AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

420-9075 WIRING GP-SERVICE CENTER -SERVICE CENTER S/N N9A1-UP PART OF 459-1705 ELECTRICAL AR Type 1 18M3


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP
DRIVE GP-FINAL
TRANSMISSION GP

MOTOR GRADER 18M3 MOTOR GRADER N9A
 18M Series 3 Motor Grader N9A00001-UP (MACHINE) POWERED BY C13 Engine SEBP7272 18M3 N9A   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-SENSOR
363-4325 WIRING GP-SENSOR
WIRING GP-SENSOR
363-4325 WIRING GP-SENSOR
WIRING GP-SERVICE CENTER
420-9075 WIRING GP-SERVICE CENTER
WIRING GP-SERVICE CENTER
420-9075 WIRING GP-SERVICE CENTER
WIRING GP-UNIT INJECTOR
345-6733 WIRING GP-UNIT INJECTOR
 

#SEBP72720470
 

420-9075: WIRING GP-SERVICE CENTER

420-9075 WIRING GP-SERVICE CENTER -SERVICE CENTER
S/N N9A1-UP
PART OF 459-1705 ELECTRICAL AR
Type 1
i06088512 SEBP7272
4209075 WIRING GP-SERVICE CENTER Parts scheme 4209075 WIRING GP-SERVICE CENTER Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [35] STRAP-CABLE  
2. 155-0576 [8] MOUNT-ISOLATION  
3. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)  
4. 261-7991 [1] GROMMET  
5. 269-4983 [1] BRACKET AS  
6. 320-3063 [1] SENSOR GP-PRESSURE  
7. 340-8158 Y [1] CONTROL GP-ENGINE ELECTRONIC (AIR COOLING)  
8. 344-7391 [2] SENSOR-PRESSURE (EJECTOR)  
9. 359-9171 [1] SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT)  
10. 359-9172 [1] SENSOR AS-NITROGEN OXIDE (EXHAUST OUTLET)  
11. 370-8539 [1] PLATE AS  
12. 430-9835 Y [1] HARNESS AS-SOLENOID (BRAKE)  
13. 439-4711 Y [1] HARNESS AS-CONTROL (STEERING)  
14. 459-1692 [1] BRACKET AS  
15. 459-1697 [1] BRACKET AS  
16. 459-1698 Y [1] HARNESS AS-ENGINE  
17. 130-5300 [8] CLIP  
18. 132-5789 [5] CLIP (LADDER)  
19. 194-3526 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
20. 198-4777 [1] WASHER-HARD (11X25X10-MM THK)  
21. 204-2281 [6] STRAP-CABLE  
22. 204-8000 [6] MOUNTING-CABLE TIE  
23. 206-5017 [1] SPACER (11X20X5-MM THK)  
24. 228-7100 [1] SEAL-O-RING  
25. 277-1873 [1] CLIP (LADDER)  
26. 309-4314 [1] CLIP (LADDER)  
27. 352-3964 [2] CLIP (LADDER)  
28. 352-3966 [1] CLIP (LADDER)  
29. 352-3968 [1] CLIP (LADDER)  
30. 3J-1907 [2] SEAL-O-RING  
31. 3K-0360 [1] SEAL-O-RING  
32. 4P-7581 [3] CLIP (LADDER)  
33. 4P-8134 [3] CLIP (LADDER)  
34. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
35. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
36. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4136 M [11] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
39. 8T-4138 M [4] BOLT (M6X1X20-MM)  
40. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
43. 8T-4197 M [2] BOLT (M8X1.25X40-MM)  
44. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
45. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
46. 9G-7101 [1] SPACER (11X20X30-MM THK)  
47. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720471
 

420-9075: WIRING GP-SERVICE CENTER

420-9075 WIRING GP-SERVICE CENTER -SERVICE CENTER
S/N N9A1-UP
PART OF 459-1705 ELECTRICAL AR
Type 2
i06954210 SEBP7272
4209075 WIRING GP-SERVICE CENTER Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [36] STRAP-CABLE  
2. 155-0576 [8] MOUNT-ISOLATION  
3. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)(AMBIENT AIR)  
4. 261-7991 [1] GROMMET  
5. 269-4983 [1] BRACKET AS  
6. 320-3063 [1] SENSOR GP-PRESSURE (AIR RESTRICTION)  
7. 340-8158 Y [1] CONTROL GP-ENGINE ELECTRONIC (AIR COOLING)  
8. 344-7391 [1] SENSOR-PRESSURE (EJECTOR)(BRAKE CHARGE)  
8A. 344-7391 [1] SENSOR-PRESSURE (EJECTOR)(BRAKE ACCUMULATOR)  
9. 441-5127 [1] SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT)  
10. 441-5128 [1] SENSOR AS-NITROGEN OXIDE (EXHAUST PIPE OUT)  
11. 370-8539 [1] PLATE AS  
12. 430-9835 Y [1] HARNESS AS-SOLENOID (BRAKE)  
13. 517-1064 CY [1] HARNESS AS-CONTROL (STEERING)  
14. 459-1692 [1] BRACKET AS  
15. 459-1697 [1] BRACKET AS  
16. 516-0748 CY [1] HARNESS AS-ENGINE  
17. 130-5300 [8] CLIP  
18. 132-5789 [5] CLIP (LADDER)  
19. 194-3526 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
20. 198-4777 [1] WASHER-HARD (11X25X10-MM THK)  
21. 204-2281 [6] STRAP-CABLE  
22. 204-8000 [6] MOUNTING-CABLE TIE  
23. 206-5017 [1] SPACER (11X20X5-MM THK)  
24. 228-7100 [1] SEAL-O-RING  
25. 277-1873 [1] CLIP (LADDER)  
26. 309-4314 [1] CLIP (LADDER)  
27. 352-3964 [3] CLIP (LADDER)  
28. 352-3966 [1] CLIP (LADDER)  
29. 352-3968 [1] CLIP (LADDER)  
30. 3J-1907 [2] SEAL-O-RING  
31. 3K-0360 [1] SEAL-O-RING  
32. 4P-7581 [2] CLIP (LADDER)  
33. 4P-8134 [3] CLIP (LADDER)  
34. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
35. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
36. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4136 CM [9] BOLT (M10X1.5X25-MM)  
38. 8T-4137 CM [6] BOLT (M10X1.5X20-MM)  
39. 8T-4138 M [4] BOLT (M6X1X20-MM)  
40. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
41. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
42. 8T-4196 CM [4] BOLT (M10X1.5X35-MM)  
43. 8T-4197 M [2] BOLT (M8X1.25X40-MM)  
44. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
45. 116-3715 CM [1] STUD-TAPERLOCK (M10X1.5X85-MM)  
46. 302-3908 [1] SPACER (11X20X30-MM THK)  
47. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
48. 344-5675 CM [1] NUT (M10X1.5-THD)  
49. 156-6175 [1] CLIP (LADDER)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720472
 

345-6733: WIRING GP-UNIT INJECTOR

345-6733 WIRING GP-UNIT INJECTOR
S/N T4F1-UP
PART OF 373-3864, 516-8122, 533-3191, 550-4624, 560-7896 ENGINE AR-COMPLETE
FOR USE WITH BRAKES AND COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH LOW PROFILE VALVE COVER
ALSO AN ATTACHMENT
i03998301 SEBP7272
3456733 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 418-2029 Y [1] HARNESS AS-ENGINE  
2. 208-9277 M [3] BOLT-FLANGE HEAD (M6X1X20-MM)  
3. 359-4892 [1] RING-RETAINING  
4. 359-4893 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720473
 

474-6913: AXLE AR-FRONT

474-6913 AXLE AR-FRONT
S/N N9A1-UP
PART OF 474-6917 POWER TRAIN AR
i06145076 SEBP7272
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  474-6914 Y [1] AXLE GP-FRONT  
  386-6709 Y [1] MOUNTING GP-AXLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720474
 

386-6764: AXLE AR-REAR

386-6764 AXLE AR-REAR
S/N N9A1-UP
PART OF 474-6917 POWER TRAIN AR
i06144830 SEBP7272
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  379-9145 Y [1] AXLE GP-REAR  
  6G-1740 Y [1] CHAIN GP-DRIVE  
  390-2936 Y [1] CONTROL GP-DIFFERENTIAL LOCK  
  390-2932 Y [1] LINES GP-SERVICE BRAKE  
  381-0821 Y [1] TANDEM & COVER GP  
  381-0830 Y [1] WHEEL AR  
   
  349-6143 [1] FILLER GP-POWER TRAIN OIL  
  3N-2945 [1] GASKET  
  305-3333 [1] TUBE AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720475
 

