AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-7325 GOVERNOR GP PART OF 371-4702, 371-4703, 380-6262, 380-6267 PUMP GP-GOV & FUEL INJ 3406C INDUSTRIAL ENGINE


FUEL SYSTEM
GOVERNOR GP
FILTER GP-FUEL
LINES GP-FUEL INJECTION

INDUSTRIAL ENGINE 3406C INDUSTRIAL ENGINE 5H9
 3406C Industrial Engine 5H900001-UP SEBP7365 3406C 5H9   (2014)

FUEL SYSTEM

GOVERNOR GP
ACTUATOR GP-AIR
5N-3220 ACTUATOR GP-AIR
DRIVE GP-GOVERNOR & FUEL PUMP
110-1282 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
119-8434 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP
2W-7325 GOVERNOR GP
PROTECTION GP-FUEL SYSTEM
128-7985 PROTECTION GP-FUEL SYSTEM
PUMP GP-GOV & FUEL INJ
371-4702 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
371-4703 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
380-6262 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
380-6267 PUMP GP-GOV & FUEL INJ
 

#SEBP73650190
 

2W-7325: GOVERNOR GP

2W-7325 GOVERNOR GP
PART OF 371-4702, 371-4703, 380-6262, 380-6267 PUMP GP-GOV & FUEL INJ
i05509660 SEBP7365
2W7325 GOVERNOR GP Parts scheme 2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3256 [1] COLLAR-LOAD STOP  
2. 8L-5832 [2] NUT-HEX (10-32-THD)  
3. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 7W-5836 C [1] BOLT AS-SPECIAL (STOP)  
  7W-5835 [1] COLLAR  
7. 6D-3897 [1] BOLT (8-32X0.5-IN)  
8. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
9. 8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
10. 9S-8003 [1] PLUG (1/2-20-THD)  
11. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
12. 6V-5029 [1] SEAL-LIP TYPE  
13. 1N-3935 [1] COVER (IDLE-SPEED ADJ)  
14. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
15. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
16. 3P-0009 [1] INSULATOR  
17. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
18. 8N-3762 [1] COVER  
19. 7W-1749 [1] COVER AS  
  8S-6814 [2] PIN  
19A. 138-9507 [1] SEAL-LIP TYPE  
20. 1B-2713 [6] BOLT (1/4-20X1.75-IN)  
21. 4W-5735 [1] LEVER AS-PIVOT  
21A. 115-1249 [1] SETSCREW-SOCKET  
21B. 8L-5832 [1] NUT-HEX (10-32-THD)  
  4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
22. 8H-9204 [1] WASHER-FELT (19/32X7/8X5/16-IN THK)  
23. 2W-7400 C [1] SPRING  
24. 7N-1052 [1] DOWEL  
25. 7N-2176 [1] PIN-DETENT  
26. 4N-5621 [1] SHAFT-SHUTOFF  
27. 144-0480 [1] GASKET  
28. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
29. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
30. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
31. 8N-3760 [1] COVER  
32. 7W-4247 C [1] HOUSING AS-GOVERNOR  
32A. 8N-2499 [1] SPRING-GUIDE  
32B. 3D-8317 [1] RING-RETAINING  
32C. 4N-0260 [1] SEAL-LIP TYPE  
33. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
34. 8S-7803 [1] RING-RETAINING  
35. 2W-0801 [1] SHAFT  
36. 9A-7377 [1] VALVE AS-NEEDLE (THROTTLE RESPONSE)  
  4N-5485 [1] BODY-VALVE  
36A. 6H-9691 [1] SEAL-O-RING  
36B. 5F-9144 [1] SEAL-O-RING  
36C. 4N-5484 [1] VALVE-NEEDLE  
37. 1J-9671 [1] SEAL-O-RING  
38. 1W-5341 [1] LEVER-SHUTOFF  
39. 2M-7819 [3] RING-RETAINING  
40. 7N-7270 [2] SLEEVE-SPRING  
41. 2W-2216 [1] SPRING-LINK  
42. 1N-3800 [1] SLEEVE-RACK CONTROL  
43. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
44. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  5P-9757 [1] SEAL-O-RING  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
  7C-0790 [1] CYLINDER AS  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
45. 2W-0799 [1] SPRING-SHUTOFF  
46. 2W-0800 [1] LEVER-SHUTOFF  
47. 1N-3802 [1] SEAT-SPRING  
48. 1S-5440 [4] DOWEL  
49. 7M-7219 [1] BEARING-THRUST  
50. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
51. 4N-9019 [1] DOWEL  
52. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
53. 4N-2953 [1] RING-LOCK  
54. 133-8890 [2] RACE-NEEDLE BEARING  
55. 7E-3986 C [1] CARRIER-WEIGHT  
56. 119-8699 [4] WEIGHT-GOVERNOR  
57. 4N-0432 [1] BALL BEARING  
58. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
59. 4W-6868 C [1] RISER-GOVERNOR  
60. 3K-5733 [1] SPRING  
61. 7N-7269 [1] ACTUATOR AS-GOVERNOR  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  7N-7268 [1] SEAT-SPRING  
  4N-6410 [1] SPRING-DASHPOT  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
62. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
63. 6N-3504 [1] SEAT-GOVERNOR SPRING  
64. 7N-8821 [2] RING-RETAINING  
65. 1W-5339 [1] SHAFT AS-GOVERNOR  
66. 7W-1321 C [1] PLATE-THROTTLE (UPPER)  
67. 2W-9305 C [1] PLATE-THROTTLE (LOWER)  
68. 2W-6102 [1] LEVER-SPRING SEAT  
69. 5H-2532 [1] KEY-WOODRUFF  
70. 2W-9996 [1] SCREW-IDLE STOP (1/4-20X1.25-IN)  
71. 7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
72. 6V-8137 C [2] SCREW-BUTTON HEAD (10-24X1-IN)  
73. 7W-2000 C [1] STOP-DETENT  
74. 7W-1318 C [1] PLATE-RETAINING  
75. 2N-0828 [2] WASHER (SPRING)  
76. 5B-3180 [1] NUT (5/16-18-THD)  
77. 144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
78. 4K-9890 [1] WASHER (8.6X17.3X1.6-MM THK)  
79. 144-0478 [1] GASKET  
80. 8N-3761 [1] GASKET  
81. 8C-8564 [4] SCREW-LOCK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP73650191
 

