ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AID GP
STARTING MOTOR GP
SWITCH GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP72270400
373-5283: SENSOR GP-TEMPERATURE
373-5283 SENSOR GP-TEMPERATURE
S/N CR31-UP; SGA1-UP; STE1-UP
4 PIN ANALOG EXHAUST
PART OF 388-4261 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
4 PIN ANALOG EXHAUST
PART OF 388-4261 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP72270401
374-4768: SENSOR GP-TEMPERATURE
374-4768 SENSOR GP-TEMPERATURE
S/N CR31-UP; SGA1-UP; STE1-UP
4 PIN ANALOG EXHAUST
PART OF 388-4261 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
4 PIN ANALOG EXHAUST
PART OF 388-4261 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP72270402
375-3211: STARTING AID GP-ETHER
375-3211 STARTING AID GP-ETHER
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 2. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 3. | 241-4194 | [1] | FITTING AS (CONTROL) | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 4. | 387-7832 | [1] | ATOMIZER GP-ETHER | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 5. | 396-7555 | [1] | BRACKET AS | |
| 6. | 396-7556 | [1] | BRACKET AS | |
| 7. | 396-7557 | [1] | BRACKET AS | |
| 8. | 1S-4305 | [1] | SPACER (0.531X1X0.56-IN THK) | |
| 9. | 6V-5839 | [4] | WASHER (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 11. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 12. | 8T-4189 M | [8] | BOLT (M8X1.25X20-MM) | |
| 13. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 174-9169 E | TUBE (23-CM) | ||
| 7N-0296 A | [1] | CYLINDER AS-ETHER (STARTING AID) | ||
| (MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72270403
349-6530: STARTING MOTOR GP-ELECTRIC
349-6530 STARTING MOTOR GP-ELECTRIC
S/N CR31-UP; SGA1-UP; STE1-UP
24-VOLT
PART OF 375-3232 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
24-VOLT
PART OF 375-3232 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-0326 | [1] | CONNECTOR | |
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
| 4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
| 5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 3T-3423 | [1] | CUP | ||
| 3T-3424 | [1] | PLUG-FELT | ||
| 9G-4101 | [1] | BUSHING-END | ||
| 8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS | |
| 11. | 2J-8163 | [2] | SEAL-O-RING | |
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 14. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 15. | 8C-3089 | [1] | SEAL-O-RING | |
| 16. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 17. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 18. | 7L-2894 | [4] | GASKET | |
| 19. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 20. | 4M-1854 | [1] | SHAFT-LEVER | |
| 21. | 1H-1023 | [1] | SEAL-O-RING | |
| 22. | 2D-6392 | [1] | SEAL-O-RING | |
| 23. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 24. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 25. | 2H-3429 | [1] | RING-RETAINING | |
| 26. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 27. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 28. | 6N-3279 | [1] | INSULATOR | |
| 29. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 30. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
| 31. | 1H-2629 | [3] | STRIP-INSULATION | |
| 32. | 7M-0324 | [1] | COIL AS-FIELD | |
| 33. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 34. | 7F-3488 | [6] | SHOE-POLE | |
| 35. | 7M-8651 | [1] | ARMATURE AS | |
| 36. | 7M-0325 | [1] | INSULATOR | |
| 37. | 3T-9524 | [6] | BRUSH AS | |
| 38. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| 40. | 3R-8801 | [1] | CLAMP | |
| 41. | 8F-1434 | [2] | LOCKWASHER | |
| 42. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 43. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 44. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 45. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 46. | 3T-9494 | [6] | SPRING | |
| 47. | 349-6255 | [1] | HOUSING AS | |
| 48. | 9G-4101 | [1] | BUSHING-END | |
| 49. | 3T-3424 | [3] | PLUG-FELT | |
| 50. | 3T-3423 | [3] | CUP | |
| 51. | 1M-9968 | [1] | BUSHING | |
| 52. | 2F-6678 | [1] | SEAL-LIP TYPE | |
| 53. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 54. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 55. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| 56. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 57. | 338-3453 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 3R-8801 | [1] | CLAMP | ||
| 58. | 352-7994 | [1] | KIT-SWITCH (RELAY, STARTER) | |
| (KIT INCLUDES STARTER RELAY SWITCH AS, JUMP START PROTECTION COVER, BOLTS, ANCHOR & CLAMP) | ||||
| 59. | 3T-3434 | [6] | PLUG | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72270404
375-3231: STARTING MOTOR GP-ELECTRIC
375-3231 STARTING MOTOR GP-ELECTRIC
S/N CR31-UP; SGA1-UP; STE1-UP
24-VOLT
CANNOT BE USED WITH @@@@@375-3232@@@@@
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
24-VOLT
CANNOT BE USED WITH @@@@@375-3232@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 086-9479 | [1] | CABLE AS | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8050 | CABLE (00-GA, BLACK)(31-CM) | |||
| 2. | 384-1838 Y | [1] | CABLE GP-STARTING MOTOR | |
| 3. | 389-5799 | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 423-9049 | [1] | SEAL-O-RING | ||
| 4. | 220-0771 M | [3] | BOLT-12 POINT HEAD (M16X2X45-MM) | |
| 5. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 6. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72270405
375-3232: STARTING MOTOR GP-ELECTRIC
375-3232 STARTING MOTOR GP-ELECTRIC -HEAVY-DUTY
S/N CR31-UP; SGA1-UP; STE1-UP
24-VOLT
PART OF 460-2883 COLD WEATHER AR
CANNOT BE USED WITH @@@@@375-3231@@@@@
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
24-VOLT
PART OF 460-2883 COLD WEATHER AR
CANNOT BE USED WITH @@@@@375-3231@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 313-3516 | [1] | HARNESS AS-SWITCH (STARTER)(STARTING MOTOR, START RELAY) | |
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 2. | 9Y-6089 | [1] | GASKET | |
| 3. | 086-9479 | [1] | CABLE AS | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(31-CM) | |||
| 4. | 349-6530 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 5. | 384-1839 Y | [1] | CABLE GP-STARTING MOTOR | |
| 6. | 220-0771 M | [3] | BOLT-12 POINT HEAD (M16X2X45-MM) | |
| 7. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 8. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72270406
284-8381: SWITCH AS-TOGGLE
284-8381 SWITCH AS-TOGGLE
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 382-6045 BATTERY & WIRING GP, 392-5126, 392-5406, 392-5418, 426-5277, 426-5278 LIGHTING GP-FLOOD
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 382-6045 BATTERY & WIRING GP, 392-5126, 392-5406, 392-5418, 426-5277, 426-5278 LIGHTING GP-FLOOD
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP72270407
417-2619: SWITCH GP-DISCONNECT
417-2619 SWITCH GP-DISCONNECT
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 460-2863 MERCHANDISE AR
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 460-2863 MERCHANDISE AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP72270408
7N-0718: SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 417-2619 SWITCH GP-DISCONNECT
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 417-2619 SWITCH GP-DISCONNECT
AN ATTACHMENT
For full view, you need register
#SEBP72270409
241-8368: SWITCH GP-MAGNETIC
241-8368 SWITCH GP-MAGNETIC
S/N CR31-UP; SGA1-UP; STE1-UP
24-VOLT
PART OF 382-6045 BATTERY & WIRING GP
AN ATTACHMENT
S/N CR31-UP; SGA1-UP; STE1-UP
24-VOLT
PART OF 382-6045 BATTERY & WIRING GP
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
Cat<SUP>®</SUP> Grade Control Calibration and Measure-Up Procedure for Certain Track-Type Tractors {7220}
Cat® Grade Control Calibration and Measure-Up Procedure for Certain Track-Type Tractors {7220}
Cat® Grade Control Calibration and Measure-Up Procedure for Certain Track-Type Tractors {7220}
Set-Up and Measure-Up Process of a Universal Total Station (UTS) for Cat<SUP>®</SUP> Grade Control {7220}
Set-Up and Measure-Up Process of a Universal Total Station (UTS) for Cat® Grade Control {7220}
Set-Up and Measure-Up Process of a Universal Total Station (UTS) for Cat® Grade Control {7220}
Specifications
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Temperature Sensor (Catalyst Inlet) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Pressure Sensor (ARD Combustion Air) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
D6T Track-Type Tractor Engine Supplement
D6T Track-Type Tractor Engine Supplement
Service Magazine
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
Improvements to Global Positioning System (GPS) Antenna is Now Used for Certain Cat<SUP>®</SUP> Products {7220, 733B, 7347}
Improvements to Global Positioning System (GPS) Antenna is Now Used for Certain Cat® Products {7220, 733B, 7347}
Improvements to Global Positioning System (GPS) Antenna is Now Used for Certain Cat® Products {7220, 733B, 7347}
