AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

250-5861 CYLINDER GP-BULLDOZER LIFT -RH, LH S/N FMC1-UP 114.3-MM (4.50-IN) BORE X 1425-MM (56.10-IN) STROKE PART OF 428-7448, 428-7449 CYLINDER & LINES GP AN ATTACHMENT D8T


HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D8T TRACK-TYPE TRACTOR FMC
 D8T TRACK-TYPE TRACTOR FMC00001-UP (MACHINE) POWERED BY C15 Engine SEBP7213 D8T FMC   (2014)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOTTOM GUARD
446-5119 CYLINDER GP-BOTTOM GUARD
CYLINDER GP-BOTTOM GUARD
446-5119 CYLINDER GP-BOTTOM GUARD
CYLINDER GP-BULLDOZER LIFT
250-5861 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
380-5282 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-DUAL TILT
347-3272 CYLINDER GP-DUAL TILT
CYLINDER GP-RIPPER
155-3653 CYLINDER GP-RIPPER
 

#SEBP72130890
 

250-5861: CYLINDER GP-BULLDOZER LIFT

250-5861 CYLINDER GP-BULLDOZER LIFT -RH, LH
S/N FMC1-UP
114.3-MM (4.50-IN) BORE X 1425-MM (56.10-IN) STROKE
PART OF 428-7448, 428-7449 CYLINDER & LINES GP
AN ATTACHMENT
i02155629 SEBP7213
2505861 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1109 [1] PISTON AS  
  9X-7269 [1] SEAL AS  
2. 6E-1111 [1] ROD AS  
3. 312-4247 [1] SEAL-WIPER  
4. 238-8637 [1] CYLINDER AS (BULLDOZER LIFT)  
4A. 6E-1108 [2] BUSHING  
5. 106-1017 [1] WASHER (36.7X77X6-MM THK)  
6. 163-6474 [1] HEAD  
7. 312-4248 [1] SEAL AS-BUFFER  
8. 173-9682 M [1] BOLT (M36X4X100-MM)  
9. 175-7902 [1] SEAL-O-RING  
10. 1K-7095 [1] RING-BACKUP  
11. 160-6310 [1] CAP-BEARING  
12. 3G-0911 B [28] SHIM (0.8-MM THK)  
13. 4J-3745 [1] RING-WEAR  
14. 7X-0851 M [4] NUT (M24X3-THD)  
15. 8C-9161 [1] RING-WEAR  
16. 8T-0672 M [4] BOLT (M24X3X160-MM)  
17. 312-4245 [1] SEAL-U-CUP  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP72130891
 

380-5282: CYLINDER GP-BULLDOZER LIFT

380-5282 CYLINDER GP-BULLDOZER LIFT
S/N FMC1-UP
114.3-MM (4.5-IN) BORE X 1425-MM (56.1-IN) STROKE. POSITION SENSING
PART OF 388-9404, 388-9405 CYLINDER & LINES GP
AN ATTACHMENT
i05650256 SEBP7213
3805282 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 383-7700 [1] CYLINDER AS (LIFT)  
  6E-1108 [2] BUSHING  
2. 383-7702 [1] ROD AS  
3. 163-6474 [1] HEAD  
4. 8C-9161 J [1] RING-WEAR  
5. 312-4248 J [1] SEAL AS-BUFFER  
6. 312-4247 J [1] SEAL-WIPER  
7. 421-4025 J [1] SEAL-U-CUP  
8. 1K-7095 J [1] RING-BACKUP  
9. 384-8178 [1] PISTON AS  
10. 387-1390 [1] WASHER-HARD (48X76X6-MM THK)  
11. 4J-3745 J [1] RING-WEAR  
12. 5J-7878 [1] NUT-SELF LOCKING (1-7/8-12-THD)  
13. 383-7697 Y [1] SENSOR GP-POSITION (LIFT)  
14. 214-1639 [1] MAGNET  
15. 243-3177 [1] RETAINER  
16. 3G-0911 B [28] SHIM (0.8-MM THK)  
17. 160-6310 [1] CAP-BEARING  
18. 8T-0672 M [4] BOLT (M24X3X160-MM)  
19. 7X-0851 M [4] NUT (M24X3-THD)  
20. 095-9806 M [4] BOLT-SOCKET HEAD (M16X2X80-MM)  
21. 175-7902 J [1] SEAL-O-RING  
22. 119-7843 J [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  319-3557 J [1] KIT-SEAL (LIFT CYLINDER)  
    (INCLUDES BACKUP RING, WEAR RINGS, SEAL ASSEMBLIES, SEAL-O-RING, SEAL-U-CUP & WIPER SEAL)
   
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72130892
 

347-3272: CYLINDER GP-DUAL TILT

347-3272 CYLINDER GP-DUAL TILT -RH, LH
S/N FMC1-UP
184.15-MM (7.2-IN) BORE X 153.8-MM (6.1-IN) STROKE. BULLDOZER
PART OF 456-2172, 456-2176 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i04016729 SEBP7213
3473272 CYLINDER GP-DUAL TILT Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 2J-0564 [1] LOCKNUT (2-12-THD)  
3. 241-0551 [1] CYLINDER AS  
3A. 1U-2182 [2] BUSHING  
4. 241-0552 [1] ROD AS  
4A. 7J-3297 [1] BEARING  
4B. 8T-9044 [1] RING-RETAINING  
5. 347-3271 [1] PISTON GP-HYDRAULIC CYLINDER  
5A. 1J-8569 [1] INSERT-PISTON  
5B. 2H-3932 [1] SEAL-O-RING  
5C. 3K-8692 [2] RING-BACKUP  
5D. 5J-4993 [1] SEAL AS  
  5J-4407 [1] RING-EXPANDER  
  5J-4408 [1] SEAL  
5E. 6E-1443 [1] INSERT  
5F. 347-3274 [1] PLUNGER  
6. 191-3583 [1] HEAD  
7. 311-9316 [1] SEAL AS-BUFFER  
8. 6V-3669 M [8] BOLT (M20X2.5X80-MM)  
9. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
10. 311-9317 [1] SEAL-U-CUP  
11. 1J-2674 [1] RING-WEAR  
12. 1U-1738 [1] RING-BACKUP  
13. 311-9318 [1] SEAL-WIPER  
14. 5P-7593 [1] SEAL-O-RING  
15. 8C-5245 [1] RING-WEAR  
16. 8T-8381 [1] SEAL  
17. 9T-5900 [1] WASHER (51.2X98X4.76-MM THK)  
  M   METRIC PART
 

#SEBP72130893
 

155-3653: CYLINDER GP-RIPPER

155-3653 CYLINDER GP-RIPPER -LIFT
S/N CX21-UP; CX31-UP; CX41-UP; CX61-UP
184.15-MM (7.2-IN) BORE X 281.4-MM (11.1-IN) STROKE
PART OF 385-2711, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i01442847 SEBP7213
1553653 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-7686 [1] LOCKNUT (2.5X12-THD)  
2. 1J-2674 J [1] RING-WEAR  
3. 5J-4993 J [1] SEAL AS  
  5J-4407 [1] RING-EXPANDER  
  5J-4408 [1] SEAL  
4. 1U-2716 [1] PISTON  
5. 6J-9121 [1] WASHER (63.73X107.95X8.74-MM THK)  
6. 155-3850 [1] CYLINDER AS  
6A. 3G-5999 [1] BUSHING  
7. 5P-7593 J [1] SEAL-O-RING  
8. 158-3027 [1] RING-BACKUP  
9. 8T-8381 J [1] SEAL  
10. 155-3849 [1] HEAD  
11. 6V-5845 M [8] BOLT (M20X2.5X70-MM)  
12. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
13. 9T-0584 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
15. 8C-3206 [4] FLANGE-HALF  
16. 312-4247 J [1] SEAL-WIPER  
17. 312-4248 J [1] SEAL AS-BUFFER  
18. 421-4025 J [1] SEAL-U-CUP  
19. 8T-1714 J [1] RING-WEAR  
20. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  244-2067 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP72130894
 

6E-3113: CYLINDER GP-RIPPER PIN PULLER

6E-3113 CYLINDER GP-RIPPER PIN PULLER
S/N FMC1-UP
101.6-MM (4-IN) BORE X 138.5-MM (5.5-IN) STROKE
PART OF 160-3616 PULLER AR-PIN
AN ATTACHMENT
i00398919 SEBP7213
6E3113 CYLINDER GP-RIPPER PIN PULLER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-9779 M [1] BOLT (M24X3X80-MM)  
2. 6J-2797 [1] RING-WEAR  
3. 5J-5402 [1] SEAL AS  
4. 9T-3493 [1] PISTON  
5. 6V-8237 [1] WASHER (26X44X4-MM THK)  
6. 4T-6907 [1] RING-WEAR  
7. 6E-3980 [1] ROD AS  
8. 308-1880 [1] SEAL-WIPER  
9. 167-2300 [1] SEAL-U-CUP  
10. 167-2190 [1] SEAL AS-BUFFER  
11. 2K-6830 [1] RING-BACKUP  
12. 175-7900 [1] SEAL-O-RING  
13. 6E-4976 [1] HEAD  
14. 6E-3976 [1] CYLINDER AS  
  M   METRIC PART
 

#SEBP72130895
 

155-3652: CYLINDER GP-RIPPER TIP

155-3652 CYLINDER GP-RIPPER TIP -TILT, LH
S/N CX21-UP; CX31-UP; CX41-UP; CX61-UP
165.1-MM (6.5-IN) BORE X 437-MM (17.2-IN) STROKE
PART OF 385-2711, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i01442898 SEBP7213
1553652 CYLINDER GP-RIPPER TIP Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 155-3857 [1] CYLINDER AS  
2A. 3G-5999 [1] BUSHING  
3. 1P-4576 [2] FLANGE-HALF  
4. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
6. 1P-4577 [2] FLANGE-HALF  
7. 8T-0666 M [2] BOLT (M24X3X90-MM)  
8. 6V-8133 M [4] BOLT (M24X3X80-MM)  
9. 155-3856 [1] HEAD  
10. 8T-8379 J [1] SEAL-HEAD  
11. 158-3026 [1] RING-BACKUP  
12. 7J-8956 J [1] SEAL-O-RING  
13. 9T-0098 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
15. 5J-4991 J [1] SEAL AS  
  5J-4592 [1] SEAL  
  5J-4593 [1] RING-EXPANDER  
16. 3J-9703 [1] RING-WEAR  
17. 6J-9748 [1] PISTON  
18. 2J-0564 [1] LOCKNUT (2-12-THD)  
19. 8T-1714 J [1] RING-WEAR  
20. 312-4248 [1] SEAL AS-BUFFER  
21. 167-2319 [1] SEAL-U-CUP  
22. 312-4247 [1] SEAL-WIPER  
   
    AVAILABLE REPAIR KIT(S):
  244-2050 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP72130896
 

165-0102: CYLINDER GP-RIPPER TIP

165-0102 CYLINDER GP-RIPPER TIP -TILT, RH
S/N CX21-UP; CX31-UP; CX41-UP; CX61-UP
165.1-MM (6.5-IN) BORE X 437.6-MM (17.2-IN) STROKE
PART OF 385-2711, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i01442934 SEBP7213
1650102 CYLINDER GP-RIPPER TIP Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-0564 [1] LOCKNUT (2-12-THD)  
2. 165-0101 [1] CYLINDER AS  
  3G-5999 [1] BUSHING  
3. 1P-4576 [2] FLANGE-HALF  
4. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
6. 1P-4577 [2] FLANGE-HALF  
7. 8T-0666 M [2] BOLT (M24X3X90-MM)  
8. 173-9779 M [4] BOLT (M24X3X80-MM)  
9. 155-3856 [1] HEAD  
10. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
11. 8T-1714 J [1] RING-WEAR  
12. 9T-0096 J [1] RING-WEAR  
13. 9T-0098 [1] ROD AS  
  3G-5999 [1] BUSHING  
14. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
15. 158-3026 [1] RING-BACKUP  
16. 312-4247 J [1] SEAL-WIPER  
17. 6J-9748 [1] PISTON  
18. 312-4248 J [1] SEAL AS-BUFFER  
19. 167-2319 [1] SEAL-U-CUP  
20. 5J-4991 J [1] SEAL AS  
21. 7J-8956 J [1] SEAL-O-RING  
22. 8T-8379 J [1] SEAL-HEAD  
   
    AVAILABLE REPAIR KIT(S):
  244-2050 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP72130897
 

240-7347: CYLINDER GP-TILT

240-7347 CYLINDER GP-TILT -BULLDOZER
S/N FMC1-565
184.15-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@492-0310@@@@@
AN ATTACHMENT
i02227992 SEBP7213
2407347 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 240-7348 [1] CYLINDER AS  
1A. 1U-2182 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-1183 [1] PISTON  
4. 5P-7593 J [1] SEAL-O-RING  
5. 158-3027 J [1] RING-BACKUP  
6. 191-3583 [1] HEAD  
7. 240-7349 [1] ROD AS  
7A. 7J-3297 [1] BEARING  
7B. 8T-9044 [1] RING-RETAINING  
8. 6V-3669 M [8] BOLT (M20X2.5X80-MM)  
9. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
10. 8T-1790 J [1] SEAL AS  
11. 1J-2674 J [1] RING-WEAR  
12. 225-3286 [1] SEAL-WIPER  
13. 167-2324 [1] SEAL-U-CUP  
14. 167-2211 [1] SEAL AS-BUFFER  
15. 8C-5245 J [1] RING-WEAR  
16. 8T-8381 J [1] SEAL  
17. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  245-6839 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP72130898
 

491-0252: CYLINDER GP-TILT

491-0252 CYLINDER GP-TILT -BULLDOZER
S/N FMC566-UP
184.2-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT FOR @@@@@492-0310@@@@@
AN ATTACHMENT
i06790267 SEBP7213
4910252 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-2674 [1] RING-WEAR  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 6V-3669 M [8] BOLT (M20X2.5X80-MM)  
5. 8C-5245 [1] RING-WEAR  
6. 8T-1790 [1] SEAL AS  
7. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
8. 8T-8381 [1] SEAL  
9. 158-3027 [1] RING-BACKUP  
10. 191-3583 [1] HEAD  
11. 311-9316 [1] SEAL AS-BUFFER  
12. 311-9317 [1] SEAL-U-CUP  
13. 5P-7593 [1] SEAL-O-RING  
14. 491-0256 [1] ROD AS  
14A. 7J-3297 [1] BEARING  
  8T-9044 [1] RING-RETAINING  
15. 491-0258 [1] PISTON  
16. 492-0309 [1] CYLINDER AS  
16A. 1U-2182 [2] BUSHING  
17. 311-9318 [1] SEAL-WIPER  
  M   METRIC PART
 

#SEBP72130899
 

492-0310: CYLINDER GP-TILT

492-0310 CYLINDER GP-TILT -BULLDOZER
S/N FMC566-UP
184.2-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@491-0252@@@@@
FIELD REPLACEMENT FOR @@@@@240-7347@@@@@
AN ATTACHMENT
i06790223 SEBP7213
4920310 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-2674 [1] RING-WEAR  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 5P-7593 [1] SEAL-O-RING  
5. 6E-1183 [1] PISTON  
6. 6V-3669 M [8] BOLT (M20X2.5X80-MM)  
7. 8C-5245 [1] RING-WEAR  
8. 8T-1790 [1] SEAL AS  
9. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
10. 8T-8381 [1] SEAL  
11. 158-3027 [1] RING-BACKUP  
12. 191-3583 [1] HEAD  
  311-9318 [1] SEAL-WIPER  
13. 240-7349 [1] ROD AS  
14. 311-9316 [1] SEAL AS-BUFFER  
15. 311-9317 [1] SEAL-U-CUP  
16. 311-9318 [1] SEAL-WIPER  
17. 492-0309 [1] CYLINDER AS  
17A. 1U-2182 [2] BUSHING  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D8T :

CYLINDER GP-BOTTOM GUARD
446-5119 CYLINDER GP-BOTTOM GUARD
CYLINDER GP-BOTTOM GUARD
446-5119 CYLINDER GP-BOTTOM GUARD
CYLINDER AR-LIFT
428-7447 CYLINDER AR-LIFT
CYLINDER & LINES GP
428-7449 CYLINDER & LINES GP
CYLINDER & LINES GP
428-7448 CYLINDER & LINES GP
CYLINDER & LINES GP
388-9405 CYLINDER & LINES GP
CYLINDER & LINES GP
388-9404 CYLINDER & LINES GP
CYLINDER & LINES GP
388-2152 CYLINDER & LINES GP
CYLINDER GP-BULLDOZER LIFT
380-5282 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-DUAL TILT
347-3272 CYLINDER GP-DUAL TILT
CYLINDER GP-RIPPER
155-3653 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER PIN PULLER
6E-3113 CYLINDER GP-RIPPER PIN PULLER
CYLINDER GP-RIPPER TIP
155-3652 CYLINDER GP-RIPPER TIP
CYLINDER GP-RIPPER TIP
165-0102 CYLINDER GP-RIPPER TIP
CYLINDER GP-TILT
240-7347 CYLINDER GP-TILT
CYLINDER GP-TILT
491-0252 CYLINDER GP-TILT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.