AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

443-8216 SEAT GP-SUSPENSION -CLOTH S/N N9A1-UP PART OF 421-1285 SEAT GP-SUSPENSION AN ATTACHMENT 18M3



OPERATOR STATION
SEAT GP
SUPPORT GP
SEAT GP
WASHER GP-WINDOW
CAB GP
WINDOW GP

MOTOR GRADER 18M3 MOTOR GRADER N9A
 18M Series 3 Motor Grader N9A00001-UP (MACHINE) POWERED BY C13 Engine SEBP7272 18M3 N9A   (2015)

OPERATOR STATION

SEAT GP
SEAT GP-SUSPENSION
421-1287 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
421-1287 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
443-8216 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
489-6481 SEAT GP-SUSPENSION
SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT
 

#SEBP72720880
 

443-8216: SEAT GP-SUSPENSION

443-8216 SEAT GP-SUSPENSION -CLOTH
S/N N9A1-UP
PART OF 421-1285 SEAT GP-SUSPENSION
AN ATTACHMENT
i05899631 SEBP7272
4438216 SEAT GP-SUSPENSION Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-1288 [10] LOCKNUT-FLANGE (3/8-16-THD)  
2. 164-4883 [1] KNOB-LUMBAR  
3. 177-1863 [2] BOLT-PIVOT (3/8-16X2.89-IN)  
4. 218-2529 [3] PLUG  
5. 229-1494 [1] EXTENSION GP-BACKREST (CLOTH)  
6. 262-0767 [1] BRACKET AS (LH)  
7. 277-8103 [3] PLUG  
8. 292-6402 Y [1] PAN GP-BACKREST (LUMBAR)  
9. 314-5162 [1] BRACKET AS (RH)  
11. 355-3016 [1] PLATE AS  
12. 369-9004 [1] CABLE AS  
13. 389-0879 [1] PAN-SEAT BACK  
14. 171-1230 [6] SCREW-BUTTON HEAD (3/8-16X1-IN)  
15. 8T-7566 [1] PIN-SPRING  
16. 9F-5975 [1] BOLT (5/16-18X0.75-IN)  
17. 436-1687 [1] KIT-LATCH  
    (INCLUDES BOLTS, LATCHES, RODS, SPRINGS & WASHERS)
18. 436-1688 [1] KIT-SEAT  
    (INCLUDES RETAINERS, ROD, SPRINGS & WASHERS)
19. 442-5287 [1] KIT-SHAFT  
20. 443-8573 [1] KIT-HANDLE (SEAT ADJUSTMENT)  
    (INCLUDES LEVERS, RETAINERS, SPRINGS, WASHERS & ROD)
21. 446-0635 [1] KIT-SEAT CUSHION (CLOTH)  
    (INCLUDES CUSHIONS, SCREWS, SEAT PAN & OPERATOR STATION HARNESS)
22. 294-5042 [2] SPACER (11.1X19.5X9.67-MM THK)  
23. 4L-6454 [2] BOLT (3/8-16X1-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720881
 

489-6481: SEAT GP-SUSPENSION

489-6481 SEAT GP-SUSPENSION
S/N N9A1-UP
PART OF 421-1285 SEAT GP-SUSPENSION
AN ATTACHMENT
i06718513 SEBP7272
4896481 SEAT GP-SUSPENSION Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
2. 229-1494 [1] EXTENSION GP-BACKREST (CLOTH)  
  117-4491 [1] ROD  
3. 277-8103 [3] PLUG  
4. 355-3016 [1] PLATE AS  
5. 488-2137 [1] KIT-SHAFT (RECLINER)  
    (INCLUDES SHAFT, CABLE AS, LEVERS, RECLINERS & BOLT)
6. 389-0879 [1] PAN-SEAT BACK  
7. 488-1670 [1] PAN AS  
8. 436-1687 [1] KIT-LATCH (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, LATCHES, RODS, SPRINGS & WASHERS)
9. 436-1688 [1] KIT-SEAT (TILT)  
    (INCLUDES RETAINERS, ROD, SPRINGS & WASHERS)
10. 443-8573 [1] KIT-HANDLE (SEAT ADJUSTMENT)  
    (INCLUDES ROD, LEVERS, SPRINGS & WASHERS)
11. 446-0635 [1] KIT-SEAT CUSHION (CLOTH)  
    (INCLUDES CUSHIONS, SCREWS, SEAT PAN & OPERATOR STATION HARNESS)
  M   METRIC PART
 

#SEBP72720882
 

345-1271: SUPPORT GP-CONTROL

345-1271 SUPPORT GP-CONTROL -JOYSTICK, RH
S/N N9A1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
i04040268 SEBP7272
3451271 SUPPORT GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [10] NUT-CLIP (M6X1-THD)  
2. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
3. 233-3248 [2] BUSHING  
4. 233-3252 [1] SHAFT AS  
5. 233-3270 [1] SUPPORT AS (RH)  
6. 233-3275 [1] BRACKET AS (RH)  
7. 251-2247 [2] GROMMET  
8. 252-1805 Y [1] CUSHION GP-ARM  
9. 252-1808 [1] SUPPORT AS (RH)  
  3G-0622 [2] RING-RETAINING  
  7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
10. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
11. 253-3483 [1] PLATE AS  
12. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
13. 292-0609 Y [1] ARMREST GP (RH)  
14. 456-1559 [1] ADJUSTER AS  
15. 345-1273 [1] COVER  
16. 345-1274 [1] COVER  
17. 346-0626 [1] BRACKET  
18. 346-9581 [1] FILM-IDENTIFICATION (OPERATOR CONTROLS, RH)  
19. 114-6658 [10] WASHER (6.5X17X1-MM THK)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 7J-5925 [1] PIN-COTTER  
22. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
23. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
24. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
26. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
27. 9X-2045 M [10] SCREW-TRUSS HEAD (M6X1X20-MM)  
28. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
29. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720883
 

345-1272: SUPPORT GP-CONTROL

345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N N9A1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
i04040269 SEBP7272
3451272 SUPPORT GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [10] NUT-CLIP (M6X1-THD)  
2. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
3. 233-3227 [1] SUPPORT AS (LH)  
4. 233-3248 [2] BUSHING  
5. 233-3252 [1] SHAFT AS  
6. 251-2247 [1] GROMMET  
7. 252-1805 Y [1] CUSHION GP-ARM  
8. 252-1807 [1] SUPPORT AS (LH)  
  3G-0622 [2] RING-RETAINING  
  7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
9. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
10. 253-3483 [1] PLATE AS  
11. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
12. 272-8329 [1] BRACKET AS (LH)  
13. 292-0617 Y [1] ARMREST GP (LH)  
14. 456-1559 [1] ADJUSTER AS  
15. 345-1275 [1] COVER  
16. 345-1276 [1] COVER  
17. 346-0627 [1] BRACKET  
18. 346-9580 [1] FILM-IDENTIFICATION (OPERATOR CONTROLS, LH)  
19. 114-6658 [10] WASHER (6.5X17X1-MM THK)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 7J-5925 [1] PIN-COTTER  
22. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
23. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
24. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
26. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
27. 9X-2044 M [10] SCREW-TRUSS HEAD (M6X1X16-MM)  
28. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
29. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72720884
 

256-8768: SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT -AIR
S/N N9A1-UP
24-VOLT
PART OF 421-1285, 421-1286, 421-1287 SEAT GP-SUSPENSION
AN ATTACHMENT
i05353971 SEBP7272
2568768 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 101-0003 [26] FASTENER  
6. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
7. 164-1234 [1] PLATE  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 C [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  097-7234 [2] TERMINAL-BLADE (18-GA TO 22-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  329-3734 B TAPE-ELECTRICAL  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 C [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 5P-6010 D TUBE (0.257-M)  
29A. 5P-6010 D TUBE (0.356-M)  
30. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
31. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
31A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
34. 442-8151 [1] CLIP-CABLE  
35. 3S-2093 [4] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SEAT)  
    (INCLUDES KNOB ASSEMBLY)
  212-7779 H [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER,
    BRACKETS, KIT, CABLE ASSEMBLY & KNOB)
  211-9294 [1] KIT-TETHER (SEAT)  
    (INCLUDES TETHER)
  213-5170 [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7783 H [1] KIT-PULLEY  
    (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING)
  397-6405 [1] KIT-SEAT AIR COMPRESSOR  
    (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  H   KITS MARKED H SERVICE PART(S) MARKED H
  M   METRIC PART
 

