BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
BASIC ENGINE
CYLINDER BLOCK GP#SEBP73640060
463-3536: CYLINDER BLOCK AS
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP73640061
202-1258: CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
PART OF 373-0466, 375-4669 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
PART OF 373-0466, 375-4669 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP73640062
373-0466: CYLINDER BLOCK GP
373-0466 CYLINDER BLOCK GP
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-9540 | [2] | DOWEL | |
| 2. | 4N-1650 | [2] | DOWEL | |
| 3. | 4W-8585 | [1] | COVER | |
| 4. | 6I-4303 | [1] | PLATE-BLOCK | |
| 5. | 6I-4024 | [1] | GASKET-PLATE | |
| 6. | 7W-6081 | [1] | GASKET | |
| 7. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 8. | 2M-6471 | [2] | PLUG-CUP | |
| 9. | 151-5925 | [6] | BOLT (7/16-14-THD) | |
| 10. | 151-5928 | [6] | JET AS-PISTON COOLING | |
| 11. | 202-1258 Y | [1] | CYLINDER BLOCK GP | |
| 12. | 030-7571 | [4] | BOLT (3/8-16X1-IN) | |
| 14. | 307-2671 | [1] | PLUG AS | |
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 15. | 309-5131 | [1] | PLUG AS | |
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 16. | 330-9730 | [1] | PLUG AS | |
| 9S-8009 | [1] | PLUG-O-RING | ||
| 238-5083 | [1] | SEAL-O-RING | ||
| 17. | 3S-5496 | [2] | SEAL-O-RING | |
| 18. | 4N-0683 | [4] | DOWEL | |
| 19. | 7W-6534 | [5] | PLUG-PIPE | |
| 20. | 8T-6757 | [3] | PLUG-PIPE | |
| 21. | 8T-6763 | [3] | PLUG-PIPE (1/4-18-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP73640063
375-4669: CYLINDER BLOCK GP
375-4669 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
ALSO AN ATTACHMENT
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-9540 | [2] | DOWEL | |
| 2. | 4N-1650 | [2] | DOWEL | |
| 3. | 4W-8585 | [1] | COVER | |
| 4. | 6I-4303 | [1] | PLATE-BLOCK | |
| 5. | 6I-4024 | [1] | GASKET-PLATE | |
| 6. | 7W-6081 | [1] | GASKET | |
| 7. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 8. | 2M-6471 | [2] | PLUG-CUP | |
| 9. | 151-5925 | [6] | BOLT (7/16-14-THD) | |
| 10. | 202-1258 Y | [1] | CYLINDER BLOCK GP | |
| 11. | 290-6567 | [6] | TUBE AS-OIL JET | |
| 12. | 030-7571 | [4] | BOLT (3/8-16X1-IN) | |
| 14. | 307-2671 | [1] | PLUG AS | |
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 15. | 309-5131 | [1] | PLUG AS | |
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 16. | 330-9730 | [1] | PLUG AS | |
| 9S-8009 | [1] | PLUG-O-RING | ||
| 238-5083 | [1] | SEAL-O-RING | ||
| 17. | 3S-5496 | [2] | SEAL-O-RING | |
| 18. | 4N-0683 | [4] | DOWEL | |
| 19. | 7W-6534 | [5] | PLUG-PIPE | |
| 20. | 8T-6757 | [3] | PLUG-PIPE | |
| 21. | 8T-6763 | [3] | PLUG-PIPE (1/4-18-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP73640064
110-5099: CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
PART OF 214-1667, 350-4421 CYLINDER HEAD GP
ALSO AN ATTACHMENT
PART OF 214-1667, 350-4421 CYLINDER HEAD GP
ALSO AN ATTACHMENT
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-0645 | [12] | PLUG-CUP | |
| 2. | 4N-5893 | [12] | INSERT-VALVE SEAT (INLET)(STANDARD) | |
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 3. | 1W-5283 | [12] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | |
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4. | 2M-6471 | [1] | PLUG-CUP | |
| 5. | 3B-0623 | [10] | PLUG-CUP | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP73640065
214-1667: CYLINDER HEAD GP
214-1667 CYLINDER HEAD GP
PART OF 350-4424 CYLINDER HEAD GP
FOR USE WITH @@@@@214-1666@@@@@, 3406/3406C OVERHAUL & A LA CARTE MATRIX KIT FOR 980F/980F SERIES II WHEEL LOADER
ALSO AN ATTACHMENT
PART OF 350-4424 CYLINDER HEAD GP
FOR USE WITH @@@@@214-1666@@@@@, 3406/3406C OVERHAUL & A LA CARTE MATRIX KIT FOR 980F/980F SERIES II WHEEL LOADER
ALSO AN ATTACHMENT
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-5099 Y | [1] | CYLINDER HEAD GP | |
| 2. | 122-0322 | [12] | VALVE-INLET | |
| 3. | 122-0321 | [12] | VALVE-EXHAUST | |
