AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

453-5357 CYLINDER GP-BULLDOZER LIFT S/N SGT1-UP 102-MM (4-IN) BORE X 1262-MM (49.7-IN) STROKE PART OF 456-0246 CYLINDER & LINES GP-LIFT AN ATTACHMENT D6T XW


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
LINES GP-HYDRAULIC FAN

TRACK-TYPE TRACTOR D6T XW TRACK-TYPE TRACTOR CG8
 D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering CG800001-UP (MACHINE) POWERED BY C9.3 Engine SEBP7226 D6T XW CG8   (2014)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BULLDOZER LIFT
349-6046 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
385-4672 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
453-5357 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
453-5358 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
384-5351 CYLINDER GP-RIPPER
CYLINDER GP-TILT
367-9478 CYLINDER GP-TILT
 

#SEBP72260850
 

453-5357: CYLINDER GP-BULLDOZER LIFT

453-5357 CYLINDER GP-BULLDOZER LIFT
S/N SGT1-UP
102-MM (4-IN) BORE X 1262-MM (49.7-IN) STROKE
PART OF 456-0246 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
i06239360 SEBP7226
4535357 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-6830 [1] RING-BACKUP  
2. 4J-0121 [1] CAP AS-BEARING  
3. 6J-2797 [1] RING-WEAR  
4. 8E-9212 B [26] SHIM (0.8-MM THK)  
5. 8T-0785 [1] RING-WEAR  
6. 9X-4611 [1] SEAL-O-RING  
7. 119-7843 [1] SEAL-O-RING  
8. 172-9981 [1] HEAD  
9. 217-3312 [1] MAGNET  
10. 225-3281 [1] SEAL-WIPER  
11. 289-2937 [1] SEAL AS-BUFFER  
12. 289-2948 [1] SEAL-U-CUP  
13. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
14. 453-4760 [1] PISTON AS  
15. 453-5354 [1] ROD AS  
16. 453-5361 [1] CYLINDER AS  
16A. 4J-6374 [2] BUSHING  
16B. 9T-8958 [1] TRUNNION  
17. 453-5364 Y [1] SENSOR GP-POSITION (BULLDOZER LIFT)  
18. 095-9806 M [3] BOLT-SOCKET HEAD (M16X2X80-MM)  
19. 5S-4455 [1] RING-RETAINING  
20. 6V-7742 M [4] NUT-FULL (M20X2.5-THD)  
21. 8T-0362 M [4] BOLT (M20X2.5X110-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72260851
 

453-5358: CYLINDER GP-BULLDOZER LIFT

453-5358 CYLINDER GP-BULLDOZER LIFT
S/N CG81-UP; MEL1-UP
102-MM (4-IN) BORE X 1262-MM (49.7-IN) STROKE
PART OF 456-2552, 456-4208 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
i06239381 SEBP7226
4535358 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-6830 [1] RING-BACKUP  
2. 4J-0121 [1] CAP AS-BEARING  
3. 6J-2797 [1] RING-WEAR  
4. 8E-9212 B [26] SHIM (0.8-MM THK)  
5. 8T-0785 [1] RING-WEAR  
6. 9X-4611 [1] SEAL-O-RING  
7. 119-7843 [1] SEAL-O-RING  
8. 172-9981 [1] HEAD  
9. 217-3312 [1] MAGNET  
10. 225-3281 [1] SEAL-WIPER  
11. 289-2937 [1] SEAL AS-BUFFER  
12. 289-2948 [1] SEAL-U-CUP  
13. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
14. 453-4760 [1] PISTON AS  
15. 453-5354 [1] ROD AS  
16. 453-5360 [1] CYLINDER AS  
16A. 4J-6374 [2] BUSHING  
16B. 9T-8958 [1] TRUNNION  
17. 453-5364 Y [1] SENSOR GP-POSITION (BULLDOZER LIFT)  
18. 095-9806 M [3] BOLT-SOCKET HEAD (M16X2X80-MM)  
19. 5S-4455 [1] RING-RETAINING  
20. 6V-7742 M [4] NUT-FULL (M20X2.5-THD)  
21. 8T-0362 M [4] BOLT (M20X2.5X110-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72260852
 

384-5351: CYLINDER GP-RIPPER

384-5351 CYLINDER GP-RIPPER -LIFT
S/N RTZ1-UP
130-MM (5.2-IN) BORE X 405.5-MM (16-IN) STROKE
PART OF 387-1087 RIPPER AR
AN ATTACHMENT
i05919904 SEBP7226
3845351 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-5731 [1] LOCKNUT (1-3/4-12-THD)  
2. 8C-9200 [1] RING-WEAR  
3. 118-4019 [1] RING  
4. 266-9397 [1] PISTON  
5. 278-2324 [1] SEAL-WIPER  
6. 355-4712 [1] HEAD  
7. 384-8724 [1] CYLINDER AS  
8. 384-8725 [1] ROD AS  
9. 167-2235 [1] SEAL AS-BUFFER  
10. 167-2299 [1] SEAL-U-CUP  
11. 175-7903 [1] SEAL-O-RING  
12. 175-7904 [1] SEAL-O-RING  
13. 2K-4096 [1] RING-BACKUP  
14. 495-8200 [1] RING AS-SEAL  
 

#SEBP72260853
 

367-9478: CYLINDER GP-TILT

367-9478 CYLINDER GP-TILT
S/N CG81-UP; MEL1-UP; SGT1-UP
165.1-MM (6.5-IN) BORE X 128-MM (5-IN) STROKE. BULLDOZER
PART OF 387-8316, 387-8365, 430-4707, 433-0327, 444-2268 PUSH ARM GP
AN ATTACHMENT
i05306871 SEBP7226
3679478 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-0564 [1] LOCKNUT (2-12-THD)  
2. 5J-4991 [1] SEAL AS  
3. 8E-5703 B [24] SHIM (0.8-MM THK)  
4. 8J-2880 [1] CAP AS-BEARING  
5. 233-9135 [1] CYLINDER AS  
5A. 2J-8489 [1] BEARING  
6. 233-9138 [1] HEAD-CYLINDER  
7. 312-4247 [1] SEAL-WIPER  
8. 312-4248 [1] SEAL AS-BUFFER  
9. 364-4416 [1] ROD AS  
  3J-6572 B [14] SHIM (0.5-MM THK)  
10. 367-9479 [1] PISTON  
11. 312-4245 [1] SEAL-U-CUP  
12. 3J-9703 [1] RING-WEAR  
13. 6V-7742 M [4] NUT-FULL (M20X2.5-THD)  
14. 6V-8133 M [4] BOLT (M24X3X80-MM)  
15. 6V-8237 [4] WASHER (26X44X4-MM THK)  
16. 6V-9167 M [4] BOLT (M20X2.5X140-MM)  
17. 7J-8955 [1] RING-BACKUP  
18. 7J-8956 [1] SEAL-O-RING  
19. 8T-8379 [1] SEAL-HEAD  
20. 9T-0094 [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  244-0980 [1] KIT-SEAL (TILT CYLINDER)  
    (INCLUDES RINGS & SEALS)
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP72260854
 

382-4100: HYDRAULIC AR

382-4100 HYDRAULIC AR
S/N CG81-UP; MEL1-UP; SGT1-UP
PART OF 381-2603 COMMON AR
AN ATTACHMENT
i05933444 SEBP7226
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  229-5421 Y [1] ADAPTER GP-MOTOR  
  382-4120 Y [1] LINES GP-HYDRAULIC FAN  
  382-4110 Y [1] LINES GP-LIFT CYLINDER  
  382-4130 Y [1] LINES GP-PILOT  
  382-4150 Y [1] LINES GP-PUMP  
  382-4140 Y [1] LINES GP-STEERING  
  325-9776 Y [1] MOTOR GP-PISTON (STEERING)  
  325-0072 Y [1] PUMP & MTG GP-STEERING  
  325-0073 Y [1] TANK & MTG GP-HYDRAULIC  
  382-4220 Y [1] VALVE GP-QUICK-DROP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP72260855
 

382-4202: HYDRAULIC AR

382-4202 HYDRAULIC AR -FAN
S/N CG81-UP; MEL1-UP; SGT1-UP
LOW SPEED
PART OF 488-1365 COMMON AR, 498-9593 DISTRIBUTION AR, 460-2890, 460-2891 MERCHANDISE AR
AN ATTACHMENT
i05915854 SEBP7226
3824202 HYDRAULIC AR Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-6089 [1] PLUG (ROCKER SWITCH)  
2. 382-4108 Y [1] LINES GP-HYDRAULIC FAN  
3. 392-0919 Y [1] WIRING GP-FAN  
4. 425-1596 Y [1] MOTOR GP-PISTON (HYDRAULIC FAN)  
5. 344-5675 M [1] NUT (M10X1.5-THD)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
8. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
9. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 9X-8281 M [1] STUD-TAPERLOCK (M10X1.5X45-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP72260856
 

382-4203: HYDRAULIC AR

382-4203 HYDRAULIC AR -REVERSING FAN
S/N CG81-UP; MEL1-UP; SGT1-UP
LOW SPEED
PART OF 460-2871 WASTE HANDLING AR
AN ATTACHMENT
i05915870 SEBP7226
3824203 HYDRAULIC AR Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-4623 [1] SWITCH AS-ROCKER (24-VOLT)(REVERSING FAN)  
2. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 382-4109 Y [1] LINES GP-HYDRAULIC FAN  
4. 392-0919 Y [1] WIRING GP-FAN  
5. 425-1597 Y [1] MOTOR GP-PISTON (REVERSING FAN)(REVERSING FAN)  
6. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
  338-8518 FJ [1] CONFIGURATION-PREMIUM  
  F   NOT SHOWN
  J   DLR INSTALL CONFIG: SEE IRM: EE S03-01
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP72260857
 

382-4108: LINES GP-HYDRAULIC FAN

382-4108 LINES GP-HYDRAULIC FAN
S/N CG81-UP; MEL1-UP; SGT1-UP
LOW SPEED
PART OF 382-4202 HYDRAULIC AR
AN ATTACHMENT
i05915863 SEBP7226
3824108 LINES GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 382-4105 [1] BRACKET AS  
2. 382-4262 I [1] HOSE AS  
3. 382-4263 I [1] HOSE AS  
4. 388-5493 Y [1] MANIFOLD GP-CONTROL (LOW FAN SPEED)  
5. 490-3701 I [1] HOSE AS  
6. 148-8322 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8640 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
7. 148-8388 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8629 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
8. 8T-1897 [3] CLIP (SLOT)  
9. 8T-1898 [3] CLIP (TAB)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
12. 259-7140 M [1] STUD-TAPERLOCK (M10X1.5X80-MM)  
13. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
14. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
17. 8T-6912 M [2] BOLT (M8X1.25X50-MM)  
18. 9R-2216 [1] BOSS  
19. 344-5675 M [1] NUT (M10X1.5-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72260858
 

382-4109: LINES GP-HYDRAULIC FAN

382-4109 LINES GP-HYDRAULIC FAN -REVERSING
S/N CG81-UP; MEL1-UP; SGT1-UP
LOW SPEED
PART OF 382-4203 HYDRAULIC AR
Type 1
AN ATTACHMENT
i05915884 SEBP7226
3824109 LINES GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-2191 Y [1] VALVE GP-FAN REVERSING  
2. 382-4060 I [1] HOSE AS  
3. 382-4099 [1] PLATE  
4. 382-4105 [1] BRACKET AS  
5. 382-4135 I [1] HOSE AS  
6. 382-4259 I [1] HOSE AS  
7. 382-4263 I [1] HOSE AS  
8. 388-5493 Y [1] MANIFOLD GP-CONTROL (LOW FAN SPEED)  
9. 447-7166 I [1] HOSE AS  
10. 133-7810 M [2] STUD-TAPERLOCK (M10X1.5X45-MM)  
11. 148-8315 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8642 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
12. 148-8322 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8640 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
13. 148-8327 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
14. 148-8392 [1] ELBOW AS  
  6V-9746 [1] SEAL-O-RING  
  6V-9853 [1] ELBOW  
15. 344-5675 M [2] NUT (M10X1.5-THD)  
16. 6V-1889 [1] CLIP (LOOP)  
17. 7G-3832 [1] GROMMET  
18. 7G-3833 [1] CLIP (TAB)  
19. 7G-3834 [1] CLIP (SLOT)  
20. 8T-1895 [1] CLIP (SLOT)  
21. 8T-1896 [1] CLIP (TAB)  
22. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
24. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
25. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
26. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
27. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
29. 8T-6912 M [2] BOLT (M8X1.25X50-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72260859
 

382-4109: LINES GP-HYDRAULIC FAN

382-4109 LINES GP-HYDRAULIC FAN -REVERSING
S/N CG81-UP; MEL1-UP; SGT1-UP
LOW SPEED
PART OF 382-4203 HYDRAULIC AR
Type 2
AN ATTACHMENT
i06071254 SEBP7226
3824109 LINES GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your D6T XW TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-2191 Y [1] VALVE GP-FAN REVERSING  
2. 382-4099 [1] PLATE  
3. 382-4105 [1] BRACKET AS  
4. 382-4135 I [1] HOSE AS  
5. 382-4263 I [1] HOSE AS  
6. 388-5493 Y [1] MANIFOLD GP-CONTROL (LOW FAN SPEED)  
7. 468-0025 C [1] BRACKET AS  
8. 468-1070 CI [1] HOSE AS  
9. 468-1071 CI [1] HOSE AS  
10. 487-5289 I [1] HOSE AS  
11. 148-8315 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8642 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
12. 148-8322 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8640 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
13. 148-8327 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
14. 148-8392 [1] ELBOW AS  
  6V-9746 [1] SEAL-O-RING  
  6V-9853 [1] ELBOW  
15. 344-5674 CM [1] NUT (M8X1.25-THD)  
16. 344-5675 M [3] NUT (M10X1.5-THD)  
17. 396-8704 CM [1] STUD (M10X1.5X30-MM)  
18. 7G-3832 [1] GROMMET  
19. 7G-3833 [1] CLIP (TAB)  
20. 7G-3834 [1] CLIP (SLOT)  
21. 8T-1895 [1] CLIP (SLOT)  
22. 8T-1896 [1] CLIP (TAB)  
23. 8T-1897 C [2] CLIP (SLOT)  
24. 8T-1898 C [2] CLIP (TAB)  
25. 8T-4121 C [12] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
27. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
28. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
29. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
30. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
32. 8T-6912 M [2] BOLT (M8X1.25X50-MM)  
33. 9X-8281 M [3] STUD-TAPERLOCK (M10X1.5X45-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Lift Cylinder Yoke Bearings - Lubricate
D6T Track-Type Tractor
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure for Checking the Sensor Inside a Position Sensing Cylinder (PSC) with Test Box on Certain Track-Type Tractors {0785, 1408, 5102}
Procedure for Checking the Sensor Inside a Position Sensing Cylinder (PSC) with Test Box on Certain Track-Type Tractors {0785, 1408, 5102}
Specifications
Lift Cylinder (Bulldozer) - No Position Sensor
D6T Track-Type Tractor Systems
Ripper Lift Cylinder
D6T Track-Type Tractor Systems
Lift Cylinder (Bulldozer) - No Position Sensor
D6T Track-Type Tractor Systems
Tilt Cylinder (Bulldozer) - No Position Sensor
D6T Track-Type Tractor Systems
Cylinder Mounting
D6T Track-Type Tractor Systems
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Operational Checks
D6T Track-Type Tractor Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bulldozer Lift Cylinder Mounts - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder - Remove and Install
D6T Track-Type Tractor Machine Systems
Ripper Lift Cylinder - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Disassemble
D6T Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Assemble
D6T Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Remove and Install
D6T Track-Type Tractor Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/02/03

Caterpillar Parts SIS Catalog D6T XW :

CYLINDER GP-BULLDOZER LIFT
385-4672 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
349-6046 CYLINDER GP-BULLDOZER LIFT
CYLINDER & LINES GP-LIFT
456-4208 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
456-2552 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
456-0246 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
382-4273 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
382-4272 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
382-4271 CYLINDER & LINES GP-LIFT
CYLINDER GP-BULLDOZER LIFT
453-5358 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
384-5351 CYLINDER GP-RIPPER
CYLINDER GP-TILT
367-9478 CYLINDER GP-TILT
382-4100 HYDRAULIC AR
HYDRAULIC AR
382-4202 HYDRAULIC AR
HYDRAULIC AR
382-4203 HYDRAULIC AR
LINES GP-HYDRAULIC FAN
382-4108 LINES GP-HYDRAULIC FAN
LINES GP-HYDRAULIC FAN
382-4109 LINES GP-HYDRAULIC FAN
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.