AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

296-3008 LIFT GP-BLADE S/N B941-UP PART OF 460-2330 COMMON AR ALSO AN ATTACHMENT 14L MOTOR GRADER


WORK TOOLS
BLADE GP
HYDRAULIC SYSTEM
LIFT GP
WORK TOOLS
RIPPER GP
FRAME AND BODY
FRAME GP
WORK TOOLS
RIPPER GP
SCARIFIER GP
GROUND ENGAGING TOOLS (G.E.T.)

MOTOR GRADER 14L MOTOR GRADER B94
 14L Motor Grader - All Wheel Drive B9400001-UP (MACHINE) POWERED BY C9 Engine SEBP7267 14L B94   (2014)

WORK TOOLS

BLADE GP
524-8603 EXTENSION GP-BLADE
524-8604 EXTENSION GP-BLADE
LIFT GP-BLADE
296-3008 LIFT GP-BLADE
 

#SEBP72670810
 

296-3008: LIFT GP-BLADE

296-3008 LIFT GP-BLADE
S/N B941-UP
PART OF 460-2330 COMMON AR
ALSO AN ATTACHMENT
i03304403 SEBP7267
2963008 LIFT GP-BLADE Parts scheme 2963008 LIFT GP-BLADE Parts scheme 2963008 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 381-0356 [1] BAR AS-LINK  
9A. 8X-5108 [2] BUSHING  
9B. 382-4604 [7] BUSHING  
10. 123-8187 B [6] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 8T-0558 M [4] BOLT-SELF-LOCKING (M12X1.75X50-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 296-3004 [1] ARM AS-LIFT (LH)  
15A. 7D-8889 [1] BEARING (76.35-MM ID)  
15B. 8D-8168 [1] BEARING (63.65-MM ID)  
16. 296-3005 [1] ARM AS-LIFT (RH)  
16A. 7D-8889 [1] BEARING (76.35-MM ID)  
16B. 8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
24. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4131 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
33. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP72670811
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N B941-UP
PART OF 312-2204 LIFT GP-WORK TOOL
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
AN ATTACHMENT
i05382843 SEBP7267
2935556 LIFT GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
   
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
17. 195-3330 [1] PLATE AS-MOUNTING  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP72670812
 

312-2204: LIFT GP-WORK TOOL

312-2204 LIFT GP-WORK TOOL
S/N B941-UP
FOR USE WITH @@@@@365-3354@@@@@, @@@@@365-3355@@@@@, @@@@@365-3368@@@@@, @@@@@365-3369@@@@@
CANNOT BE USED WITH @@@@@309-6809@@@@@, @@@@@351-5178@@@@@, @@@@@367-6842@@@@@
AN ATTACHMENT
i02788354 SEBP7267
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5556 Y [1] LIFT GP-WORK TOOL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72670813
 

332-2282: MOUNTING GP-RIPPER

332-2282 MOUNTING GP-RIPPER
S/N B941-UP
PART OF 324-0889 RIPPER AR
AN ATTACHMENT
i03921213 SEBP7267
3322282 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)  
3. 6P-5647 [2] BOSS  
4. 104-4523 [2] CAM AS  
5. 293-2476 [2] PIN  
6. 332-2284 [2] LINK AS  
7. 332-7384 [1] PLATE AS  
8. 106-4175 M [8] BOLT (M20X2.5X60-MM)  
9. 114-6099 M [6] BOLT (M24X3X80-MM)  
10. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
11. 267-3507 [6] WASHER-HARD (26X47X12-MM THK)  
12. 283-1578 [8] WASHER-HARD (22X45X10-MM THK)  
13. 7X-2544 M [2] BOLT (M10X1.5X140-MM)  
14. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 8T-6685 M [2] BOLT (M10X1.5X110-MM)  
17. 9W-7469 [2] PIN  
18. 9W-7470 [2] PIN  
  M   METRIC PART
 

#SEBP72670814
 

360-5080: MOUNTING GP-SNOW WING

360-5080 MOUNTING GP-SNOW WING
S/N B941-UP
PART OF 390-9182 OPTION AR-MACHINE
AN ATTACHMENT
i04047558 SEBP7267
3605080 MOUNTING GP-SNOW WING Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-6731 [1] PLATE AS  
2. 284-8931 [1] PLATE-MOUNTING  
3. 379-5657 [1] PLATE (LH)  
4. 379-5658 [1] PLATE (RH)  
5. 495-9537 [1] PLATE (LH)  
6. 495-9536 [1] PLATE (RH)  
7. 385-5267 [1] PLATE  
 