474-6915: AXLE AS-FRONT

474-6915 AXLE AS-FRONT
S/N N9A1-UP
PART OF 474-6914 AXLE GP-FRONT
i07715145 SEBP7272
4746915 AXLE AS-FRONT Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-8607 [4] BUSHING  
2. 474-6916 [1] AXLE AS  
2A. 8W-6486 [1] BRACKET  
2B. 9R-2613 M [6] BOSS-WELD (M10X1.5X25-MM)  
3. 5P-8847 [4] SEAL-LIP TYPE  
4. 7K-9206 [4] SEAL-LIP TYPE  
5. 8J-5778 [4] BUSHING  
  M   METRIC PART
 

#SEBP72720476
 

474-6914: AXLE GP-FRONT

474-6914 AXLE GP-FRONT
S/N N9A1-UP
PART OF 474-6913 AXLE AR-FRONT
i06145074 SEBP7272
4746914 AXLE GP-FRONT Parts scheme 4746914 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-7835 [2] CONE-BEARING  
2. 2G-5667 [3] RETAINER  
3. 2G-8615 [4] WASHER-THRUST (2.015X3.625X0.11-IN THK)  
4. 2G-8626 [2] WASHER-THRUST (2.02X3.63X0.16-IN THK)  
5. 2G-8741 [4] RING-METAL SEAL  
6. 2G-8777 [4] SEAL  
7. 3B-8489 [10] FITTING-GREASE (1/8-27 PTF)  
8. 8D-1819 [2] CONE-BEARING  
9. 186-6531 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  5K-1075 [2] RING-SEALING  
10. 249-6545 Y [1] CYLINDER & MTG GP-WHEEL LEAN  
11. 257-9799 [2] PIN  
12. 264-1150 [1] ARM AS (LH)  
12A. 2G-7106 [1] BUSHING  
12B. 2G-8738 [1] BUSHING  
  264-1152 [1] PIN  
13. 264-1153 [1] ARM AS (RH)  
13A. 2G-7106 [1] BUSHING  
13B. 2G-8738 [1] BUSHING  
  264-1155 [1] PIN  
14. 264-1158 [1] BAR AS  
14A. 2G-8635 [2] BUSHING  
  9R-2613 M [4] BOSS-WELD (M10X1.5X25-MM)  
15. 264-1167 [2] PIN  
16. 264-1168 [2] PIN  
17. 297-2539 [2] LOCK  
18. 311-1932 [1] HOUSING (LH)  
19. 311-1933 [1] HOUSING (RH)  
20. 361-4430 Y [1] LINK GP-STEERING  
21. 148-8410 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
22. 421-8644 Y [1] CYLINDER & MTG GP-STEERING  
23. 437-8982 [2] RETAINER  
24. 437-8983 [2] SPINDLE  
25. 437-8984 [2] COVER  
26. 474-6915 Y [1] AXLE AS-FRONT  
27. 198-4768 [3] WASHER-HARD (17.5X32X8-MM THK)  
28. 266-7315 [2] WASHER-HARD (22X65X6-MM THK)  
29. 1P-7834 [2] CUP-BEARING  
30. 3B-4640 [2] PIN-COTTER  
31. 4I-5480 [4] WASHER (11X72X3-MM THK)  
32. 5P-8890 [2] SEAL-LIP TYPE  
33. 6V-5696 M [6] BOLT (M12X1.75X80-MM)  
34. 6V-5844 M [3] BOLT (M16X2X35-MM)  
35. 6V-8237 [2] WASHER (26X44X4-MM THK)  
36. 7D-1649 [6] WASHER-HARD (13.5X32X5-MM THK)  
37. 7K-9203 [4] SEAL-LIP TYPE  
38. 7X-0851 M [2] NUT (M24X3-THD)  
39. 7X-2561 M [4] BOLT (M20X2.5X35-MM)  
40. 7X-7729 [4] WASHER (11X25X3-MM THK)  
41. 8D-1817 [2] CUP-BEARING  
42. 8F-8733 [2] SEAL-O-RING  
43. 8T-0667 M [2] BOLT (M24X3X100-MM)  
44. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
46. 9M-2092 [4] SEAL-O-RING  
47. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
48. 426-4334 B [6] SHIM (0.127-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720477
 

379-9145: AXLE GP-REAR

379-9145 AXLE GP-REAR
S/N N9A1-UP
PART OF 386-6764 AXLE AR-REAR
i06128441 SEBP7272
3799145 AXLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-6804 [1] SEAL-O-RING  
2. 215-9665 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
3. 215-9666 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
4. 224-2323 [1] BEARING-THRUST  
5. 248-0833 [1] PLUG AS-DRAIN (AXLE, REAR)  
  3S-9233 [1] SEAL-O-RING  
  5L-4759 [1] SEAL-O-RING  
6. 273-8664 [1] PISTON  
7. 273-8666 [1] SEAL-D-RING  
8. 273-8667 [1] SEAL-D-RING  
9. 280-4438 [2] PLUG  
10. 285-2074 [1] TUBE AS  
11. 288-5962 [2] SHAFT-AXLE  
12. 313-4677 [2] GEAR AS-SUN  
    (EACH INCLUDES)
  3H-4192 [1] RING-RETAINING  
13. 379-9146 [1] HOUSING AS  
  5P-8245 [25] WASHER-HARD (13.5X25.5X3-MM THK)  
  6V-5684 M [21] BOLT (M12X1.75X45-MM)  
  095-0889 [2] PIN-SPRING  
  6V-3823 M [4] BOLT (M12X1.75X60-MM)  
14. 381-0824 [1] TUBE AS  
15. 387-4496 Y [1] DIFFERENTIAL & BEVEL GEAR GP  
16. 392-0178 Y [2] DRIVE GP-FINAL  
17. 148-8369 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
18. 378-2695 M [56] BOLT (M20X2.5X70-MM)  
19. 215-8209 [1] BEARING-SPECIAL RACE  
20. 2D-0591 [2] RING-RETAINING  
21. 317-1009 [2] WASHER (18X35X8-MM THK)  
22. 4J-5351 [2] SEAL-O-RING  
23. 4K-1388 [2] SEAL-O-RING  
24. 6V-3532 M [8] BOLT (M20X2.5X60-MM)  
25. 6V-8397 [2] SEAL-O-RING  
26. 6V-9168 [2] NUT (11/16-16-THD)  
27. 7M-8485 [1] SEAL-O-RING  
28. 8T-0088 M [8] BOLT (M16X2X65-MM)  
29. 8T-3282 [64] WASHER-HARD (22X35X3.5-MM THK)  
30. 9X-8268 [8] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720478
 

272-8011: CARRIER GP-FINAL DRIVE

272-8011 CARRIER GP-FINAL DRIVE
S/N N9A1-UP
PART OF 392-0178 DRIVE GP-FINAL
i02638880 SEBP7272
2728011 CARRIER GP-FINAL DRIVE Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2D-6516 [6] BEARING AS-ROLLER  
2. 424-8845 [1] CARRIER-PLANETARY  
3. 269-5767 [3] SHAFT  
4. 269-8417 [3] GEAR-PLANETARY (29-TEETH)  
5. 272-4978 [3] SPACER (111.07X89X2.56-MM THK)  
6. 273-2457 [3] RETAINER  
7. 3E-4353 [6] WASHER-HARD (11X25X3-MM THK)  
8. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
9. 8X-8378 [6] WASHER (85.32X131.80X2.92-MM THK)  
  M   METRIC PART
 