2W-3452: LINES GP-FUEL FILTER

2W-3452 LINES GP-FUEL FILTER
Type 1
i05521510 SEBP7365
2W3452 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-7214 [1] ADAPTER-ELBOW  
2. 3J-1907 C [7] SEAL-O-RING  
3. 9S-4182 [1] PLUG (7/16-20-THD)  
4. 3J-7354 [1] SEAL-O-RING  
5. 030-7947 [4] ADAPTER-ELBOW  
6. 1B-4203 C [2] NUT-FULL (3/8-24-THD)  
7. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 5P-8783 C [2] STUD (3/8-24X1.67-IN)  
9. 2W-2927 [1] TUBE AS  
10. 1B-4330 [3] NUT (1/4-20-THD)  
11. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 4F-7957 [3] BOLT (1/4-20X0.875-IN)  
13. 5M-5926 [6] CLAMP  
14. 2W-6458 [1] TUBE AS  
15. 2R-6806 [2] CONNECTOR  
16. 2W-3454 [1] TUBE AS  
17. 1D-4716 [2] NUT-FULL (5/16-18-THD)  
18. 2W-3456 [1] JUNCTION BLOCK  
19. 0L-2070 C [1] BOLT (3/8-16X2.25-IN)  
20. 2W-3455 [1] BRACKET  
21. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
22. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
23. 2W-3453 [1] TUBE AS  
24. 2B-2694 [2] BOLT (5/16-18X2-IN)  
25. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP73650192
 

2W-3452: LINES GP-FUEL FILTER

2W-3452 LINES GP-FUEL FILTER
Type 2
i05509579 SEBP7365
2W3452 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 364-9216 [1] ELBOW AS  
  7C-6459 [1] ELBOW-FLARED  
  214-7568 [1] SEAL-O-RING  
2. 2W-2927 [1] TUBE AS  
3. 2W-6458 [1] TUBE AS  
4. 3S-7189 C [1] BRACKET  
5. 0L-1351 C [1] BOLT (3/8-16X0.875-IN)  
6. 0S-1617 C [1] BOLT (5/16-18X0.75-IN)  
7. 191-7805 C [3] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
9. 307-2671 [1] PLUG AS  
  9S-8002 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
10. 313-9614 C [1] ADAPTER AS  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
11. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
12. 3E-4352 C [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
13. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
14. 4F-7957 C [1] BOLT (1/4-20X0.875-IN)  
15. 5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 5M-5926 C [2] CLAMP  
17. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 5P-8783 [2] STUD (3/8-24X1.67-IN)  
19. 5P-9297 C [1] CLIP (LOOP)  
20. 9S-8750 [1] NUT-FULL (1/4-20-THD)  
21. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
22. 9X-6458 C [2] WASHER-HARD (10.2X22.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP73650193
 

2W-3457: LINES GP-FUEL FILTER

2W-3457 LINES GP-FUEL FILTER
FOR USE WITH @@@@@ 8H-7204@@@@@
i05540114 SEBP7365
2W3457 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-8037 C [1] ELBOW  
2. 2W-3458 [1] PLATE  
3. 0S-1594 [4] BOLT (3/8-16X1-IN)  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 5N-2368 CI [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP73650194
 

373-0491: LINES GP-FUEL FILTER

373-0491 LINES GP-FUEL FILTER
i05567403 SEBP7365
3730491 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2927 [1] TUBE AS  
2. 2W-6458 [1] TUBE AS  
3. 3S-7189 [1] BRACKET  
4. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
5. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
6. 191-7805 [3] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
7. 214-7568 [1] SEAL-O-RING  
8. 313-9614 [1] ADAPTER AS  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
9. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
10. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
11. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
12. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
13. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 5M-5926 [2] CLAMP  
15. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 5P-8783 [2] STUD (3/8-24X1.67-IN)  
17. 5P-9297 [1] CLIP (LOOP)  
18. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 9S-8750 [1] NUT-FULL (1/4-20-THD)  
20. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
 

#SEBP73650195
 

379-5841: LINES GP-FUEL FILTER

379-5841 LINES GP-FUEL FILTER
i05541052 SEBP7365
3795841 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2927 [1] TUBE AS  
2. 2W-6458 [1] TUBE AS  
3. 3S-7189 [1] BRACKET  
4. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
5. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
6. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
7. 191-7805 [3] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
8. 214-7568 [1] SEAL-O-RING  
9. 313-9614 [1] ADAPTER AS  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
10. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
11. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
12. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
13. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
14. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 5M-5926 [2] CLAMP  
16. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 5P-8783 [2] STUD (3/8-24X1.67-IN)  
18. 5P-9297 [1] CLIP (LOOP)  
19. 9S-8750 [1] NUT-FULL (1/4-20-THD)  
20. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
 

#SEBP73650196
 

119-5979: LINES GP-FUEL INJECTION

119-5979 LINES GP-FUEL INJECTION
PART OF 375-9565 ENGINE AR-CORE
i05649232 SEBP7365
1195979 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 Y [1] LINES GP-FUEL INJECTION (CYL NO. 1)  
2. 4P-9659 Y [1] LINES GP-FUEL INJECTION (CYL NO. 3)  
3. 4P-9660 Y [1] LINES GP-FUEL INJECTION (CYL NO. 5)  
4. 178-1318 [6] ADAPTER AS  
    (EACH INCLUDES)
  117-1385 [1] SEAL-O-RING  
5. 104-3377 [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
  9L-9098 [1] SEAL-CARBON STOP  
  7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
  271-2489 [1] SEAL-WASHER  
  9X-2836 [1] SCREW-BUTTON HEAD  
6. 185-2831 [6] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
7. 7W-2315 [6] RETAINER  
8. 9L-9814 [6] LOCKNUT  
9. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
10. 7C-9198 [3] BLOCK  
11. 0S-1615 [6] BOLT (1/4-20X0.75-IN)  
12. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 1A-9579 [3] BOLT (5/16-18X1.5-IN)  
14. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
15. 0S-1618 [2] BOLT (5/16-18X1-IN)  
16. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
17. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
18. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
19. 141-2675 [1] BRACKET  
20. 141-2676 [1] BRACKET AS  
21. 141-2674 [1] BRACKET  
22. 141-2672 [1] BRACKET  
23. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP73650197
 

130-5193: LINES GP-FUEL INJECTION

130-5193 LINES GP-FUEL INJECTION
PART OF 375-6184 ENGINE AR-CORE
i05640708 SEBP7365
1305193 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 Y [1] LINES GP-FUEL INJECTION  
2. 4P-9659 Y [1] LINES GP-FUEL INJECTION  
3. 4P-9660 Y [1] LINES GP-FUEL INJECTION  
4. 178-1318 [6] ADAPTER AS  
    (EACH INCLUDES)
  117-1385 [1] SEAL-O-RING  
5. 130-5190 [6] NOZZLE AS  
    (EACH INCLUDES)
  7W-4487 [1] WASHER-SPECIAL (9.76X17.14X1.27-MM THK)  
  9L-9098 [1] SEAL-CARBON STOP  
  9X-2836 [1] SCREW-BUTTON HEAD  
  114-3362 [1] SEAL-O-RING  
  271-2489 [1] SEAL-WASHER  
6. 185-2831 [6] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
7. 7W-2315 [6] RETAINER  
8. 9L-9814 [6] LOCKNUT  
9. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
10. 7C-9198 [3] BLOCK  
11. 0S-1615 [6] BOLT (1/4-20X0.75-IN)  
12. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 1A-9579 [3] BOLT (5/16-18X1.5-IN)  
14. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
15. 0S-1618 [2] BOLT (5/16-18X1-IN)  
16. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
17. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
18. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
19. 141-2675 [1] BRACKET  
20. 141-2676 [1] BRACKET AS  
21. 141-2674 [1] BRACKET  
22. 141-2672 [1] BRACKET  
23. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP73650198
 