#SEBP72670815
 

324-0889: RIPPER AR

324-0889 RIPPER AR
S/N B941-UP
PART OF 510-6895 DISTRIBUTION AR
FOR USE WITH @@@@@365-3355@@@@@
CANNOT BE USED WITH @@@@@337-7510@@@@@, @@@@@393-4882@@@@@
AN ATTACHMENT
i03921231 SEBP7267
3240889 RIPPER AR Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 325-3355 Y [1] RIPPER GP  
2. 326-2227 Y [1] CYLINDER GP-RIPPER  
3. 332-2282 Y [1] MOUNTING GP-RIPPER  
4. 334-8069 Y [1] LINES GP-RIPPER (REAR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72670816
 

325-3355: RIPPER GP

325-3355 RIPPER GP
S/N B941-UP
PART OF 324-0889 RIPPER AR
AN ATTACHMENT
i03921177 SEBP7267
3253355 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0703 [1] BAR  
2. 4K-3150 [2] PIN  
3. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
4. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
5. 325-3354 [1] CARRIAGE AS  
6. 332-2295 [1] LINK AS-LOWER  
7. 332-6143 [1] LINK & BEARING AS (RH)  
  3G-2581 [2] BEARING  
  325-3353 [1] LINK AS  
8. 332-6144 [1] LINK & BEARING AS (LH)  
  3G-2581 [2] BEARING  
  332-6145 [1] LINK AS  
9. 334-7584 [1] PIN  
10. 342-2107 [2] TRUNNION AS  
    (EACH INCLUDES)
10A. 332-2297 [1] BUSHING  
  4K-3004 [1] BEARING-TRUNNION SUPPLEMENTARY  
11. 2D-0626 [8] SEAL  
12. 5M-6214 [2] PLUG (1/8-27 PTF)  
13. 6V-7687 M [10] LOCKNUT (M12X1.75-THD)  
14. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
15. 7K-9203 [8] SEAL-LIP TYPE  
16. 7K-9205 [2] SEAL-LIP TYPE  
17. 8J-7008 [2] PIN  
18. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
19. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
20. 8T-4648 M [1] BOLT (M12X1.75X70-MM)  
21. 8T-4910 M [7] BOLT (M12X1.75X60-MM)  
22. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72670817
 

310-9425: SCARIFIER AR

310-9425 SCARIFIER AR -VEE TYPE
S/N B941-UP
PART OF 364-2034 OPTION AR-SCARIFIER
AN ATTACHMENT
i03101749 SEBP7267
3109425 SCARIFIER AR Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2913 Y [1] CYLINDER & MTG GP-SCARIFIER  
2. 310-9428 Y [1] SCARIFIER GP (VEE TYPE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72670818
 

310-9428: SCARIFIER GP

310-9428 SCARIFIER GP -VEE TYPE
S/N B941-UP
11-TEETH
PART OF 310-9425 SCARIFIER AR
AN ATTACHMENT
i03101762 SEBP7267
3109428 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0386 [2] BOLT (7/8-9X3.5-IN)  
3. 2G-4332 [1] BLOCK AS-SCARIFIER  
  7D-8825 [11] SPACER  
  7D-8826 [11] SPACER  
4. 6K-3632 [4] LOCKNUT (1-8-THD)  
5. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
6. 7X-0450 [4] NUT-FULL (1-1/8-7-THD)  
7. 4D-6086 [2] KEY  
8. 5B-0577 [2] COLLAR  
9. 5D-8159 [2] PIN AS  
10. 5K-1458 [11] GROMMET  
11. 5K-1459 [11] LOCK PIN  
12. 6B-3260 [1] TOOL  
13. 6F-6992 [4] CAP-BALL SOCKET  
14. 6Y-5230 [11] TOOTH-SCARIFIER  
15. 7D-2196 [2] SLEEVE AS-LINK  
    (EACH INCLUDES)
  7D-2136 [1] SOCKET-BALL  
16. 7F-1327 B [32] SHIM (0.03-IN THK)  
17. 8D-1268 [2] ARM AS-LIFT  
    (EACH INCLUDES)
  7D-8245 [1] STUD-BALL  
18. 7X-0443 [4] BOLT (1-8X5.5-IN)  
19. 7X-0423 [4] BOLT (1-1/8-7X4.5-IN)  
20. 8W-0663 [2] BRACKET AS  
    (EACH INCLUDES)
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  107-8374 [2] BEARING  
21. 8X-6075 [1] BOLSTER AS  
22. 9D-5516 [2] LINK AS-LIFT  
    (EACH INCLUDES)
  7D-2135 [1] SOCKET-BALL  
23. 107-8375 [1] SHAFT AS  
24. 118-7880 [1] DRAWBAR AS  
  2G-7728 [2] COLLAR  
  8W-5597 [1] STUD-BALL  
25. 118-7881 [1] DRAWBAR AS  
  2G-7728 [2] COLLAR  
  8W-5597 [1] STUD-BALL  
26. 195-7218 [11] SHANK  
27. 198-9811 B [16] SPACER (83X145X3-MM THK)  
28. 198-9812 B [3] SPACER (83X145X2-MM THK)  
29. 8T-8924 [8] BOLT (3/4-10X2.5-IN)  
30. 8C-8842 [4] BOLT (3/4-10X4-IN)  
31. 6V-8188 [2] NUT (1/2-13-THD)  
32. 330-6877 [1] SHAFT  
33. 6V-8182 [4] NUT (3/4-10-THD)  
34. 282-0882 [4] WASHER-HARD (33X56X6-MM THK)  
35. 5D-8161 [2] PIN  
36. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 8T-4994 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
38. 8T-5361 [8] WASHER-HARD (28X49X5-MM THK)  
39. 6K-0545 [6] LOCKNUT (7/8-9-THD)  
40. 7X-0390 [4] BOLT (7/8-9X5-IN)  
41. 8C-6913 [4] WASHER-HARD (24X41.5X4-MM THK)  
42. 6C-9149 [8] WASHER (22X50X10-MM THK)  
43. 7X-0328 [2] BOLT (1/2-13X3.5-IN)  
  B   USE AS REQUIRED
 

#SEBP72670819
 

8J-1434: TOOTH GP-RIPPER

8J-1434 TOOTH GP-RIPPER -STRAIGHT
S/N B941-UP
PART OF 325-3355 RIPPER GP
AN ATTACHMENT
i00125368 SEBP7267
8J1434 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 14L MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5325 [2] PIN-COTTER  
2. 2K-6413 [1] PIN  
3. 9J-6586 [1] SHANK  
4. 136-8308 [1] PIN  
5. 6Y-0309 [1] TIP-RIPPER (PENETRATION)  
6. 114-0359 [1] RETAINER AS  
 

Information:

Operation and Maintenance Manual
Moldboard Blade
14L Motor Grader
Moldboard Wear Strip - Inspect/Adjust/Replace
14L Motor Grader
Specifications
Blade Lift
14L Motor Grader Machine Systems
Blade Lift
14L Motor Grader Machine Systems
Systems Operation
Blade Cushion - If Equipped
14L Motor Grader Hydraulic and Steering System
Disassembly and Assembly
Blade - Remove and Install
14L Motor Grader
Machine Systems
Blade Lift Arm - Remove
14L Motor Grader
Machine Systems
Blade Lift Arm - Install
14L Motor Grader
Machine Systems

Caterpillar Parts SIS Catalog 14L :

524-8604 EXTENSION GP-BLADE
524-8603 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3132 EXTENSION GP-BLADE
EXTENSION GP-BLADE
243-6685 EXTENSION GP-BLADE
EDGE-CUTTING
489-6705 EDGE-CUTTING
233-7147 EDGE GP-CUTTING
233-7143 EDGE GP-CUTTING
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
312-2204 LIFT GP-WORK TOOL
MOUNTING GP-RIPPER
332-2282 MOUNTING GP-RIPPER
MOUNTING GP-SNOW WING
360-5080 MOUNTING GP-SNOW WING
RIPPER AR
324-0889 RIPPER AR
RIPPER GP
325-3355 RIPPER GP
SCARIFIER AR
310-9425 SCARIFIER AR
SCARIFIER GP
310-9428 SCARIFIER GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.