AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

359-4070 INJECTOR GP-FUEL HAS 6 HOLE TIP WITH SPRAY ANGLE 130 DEGREES AND NOZZLE STEADY FLOW 4.10A0.060 KG/MIN PART OF 366-2077 PUMP GP-FUEL INJECTION FOR USE WITH ELEC (500/455 EKW), INDUSTRIAL A, INDUSTRIAL B, INDUSTRIAL C, AGCO MT865/965 , AGCO MT875/975, INDUSTRIAL D, INDUSTRIAL E FORAGE HARVESTOR C18


FUEL SYSTEM
LINES GP-FUEL INJECTION
LINES GP-FUEL
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING

INDUSTRIAL ENGINE C18 INDUSTRIAL ENGINE ZPS
 C18 Industrial Engine ZPS00001-UP SEBP7399 C18 ZPS   (2013)

FUEL SYSTEM

LINES GP-FUEL INJECTION
INJECTOR GP-FUEL
359-4070 INJECTOR GP-FUEL
 

#SEBP73990130
 

359-4070: INJECTOR GP-FUEL

359-4070 INJECTOR GP-FUEL
HAS 6 HOLE TIP WITH SPRAY ANGLE 130 DEGREES AND NOZZLE STEADY FLOW 4.10A0.060 KG/MIN
PART OF 366-2077 PUMP GP-FUEL INJECTION
FOR USE WITH ELEC (500/455 EKW), INDUSTRIAL A, INDUSTRIAL B, INDUSTRIAL C, AGCO MT865/965 , AGCO MT875/975, INDUSTRIAL D, INDUSTRIAL E FORAGE HARVESTOR
i04402356 SEBP7399
3594070 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-3728 [1] SEAL-O-RING  
2. 230-3775 [1] SEAL-O-RING  
3. 9X-7317 [1] SEAL-O-RING  
 

#SEBP73990131
 

350-5230: LINES GP-FUEL

350-5230 LINES GP-FUEL
PROVIDES FUEL SUPPLY FOR ENGINE COMBUSTION. RIGHT HAND SIDE MID MOUNT FUEL FILTER. SIZED TO PROVIDE 90 KPA MAX PRESSURE. DROP AT 8 LPM FLOW.
Type 1
FOR USE WITH @@@@@342-0612@@@@@, @@@@@338-1575@@@@@, COMPRESSOR GP-AIR OR DRIVE GP-ACC
AN ATTACHMENT
i04401470 SEBP7399
3505230 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7233 [2] GROMMET  
2. 191-7805 [1] ELBOW AS  
  030-7947 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
3. 313-9614 [2] ADAPTER AS  
    (EACH INCLUDES)
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
4. 330-7736 I [1] HOSE AS  
5. 342-7329 [1] LINE-FUEL  
6. 344-7826 [1] MANIFOLD-FUEL  
7. 344-7865 [1] TUBE AS-FUEL SUPPLY  
8. 352-8928 Y [1] REGULATOR GP-FUEL PRESSURE  
9. 353-5134 [1] ELBOW AS  
  118-4728 [1] ELBOW  
  238-5080 [1] SEAL-O-RING  
10. 356-0419 [1] LINE-FUEL  
11. 367-7300 [1] HOSE AS  
12. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
13. 0S-1618 [2] BOLT (5/16-18X1-IN)  
14. 183-3407 [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
15. 1B-2713 [2] BOLT (1/4-20X1.75-IN)  
16. 332-8555 [1] ADAPTER AS  
  8M-0506 [1] ADAPTER-O-RING  
  214-7568 [1] SEAL-O-RING  
17. 349-1209 [1] CLIP  
18. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
19. 353-5111 [1] ADAPTER AS  
  7D-9984 [1] ELBOW  
  238-5080 [1] SEAL-O-RING  
20. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
21. 164-0150 [1] SPACER (9X20X20-MM THK)  
22. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
24. 5P-8939 [1] GROMMET  
25. 5S-0003 [1] NUT (5/16-18-THD)  
26. 8T-1887 [2] CLIP (SLOT)  
27. 8T-1888 [2] CLIP (TAB)  
28. 8T-1889 [1] CLIP (SLOT)  
29. 8T-1890 [1] CLIP (TAB)  
30. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
32. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
33. 7W-9094 [1] SPACER (11X20X9-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP73990132
 

350-5230: LINES GP-FUEL

350-5230 LINES GP-FUEL
PROVIDES FUEL SUPPLY FOR ENGINE COMBUSTION. RIGHT HAND SIDE MID MOUNT FUEL FILTER. SIZED TO PROVIDE 90 KPA MAX PRESSURE. DROP AT 8 LPM FLOW.
Type 2
FOR USE WITH @@@@@342-0612@@@@@, @@@@@338-1575@@@@@, COMPRESSOR GP-AIR OR DRIVE GP-ACC
AN ATTACHMENT
i06786046 SEBP7399
3505230 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7233 [2] GROMMET  
2. 191-7805 [1] ELBOW AS  
  030-7947 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
3. 313-9614 [2] ADAPTER AS  
    (EACH INCLUDES)
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
4. 330-7736 I [1] HOSE AS  
5. 342-7329 [1] LINE-FUEL  
6. 344-7826 [1] MANIFOLD-FUEL  
7. 344-7865 [1] TUBE AS-FUEL SUPPLY  
8. 352-8928 Y [1] REGULATOR GP-FUEL PRESSURE  
9. 353-5134 [1] ELBOW AS  
  118-4728 [1] ELBOW  
  238-5080 [1] SEAL-O-RING  
10. 356-0419 [1] LINE-FUEL  
11. 383-3550 CI [1] HOSE AS  
12. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
13. 0S-1618 [2] BOLT (5/16-18X1-IN)  
14. 183-3407 [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
15. 1B-2713 [2] BOLT (1/4-20X1.75-IN)  
16. 439-1963 C [1] ELBOW AS  
  439-1962 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
17. 349-1209 [1] CLIP  
18. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
19. 353-5111 [1] ADAPTER AS  
  7D-9984 [1] ELBOW  
  238-5080 [1] SEAL-O-RING  
20. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
21. 164-0150 [1] SPACER (9X20X20-MM THK)  
22. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
24. 5P-8939 [1] GROMMET  
25. 5S-0003 [1] NUT (5/16-18-THD)  
26. 8T-1887 [2] CLIP (SLOT)  
27. 8T-1888 [2] CLIP (TAB)  
28. 8T-1889 [1] CLIP (SLOT)  
29. 8T-1890 [1] CLIP (TAB)  
30. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
32. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
33. 7W-9094 [1] SPACER (11X20X9-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP73990133
 

354-8053: LINES GP-FUEL PRIMING

354-8053 LINES GP-FUEL PRIMING
PROVIDES 24 VOLT ON ENGINE LH SIDE PRIMARY FILTER WITH AUTO PRIMING PUMP WITHOUT CRS. PROVIDES A 7/8-14 STOR PORT FOR CUSTOMER FUEL SUPPLY CONNECTION
FOR USE WITH @@@@@352-2380@@@@@, PUMP GP-FUEL (REAR MOUNT), WIRING GP-PUMP
CANNOT BE USED WITH FRONT HOUSING SOUND PANELING
AN ATTACHMENT
i04401791 SEBP7399
3548053 LINES GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 300-6714 [8] MOUNT  
2. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
3. 213-4740 Y [1] PUMP GP-FUEL PRM & WATER SEP  
4. 232-1374 [1] BRACKET  
5. 232-1376 [2] SPACER (8.5X12.7X139.1-MM THK)  
6. 284-8381 Y [1] SWITCH AS-TOGGLE (FUEL FILTER)  
7. 350-1201 [1] LINE-FUEL  
8. 353-4765 [1] BRACKET AS  
9. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
10. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
11. 122-0450 [1] GROMMET  
12. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
13. 238-5080 [1] SEAL-O-RING  
14. 238-5081 [1] SEAL-O-RING  
15. 2P-7636 [1] CONNECTOR (3/4-16 STR-THD)  
16. 309-5131 [3] PLUG AS  
    (EACH INCLUDES)
  9S-8006 [1] PLUG (7/8-14-THD)  
  238-5081 [1] SEAL-O-RING  
17. 4F-3508 [2] BOLT (5/16-18X6.5-IN)  
18. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 8T-1897 [1] CLIP (SLOT)  
20. 8T-1898 [1] CLIP (TAB)  
21. 9M-4584 [1] CONNECTOR  
22. 9N-0869 [6] WASHER-HARD (8.8X25.5X2-MM THK)  
23. 7X-7702 E CONDUIT-FLEXIBLE (23.35-MM ID, SPLIT)(21-CM)  
23A. 7X-7702 E CONDUIT-FLEXIBLE (23.35-MM ID, SPLIT)(29-CM)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP73990134
 

352-2380: MOUNTING GP-FUEL FILTER

352-2380 MOUNTING GP-FUEL FILTER
PROVIDES MOUNTING LOCATIONS FOR BOTH 2 BOLT MANUAL PRIMING FILTER AND 3 BOLT ELECTRIC PRIMING PRIMARY FILTER, PROVIDES PRIMARY LOCATIONS FOR WIRING HARNESS
AN ATTACHMENT
i04037581 SEBP7399
3522380 MOUNTING GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-2379 [1] BRACKET  
2. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
3. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
4. 4P-0983 [1] STUD (3/8-16-THD)  
5. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 8S-9191 [1] BOLT (3/8-16X4-IN)  
7. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#SEBP73990135
 

352-3726: MOUNTING GP-FUEL FILTER

352-3726 MOUNTING GP-FUEL FILTER
PROVIDES LEFT, MIDDLE, LOW SECONDARY FUEL FILTER MTG
Type 1
FOR USE WITH @@@@@342-0612@@@@@
AN ATTACHMENT
i03853731 SEBP7399
3523726 MOUNTING GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-3725 [1] BRACKET AS-FUEL FILTER  
  332-9270 [1] BUSHING  
2. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
3. 1C-2251 [1] BOLT (3/8-16X1.87-IN)  
4. 5B-0841 [1] BOLT (5/8-18X1.75-IN)  
5. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP73990136
 

352-3726: MOUNTING GP-FUEL FILTER

352-3726 MOUNTING GP-FUEL FILTER
PROVIDES LEFT, MIDDLE, LOW SECONDARY FUEL FILTER MTG
Type 2
FOR USE WITH @@@@@342-0612@@@@@
AN ATTACHMENT
i06216938 SEBP7399
3523726 MOUNTING GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 454-5527 C [1] BRACKET AS  
1A. 1D-4541 [5] BOLT (5/16-18X3-IN)  
1B. 5S-0003 [5] NUT (5/16-18-THD)  
1C. 9N-0869 [10] WASHER-HARD (8.8X25.5X2-MM THK)  
1D. 300-6714 [10] MOUNT  
2. 3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
3. 5B-0841 [1] BOLT (5/8-18X1.75-IN)  
4. 5M-2894 C [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP73990137
 

344-3592: PUMP & MTG GP-FUEL TRANSFER

344-3592 PUMP & MTG GP-FUEL TRANSFER
AN ATTACHMENT
i03821273 SEBP7399
3443592 PUMP & MTG GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-9116 [1] COVER  
2. 388-7287 [1] PUMP GP-FUEL TRANSFER  
3. 0S-0699 [2] STUD  
4. 107-5769 [2] SEAL-O-RING  
5. 1T-0765 [2] BOLT (3/8-16X1-IN)  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP73990138
 

366-2077: PUMP GP-FUEL INJECTION

366-2077 PUMP GP-FUEL INJECTION
i04402347 SEBP7399
3662077 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-5072 [1] SPACER (9.8X15.85X37.6-MM THK)  
2. 261-0670 [1] CLAMP  
3. 359-4070 Y [1] INJECTOR GP-FUEL  
4. 8S-9191 [1] BOLT (3/8-16X4-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP73990139
 

247-6050: PUMP GP-FUEL PRIMING

247-6050 PUMP GP-FUEL PRIMING
PART OF 213-4740 PUMP GP-FUEL PRM & WATER SEP
AN ATTACHMENT
i03027417 SEBP7399
2476050 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 436-8983 [2] VALVE-CHECK  
2. 162-2222 [2] SPRING  
3. 173-1016 [2] RING-BACKUP  
4. 179-7400 [2] SEAL  
5. 188-7536 [1] SEAL  
6. 188-7541 [1] SEAL  
7. 236-6717 [2] SEAL-O-RING  
8. 6D-5801 [2] LOCKNUT (8-32-THD)  
9. 447-7206 [1] SEAL-O-RING  
10. 8T-4138 M [3] BOLT (M6X1X20-MM)  
11. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
12. 9S-8002 [1] PLUG (7/16-20-THD)  
13. 9X-8267 [3] WASHER (6.6X12X2-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog C18 :

FITTING GP-FUEL LINES
353-1661 FITTING GP-FUEL LINES
FILTER GP-WATER SEP & FUEL
212-9580 FILTER GP-WATER SEP & FUEL
FILTER GP-FUEL
342-0612 FILTER GP-FUEL
FILTER GP-FUEL
342-0612 FILTER GP-FUEL
FASTENER GP-FUEL LINES
353-2831 FASTENER GP-FUEL LINES
BASE GP-FUEL FILTER
343-8126 BASE GP-FUEL FILTER
VALVE GP-EXHAUST GAS (NRS)
337-7323 VALVE GP-EXHAUST GAS (NRS)
VALVE & MOUNTING GP (NRS)
347-9433 VALVE & MOUNTING GP (NRS)
LINES GP-FUEL
350-5230 LINES GP-FUEL
LINES GP-FUEL
350-5230 LINES GP-FUEL
LINES GP-FUEL PRIMING
354-8053 LINES GP-FUEL PRIMING
MOUNTING GP-FUEL FILTER
352-2380 MOUNTING GP-FUEL FILTER
MOUNTING GP-FUEL FILTER
352-3726 MOUNTING GP-FUEL FILTER
MOUNTING GP-FUEL FILTER
352-3726 MOUNTING GP-FUEL FILTER
PUMP & MTG GP-FUEL TRANSFER
344-3592 PUMP & MTG GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
366-2077 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar C18, Construction
89,000 USD 
Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C18, Construction
34,700 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
34,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
32,850 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
36,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.