADE AR-ANGLING
515-8126 BLADE AR-ANGLING
485-4171 BLADE AR-ANGLING
485-4170 BLADE AR-ANGLING
480-8598 BLADE AR-ANGLING
480-8597 BLADE AR-ANGLING
480-8596 BLADE AR-ANGLING
BLADE GP-ANGLING
358-2259 BLADE GP-ANGLING
BLADE GP-ANGLING
359-3349 BLADE GP-ANGLING
BLADE GP-ANGLING
483-9280 BLADE GP-ANGLING
BLADE GP-ANGLING
483-9280 BLADE GP-ANGLING
257-0207 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
257-8150 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
288-9552 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
3G-4210 EDGE GP-BIT & CUTTING

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI