IMPLEMENTS
BULLDOZER GPC-FRAME GP
BULLDOZER GP
IMPLEMENTS
BULLDOZER GP
#SEBP72240600
156-4125: ARM GP-BULLDOZER
156-4125 ARM GP-BULLDOZER -LH
S/N MEJ1-UP
PART OF 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N MEJ1-UP
PART OF 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-5116 | [1] | BRACKET AS | |
| 2. | 156-4124 | [1] | NUT | |
| 3. | 156-4127 | [1] | BEARING | |
| 8E-5818 B | [14] | SHIM (0.8-MM THK) | ||
| 4. | 156-4128 | [1] | END AS | |
| 4J-4968 | [2] | RING-LOCK | ||
| 7T-9147 | [1] | BEARING | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
#SEBP72240601
156-4126: ARM GP-BULLDOZER
156-4126 ARM GP-BULLDOZER -RH
S/N MEJ1-UP
PART OF 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N MEJ1-UP
PART OF 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-5116 | [1] | BRACKET AS | |
| 2. | 156-4124 | [1] | NUT | |
| 3. | 156-4127 | [1] | BEARING | |
| 8E-5818 B | [14] | SHIM (0.8-MM THK) | ||
| 4. | 156-4128 | [1] | END AS | |
| 4J-4968 | [2] | RING-LOCK | ||
| 7T-9147 | [1] | BEARING | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
#SEBP72240602
159-8142: C-FRAME GP
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-9571 | [2] | KEY | |
| 2. | 9W-7602 B | [56] | SHIM (0.8-MM THK) | |
| 3. | 159-8143 | [1] | C-FRAME AS (LH) | |
| 8P-9770 | [1] | PLATE | ||
| 1U-2533 | [1] | BAR | ||
| 3G-9626 | [1] | END-JOINT | ||
| 7T-5140 | [1] | STEP | ||
| 9W-7602 B | [14] | SHIM (0.8-MM THK) | ||
| 158-3650 | [3] | BRACKET | ||
| 3A. | 1J-6744 | [1] | BEARING | |
| 3B. | 8E-6443 | [1] | TRUNNION AS | |
| 3C. | 9J-0123 | [1] | TRUNNION | |
| 4. | 159-8144 | [1] | C-FRAME AS (RH) | |
| 9W-7602 | [14] | SHIM (0.8-MM THK) | ||
| 1U-2533 | [1] | BAR | ||
| 7T-5140 | [1] | STEP | ||
| 8P-9770 | [1] | PLATE | ||
| 4A. | 1J-6744 | [1] | BEARING | |
| 159-8939 | [1] | ADAPTER AS | ||
| 4B. | [2] | BUSHING | ||
| 5M-6214 | [1] | PLUG (1/8-27 PTF) | ||
| 4C. | 8E-6444 | [1] | TRUNNION AS | |
| 4D. | 9J-0123 | [1] | TRUNNION | |
| 5. | 163-2013 | [1] | RETAINER | |
| 6. | 193-3063 | [2] | CAP AS-BEARING | |
| 7. | 195-6283 M | [4] | NUT-SQUARE (M30X3.5-THD) | |
| 8. | 237-4872 | [1] | PIN-PIVOT | |
| 9. | 3E-9850 M | [4] | BOLT (M30X3.5X220-MM) | |
| 10. | 7X-2562 M | [2] | BOLT (M20X2.5X45-MM) | |
| 11. | 7X-2565 M | [32] | BOLT (M20X2.5X100-MM) | |
| 12. | 8T-4123 | [64] | WASHER (22X35X3.5-MM THK) | |
| 13. | 8T-4131 M | [32] | NUT (M20X2.5-THD) | |
| 14. | 9X-8258 | [4] | WASHER (33X56X6-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP72240603
385-5575: INSTALLATION AR-BULLDOZER
385-5575 INSTALLATION AR-BULLDOZER
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 1
FOR USE WITH @@@@@417-3722@@@@@, @@@@@417-3721@@@@@
AN ATTACHMENT
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 1
FOR USE WITH @@@@@417-3722@@@@@, @@@@@417-3721@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 7. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 9. | 239-9940 | [1] | PIN | |
| 10. | 240-7347 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72240604
385-5575: INSTALLATION AR-BULLDOZER
385-5575 INSTALLATION AR-BULLDOZER
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 2
FOR USE WITH @@@@@417-3722@@@@@, @@@@@417-3721@@@@@
AN ATTACHMENT
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 2
FOR USE WITH @@@@@417-3722@@@@@, @@@@@417-3721@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 7. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 9. | 239-9940 | [1] | PIN | |
| 10. | 492-0310 CY | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72240605
385-5575: INSTALLATION AR-BULLDOZER
385-5575 INSTALLATION AR-BULLDOZER
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 3
FOR USE WITH @@@@@417-3722@@@@@, @@@@@417-3721@@@@@
AN ATTACHMENT
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 3
FOR USE WITH @@@@@417-3722@@@@@, @@@@@417-3721@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 7. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 9. | 239-9940 | [1] | PIN | |
| 10. | 491-0252 CY | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72240606
385-5576: INSTALLATION AR-BULLDOZER
385-5576 INSTALLATION AR-BULLDOZER
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 1
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 1
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 7. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 8. | 239-9940 | [1] | PIN | |
| 9. | 240-7347 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 10. | 386-5277 Y | [1] | LINES GP-TILT CYLINDER | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72240607
385-5576: INSTALLATION AR-BULLDOZER
385-5576 INSTALLATION AR-BULLDOZER
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 2
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 2
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 7. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 8. | 239-9940 | [1] | PIN | |
| 9. | 492-0310 CY | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 10. | 386-5277 Y | [1] | LINES GP-TILT CYLINDER | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72240608
385-5576: INSTALLATION AR-BULLDOZER
385-5576 INSTALLATION AR-BULLDOZER
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 3
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
S/N MEJ1-UP
SINGLE TILT, GUARDED
Type 3
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 7. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 8. | 239-9940 | [1] | PIN | |
| 9. | 491-0252 CY | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 10. | 386-5277 Y | [1] | LINES GP-TILT CYLINDER | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72240609
385-5581: INSTALLATION AR-BULLDOZER
385-5581 INSTALLATION AR-BULLDOZER -ANGLING BLADE
S/N MEJ1-UP
AN ATTACHMENT
S/N MEJ1-UP
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-7016 | [2] | PIN | |
| 2. | 3J-5190 | [2] | CAP-BEARING | |
| 4. | 4J-5401 | [1] | RETAINER | |
| 5. | 5P-0370 | [2] | LOCK PIN | |
| 6. | 6E-0397 Y | [2] | CYLINDER GP-TILT | |
| 7. | 6J-3774 | [2] | PIN | |
| 8. | 6J-5179 | [2] | RETAINER | |
| 9. | 7T-6850 | [2] | RETAINER | |
| 10. | 8E-5818 B | [52] | SHIM (0.8-MM THK) | |
| 11. | 8E-6579 Y | [1] | LINES GP-TILT CYLINDER (ANGLING BULLDOZER) | |
| 13. | 156-4125 Y | [1] | ARM GP-BULLDOZER (LH) | |
| 14. | 156-4126 Y | [1] | ARM GP-BULLDOZER (RH) | |
| 15. | 158-3653 | [2] | PIN | |
| 16. | 158-3657 | [2] | STUD-BALL | |
| 17. | 159-8142 Y | [1] | C-FRAME GP | |
| 18. | 159-8807 | [1] | PIN | |
| 19. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 20. | 7X-2552 M | [5] | BOLT (M16X2X30-MM) | |
| 21. | 7X-2574 M | [4] | BOLT (M24X3X45-MM) | |
| 22. | 8T-4175 M | [8] | BOLT (M16X2X90-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