#SEBP72720479
 

381-0673: CASE & PARTS GP-PLANETARY

381-0673 CASE & PARTS GP-PLANETARY
S/N DM31-UP
PART OF 381-0675 TRANSMISSION AR
i06144782 SEBP7272
3810673 CASE & PARTS GP-PLANETARY Parts scheme 3810673 CASE & PARTS GP-PLANETARY Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-5157 [4] RACE-BEARING OUTER  
2. 250-0951 [1] RACE-BEARING  
3. 250-0953 [1] RACE-BEARING  
4. 2H-6489 [1] RACE-BEARING OUTER  
5. 5P-2304 [2] RACE & ROLLER AS  
6. 2S-3029 [1] BALL BEARING  
7. 6K-4718 [1] BEARING  
8. 6V-0852 [1] CAP-DUST  
9. 6V-1720 [1] PLATE-SERIAL NUMBER (TRANSMISSION)  
10. 9W-1454 [4] COVER  
11. 9W-6465 [1] RETAINER-BEARING  
12. 145-8039 [3] LOCK  
13. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
14. 165-4929 [2] PLUG AS-MAGNETIC (AXLE OIL DRAIN)  
    (EACH INCLUDES)
  5P-4484 [1] PLUG-MAGNETIC  
  7M-8485 [1] SEAL-O-RING  
15. 188-2162 [1] COVER  
16. 197-4977 [1] PLUG AS  
  5P-4483 [1] PLUG  
  7M-8485 [1] SEAL-O-RING  
17. 233-8134 [1] GEAR AS (44-TEETH)  
  4K-8603 [1] PLUG-CUP  
18. 251-6673 [1] FILTER-MAGNETIC (TRANSMISSION SUMP)  
19. 251-6674 [1] SCREEN-SUCTION (TRANSMISSION SUMP)  
20. 253-5303 [1] GUARD  
21. 253-5322 [2] GUARD  
22. 263-7429 [1] TUBE AS  
23. 290-3263 [1] PLATE  
24. 299-8905 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
25. 322-3260 [1] BRACKET AS  
  8T-3851 M [1] BOSS-WELD (M10X1.5X17.5-MM)  
26. 345-1999 [1] PLATE AS  
27. 431-8814 [1] COVER AS  
  5M-7937 [2] DOWEL  
28. 455-7895 [1] CASE AS-TRANSMISSION  
  6Y-3083 [6] PLUG  
  7T-6496 [2] PLUG  
  8M-6521 [2] DOWEL  
29. 148-8309 [1] ADAPTER AS  
  2P-8421 [1] ADAPTER-O-RING  
  3D-2824 [1] SEAL-O-RING  
31. 148-8409 [5] PLUG AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  9S-8008 [1] PLUG (1-1/16-12-THD)  
32. 160-8492 M [1] BOLT (M10X1.5X85-MM)  
33. 164-5619 [5] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
34. 183-7262 [2] PLUG AS  
    (EACH INCLUDES)
  2S-4078 [1] SEAL-O-RING  
  9S-8010 [1] PLUG  
35. 1B-5170 [1] PLUG-PIPE  
36. 3K-0715 [1] SEAL-O-RING  
37. 4J-8996 [2] SEAL-O-RING  
38. 5F-3092 [1] SEAL-O-RING  
39. 5P-3863 [4] SEAL-O-RING  
40. 6V-1820 M [1] BOLT (M10X1.5X30-MM)  
41. 6V-3940 M [4] BOLT (M8X1.25X25-MM)  
42. 6V-8212 M [1] BOLT (M10X1.5X16-MM)  
43. 8C-3210 M [2] BOLT (M6X1X16-MM)  
44. 8T-4121 [50] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
46. 8T-4178 M [43] BOLT (M10X1.5X90-MM)  
47. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
48. 8T-4908 M [12] BOLT (M8X1.25X25-MM)  
49. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
50. 9W-7038 [1] RING-SNAP  
51. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
52. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
53. 455-9193 [1] VALVE GP-RELIEF  
  2H-3932 [1] SEAL-O-RING  
  6V-8116 [1] RING-RETAINING  
  136-9301 [1] SPRING  
  456-0097 [1] PLUG AS  
  9J-8580 [1] PIN  
54. 148-8406 [5] PLUG AS  
    (EACH INCLUDES)
  7M-8485 [1] SEAL-O-RING  
  9S-9334 [1] PLUG (1-5/16-12-THD)  
55. 6V-5759 [1] SEAL-O-RING  
56. 1U-8846 B SEALANT-GASKET  
57. 9X-2097 M [1] STUD (M8X1.25-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 18M3 :

WIRING GP-SENSOR
363-4325 WIRING GP-SENSOR
WIRING GP-SENSOR
363-4325 WIRING GP-SENSOR
WIRING GP-SENSOR
351-1955 WIRING GP-SENSOR
WIRING GP-REAR LIGHTING
479-6065 WIRING GP-REAR LIGHTING
WIRING GP-REAR LIGHTING
479-6065 WIRING GP-REAR LIGHTING
WIRING GP-REAR
475-4930 WIRING GP-REAR
WIRING GP-REAR
475-4930 WIRING GP-REAR
WIRING GP-REAR
420-9080 WIRING GP-REAR
WIRING GP-SERVICE CENTER
420-9075 WIRING GP-SERVICE CENTER
WIRING GP-UNIT INJECTOR
345-6733 WIRING GP-UNIT INJECTOR
474-6913 AXLE AR-FRONT
386-6764 AXLE AR-REAR
AXLE AS-FRONT
474-6915 AXLE AS-FRONT
AXLE GP-FRONT
474-6914 AXLE GP-FRONT
AXLE GP-REAR
379-9145 AXLE GP-REAR
CARRIER GP-FINAL DRIVE
272-8011 CARRIER GP-FINAL DRIVE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.