AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

390-9852 CIRCLE GP S/N E9Y1-368 PART OF 479-7656 IMPLEMENT AR, 370-2227 SPECIAL AR ALSO AN ATTACHMENT 16M3


IMPLEMENTS
CIRCLE GP
DRAWBAR GP
MACHINE ARRANGEMENT
MACHINE AR
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
AIR CONDITIONER GP
SEAT GP

MOTOR GRADER 16M3 MOTOR GRADER E9Y
 16M Series 3 Motor Grader E9Y00001-UP (MACHINE) POWERED BY C13 Engine SEBP7270 16M3 E9Y   (2015)

IMPLEMENTS

CIRCLE GP
CIRCLE & BEAM AS
390-9853 CIRCLE & BEAM AS
CIRCLE GP
390-9852 CIRCLE GP
CIRCLE GP
390-9852 CIRCLE GP
 

#SEBP72700660
 

390-9852: CIRCLE GP

390-9852 CIRCLE GP
S/N E9Y1-368
PART OF 479-7656 IMPLEMENT AR, 370-2227 SPECIAL AR
ALSO AN ATTACHMENT
i06061804 SEBP7270
3909852 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-4831 [2] SHAFT  
2. 449-1751 [4] RETAINER  
3. 253-4643 B [2] SHIM (2-MM THK)  
4. 449-1750 [4] RETAINER  
5. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 390-9853 Y [1] CIRCLE & BEAM AS  
7. 478-8991 [1] BRACKET AS  
8. 7X-0481 [12] BOLT (1/2-13X8-IN)  
9. 4J-1888 [4] PIN-COTTER  
10. 5F-3715 [4] NUT-SLOTTED HEX (2-12-THD)  
11. 7Y-0725 [8] WASHER-HARD (52X92X8-MM THK)  
12. 8W-4167 [8] BUSHING  
13. 446-1523 [4] STRIP-WEAR  
14. 253-4635 [2] PLATE AS  
15. 9X-0941 [12] LOCKNUT (1/2-13-THD)  
16. 2G-2946 B [4] SHIM (1.52-MM THK)  
17. 2G-2945 B [4] SHIM (0.76-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP72700661
 

390-9852: CIRCLE GP

390-9852 CIRCLE GP
S/N E9Y369-UP
PART OF 479-7656 IMPLEMENT AR, 370-2227 SPECIAL AR
ALSO AN ATTACHMENT
i07695098 SEBP7270
3909852 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 253-4635 [2] PLATE AS  
2. 253-4643 BC [22] SHIM (2-MM THK)  
3. 390-9853 Y [1] CIRCLE & BEAM AS  
4. 446-1523 [4] STRIP-WEAR  
5. 449-1750 [4] RETAINER  
6. 449-1751 [4] RETAINER  
7. 478-8991 [1] BRACKET AS  
8. 567-7552 C [2] PIN  
9. 567-7553 C [2] COLLAR  
10. 2G-2945 [4] SHIM (0.76-MM THK)  
11. 2G-2946 [4] SHIM (1.52-MM THK)  
12. 3B-8489 C [2] FITTING-GREASE (1/8-27 PTF)  
13. 7X-0481 [12] BOLT (1/2-13X8-IN)  
14. 8T-4173 CM [2] BOLT (M16X2X110-MM)  
15. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4778 CM [2] LOCKNUT (M16X2-THD)  
17. 8W-4167 [8] BUSHING  
18. 9X-0941 [12] LOCKNUT (1/2-13-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72700662
 