131-0188: LINES GP-FUEL INJECTION

131-0188 LINES GP-FUEL INJECTION
PART OF 386-2101 ENGINE AR-CORE
i05645691 SEBP7365
1310188 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 Y [1] LINES GP-FUEL INJECTION  
2. 4P-9659 Y [1] LINES GP-FUEL INJECTION  
3. 4P-9660 Y [1] LINES GP-FUEL INJECTION  
4. 178-1318 [6] ADAPTER AS  
    (EACH INCLUDES)
4A. 117-1385 [1] SEAL-O-RING  
5. 130-5187 [6] NOZZLE AS  
    (EACH INCLUDES)
5A. 9L-9098 [1] SEAL-CARBON STOP  
5B. 4W-3917 [1] CHECK-INJECTION VALVE  
5C. 7W-4487 [1] WASHER-SPECIAL (9.76X17.14X1.27-MM THK)  
5D. 271-2489 [1] SEAL-WASHER  
5E. 9X-2836 [1] SCREW-BUTTON HEAD  
5F. [1] TIP AS-FUEL VALVE  
5G. 114-3362 [1] SEAL-O-RING  
6. 185-2831 [6] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
7. 7W-2315 [6] RETAINER  
8. 9L-9814 [6] LOCKNUT  
9. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
10. 7C-9198 [3] BLOCK  
11. 0S-1615 [6] BOLT (1/4-20X0.75-IN)  
12. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 1A-9579 [3] BOLT (5/16-18X1.5-IN)  
14. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
15. 0S-1618 [2] BOLT (5/16-18X1-IN)  
16. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
17. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
18. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
19. 141-2675 [1] BRACKET  
20. 141-2676 [1] BRACKET AS  
21. 141-2674 [1] BRACKET  
22. 141-2672 [1] BRACKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP73650199
 

4P-9658: LINES GP-FUEL INJECTION

4P-9658 LINES GP-FUEL INJECTION
PART OF 119-5979, 130-5193, 131-0188 LINES GP-FUEL INJECTION
i05511389 SEBP7365
4P9658 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-7941 [1] LINE AS-FUEL INJECTION (NO.1 CYLINDER)  
2. 191-7942 [1] LINE AS-FUEL INJECTION (NO.2 CYLINDER)  
3. 1W-9169 [2] CLAMP-FUEL LINE (THREADED)  
  5P-4939 [2] SCREW-MACHINE (10-24X15.88-IN)  
4. 1W-9168 [7] CLAMP-FUEL LINE (NON-THREADED)  
5. 7M-9831 [3] SCREW-MACHINE (10-24X0.88-IN)  
6. 6V-7699 [6] WASHER-HARD (5.5X13X1.6-MM THK)  
7. 4B-2047 [3] NUT (10-24-THD)  
8. 1W-9167 [1] CLAMP AS-FUEL LINE  
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
 

Information:

Specifications
Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor and Fuel Pump Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Systems Operation
Installation And Operation
2301A SPEED CONTROL
Testing and Adjusting
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL

Caterpillar Parts SIS Catalog 3406C :

FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
DRIVE GP-TACHOMETER
4W-1101 DRIVE GP-TACHOMETER
DRIVE GP-GOVERNOR & FUEL PUMP
119-8434 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
110-1282 DRIVE GP-GOVERNOR & FUEL PUMP
COVER GP-FUEL TRANSFER
358-6186 COVER GP-FUEL TRANSFER
CONTROL GP-GOVERNOR
9N-1822 CONTROL GP-GOVERNOR
LINES GP-FUEL FILTER
2W-3452 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
2W-3452 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
2W-3457 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
373-0491 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
379-5841 LINES GP-FUEL FILTER
LINES GP-FUEL INJECTION
119-5979 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
130-5193 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
131-0188 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 3406C
 
Caterpillar 3406C
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
 
65,000 
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3406C, Stationary Generator Sets, Construction
43,000 
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3406 C, Industrial engines, Construction
42,500 
Caterpillar 3406 C, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Caterpillar 3406 C, Industrial engines, Construction
59,500 
Caterpillar 3406 C, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.