#SEBP72720885
 

325-9410: TANK GP-WINDOW WASHER

325-9410 TANK GP-WINDOW WASHER
S/N N9A1-UP
PART OF 310-2029 WIPER & WASHER GP-WINDOW
i03955215 SEBP7272
3259410 TANK GP-WINDOW WASHER Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-5698 [1] GROMMET  
2. 416-0021 [3] PUMP AS-WASHER (24-VOLT)  
3. 261-3345 [1] CONNECTOR  
4. 267-8715 [3] GROMMET  
5. 321-5236 [3] PLUG  
6. 355-9823 [1] TANK AS-WINDOW WASHER  
 

#SEBP72720886
 

457-8944: TRIM GP-CAB

457-8944 TRIM GP-CAB -HVAC
S/N N9A1-UP
PART OF 361-3120 CAB AR
i06146764 SEBP7272
4578944 TRIM GP-CAB Parts scheme 4578944 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0622 B [10] PLUG-BUTTON  
2. 172-8591 M [7] NUT-CLIP (M6X1-THD)  
3. 6V-8928 [1] HOOK-COAT  
4. 8C-6368 [1] SCREW AS-WING  
5. 8Y-6379 [1] KIT-HAMMER (CAB WINDOW)  
    (INCLUDES BRACKET & HAMMER)
6. 422-2152 [4] LOUVER AS-VENT  
7. 9U-8263 B [1] COVER  
8. 144-4107 B [2] FASTENER  
9. 164-8474 [2] LOUVER AS-VENT  
10. 169-2876 [1] FILM-IDENTIFICATION (POWER RECEPTACLE, 12-VOLT)  
11. 171-4047 [4] LOUVER AS-VENT  
12. 214-9186 [5] BUTTON  
13. 294-1002 [1] PLENUM (LOWER, RH)  
14. 294-1004 [1] PLENUM (LOWER, LH)  
15. 297-4170 [1] INSULATION  
16. 303-9456 [1] CUP HOLDER  
17. 325-1258 [1] PLENUM (UPPER, RH)  
18. 325-1260 [1] PLENUM (UPPER, LH)  
20. 330-3865 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
  419-3214 [6] BOSS  
21. 334-6090 [6] STUD  
22. 343-6499 [1] COVER AS (RH)  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
23. 343-6500 [1] COVER AS (LH)  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
24. 357-2261 [1] SUPPORT AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
25. 357-2270 [1] COVER AS  
26. 361-0429 [1] PANEL (LH)  
27. 368-8072 [1] PANEL (RH)  
28. 373-4446 B [1] PLUG  
29. 417-6775 [1] TRAY  
30. 419-7776 [1] COVER AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
31. 419-8564 [2] STRAP  
32. 424-8957 [1] PANEL-COVER  
33. 436-7082 [1] TRAY  
34. 437-8991 [1] NET AS (STORAGE)  
35. 438-8077 [1] BIN-STORAGE  
36. 438-8078 [1] BIN-STORAGE  
37. 439-9973 [6] CLIP  
38. 441-7480 [1] PLATE AS  
  9R-2672 M [1] BOSS-THREADED (M10X1.5X120-MM)  
  9R-2821 M [1] BOSS (M10X1.5X15-MM)  
39. 443-6428 [1] FLOOR MAT AS  
40. 445-0466 [2] INSERT  
41. 448-3613 [1] STRAP  
42. 463-6185 [1] LINER  
43. 463-6186 [1] LINER  
44. 104-2091 [16] SCREW-FLAT HEAD (6-20X0.5-IN)  
45. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
46. 232-1473 [16] WASHER (6X18X1-MM THK)  
47. 195-0936 M [6] INSERT-THREADED (M6X1-THD)  
48. 212-6891 [6] RETAINER  
49. 4I-3069 [1] WASHER-HARD (7X15.5X0.8-MM THK)  
50. 2V-2015 [1] NUT-SPEED  
51. 2V-3726 B [1] BUMPER  
52. 3E-8020 M [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
53. 6K-3273 [4] RIVET-POP  
55. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
56. 7X-0579 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
57. 7X-2621 M [2] BOLT (M10X1.5X12-MM)  
58. 8C-9660 [6] WASHER (4.6X7.9X0.8-MM THK)  
59. 8R-3695 B [1] GROMMET  
60. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
61. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
63. 9X-2038 [9] WASHER (7X19X2-MM THK)  
64. 9X-2043 M [6] SCREW-TRUSS HEAD (M6X1X14-MM)  
65. 9X-2044 M [8] SCREW-TRUSS HEAD (M6X1X16-MM)  
66. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
68. 5P-5927 D SEAL (0.9-M)  
69. 8T-6936 D SEAL (0.5-M EACH)  
70. 325-9407 [1] FILM-IDENTIFICATION (WRITE DATA)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP72720887
 

