479-7656 IMPLEMENT AR -CIRCLE, DRAWBAR, MOLDBOARD S/N N9Y1-UP AN ATTACHMENT 16M3 MOTOR GRADER

Part No	Qty	Parts name
390-9852 Y	[1]	CIRCLE GP
352-5793 Y	[1]	CYLINDER & MTG GP-BLADE TIP
261-2373 Y	[1]	CYLINDER & MTG GP-CENTERSHIFT
257-6804 Y	[1]	CYLINDER & MTG GP-SIDESHIFT
425-8674 Y	[1]	DRAWBAR GP
454-4691 Y	[1]	DRIVE GP-CIRCLE
366-6122 Y	[1]	LINES GP-ACCUMULATOR
Y	[1]	MOLDBOARD GP
465-3377 Y	[1]	SWIVEL GP
Y		SEPARATE ILLUSTRATION

#SEBP72710791

462-6461: MOLDBOARD GP

MOLDBOARD GP

462-6461 MOLDBOARD GP
S/N N9Y1-UP
16-FT, CURVED
PART OF 479-7656 IMPLEMENT AR
CANNOT BE USED WITH ANY OTHER MOLDBOARD AR
AN ATTACHMENT

i06127199 SEBP7271

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
257-3466 Y	[1]	BIT GP-END
257-3462 Y	[1]	EDGE GP-CUTTING (25-MM THK, CURVED)

253-4670	[1]	MOLDBOARD AS
260-7782	[1]	RAIL-MOLDBOARD
260-7783	[1]	RAIL-MOLDBOARD
Y		SEPARATE ILLUSTRATION

#SEBP72710792

462-6462: MOLDBOARD GP

MOLDBOARD GP

462-6462 MOLDBOARD GP
S/N N9Y1-UP
16-FT, STRAIGHT
CANNOT BE USED WITH ANY OTHER MOLDBOARD AR
AN ATTACHMENT

i06127200 SEBP7271

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
257-3466 Y	[1]	BIT GP-END
257-3464 Y	[1]	EDGE GP-CUTTING (35-MM THK, STRAIGHT)

253-4670	[1]	MOLDBOARD AS
260-7782	[1]	RAIL-MOLDBOARD
260-7783	[1]	RAIL-MOLDBOARD
Y		SEPARATE ILLUSTRATION

#SEBP72710793

274-1525: AIR CONDITIONER & MOUNTING GP

AIR CONDITIONER & MOUNTING GP

274-1525 AIR CONDITIONER & MOUNTING GP
S/N N9Y1-UP
PART OF 389-6377 AIR CONDITIONER AR

i02606195 SEBP7271

2741525 AIR CONDITIONER & MOUNTING GP Parts scheme

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	249-0410	[2]	GASKET
2.	249-0411	[1]	GASKET
3.	249-0937	[1]	DUCT
4.	263-2555 Y	[1]	AIR CONDITIONER GP
5.	265-7454	[1]	GASKET
6.	387-8731	[2]	SPACER
7.	267-5032	[2]	FITTING-DRAIN
8.	118-5619	[2]	SCREW-FLAT HEAD (6-20X1-IN)
9.	145-6669	[2]	SCREW-SELF-TAPPING (10X0.75-IN)
10.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4172 M	[2]	BOLT (M10X1.5X80-MM)
12.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
13.	5P-5637 D		SEAL (0.5-M)
14.	5P-5927 D		SEAL (0.44-M)
14A.	5P-5927 D		SEAL (0.23-M EACH)
14B.	5P-5927 D		SEAL (0.37-M)
15.	5P-5643		SEAL (0.5-M)
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP72710794

389-6377: AIR CONDITIONER AR

AIR CONDITIONER AR

389-6377 AIR CONDITIONER AR
S/N N9Y1-UP
PART OF 361-3120 CAB AR

i06144673 SEBP7271

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	244-2701 Y	[1]	DUCT & FILTER GP-CAB AIR
2.	273-1878 Y	[1]	LINES GP-HEATER
3.	274-1525 Y	[1]	AIR CONDITIONER & MOUNTING GP
4.	300-4231 Y	[1]	CONTROL GP-AIR & TEMPERATURE (AIR CONDITIONER)
5.	389-6378 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
	Y		SEPARATE ILLUSTRATION

#SEBP72710795

263-2555: AIR CONDITIONER GP

AIR CONDITIONER GP

263-2555 AIR CONDITIONER GP
S/N N9Y1-UP
PART OF 274-1525 AIR CONDITIONER & MOUNTING GP

i03789414 SEBP7271

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-9631	[1]	SWITCH-TEMPERATURE (REFRIGERANT)
2.	6T-6708	[2]	WASHER (7X28.6X4.1-MM THK)
3.	125-9740	[1]	RESISTOR
4.	133-9012 C	[2]	FUSE (15-AMPERE)(AIR CONDITIONER)
5.	249-0938	[1]	CASE
6.	263-2553	[1]	CASE AS
7.	263-9466	[1]	PLATE
8.	265-7434	[1]	SEAL
9.	265-7435	[1]	GASKET
10.	273-0338 C	[1]	PLUG
11.	273-0339 C	[1]	PLUG
12.	276-9015	[1]	HARNESS AS-MOTOR (HVAC)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	7T-0093	[2]	PIN-CONNECTOR (12-GA TO 14-GA)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	100-6674	[3]	SEAL-CONNECTOR
	118-5125	[1]	CLIP (LOOP)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	5P-5618	[3]	TERMINAL-BLADE (10-GA TO 12-GA)
	5P-4571	[5]	TERMINAL-BLADE (14-GA TO 16-GA)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
14.	278-3354	[1]	FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING)
15.	322-6674 C	[1]	PLATE
16.	322-6675 C	[1]	PLATE AS
17.	466-7341 C	[1]	FAN AS (24-VOLT, A/C, HEATER)
	1F-7958	[1]	NUT-FULL (1/2-13-THD)
18.	328-8755 C	[1]	WIRE AS
19.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
20.	132-5793 C	[2]	SCREW-WASHER HEAD (4-40X0.25-IN)
21.	7X-0490 M	[1]	BOLT (M6X1X200-MM)
22.	114-3140	[1]	GROMMET
23.	178-3338	[2]	SCREW (8-32X0.313-IN)
24.	6V-1668	[2]	WASHER (6.5X29.1X3-MM THK)
25.	8T-4205 C	[10]	WASHER-HARD (7.2X14.5X2-MM THK)
26.	9X-2038	[4]	WASHER (7X19X2-MM THK)
27.	9X-2044 CM	[14]	SCREW-TRUSS HEAD (M6X1X16-MM)
28.	5P-7070 D		INSULATION-STRIP (0.2-M EACH)
29.	6D-5801 J	[3]	LOCKNUT (8-32-THD)
30.	238-8839	[1]	CORE AS-HEATER
31.	245-1596	[1]	ACTUATOR
32.	263-2548	[1]	COIL AS-EVAPORATOR
33.	281-2588 J	[6]	SCREW-SELF-TAPPING
34.	450-4968 J	[2]	SCREW-HEX HEAD (8-16X0.5-IN)
35.	465-7612 J	[1]	CLIP
36.	470-3946 J	[1]	SEAL-O-RING
37.	521-2576	[1]	VALVE AS-CONTROL
	262-4930	[1]	TUBE AS
	465-7612	[1]	CLIP
	470-3946	[1]	SEAL-O-RING
38.	521-3096 J	[1]	PLATE AS
39.	525-2467 J	[3]	SPACER (4.34X9.53X15.9-MM THK)

			AVAILABLE REPAIR KIT(S):
	522-2362 J		KIT-VALVE
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP72710796

292-0609: ARMREST GP

ARMREST GP

292-0609 ARMREST GP -RH
S/N N9Y1-UP
PART OF 345-1271 SUPPORT GP-CONTROL

i02574087 SEBP7271

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	233-3278	[1]	BRACKET AS (RH)
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
2.	253-8868	[1]	PIN-SPRING
3.	283-7980	[1]	CUSHION AS
4.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
5.	122-7666	[1]	SPRING
6.	8C-8430	[1]	SETSCREW-SOCKET (10-24X1-IN)
7.	292-0611	[2]	BUSHING
8.	292-0612	[1]	BUSHING
9.	292-0614	[1]	ROD
10.	292-0618	[1]	KNOB
	M		METRIC PART

#SEBP72710797

292-0617: ARMREST GP

ARMREST GP

292-0617 ARMREST GP -LH
S/N N9Y1-UP
PART OF 345-1272 SUPPORT GP-CONTROL

i02574088 SEBP7271

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	233-3277	[1]	BRACKET AS (LH)
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
2.	253-8868	[1]	PIN-SPRING
3.	283-7980	[1]	CUSHION AS
4.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
5.	8C-8430	[1]	SETSCREW-SOCKET (10-24X1-IN)
6.	122-7666	[1]	SPRING
7.	292-0611	[2]	BUSHING
8.	292-0612	[1]	BUSHING
9.	292-0614	[1]	ROD
10.	292-0618	[1]	KNOB
	M		METRIC PART

#SEBP72710798

346-8842: BRACKET GP-MOUNTING

BRACKET GP-MOUNTING

346-8842 BRACKET GP-MOUNTING
S/N T4F1-UP
PROVIDES BRACKET WHICH MOUNTS TO THE CYLINDER HEAD AT THE UPPER LEFT AND PROVIDES MOUNTING FOR THE VENTURI CONTROL VALVE, FUEL REGULATOR MANIFOLD, BAROMETRIC PRESSURE SENSOR, AND CLIPPING LOCATIONS FOR THE NRS OIL LINES
PART OF 373-3864, 516-8122, 533-3191, 550-4624, 560-7896 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i03915209 SEBP7271

3468842 BRACKET GP-MOUNTING Parts scheme

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	342-6233	[1]	BRACKET
2.	6V-1820 M	[3]	BOLT (M10X1.5X30-MM)
3.	6V-5839	[3]	WASHER (11X21X2.5-MM THK)
4.	227-6715 M	[1]	STUD (M10X1.5X30-MM)
5.	8T-7934	[1]	WASHER-HARD (11X21X5-MM THK)
	M		METRIC PART

#SEBP72710799

361-3120: CAB AR

CAB AR

361-3120 CAB AR
S/N N9Y1-UP
PART OF 361-3151 CAB AR

i06147551 SEBP7271

For full view, you need register

Parts for your 16M3 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
389-6377 Y	[1]	AIR CONDITIONER AR
361-3109 Y	[1]	CONTROL & MTG GP-IMPLEMENT
345-1277 Y	[1]	CONTROL & MTG GP-JOYSTICK (OPERATOR PLATFORM)
389-2167 Y	[1]	CONTROL GP-SERVICE BRAKE
233-3135 Y	[1]	CONVERTER GP-ELECTRICAL
363-4962 Y	[1]	COVER GP-CAB
Y	[1]	FILM GP
360-7617 Y	[1]	GRADE CONTROL GP
447-2230 Y	[1]	LINER GP-CAB
233-3208 Y	[1]	MIRROR GP-REAR VIEW (INTERIOR)
233-3122 Y	[1]	MOUNTING GP-ANTENNA (RADIO)
382-0667 Y	[1]	PANEL GP-INSTRUMENT
385-8717 Y	[1]	SEAT BELT GP
457-8944 Y	[1]	TRIM GP-CAB
381-8211 Y	[1]	WINDOW GP-VENT
310-2029 Y	[1]	WIPER & WASHER GP-WINDOW (FRONT)
310-2041 Y	[1]	WIPER GP-WINDOW (CAB)
330-3868 Y	[1]	WIPER GP-WINDOW (REAR)
361-3148 Y	[1]	WIRING GP-CAB

382-0668	[1]	CAB AS-ROPS
468-0970	[1]	FILM-INFORMATION (RETARDING GUIDELINES, READ OMM)
442-6279	[1]	FILM-WARNING (ROPS, FOPS, READ OMM, NO WELD)
Y		SEPARATE ILLUSTRATION