425-8674: DRAWBAR GP

425-8674 DRAWBAR GP
S/N E9Y1-UP
PART OF 479-7656 IMPLEMENT AR, 370-2227 SPECIAL AR
ALSO AN ATTACHMENT
i06144111 SEBP7270
4258674 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 6G-4372 [6] STRIP-WEAR  
3. 6K-6444 [2] SPACER  
4. 185-7115 B [72] SHIM (0.5-MM THK)  
  257-4932 B [16] SHIM (0.25-MM THK)  
6. 259-4468 [1] CAP  
7. 259-4469 [1] ADAPTER  
8. 259-4470 B [1] SHIM (0.12-MM THK)  
  259-4471 B [3] SHIM (0.25-MM THK)  
  259-4472 B [3] SHIM (0.76-MM THK)  
  259-4473 B [2] SHIM (1.52-MM THK)  
12. 268-5743 [2] PLATE  
13. 302-6333 [8] PLATE  
14. 302-6343 [8] PLATE  
15. 308-6304 [6] SHOE-CIRCLE GUIDE  
16. 352-1002 [8] STRIP-WEAR  
17. 424-7251 [2] PLATE  
18. 495-8951 [1] BALL  
19. 502-3879 [1] DRAWBAR AS  
19A. 234-7565 [1] BLOCK  
19B. 122-9709 [1] BLOCK  
19C. 127-3387 M [1] BOSS (M10X1.5X80-MM)  
19D. 178-7023 M [1] BOSS (M10X1.5X30-MM)  
19E. [4] BLOCK  
19F. 8Y-4489 M [1] BOSS (M10X1.5-THD)  
19G. 9C-7929 [2] BLOCK  
19H. 9R-2613 M [1] BOSS-WELD (M10X1.5X25-MM)  
19J. 9R-2672 M [22] BOSS-THREADED (M10X1.5X120-MM)  
19K. 9R-2821 M [4] BOSS (M10X1.5X15-MM)  
19L. 185-7120 [1] SHAFT AS  
19M. 257-4933 [1] PLATE  
19N. 385-6726 [2] GUSSET  
19P. 472-1052 [3] STUD-BALL  
20. 101-7396 M [2] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
21. 106-4175 M [22] BOLT (M20X2.5X60-MM)  
22. 112-3926 M [8] BOLT (M20X2.5X110-MM)  
23. 112-3928 M [18] BOLT (M24X3X130-MM)  
24. 550-3304 M [2] BOLT-HEAD (M24X3X170-MM)  
25. 126-8928 [2] WASHER-HARD (26X40X8-MM THK)  
26. 166-1880 M [2] BOLT (M20X2.5X75-MM)  
27. 1D-6306 [12] NUT (1-8-THD)  
28. 267-3507 [29] WASHER-HARD (26X47X12-MM THK)  
29. 292-5889 [4] SETSCREW (1-8X3.25-IN)  
30. 2H-3896 [8] SETSCREW-SQUARE HEAD (1-8X4-IN)  
31. 6C-9149 [22] WASHER (22X50X10-MM THK)  
32. 7X-2489 M [5] BOLT (M24X3X100-MM)  
33. [1] BOLT  
34. 8T-1482 [7] WASHER-HARD (26X50X8-MM THK)  
35. 317-1117 M [5] LOCKNUT (M24X3-THD)  
36. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
37. [7] BOLT  
38. 9S-8892 [6] BOLT-12 POINT HEAD (3/4-16X3.5-IN)  
   
  185-7115 BFJ [80] SHIM (0.5-MM THK)  
  257-4932 BFJ [32] SHIM (0.25-MM THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   FOR SHIPPING PURPOSES -LOCATED IN CAB; FOR FIELD SERVICE - LOCATED IN TOOLBOX
  M   METRIC PART
 

#SEBP72700663
 

479-7656: IMPLEMENT AR

479-7656 IMPLEMENT AR -CIRCLE, DRAWBAR, MOLDBOARD
S/N E9Y1-UP
AN ATTACHMENT
i06146756 SEBP7270
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  390-9852 Y [1] CIRCLE GP  
  352-5793 Y [1] CYLINDER & MTG GP-BLADE TIP  
  261-2373 Y [1] CYLINDER & MTG GP-CENTERSHIFT  
  257-6804 Y [1] CYLINDER & MTG GP-SIDESHIFT  
  425-8674 Y [1] DRAWBAR GP  
  454-4691 Y [1] DRIVE GP-CIRCLE  
  366-6122 Y [1] LINES GP-ACCUMULATOR  
  Y [1] MOLDBOARD GP  
  465-3377 Y [1] SWIVEL GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72700664
 

462-6461: MOLDBOARD GP

462-6461 MOLDBOARD GP
S/N E9Y1-UP
16-FT, CURVED
PART OF 479-7656 IMPLEMENT AR
CANNOT BE USED WITH ANY OTHER MOLDBOARD AR
AN ATTACHMENT
i06127199 SEBP7270
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  257-3466 Y [1] BIT GP-END  
  257-3462 Y [1] EDGE GP-CUTTING (25-MM THK, CURVED)  
   
  253-4670 [1] MOLDBOARD AS  
  260-7782 [1] RAIL-MOLDBOARD  
  260-7783 [1] RAIL-MOLDBOARD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72700665
 

462-6462: MOLDBOARD GP

462-6462 MOLDBOARD GP
S/N E9Y1-UP
16-FT, STRAIGHT
CANNOT BE USED WITH ANY OTHER MOLDBOARD AR
AN ATTACHMENT
i06127200 SEBP7270
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  257-3466 Y [1] BIT GP-END  
  257-3464 Y [1] EDGE GP-CUTTING (35-MM THK, STRAIGHT)  
   
  253-4670 [1] MOLDBOARD AS  
  260-7782 [1] RAIL-MOLDBOARD  
  260-7783 [1] RAIL-MOLDBOARD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72700666
 

274-1525: AIR CONDITIONER & MOUNTING GP

274-1525 AIR CONDITIONER & MOUNTING GP
S/N E9Y1-UP
PART OF 389-6377 AIR CONDITIONER AR
i02606195 SEBP7270
2741525 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-0410 [2] GASKET  
2. 249-0411 [1] GASKET  
3. 249-0937 [1] DUCT  
4. 263-2555 Y [1] AIR CONDITIONER GP  
5. 265-7454 [1] GASKET  
6. 387-8731 [2] SPACER  
7. 267-5032 [2] FITTING-DRAIN  
8. 118-5619 [2] SCREW-FLAT HEAD (6-20X1-IN)  
9. 145-6669 [2] SCREW-SELF-TAPPING (10X0.75-IN)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
12. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
13. 5P-5637 D SEAL (0.5-M)  
14. 5P-5927 D SEAL (0.44-M)  
14A. 5P-5927 D SEAL (0.23-M EACH)  
14B. 5P-5927 D SEAL (0.37-M)  
15. 5P-5643 SEAL (0.5-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72700667
 

389-6377: AIR CONDITIONER AR

389-6377 AIR CONDITIONER AR
S/N E9Y1-UP
PART OF 361-3120 CAB AR
i06144673 SEBP7270
3896377 AIR CONDITIONER AR Parts scheme
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 244-2701 Y [1] DUCT & FILTER GP-CAB AIR  
2. 273-1878 Y [1] LINES GP-HEATER  
3. 274-1525 Y [1] AIR CONDITIONER & MOUNTING GP  
4. 300-4231 Y [1] CONTROL GP-AIR & TEMPERATURE (AIR CONDITIONER)  
5. 389-6378 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72700668
 

263-2555: AIR CONDITIONER GP

263-2555 AIR CONDITIONER GP
S/N E9Y1-UP
PART OF 274-1525 AIR CONDITIONER & MOUNTING GP
i03789414 SEBP7270
2632555 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-9631 [1] SWITCH-TEMPERATURE (REFRIGERANT)  
2. 6T-6708 [2] WASHER (7X28.6X4.1-MM THK)  
3. 125-9740 [1] RESISTOR  
4. 133-9012 C [2] FUSE (15-AMPERE)(AIR CONDITIONER)  
5. 249-0938 [1] CASE  
6. 263-2553 [1] CASE AS  
7. 263-9466 [1] PLATE  
8. 265-7434 [1] SEAL  
9. 265-7435 [1] GASKET  
10. 273-0338 C [1] PLUG  
11. 273-0339 C [1] PLUG  
12. 276-9015 [1] HARNESS AS-MOTOR (HVAC)  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  7T-0093 [2] PIN-CONNECTOR (12-GA TO 14-GA)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  100-6674 [3] SEAL-CONNECTOR  
  118-5125 [1] CLIP (LOOP)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  5P-5618 [3] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [5] TERMINAL-BLADE (14-GA TO 16-GA)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
14. 278-3354 [1] FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING)  
15. 322-6674 C [1] PLATE  
16. 322-6675 C [1] PLATE AS  
17. 466-7341 C [1] FAN AS (24-VOLT, A/C, HEATER)  
  1F-7958 [1] NUT-FULL (1/2-13-THD)  
18. 328-8755 C [1] WIRE AS  
19. 129-3178 M [1] LOCKNUT (M6X1-THD)  
20. 132-5793 C [2] SCREW-WASHER HEAD (4-40X0.25-IN)  
21. 7X-0490 M [1] BOLT (M6X1X200-MM)  
22. 114-3140 [1] GROMMET  
23. 178-3338 [2] SCREW (8-32X0.313-IN)  
24. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
25. 8T-4205 C [10] WASHER-HARD (7.2X14.5X2-MM THK)  
26. 9X-2038 [4] WASHER (7X19X2-MM THK)  
27. 9X-2044 CM [14] SCREW-TRUSS HEAD (M6X1X16-MM)  
28. 5P-7070 D INSULATION-STRIP (0.2-M EACH)  
29. 6D-5801 J [3] LOCKNUT (8-32-THD)  
30. 238-8839 [1] CORE AS-HEATER  
31. 245-1596 [1] ACTUATOR  
32. 263-2548 [1] COIL AS-EVAPORATOR  
33. 281-2588 J [6] SCREW-SELF-TAPPING  
34. 450-4968 J [2] SCREW-HEX HEAD (8-16X0.5-IN)  
35. 465-7612 J [1] CLIP  
36. 470-3946 J [1] SEAL-O-RING  
37. 521-2576 [1] VALVE AS-CONTROL  
  262-4930 [1] TUBE AS  
  465-7612 [1] CLIP  
  470-3946 [1] SEAL-O-RING  
38. 521-3096 J [1] PLATE AS  
39. 525-2467 J [3] SPACER (4.34X9.53X15.9-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  522-2362 J KIT-VALVE  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP72700669
 

292-0609: ARMREST GP

292-0609 ARMREST GP -RH
S/N E9Y1-UP
PART OF 345-1271 SUPPORT GP-CONTROL
i02574087 SEBP7270
2920609 ARMREST GP Parts scheme
  For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 233-3278 [1] BRACKET AS (RH)  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
2. 253-8868 [1] PIN-SPRING  
3. 283-7980 [1] CUSHION AS  
4. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
5. 122-7666 [1] SPRING  
6. 8C-8430 [1] SETSCREW-SOCKET (10-24X1-IN)  
7. 292-0611 [2] BUSHING  
8. 292-0612 [1] BUSHING  
9. 292-0614 [1] ROD  
10. 292-0618 [1] KNOB  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 16M3 :

CIRCLE & BEAM AS
390-9853 CIRCLE & BEAM AS
VALVE GP-STEERING
366-6681 VALVE GP-STEERING
VALVE GP-SOLENOID & MANIFOLD
279-6521 VALVE GP-SOLENOID & MANIFOLD
VALVE GP-SOLENOID
278-1799 VALVE GP-SOLENOID
VALVE GP-SOLENOID
251-3268 VALVE GP-SOLENOID
VALVE GP-SOLENOID
189-8627 VALVE GP-SOLENOID
VALVE GP-PUMP CONTROL
369-2611 VALVE GP-PUMP CONTROL
VALVE GP-PRESSURE REDUCING
252-8038 VALVE GP-PRESSURE REDUCING
CIRCLE GP
390-9852 CIRCLE GP
DRAWBAR GP
425-8674 DRAWBAR GP
479-7656 IMPLEMENT AR
462-6461 MOLDBOARD GP
462-6462 MOLDBOARD GP
AIR CONDITIONER & MOUNTING GP
274-1525 AIR CONDITIONER & MOUNTING GP
AIR CONDITIONER AR
389-6377 AIR CONDITIONER AR
AIR CONDITIONER GP
263-2555 AIR CONDITIONER GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.