| 4. | 2A-4429 | [48] | LOCK-RETAINER | |
| 5. | 4W-2474 | [24] | ROTOCOIL AS | |
| 6. | 4W-2471 | [24] | SPRING-VALVE (OUTER) | |
| 7. | 122-7374 | [24] | GUIDE-VALVE (STANDARD) | |
| 121-9859 AB | GUIDE-VALVE (0.13-MM OS) | |||
| 121-9860 AB | GUIDE-VALVE (0.51-MM OS) | |||
| 8. | 4W-2472 | [24] | SPRING-VALVE (INNER) | |
| 9. | 4W-2473 | [24] | WASHER-VALVE SPRING GUIDE | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP73640066
350-4421: CYLINDER HEAD GP
350-4421 CYLINDER HEAD GP
PART OF 373-7398, 455-1813 CYLINDER HEAD GP
PART OF 373-7398, 455-1813 CYLINDER HEAD GP
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-5099 Y | [1] | CYLINDER HEAD GP | |
| 2. | 122-0321 | [12] | VALVE-EXHAUST | |
| 3. | 122-7374 | [24] | GUIDE-VALVE | |
| 121-9859 AB | GUIDE-VALVE (0.13-MM OS) | |||
| 121-9860 AB | GUIDE-VALVE (0.51-MM OS) | |||
| 4. | 122-0322 | [12] | VALVE-INLET | |
| 5. | 2A-4429 | [48] | LOCK-RETAINER | |
| 6. | 6N-7154 | [24] | ROTOCOIL AS | |
| 7. | 4N-5906 | [24] | SPRING-VALVE | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP73640067
350-4424: CYLINDER HEAD GP
350-4424 CYLINDER HEAD GP
ALSO AN ATTACHMENT
ALSO AN ATTACHMENT
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 214-1667 Y | [1] | CYLINDER HEAD GP | |
| 2. | 4S-6137 | [1] | STUD-TAPERLOCK (3/8-16X3.1-IN) | |
| 3. | 100-6920 | [6] | ADAPTER-NOZZLE | |
| 4. | 7L-4774 | [6] | SEAL-O-RING | |
| 5. | 4N-7253 | [6] | GASKET-CHAMBER | |
| 6. | 5F-4899 | [12] | BOLT (3/8-16X5.5-IN) | |
| 7. | 6L-7442 | [6] | STUD-TAPERLOCK (5/16-18X1.08-IN) | |
| 8. | 3E-6772 | [24] | SEAL (WATER) | |
| 9. | 124-1855 | [20] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | |
| 10. | 6I-3066 | [1] | GASKET-CYLINDER HEAD | |
| 11. | 8T-6767 B | [1] | PLUG-PIPE (3/8-18-THD) | |
| 12. | 5H-1504 | [20] | WASHER-HARD (20X33.5X5-MM THK) | |
| 13. | 7W-6492 | [3] | PLUG-PIPE (1/2-14-THD) | |
| 13A. | 7W-6492 B | [1] | PLUG-PIPE (1/2-14-THD) | |
| 14. | 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | |
| 15. | 3S-5496 | [2] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP73640068
373-7398: CYLINDER HEAD GP
373-7398 CYLINDER HEAD GP
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 350-4421 Y | [1] | CYLINDER HEAD GP | |
| 2. | 4S-6137 | [1] | STUD-TAPERLOCK (3/8-16X3.1-IN) | |
| 3. | 100-6920 | [6] | ADAPTER-NOZZLE | |
| 4. | 7L-4774 | [6] | SEAL-O-RING | |
| 5. | 4N-7253 | [6] | GASKET-CHAMBER | |
| 6. | 5F-4899 | [12] | BOLT (3/8-16X5.5-IN) | |
| 7. | 6L-7442 | [6] | STUD-TAPERLOCK (5/16-18X1.08-IN) | |
| 8. | 3E-6772 | [24] | SEAL (WATER) | |
| 9. | 124-1855 | [20] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | |
| 10. | 6I-3066 | [1] | GASKET-CYLINDER HEAD | |
| 12. | 5H-1504 | [20] | WASHER-HARD (20X33.5X5-MM THK) | |
| 13. | 7W-6492 | [3] | PLUG-PIPE (1/2-14-THD) | |
| 14. | 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | |
| 15. | 3S-5496 | [2] | SEAL-O-RING | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP73640069
455-1813: CYLINDER HEAD GP
455-1813 CYLINDER HEAD GP
Parts for your 3406C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6772 | [24] | SEAL (WATER) | |
| 2. | 4N-7253 | [6] | GASKET-CHAMBER | |
| 3. | 6I-3066 | [1] | GASKET-CYLINDER HEAD | |
| 4. | 6I-4025 | [20] | FASTENER GP-CYLINDER HEAD | |
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 5. | 100-6920 | [6] | ADAPTER-NOZZLE | |
| 6. | 350-4421 Y | [1] | CYLINDER HEAD GP | |
| 7. | 106-1792 | [12] | STUD-TAPERLOCK (3/8-16X4-IN) | |
| 8. | 3S-5496 | [2] | SEAL-O-RING | |
| 9. | 5F-4899 | [12] | BOLT (3/8-16X5.5-IN) | |
| 10. | 6L-7442 | [6] | STUD-TAPERLOCK (5/16-18X1.08-IN) | |
| 11. | 7L-4774 | [6] | SEAL-O-RING | |
| 12. | 7W-6492 | [3] | PLUG-PIPE (1/2-14-THD) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Specifications
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Caterpillar Parts SIS Catalog 3406C :
Truck sale:
65,000
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
43,000
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC



