362-1694 TURBOCHARGER GP -LOW PRESSURE PART OF 355-1122 TURBOCHARGER GP AN ATTACHMENT C18 INDUSTRIAL ENGINE

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

0. 362-1694 TURBOCHARG
1. 450-3344 TURBOCHARG

VALVE GP-CONTROL

2. 347-9433 VALVE & MO
3. 337-7323 VALVE GP-E

FUEL SYSTEM

FILTER GP-FUEL

4. 343-8126 BASE GP-FU

LINES GP-FUEL

5. 353-2831 FASTENER G

FILTER GP-FUEL

6. 342-0612 FILTER GP-
7. 342-0612 FILTER GP-
8. 212-9580 FILTER GP-

LINES GP-FUEL

9. 353-1661 FITTING GP
0. INFORMATION

INDUSTRIAL ENGINE C18 INDUSTRIAL ENGINE ZPS
C18 Industrial Engine ZPS00001-UP SEBP7399 C18 ZPS (2013)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

355-6054 LINES GP-TURBOCHARGER OIL

365-5145 CARTRIDGE GP-TURBOCHARGER

356-2991 LINES GP-TURBOCHARGER

355-7052 SHIELD GP-HEAT

355-1122 TURBOCHARGER GP

362-1693 TURBOCHARGER GP

362-1694 TURBOCHARGER GP

450-3344 TURBOCHARGER GP

#SEBP73990120

362-1694: TURBOCHARGER GP

TURBOCHARGER GP

362-1694 TURBOCHARGER GP -LOW PRESSURE
PART OF 355-1122 TURBOCHARGER GP
AN ATTACHMENT

i04303241 SEBP7399

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	365-5111	[1]	CARTRIDGE GP-TURBOCHARGER
2.	365-5147	[1]	HOUSING
3.	268-2960	[1]	CLAMP AS (COMPRESSOR)
4.	351-9434	[4]	STUD-TAPERLOCK
5.	9N-2038	[1]	CLAMP AS-TURBINE

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

#SEBP73990121

450-3344: TURBOCHARGER GP

TURBOCHARGER GP

450-3344 TURBOCHARGER GP
PART OF 355-1122 TURBOCHARGER GP
AN ATTACHMENT

i05899151 SEBP7399

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	365-5145 Y	[1]	CARTRIDGE GP-TURBOCHARGER
2.	450-0558	[1]	HOUSING AS-TURBINE
3.	239-5858	[1]	CLAMP AS-COMPRESSOR
4.	365-5151	[1]	CLAMP-BAND (TURBINE)
	Y		SEPARATE ILLUSTRATION

#SEBP73990122

347-9433: VALVE & MOUNTING GP (NRS)

VALVE & MOUNTING GP (NRS)

347-9433 VALVE & MOUNTING GP (NRS)

i03820956 SEBP7399

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	337-7323 Y	[1]	VALVE GP-EXHAUST GAS (NRS)
2.	6V-3821 M	[3]	BOLT (M8X1.25X110-MM)
3.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP73990123

337-7323: VALVE GP-EXHAUST GAS (NRS)

VALVE GP-EXHAUST GAS (NRS)

337-7323 VALVE GP-EXHAUST GAS (NRS)
RECIRCULATION
PART OF 347-9433 VALVE & MOUNTING GP (NRS)

i03828678 SEBP7399

3377323 VALVE GP-EXHAUST GAS (NRS) Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	338-1913 Y	[1]	ACTUATOR GP-ROTARY (NOX REDUCTION SYSTEM)
2.	340-7208	[1]	VALVE GP-EXHAUST GAS (NRS)
	7X-4744	[1]	SEAL-O-RING
3.	297-1003 M	[4]	BOLT-SOCKET HEAD (M8X1.25X45-MM)
4.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP73990124

343-8126: BASE GP-FUEL FILTER

BASE GP-FUEL FILTER

343-8126 BASE GP-FUEL FILTER
PART OF 342-0612 FILTER GP-FUEL
AN ATTACHMENT

i03828187 SEBP7399

3438126 BASE GP-FUEL FILTER Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	123-0783 Y	[1]	VALVE GP-FLUID SAMPLING (FUEL)
2.	234-5013 Y	[1]	SENSOR GP-TEMPERATURE (FUEL)
3.	325-8634 Y	[1]	SENSOR GP-PRESSURE (FUEL)
4.	348-7307	[1]	BASE AS-FUEL FILTER
	9S-4167	[2]	STUD-HOLLOW (1-14X1.47-IN)
5.	1R-0749	[2]	FILTER-FUEL (ADVANCED EFFICIENCY)
6.	386-6235	[1]	CONNECTOR AS
6A.	214-7567	[1]	SEAL-O-RING
	5P-1318	[1]	ADAPTER
7.	8L-2786	[1]	SEAL-O-RING
8.	9S-8005	[1]	PLUG (3/4-16-THD)
	Y		SEPARATE ILLUSTRATION

#SEBP73990125

353-2831: FASTENER GP-FUEL LINES

FASTENER GP-FUEL LINES

353-2831 FASTENER GP-FUEL LINES
PROVIDES 3/8-16 THREAD MOUNTING STUD FOR ON ENGINE FUEL LINE CLIPPING POINT AT LEFT HAND SIDE REAR, LOW BOSS LOCATION
FOR USE WITH FUEL LINES GROUP 350-5230
CANNOT BE USED WITH LEFT REAR OIL GAUGE GROUP 353-3353
AN ATTACHMENT

i03964894 SEBP7399

3532831 FASTENER GP-FUEL LINES Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	222-9151	[1]	WASHER-HARD (11X32X5-MM THK)
2.	129-3172	[1]	STUD-MOUNTING (3/8-16X1.564-IN)
3.	9X-6458	[1]	WASHER-HARD (10.2X22.5X3-MM THK)

#SEBP73990126

342-0612: FILTER GP-FUEL

FILTER GP-FUEL

342-0612 FILTER GP-FUEL
PROVIDES DUAL CANISTER STYLE FUEL SUPPLY FILTRATION. FOR LEFT HAND SIDE MID SERVICE ACCESS
Type 1
FOR USE WITH @@@@@352-3726@@@@@, @@@@@352-9442@@@@@, COMPRESSOR GP-AIR & DRIVE GP-ACC
AN ATTACHMENT

i04047607 SEBP7399

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	249-2943	[2]	STUD (3/8-16-THD)
2.	343-8126 Y	[1]	BASE GP-FUEL FILTER
3.	0S-1588	[3]	BOLT (3/8-16X1.25-IN)
4.	118-4728	[1]	ELBOW
5.	238-5080	[1]	SEAL-O-RING
6.	238-5081	[1]	SEAL-O-RING
7.	307-2673	[1]	PLUG AS
	9S-8005	[1]	PLUG (3/4-16-THD)
	238-5080	[1]	SEAL-O-RING
8.	309-5131	[1]	PLUG AS
	9S-8006	[1]	PLUG (7/8-14-THD)
	238-5081	[1]	SEAL-O-RING
9.	5M-2894	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	6K-3607	[1]	CONNECTOR
	Y		SEPARATE ILLUSTRATION

#SEBP73990127

342-0612: FILTER GP-FUEL

FILTER GP-FUEL

342-0612 FILTER GP-FUEL
PROVIDES DUAL CANISTER STYLE FUEL SUPPLY FILTRATION. FOR LEFT HAND SIDE MID SERVICE ACCESS
Type 2
FOR USE WITH @@@@@352-3726@@@@@, @@@@@352-9442@@@@@, COMPRESSOR GP-AIR & DRIVE GP-ACC
AN ATTACHMENT

i06105383 SEBP7399

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-0003	[5]	NUT (5/16-18-THD)
2.	343-8126 Y	[1]	BASE GP-FUEL FILTER
3.	3E-4352	[10]	WASHER-HARD (8.8X20.5X2.5-MM THK)
4.	118-4728	[1]	ELBOW
5.	238-5080	[1]	SEAL-O-RING
6.	238-5081	[1]	SEAL-O-RING
7.	307-2673	[1]	PLUG AS
	9S-8005	[1]	PLUG (3/4-16-THD)
	238-5080	[1]	SEAL-O-RING
8.	309-5131	[1]	PLUG AS
	9S-8006	[1]	PLUG (7/8-14-THD)
	238-5081	[1]	SEAL-O-RING
9.	6K-3607	[1]	CONNECTOR
	Y		SEPARATE ILLUSTRATION

#SEBP73990128

212-9580: FILTER GP-WATER SEP & FUEL

FILTER GP-WATER SEP & FUEL

212-9580 FILTER GP-WATER SEP & FUEL
PART OF 360-1693 PUMP GP-FUEL PRM & PRIM FILTER, 213-4740 PUMP GP-FUEL PRM & WATER SEP
AN ATTACHMENT

i02116147 SEBP7399

2129580 FILTER GP-WATER SEP & FUEL Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	326-1643	[1]	FILTER AS-WATER SEP & FUEL (PRIMARY)
1A.	220-8678	[1]	SEAL-RING (FUEL FILTER)
2.	343-5527	[1]	BOWL AS
2A.	3J-1907 J	[1]	SEAL-O-RING
2B.	5F-9144	[1]	SEAL-O-RING
2C.	8F-7219	[1]	SEAL-O-RING
2D.	9S-8004 J	[1]	PLUG (9/16-18-THD)
	J		PARTS MARKED J ARE USED WITH BOWL ASSEMBLY WHEN PLASTIC PLUG IS NOT USED.

#SEBP73990129

353-1661: FITTING GP-FUEL LINES

FITTING GP-FUEL LINES

353-1661 FITTING GP-FUEL LINES -RETURN
PROVIDES A 3/4-16 THD JIC CONNECTION FOR FUEL LINE FROM ENGINE TO TANK
AN ATTACHMENT

i03947891 SEBP7399

3531661 FITTING GP-FUEL LINES Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	307-9615	[1]	ADAPTER AS
	8M-0505	[1]	ADAPTER
	238-5080	[1]	SEAL-O-RING

Information:

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

Engine News

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}

New Heat Shields are Now Used on Certain C18 Engines {1073}
New Heat Shields are Now Used on Certain C18 Engines {1073}

Special Instruction

Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}

Specifications

Turbocharger
C18 Locomotive Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}

Testing and Adjusting

Turbocharger - Inspect
C18 Industrial Engine

Troubleshooting

Exhaust Balance Valve - Test
C18 Industrial Engine

Disassembly and Assembly

Solenoid Valve (Exhaust Balance) - Remove and Install
C18 Locomotive Engine

Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications
C18 Locomotive Engine

Turbocharger - Remove and Install - High Pressure, For Series Turbocharger Applications
C18 Locomotive Engine

Service Magazine

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog C18 :

362-1693 TURBOCHARGER GP

355-1122 TURBOCHARGER GP

342-6150 SUPPORT & MOUNTING GP

355-7052 SHIELD GP-HEAT

349-8472 PRECOOLER GP

456-5635 MODULE AR-CLEAN EMISSIONS

399-9860 MODULE AR-CLEAN EMISSIONS

450-3344 TURBOCHARGER GP

347-9433 VALVE & MOUNTING GP (NRS)

337-7323 VALVE GP-EXHAUST GAS (NRS)

343-8126 BASE GP-FUEL FILTER

353-2831 FASTENER GP-FUEL LINES

342-0612 FILTER GP-FUEL

212-9580 FILTER GP-WATER SEP & FUEL

Truck sale:

89,000 USD

Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

34,700

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

34,800

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

32,850

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

36,800

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates