AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

344-2764 CONTROL GP-ELECTROHYDRAULIC S/N E9W1-UP PART OF 385-7554, 385-7557 CONTROL AR-HYDRAULIC Type 1 AN ATTACHMENT 18M3


OPERATOR STATION
CONTROL GP
CAB GP
SEAT GP
MONITOR GP
DOOR GP

MOTOR GRADER 18M3 MOTOR GRADER E9W
 18M Series 3 Motor Grader E9W00001-UP (MACHINE) POWERED BY C13 Engine SEBP7273 18M3 E9W   (2015)

OPERATOR STATION

CONTROL GP
CONTROL & MTG GP-JOYSTICK
345-1277 CONTROL & MTG GP-JOYSTICK
357-9151 CONTROL & MTG GP-JOYSTICK
CONTROL GP-ELECTROHYDRAULIC
272-8442 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
344-2764 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
344-2764 CONTROL GP-ELECTROHYDRAULIC
360-7615 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-JOYSTICK
348-6995 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
360-2987 CONTROL GP-JOYSTICK
 

#SEBP72730670
 

344-2764: CONTROL GP-ELECTROHYDRAULIC

344-2764 CONTROL GP-ELECTROHYDRAULIC
S/N E9W1-UP
PART OF 385-7554, 385-7557 CONTROL AR-HYDRAULIC
Type 1
AN ATTACHMENT
i03919029 SEBP7273
3442764 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 358-4931 [1] CONTROL AS-PROPORTIONAL (REAR IMPLEMENT)  
  8T-8737 [1] PLUG-SEAL  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  281-3136 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
2. 251-2247 [1] GROMMET  
3. 281-0387 [1] PLATE (REAR)  
4. 281-0390 [1] GRIP  
5. 281-0431 [1] PLATE AS  
6. 286-0277 [1] FILM-INSTRUCTION (NO FLOAT)  
7. 299-1030 [1] ENCLOSURE AS  
8. 334-9395 [1] KNOB  
9. 351-8482 [1] BRACKET  
10. 352-1502 [1] BEARING  
11. 352-2586 [1] BOLT-SPECIAL  
12. 127-2170 M [2] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
13. 225-3109 M [5] SCREW-TRUSS HEAD (M4X0.7X14-MM)  
  M   METRIC PART
 

#SEBP72730671
 

344-2764: CONTROL GP-ELECTROHYDRAULIC

344-2764 CONTROL GP-ELECTROHYDRAULIC
S/N E9W1-UP
PART OF 385-7554, 385-7557 CONTROL AR-HYDRAULIC
Type 2
AN ATTACHMENT
i06926626 SEBP7273
3442764 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 466-0907 C [1] CONTROL AS-PROPORTIONAL (REAR IMPLEMENT)  
  8T-8737 [3] PLUG-SEAL  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  281-3136 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
2. 251-2247 [1] GROMMET  
3. 281-0387 [1] PLATE (REAR)  
4. 281-0390 [1] GRIP  
5. 281-0431 [1] PLATE AS  
6. 286-0277 [1] FILM-INSTRUCTION (NO FLOAT)  
7. 299-1030 [1] ENCLOSURE AS  
8. 334-9395 [1] KNOB  
9. 351-8482 [1] BRACKET  
10. 352-1502 [1] BEARING  
11. 352-2586 [1] BOLT-SPECIAL  
12. 127-2170 M [2] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
13. 225-3109 M [5] SCREW-TRUSS HEAD (M4X0.7X14-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP72730672
 

360-7615: CONTROL GP-ELECTROHYDRAULIC

360-7615 CONTROL GP-ELECTROHYDRAULIC -AUXILIARY CONTROL
S/N E9W1-UP
POD
PART OF 385-7557 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i03919129 SEBP7273
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  272-8442 Y [1] CONTROL GP-ELECTROHYDRAULIC (WITH AUXILIARY LEVER)  
   