373-3993: WINDOW GP-CAB

373-3993 WINDOW GP-CAB -FRONT
S/N N9A1-UP
PART OF 386-1309, 386-1310 CAB GP
AN ATTACHMENT
i05080776 SEBP7272
3733993 WINDOW GP-CAB Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-1018 [2] BRACKET  
2. 373-3994 [1] GLASS-FRONT  
3. 114-6658 [6] WASHER (6.5X17X1-MM THK)  
4. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
5. 294-1015 E SEAL (25-CM EACH)  
6. 294-1014 E SEAL-GLASS (178-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP72720888
 

374-0714: WINDOW GP-CAB

374-0714 WINDOW GP-CAB -FRONT
S/N N9A1-UP
HEATED
PART OF 386-1311, 442-8722 CAB GP
AN ATTACHMENT
i06147008 SEBP7272
3740714 WINDOW GP-CAB Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 381-2326 [1] RELAY AS (24-VOLT)(HEATED WINDOW)  
2. 294-1018 [2] BRACKET  
3. 374-0715 [1] GLASS AS-FRONT (HEATED)  
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
4. 114-6658 [6] WASHER (6.5X17X1-MM THK)  
5. 7K-1181 [1] STRAP-CABLE  
6. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
7. 294-1015 E SEAL (25-CM EACH)  
8. 294-1014 E SEAL-GLASS (178-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP72720889
 

381-8211: WINDOW GP-VENT

381-8211 WINDOW GP-VENT
S/N N9A1-UP
PART OF 361-3120 CAB AR
i04552283 SEBP7272
3818211 WINDOW GP-VENT Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-5059 [2] WASHER (15X29.5X2.5-MM THK)  
2. 341-8342 [2] LATCH AS-WINDOW  
    (EACH INCLUDES)
  8Y-8294 [1] LATCH AS-WINDOW  
  335-2228 [1] PIN-GROOVED  
  332-8658 [1] BRACKET  
3. 376-9207 [2] VENT AS  
4. 114-6658 [4] WASHER (6.5X17X1-MM THK)  
5. 3E-4302 M [4] SCREW-FLAT HEAD (M4X0.7X10-MM)  
6. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
7. 148-5355 E SEAL (42-CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 18M3 :

SEAT GP-SUSPENSION
421-1287 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
421-1287 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
421-1287 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
421-1286 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
421-1286 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
421-1285 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
421-1285 SEAT GP-SUSPENSION
SEAT GP
489-6504 SEAT GP
SEAT GP-SUSPENSION
489-6481 SEAT GP-SUSPENSION
SUPPORT GP-CONTROL
345-1271 SUPPORT GP-CONTROL
SUPPORT GP-CONTROL
345-1272 SUPPORT GP-CONTROL
SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT
TANK GP-WINDOW WASHER
325-9410 TANK GP-WINDOW WASHER
TRIM GP-CAB
457-8944 TRIM GP-CAB
WINDOW GP-CAB
373-3993 WINDOW GP-CAB
WINDOW GP-CAB
374-0714 WINDOW GP-CAB
Back to top