AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering CG800001-UP (MACHINE) POWERED BY C9.3 Engine BASIC ENGINE Caterpillar SIS



TRACK-TYPE TRACTOR D6T XW TRACK-TYPE TRACTOR CG8
 D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering CG800001-UP (MACHINE) POWERED BY C9.3 Engine SEBP7226 D6T XW CG8   (2014)

Parts group D6T XW:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
294-3593 CAMSHAFT GP
294-3593 CAMSHAFT GP
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-ALTERNATOR & COMPR
344-0371 MOUNTING GP-ALTERNATOR & COMPR
344-0371 MOUNTING GP-ALTERNATOR & COMPR
S/N SYE1-UP
LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE. INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
294-2987 CRANKSHAFT GP
294-2987 CRANKSHAFT GP
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
SEAL GP-CRANKSHAFT
295-2351 SEAL GP-CRANKSHAFT
295-2351 SEAL GP-CRANKSHAFT
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
CYLINDER BLOCK GP
COVER & MTG GP-CYLINDER BLOCK
424-5993 COVER & MTG GP-CYLINDER BLOCK
424-5993 COVER & MTG GP-CYLINDER BLOCK
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
CANNOT BE USED WITH CRANKCASE PRESSURE SENSOR
AN ATTACHMENT
CYLINDER BLOCK AS
523-9619 CYLINDER BLOCK AS
523-9619 CYLINDER BLOCK AS
S/N SYE1-UP
PART OF 277-7261 CYLINDER BLOCK GP
AN ATTACHMENT
CYLINDER BLOCK AS
524-2485 CYLINDER BLOCK AS
524-2485 CYLINDER BLOCK AS
S/N SYE1-UP
PART OF 523-9619 CYLINDER BLOCK AS
AN ATTACHMENT
CYLINDER BLOCK GP
277-7261 CYLINDER BLOCK GP
277-7261 CYLINDER BLOCK GP
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
275-4260 PLUG GP-CYLINDER BLOCK
275-4260 PLUG GP-CYLINDER BLOCK
S/N SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK, FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER., SEE 350-5472 FOR JACKET WATER HEATER INSTALLATION LOCATION.
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
275-8699 PLUG GP-CYLINDER BLOCK
275-8699 PLUG GP-CYLINDER BLOCK
S/N SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER
AN ATTACHMENT
PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE -COMPRESSION BRAKE
S/N SYE1-UP
PROVIDES A PLUG GP FOR COMPRESSION BRAKE OIL SUPPLY WHEN COMPRESSION BRAKE IS NOT USED
PART OF 416-8790, 416-8791 ENGINE AR-COMPLETE
AN ATTACHMENT
PLUG GP-ENGINE
348-1101 PLUG GP-ENGINE
348-1101 PLUG GP-ENGINE
S/N SYE1-UP
PROVIDES A PLUG GROUP FOR CRS AND CAB HEAT PORTS ON THE SPACER ON THE ENGINE.
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
PLUG GP-ENGINE
453-3632 PLUG GP-ENGINE
453-3632 PLUG GP-ENGINE
S/N SYE1-UP
PART OF 416-8790, 416-8791 ENGINE AR-COMPLETE
AN ATTACHMENT
PLUG GP-ENGINE
486-8491 PLUG GP-ENGINE
486-8491 PLUG GP-ENGINE
S/N SYE1-UP
PART OF 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
CYLINDER HEAD GP
BRACKET GP-MOUNTING
344-4056 BRACKET GP-MOUNTING
344-4056 BRACKET GP-MOUNTING
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
BRACKET GP-MOUNTING
453-9158 BRACKET GP-MOUNTING
453-9158 BRACKET GP-MOUNTING
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
CYLINDER HEAD AS
328-7475 CYLINDER HEAD AS
328-7475 CYLINDER HEAD AS
S/N SYE1-UP
PART OF 346-6388 CYLINDER HEAD GP
AN ATTACHMENT
CYLINDER HEAD AS
491-1831 CYLINDER HEAD AS
491-1831 CYLINDER HEAD AS
S/N SYE1-UP
PART OF 497-5506 CYLINDER HEAD GP
AN ATTACHMENT
CYLINDER HEAD GP
346-0485 CYLINDER HEAD GP
346-0485 CYLINDER HEAD GP
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
CYLINDER HEAD GP
346-6388 CYLINDER HEAD GP
346-6388 CYLINDER HEAD GP
S/N SYE1-UP
PART OF 346-0485 CYLINDER HEAD GP
AN ATTACHMENT
CYLINDER HEAD GP
497-5506 CYLINDER HEAD GP
497-5506 CYLINDER HEAD GP
S/N SYE1-UP
PART OF 502-6504 CYLINDER HEAD GP
AN ATTACHMENT
CYLINDER HEAD GP
502-6504 CYLINDER HEAD GP
502-6504 CYLINDER HEAD GP
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
FASTENER GP-CYLINDER HEAD
290-6884 FASTENER GP-CYLINDER HEAD
290-6884 FASTENER GP-CYLINDER HEAD
S/N SYE1-UP
PART OF 346-0485, 502-6504 CYLINDER HEAD GP
AN ATTACHMENT
PLUG GP-CYLINDER HEAD
346-4997 PLUG GP-CYLINDER HEAD
346-4997 PLUG GP-CYLINDER HEAD
S/N SYE1-UP
PART OF 416-8790, 416-8791 ENGINE AR-COMPLETE
CANNOT BE USED WITH AIR COMPRESSOR GROUPS
AN ATTACHMENT
PLUG GP-CYLINDER HEAD
495-5748 PLUG GP-CYLINDER HEAD
495-5748 PLUG GP-CYLINDER HEAD
S/N SYE1-UP
PART OF 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE -COMPRESSION BRAKE
S/N SYE1-UP
PROVIDES A PLUG GP FOR COMPRESSION BRAKE OIL SUPPLY WHEN COMPRESSION BRAKE IS NOT USED
PART OF 416-8790, 416-8791 ENGINE AR-COMPLETE
AN ATTACHMENT
PLUG GP-ENGINE
348-1101 PLUG GP-ENGINE
348-1101 PLUG GP-ENGINE
S/N SYE1-UP
PROVIDES A PLUG GROUP FOR CRS AND CAB HEAT PORTS ON THE SPACER ON THE ENGINE.
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
PLUG GP-ENGINE
453-3632 PLUG GP-ENGINE
453-3632 PLUG GP-ENGINE
S/N SYE1-UP
PART OF 416-8790, 416-8791 ENGINE AR-COMPLETE
AN ATTACHMENT
PLUG GP-ENGINE
486-8491 PLUG GP-ENGINE
486-8491 PLUG GP-ENGINE
S/N SYE1-UP
PART OF 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
DAMPER GP
DAMPER & PULLEY GP
344-0372 DAMPER & PULLEY GP
344-0372 DAMPER & PULLEY GP
S/N SYE1-UP
PULLEY DIAMETER 232.5-MM. PROVIDES A SPUN STEEL 8 RIB K-SECTION POLY RIB CRANKSHAFT PULLEY & ADAPTER
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
FOR USE WITH TRUNNION MOUNT FRONT SUPPORTS
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
337-2181 FLYWHEEL GP
337-2181 FLYWHEEL GP
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
GEAR GP-REAR
175-6260 GEAR GP-REAR
175-6260 GEAR GP-REAR
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
294-2931 GEAR GP-FRONT
294-2931 GEAR GP-FRONT
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
GEAR GP-REAR
175-6260 GEAR GP-REAR
175-6260 GEAR GP-REAR
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
HOUSING GP-FLYWHEEL
HOUSING AS-FLYWHEEL
381-2401 HOUSING AS-FLYWHEEL
381-2401 HOUSING AS-FLYWHEEL
S/N SYE1-UP
PART OF 381-2360 HOUSING GP-FLYWHEEL
AN ATTACHMENT
HOUSING GP-FLYWHEEL
381-2360 HOUSING GP-FLYWHEEL
381-2360 HOUSING GP-FLYWHEEL
S/N SYE1-UP
PART OF 416-8790, 416-8791 ENGINE AR-COMPLETE
Type 1
AN ATTACHMENT
HOUSING GP-FLYWHEEL
381-2360 HOUSING GP-FLYWHEEL
381-2360 HOUSING GP-FLYWHEEL
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
Type 2
AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
269-5325 COVER GP-FRONT HOUSING
269-5325 COVER GP-FRONT HOUSING
S/N SYE1-UP
PROVIDES COVER FOR ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
COVER GP-FRONT HOUSING
338-2640 COVER GP-FRONT HOUSING
338-2640 COVER GP-FRONT HOUSING
S/N SYE1-UP
PROVIDES A LAMINATED FRONT COVER FOR USE WITH ENGINES FOR SOUND REDUCTION PURPOSES
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
GEAR GP-FRONT
294-2931 GEAR GP-FRONT
294-2931 GEAR GP-FRONT
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
HOUSING GP-FRONT
338-5813 HOUSING GP-FRONT
338-5813 HOUSING GP-FRONT
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
348-9192 LIFTING GP-ENGINE
348-9192 LIFTING GP-ENGINE -REAR
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR & COMPR
344-0371 MOUNTING GP-ALTERNATOR & COMPR
344-0371 MOUNTING GP-ALTERNATOR & COMPR
S/N SYE1-UP
LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE. INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
375-3210 MOUNTING GP-ENGINE
375-3210 MOUNTING GP-ENGINE
S/N CG81-UP; MEL1-UP; SGT1-UP
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
SUPPORT GP-ENGINE
345-1232 SUPPORT GP-ENGINE
345-1232 SUPPORT GP-ENGINE -FRONT
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
TRUNNION GP-ENGINE
311-8095 TRUNNION GP-ENGINE
311-8095 TRUNNION GP-ENGINE
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
PAN GP-OIL
DRAIN GP-ENGINE OIL
4P-2102 DRAIN GP-ENGINE OIL
4P-2102 DRAIN GP-ENGINE OIL
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
PAN GP-OIL
362-3301 PAN GP-OIL
362-3301 PAN GP-OIL
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
370-0969 PISTON & ROD GP
370-0969 PISTON & ROD GP
S/N SYE1-1032
17.0:1 COMPRESSION RATIO
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
PISTON & ROD GP
437-7173 PISTON & ROD GP
437-7173 PISTON & ROD GP
S/N SYE1033-UP
PART OF 381-1732 ENGINE AR-CORE
AN ATTACHMENT
PULLEY GP
DAMPER & PULLEY GP
344-0372 DAMPER & PULLEY GP
344-0372 DAMPER & PULLEY GP
S/N SYE1-UP
PULLEY DIAMETER 232.5-MM. PROVIDES A SPUN STEEL 8 RIB K-SECTION POLY RIB CRANKSHAFT PULLEY & ADAPTER
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
FOR USE WITH TRUNNION MOUNT FRONT SUPPORTS
AN ATTACHMENT
PULLEY GP-ALTERNATOR
321-7990 PULLEY GP-ALTERNATOR
321-7990 PULLEY GP-ALTERNATOR
S/N CG81-UP; MEL1-UP; SGT1-UP
PART OF 381-2023 AIR CONDITIONER AR
AN ATTACHMENT
SUPPRESSION GP-SOUND
COVER GP-SOUND SUPPRESSION
348-8189 COVER GP-SOUND SUPPRESSION
348-8189 COVER GP-SOUND SUPPRESSION
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
460-4048 SUPPRESSION GP-SOUND
460-4048 SUPPRESSION GP-SOUND
S/N CG81-UP; MEL1-UP; SGT1-UP
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
349-1527 COVER GP-VALVE MECHANISM
349-1527 COVER GP-VALVE MECHANISM
S/N SYE1-UP
PART OF 416-8790, 416-8791, 516-4053 ENGINE AR-COMPLETE
AN ATTACHMENT
ROCKER ARM GP
263-0033 ROCKER ARM GP
263-0033 ROCKER ARM GP -INTAKE
S/N SYE1-UP
PART OF 347-8760, 492-1194 VALVE MECHANISM GP
AN ATTACHMENT
ROCKER ARM GP
347-8782 ROCKER ARM GP
347-8782 ROCKER ARM GP
S/N SYE1-UP
PART OF 492-1194 VALVE MECHANISM GP
AN ATTACHMENT
VALVE MECHANISM GP
347-8760 VALVE MECHANISM GP
347-8760 VALVE MECHANISM GP
S/N SYE1-UP
PART OF 348-9896 VALVE MECHANISM GP
AN ATTACHMENT
VALVE MECHANISM GP
348-9896 VALVE MECHANISM GP
348-9896 VALVE MECHANISM GP
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
Type 1
AN ATTACHMENT
VALVE MECHANISM GP
348-9896 VALVE MECHANISM GP
348-9896 VALVE MECHANISM GP
S/N SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
Type 2
AN ATTACHMENT
VALVE MECHANISM GP
492-1194 VALVE MECHANISM GP
492-1194 VALVE MECHANISM GP
S/N SYE1-UP
PART OF 348-9896 VALVE MECHANISM GP
AN ATTACHMENT
YOKE GP
YOKE GP
224-2693 YOKE GP
224-2693 YOKE GP
S/N CG81-UP; MEL1-UP; SGT1-UP
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT

Information:

(For parts list, see above)

Disassembly and Assembly
Air Compressor - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Belt Tensioner - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Belt Tightener - Remove and Install
D6T Track-Type Tractor Engine Supplement
Systems Operation
Compression Brake
C9.3 Tier 4 Final Engines
Testing and Adjusting
Compression Brake Lash - Adjust
C9.3 Tier 4 Final Engines
Troubleshooting
Retarder - Test
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Compression Brake - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Compression Brake - Disassemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines
Compression Brake - Assemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Camshaft - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Service Magazine
Cat<SUP>&reg;</SUP> Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25
Specifications
Refrigerant Compressor
D6T Track-Type Tractor Systems
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C9.3 Tier 4 Final Engines
Main Bearings - Inspect
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Bearing Clearance - Check
C9.3 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Crankshaft - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Crankshaft Front Seal and Wear Sleeve - Remove and Install
D6T Track-Type Tractor Engine Supplement
Service Magazine
Improved Crankshafts are Now Used on Certain Cat<SUP>&reg;</SUP> Products {1202}
Improved Crankshafts are Now Used on Certain Cat® Products {1202}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C9.3 Tier 4 Final Engines
Excessive Bearing Wear - Inspect
C9.3 Tier 4 Final Engines
Main Bearings - Inspect
C9.3 Tier 4 Final Engines
Cylinder Liner Projection - Inspect
C9.3 Tier 4 Final Engines
Troubleshooting
Crankcase Pressure Is High
C9.3 Tier 4 Final Engines
Crankcase Pressure Is Low
C9.3 Tier 4 Final Engines
Cylinder Is Noisy
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Bearing Clearance - Check
C9.3 Engines for Caterpillar Built Machines
Cylinder Block Cover - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Cylinder Liner - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Valve Lash - Check/Adjust
D6T Track-Type Tractor
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Rocker Arm and Shaft - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C9.3 Engines for Caterpillar Built Machines
Cylinder Head - Install
C9.3 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Crankshaft Vibration Damper and Pulley - Remove and Install
D6T Track-Type Tractor Engine Supplement
Operation and Maintenance Manual
Belt - Inspect/Replace
D6T Track-Type Tractor
Specifications
Pressure Switch (Refrigerant)
D6T Track-Type Tractor Systems
Disassembly and Assembly
Fan Drive Mounting Group - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Flywheel - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C9.3 Tier 4 Final Engines
Flywheel Housing - Inspect
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Housing (Front) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Engine Front Support - Remove and Install
D6T Track-Type Tractor Engine Supplement
Operation and Maintenance Manual
Engine Oil Level - Check
D6T Track-Type Tractor
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Engine Oil Pan - Remove and Install
D6T Track-Type Tractor Engine Supplement
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C9.3 Tier 4 Final Engines
Cylinder Liner Projection - Inspect
C9.3 Tier 4 Final Engines
Engine Crankcase Pressure (Blowby) - Test
C9.3 Tier 4 Final Engines
Piston Ring Groove - Inspect
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Bearing Clearance - Check
C9.3 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C9.3 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C9.3 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C9.3 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C9.3 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Remove
C9.3 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Install
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Belt Tightener - Remove and Install
D6T Track-Type Tractor Engine Supplement
Crankshaft Vibration Damper and Pulley - Remove and Install
D6T Track-Type Tractor Engine Supplement
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt - Inspect/Replace
D6T Track-Type Tractor
Testing and Adjusting
Belts - Adjust - If Equipped
C9.3 Tier 4 Final Engines
Operation and Maintenance Manual
Engine Valve Lash - Check/Adjust
D6T Track-Type Tractor
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C9.3 Tier 4 Final Engines
Engine Valve Lash - Inspect/Adjust
C9.3 Tier 4 Final Engines
Troubleshooting
Valve Lash Is Excessive
C9.3 Tier 4 Final Engines
Valve Rotator or Spring Lock Is Free
C9.3 Tier 4 Final Engines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Compression Brake - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Compression Brake - Disassemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines
Compression Brake - Assemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
C9.3 Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C9.3 Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Service Magazine
New Rocker Arm Is Now Used on Certain Cat<SUP>&reg;</SUP> Products {1123}
New Rocker Arm Is Now Used on Certain Cat® Products {1123}
Improved Rocker Arm Assembly is Now Used on Certain C9.3 Machine Engines {1123}
Improved Rocker Arm Assembly is Now Used on Certain C9.3 Machine Engines {1123}
Technical Information Bulletin
Valve Cover Leaks on Certain C9.3 Machine Engines {1107}
Valve Cover Leaks on Certain C9.3 Machine Engines {1107}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.