  5C-9553 M [1] BOLT (M6X1X16-MM)  
  7X-0818 M [2] BOLT (M8X1.25X45-MM)  
  9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72730673
 

348-6995: CONTROL GP-JOYSTICK

348-6995 CONTROL GP-JOYSTICK -RH
S/N E9W1-UP
ELECTRONIC
PART OF 357-9151 CONTROL & MTG GP-JOYSTICK
i03973593 SEBP7273
3486995 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0705 [9] SEAL  
2. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 247-0733 [1] BOOT  
4. 9X-3401 [15] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 8T-8737 [9] PLUG-SEAL  
6. 271-2811 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 442-0052 J [1] KIT-JOYSTICK  
    (INCLUDES TAPE, TAPE REMOVAL TOOL, SCREWS, NUTS, BOLT, BIT & WASHERS)
  J   USED ONLY WHEN ADVANCED CONTROL JOYSTICK IS MOUNTED TO JOYSTICK HANDLE
 

#SEBP72730674
 

360-2987: CONTROL GP-JOYSTICK

360-2987 CONTROL GP-JOYSTICK -LH
S/N E9W1-UP
ELECTRONIC
PART OF 357-9151 CONTROL & MTG GP-JOYSTICK
i04015815 SEBP7273
3602987 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0705 [5] SEAL  
2. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 247-0733 [1] BOOT  
4. 9X-3401 [23] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 8T-8737 [5] PLUG-SEAL  
6. 271-2811 [1] KIT-RECEPTACLE (12-PIN)  
7. 151-9274 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8. 342-9971 [1] SWITCH AS (FORWARD, NEUTRAL, REVERSE)  
9. 442-0052 J [1] KIT-JOYSTICK  
    (INCLUDES TAPE, TAPE REMOVAL TOOL, SCREWS, BOLT, NUTS, BIT & WASHERS)
  J   KIT USED ONLY WHEN ADVANCED CONTROL JOYSTICK IS MOUNTED TO JOYSTICK HANDLE)
 

#SEBP72730675
 

363-4962: COVER GP-CAB

363-4962 COVER GP-CAB
S/N E9W1-UP
PART OF 361-3120 CAB AR
i04562502 SEBP7273
3634962 COVER GP-CAB Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 356-5177 [1] COVER-VENT  
2. 363-4961 [1] COVER  
3. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
4. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
5. 6V-5746 D TRIM (0.8-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP72730676
 

252-1805: CUSHION GP-ARM

252-1805 CUSHION GP-ARM
S/N E9W1-UP
PART OF 345-1271, 345-1272 SUPPORT GP-CONTROL
i02178500 SEBP7273
2521805 CUSHION GP-ARM Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. 233-3272 [1] CUSHION AS  
3. 5C-9553 M [2] BOLT (M6X1X16-MM)  
4. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP72730677
 

447-2229: DISPLAY GP-CAMERA

447-2229 DISPLAY GP-CAMERA
S/N E9W1-UP
CANNOT BE USED WITH @@@@@442-4478@@@@@
AN ATTACHMENT
i05498691 SEBP7273
4472229 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-8248 [1] CABLE AS-COMMUNICATION  
2. 333-8153 [1] CONNECTION AS  
3. 464-6047 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  344-3847 [1] CABLE AS (DISPLAY)  
4. 3S-2093 [11] STRAP-CABLE  
5. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
6. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP72730678
 

357-9201: DOOR GP-CAB

357-9201 DOOR GP-CAB -RH
S/N E9W1-UP
PART OF 386-1309 CAB GP
AN ATTACHMENT
i04994789 SEBP7273
3579201 DOOR GP-CAB Parts scheme 3579201 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [3] NUT-CLIP (M6X1-THD)  
2. 6V-7636 [2] PIN AS-SPRING  
3. 184-0983 M [1] NUT-HEX FLANGE (M12X1.75-THD)  
4. 252-1862 J [1] HANDLE AS-PULL  
5. 252-1863 [1] GASKET  
6. 261-1731 [1] BOOT  
7. 269-2890 [1] CLEVIS  
8. 269-2892 [1] PIN  
9. 269-2893 [1] CLIP  
10. 272-1623 [1] BELLCRANK AS  
11. 285-3692 [1] SPACER-SPECIAL  
12. 295-6405 [1] LATCH AS (RH)  
13. 507-2767 [1] STRIKER AS  
14. 299-1020 [1] LEVER AS  
  8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  115-9345 [1] KNOB-CONTROL  
15. 299-1660 [1] CABLE AS  
  7S-9930 [2] RING-RETAINING  
  159-0052 [2] PIN-CLEVIS  
16. 328-4985 [1] LATCH AS-DOOR (RH)  
17. 357-0728 [1] HARNESS AS-WINDOW WIPER (LH)  
  297-4169 [2] GROMMET  
  144-0195 E HOSE (119-CM)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [2] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  329-3734 B TAPE-ELECTRICAL  
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)  
18. 357-9183 [1] DOOR AS-CAB (RH)  
  308-2903 M [3] NUT-WELD (M6X1-THD)  
  7Y-9096 M [2] SCREW-TRUSS HEAD (M6X1X6-MM)  
  9X-2042 M [3] SCREW-TRUSS HEAD (M6X1X12-MM)  
19. 357-9187 [1] HANDLE AS-PULL  
20. 357-9188 [1] PLATE  
21. 357-9190 [1] BRACKET AS  
22. 357-9191 [1] BUMPER  
23. 357-9236 [1] GLASS (DOOR)  
24. 357-9260 [1] COVER (WIPER-RH)  
25. 357-9261 [1] COVER-LATCH  
26. 357-9652 Y [1] WIPER GP-WINDOW (DOOR, RH)  
27. 358-9553 [1] LINKAGE  
28. 361-0421 [1] COVER  
29. 372-7541 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
30. 376-4795 [1] HANDLE AS-PULL  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
31. 380-6158 [2] HINGE AS  
    (EACH INCLUDES)
31A. 372-5042 [2] BUSHING  
32. 4E-1384 [1] BUMPER-CONICAL  
33. 114-6658 [4] WASHER (6.5X17X1-MM THK)  
34. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
35. 5C-7261 M [1] NUT (M8X1.25-THD)  
36. 6D-4244 [2] CLIP (LOOP)(SLOT)  
37. 8T-4000 M [2] SCREW-WASHER HEAD (M8X1.25X4.8-MM)  
38. 7X-7729 [12] WASHER (11X25X3-MM THK)  
39. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
40. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
41. 9X-2043 M [13] SCREW-TRUSS HEAD (M6X1X14-MM)  
42. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 9X-2125 M [10] BOLT-LOCKING (M10X1.5X25-MM)  
44. 331-9731 E SEAL (4-CM)  
45. 353-7114 E SEAL (440-CM)  
46. 367-2761 E SEAL (500-CM)  
47. 108-5471 [1] CLEVIS  
48. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
49. 6V-8185 [1] NUT (1/4-20-THD)  
50. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
51. 242-5206 [4] SPACER (6.4X12.5X0.76-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72730679
 

357-9202: DOOR GP-CAB

357-9202 DOOR GP-CAB -LH
S/N E9W1-UP
PART OF 386-1309, 386-1311 CAB GP
AN ATTACHMENT
i04994809 SEBP7273
3579202 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 18M3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 4E-1384 [1] BUMPER-CONICAL  
3. 172-8591 M [3] NUT-CLIP (M6X1-THD)  
4. 6V-7636 [2] PIN AS-SPRING  
5. 108-5471 [1] CLEVIS  
6. 184-0983 M [1] NUT-HEX FLANGE (M12X1.75-THD)  
7. 252-1862 J [1] HANDLE AS-PULL  
8. 252-1863 [1] GASKET  
9. 261-1731 [1] BOOT  
10. 269-2890 [1] CLEVIS  
11. 269-2892 [1] PIN  
12. 269-2893 [1] CLIP  
13. 272-1623 [1] BELLCRANK AS  
14. 285-3692 [1] SPACER-SPECIAL  
15. 295-6406 [1] LATCH AS (LH)  
16. 507-2767 [1] STRIKER AS  
17. 299-1021 Y [1] LEVER GP-CAB DOOR  
18. 299-1660 [1] CABLE AS  
  7S-9930 [2] RING-RETAINING  
  159-0052 [2] PIN-CLEVIS  
19. 328-4984 [1] LATCH AS-DOOR (LH)  
20. 357-0728 [1] HARNESS AS-WINDOW WIPER (LH)  
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)  
  8T-8737 [2] PLUG-SEAL  
  144-0195 E HOSE (119-CM)  
  297-4169 [2] GROMMET  
  329-3734 B TAPE-ELECTRICAL  
21. 357-9184 [1] DOOR AS-CAB (LH)  
  7Y-9096 M [2] SCREW-TRUSS HEAD (M6X1X6-MM)  
  9X-2042 M [3] SCREW-TRUSS HEAD (M6X1X12-MM)  
  308-2903 M [3] NUT-WELD (M6X1-THD)  
22. 357-9187 [1] HANDLE AS-PULL  
23. 357-9188 [1] PLATE  
24. 357-9190 [1] BRACKET AS  
25. 357-9191 [1] BUMPER  
26. 357-9236 [1] GLASS (DOOR)  
27. 357-9257 [1] COVER (WIPER-LH)  
28. 357-9258 [1] COVER-LATCH (LH)  
29. 357-9653 Y [1] WIPER GP-WINDOW (DOOR, LH)  
30. 358-9553 [1] LINKAGE (RH)  
31. 361-0421 [1] COVER  
32. 372-7541 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
33. 376-4796 [1] HANDLE AS-PULL  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
34. 380-6158 [2] HINGE AS  
    (EACH INCLUDES)
34A. 372-5042 [2] BUSHING  
35. 114-6658 [4] WASHER (6.5X17X1-MM THK)  
36. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
37. 5C-7261 M [1] NUT (M8X1.25-THD)  
38. 6D-4244 [2] CLIP (LOOP)(SLOT)  
39. 6V-8185 [1] NUT (1/4-20-THD)  
40. 8T-4000 M [2] SCREW-WASHER HEAD (M8X1.25X4.8-MM)  
41. 7X-7729 [12] WASHER (11X25X3-MM THK)  
42. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
43. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
44. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
45. 9X-2043 M [13] SCREW-TRUSS HEAD (M6X1X14-MM)  
46. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
47. 9X-2125 M [10] BOLT-LOCKING (M10X1.5X25-MM)  
48. 331-9731 E SEAL (4-CM)  
49. 353-7114 E SEAL (440-CM)  
50. 367-2761 E SEAL (500-CM)  
51. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
52. 242-5206 [4] SPACER (6.4X12.5X0.76-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 18M3 :

CONTROL GP-ELECTROHYDRAULIC
272-8442 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-AIR & TEMPERATURE
300-4231 CONTROL GP-AIR & TEMPERATURE
357-9151 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
345-1277 CONTROL & MTG GP-JOYSTICK
CONDENSER GP-REFRIGERANT
389-6379 CONDENSER GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
389-6378 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
507-3868 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
424-0286 COMPRESSOR GP-REFRIGERANT
CONTROL GP-ELECTROHYDRAULIC
344-2764 CONTROL GP-ELECTROHYDRAULIC
360-7615 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-JOYSTICK
348-6995 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
360-2987 CONTROL GP-JOYSTICK
COVER GP-CAB
363-4962 COVER GP-CAB
CUSHION GP-ARM
252-1805 CUSHION GP-ARM
DISPLAY GP-CAMERA
447-2229 DISPLAY GP-CAMERA
DOOR GP-CAB
357-9201 DOOR GP-CAB
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.