551-3880 CYLINDER HEAD GP PART OF 389-1346 CYLINDER HEAD GP 966F II WHEEL LOADER

BASIC ENGINE

CYLINDER HEAD GP

0. 551-3880 CYLINDER H

PAN GP-OIL

1. 332-0103 DRAIN GP-E

DRIVE GP-FAN

2. 327-0676 DRIVE GP-F

DAMPER GP

3. 321-7297 FASTENER G

FLYWHEEL GP

4. 321-7326 FLYWHEEL G

HOUSING GP-FLYWHEEL

5. 363-5082 HOUSING GP

GEAR GP

6. 349-8575 HOUSING GP

CYLINDER BLOCK GP

7. 328-7401 JET GP-PIS

ENGINE ARRANGEMENT

CONVERSION GP-ENGINE

8. 457-4446 KIT-ENGINE
9. 457-4449 KIT-ENGINE
0. INFORMATION

WHEEL LOADER 966F II WHEEL LOADER 1SL
C7.1 Engine Emissions Retrofit Repower Tier IV for 966F & 966F Series II Wheel Loader 1SL00001-UP (MACHINE) SEBP7402 966F II 1SL (1992)

BASIC ENGINE

CYLINDER HEAD GP

389-0955 CYLINDER HEAD AS

389-1346 CYLINDER HEAD GP

551-3880 CYLINDER HEAD GP

#SEBP74020020

551-3880: CYLINDER HEAD GP

CYLINDER HEAD GP

551-3880 CYLINDER HEAD GP
PART OF 389-1346 CYLINDER HEAD GP

i07414810 SEBP7402

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	322-4120	[12]	INSERT-VALVE SEAT (INLET)
2.	356-9640	[24]	GUIDE-VALVE
3.	276-8117	[6]	PLUG-CORE
4.	188-5102	[13]	PLUG
5.	298-4528	[1]	PLUG-CORE
6.	331-7807	[3]	PLUG
7.	343-5964	[12]	INSERT-VALVE SEAT (EXHAUST)

#SEBP74020021

332-0103: DRAIN GP-ENGINE OIL

DRAIN GP-ENGINE OIL

332-0103 DRAIN GP-ENGINE OIL
PART OF 481-5676 ENGINE AR-CORE

i04453752 SEBP7402

3320103 DRAIN GP-ENGINE OIL Parts scheme

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	3K-0360	[1]	SEAL-O-RING
2.	6V-7238	[1]	VALVE-SHUTOFF

#SEBP74020022

327-0676: DRIVE GP-FAN

DRIVE GP-FAN

327-0676 DRIVE GP-FAN -ENGINE
PART OF 481-5676 ENGINE AR-CORE

i04364809 SEBP7402

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	377-9255	[1]	PULLEY AS (8-GROOVE)
2.	336-1294	[1]	BRACKET
3.	6I-0593 M	[2]	BOLT (M10X1.5X30-MM)
4.	350-8742	[1]	BELT-SERPENTINE
	M		METRIC PART

#SEBP74020023

321-7297: FASTENER GP-DAMPER

FASTENER GP-DAMPER

321-7297 FASTENER GP-DAMPER -CRANKSHAFT
NO AUX PULLEY
PART OF 481-5676 ENGINE AR-CORE

i04188903 SEBP7402

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	274-1935 M	[6]	BOLT (M12X1.75X30-MM)
	M		METRIC PART

#SEBP74020024

321-7326: FLYWHEEL GP

FLYWHEEL GP

321-7326 FLYWHEEL GP
PART OF 481-5676 ENGINE AR-CORE

i04454108 SEBP7402

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	145-4911	[12]	WASHER
2.	277-0587	[1]	FLYWHEEL AS
	277-0588	[1]	GEAR-STARTING MOTOR RING (134-TEETH)
3.	0S-1603	[12]	BOLT (1/2-20X1.5-IN)

#SEBP74020025

363-5082: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

363-5082 HOUSING GP-FLYWHEEL
SAE 2 WET BACK END
PART OF 481-5676 ENGINE AR-CORE

i04454289 SEBP7402

3635082 HOUSING GP-FLYWHEEL Parts scheme

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	277-0116	[1]	SEAL-CRANKSHAFT (REAR)
2.	277-0118	[1]	SEAL
3.	354-8322	[2]	PLUG
4.	515-3047	[4]	BOLT-HEAD (M12X1.75X55-MM)
5.	287-8597	[2]	DOWEL
6.	283-8301 M	[4]	BOLT (M16X2X60-MM)
7.	288-6974	[4]	BOLT
8.	375-7531	[1]	GASKET
9.	373-2103	[1]	HOUSING-FLYWHEEL
10.	1W-6735	[1]	COVER-FLYWHEEL HOUSING
11.	7E-7606 M	[4]	BOLT (M10X1.5X16-MM)
12.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART

#SEBP74020026

349-8575: HOUSING GP-FRONT

HOUSING GP-FRONT

349-8575 HOUSING GP-FRONT
LEFT HAND SIDE, PTO
PART OF 481-5676 ENGINE AR-CORE

i04210791 SEBP7402

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-1011	[1]	WASHER
2.	067-6179	[1]	DOWEL
3.	319-9361	[1]	GASKET
4.	325-4374	[1]	PLATE-THRUST
5.	371-8057	[1]	COVER-FRONT
6.	371-8062	[1]	SEAL
7.	335-5330	[1]	GASKET
8.	340-0571	[1]	GEAR (72-TEETH)
9.	342-1306	[1]	IDLER AS (97-TEETH)
10.	419-0423	[1]	HUB-IDLER GEAR
11.	502-3519	[1]	CASE-GEAR
12.	232-3666	[1]	WASHER-THRUST
13.	100-3751 M	[6]	BOLT (M8X1.25X65-MM)
14.	101-3895 M	[2]	BOLT (M8X1.25X35-MM)
15.	6I-0217 M	[17]	BOLT (M8X1.25X20-MM)
16.	6I-0645 M	[3]	BOLT (M8X1.25X25-MM)
17.	6I-0789 M	[3]	BOLT (M10X1.5X60-MM)
18.	7C-4616 M	[1]	BOLT (M12X1.75X45-MM)
	M		METRIC PART

#SEBP74020027

328-7401: JET GP-PISTON COOLING

JET GP-PISTON COOLING

328-7401 JET GP-PISTON COOLING
PART OF 481-5676 ENGINE AR-CORE

i04176214 SEBP7402

3287401 JET GP-PISTON COOLING Parts scheme

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-4841 M	[6]	BOLT (M6X1X10-MM)
2.	329-3796	[6]	TUBE AS-OIL JET
	M		METRIC PART

#SEBP74020028

457-4446: KIT-ENGINE CONVERSION

KIT-ENGINE CONVERSION

457-4446 KIT-ENGINE CONVERSION -REPOWER
S/N 4YG1-99999; 1SL1-174
PROVIDES A BREAKDOWN OF THE SERVICEABLE PARTS REQUIRED FOR THE REPOWER. EXCLUDING THE ENGINE AND OPTIONAL GROUPS
PART OF 455-1837 CONVERSION AR-MACHINE

i05754761 SEBP7402

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-4278	[3]	CLAMP-HOSE
2S-3440	[2]	CLAMP-HOSE
3J-7354	[2]	SEAL-O-RING
3K-0360	[3]	SEAL-O-RING
3P-9847	[1]	CLIP
4E-1384	[2]	BUMPER-CONICAL
5D-1026	[5]	CLAMP-BAND
5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
423-1982 E		HOSE (76-CM)
5P-8309 J		SEAL (50-DM)
5V-8780	[1]	KNOB
6S-8620	[2]	CLAMP-HOSE
6V-0405	[1]	SEAL-BONDED
6V-1355	[1]	ELBOW
6V-3250	[1]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
6V-7238	[1]	VALVE-SHUTOFF
6V-9027	[2]	SEAL-O-RING
7D-7233	[2]	CLIP
7X-0474 M	[4]	BOLT (M10X1.5X220-MM)
7X-0515	[9]	WASHER-HARD (17X35X5-MM THK)
7X-0579	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
7X-1443	[10]	PROTECTOR
7X-7729	[96]	WASHER (11X25X3-MM THK)
8T-0119	[1]	ELBOW
8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
8T-4132 M	[1]	NUT (M16X2-THD)
8T-4136 M	[16]	BOLT (M10X1.5X25-MM)
8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
8T-4138 M	[11]	BOLT (M6X1X20-MM)
8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
8T-4195 M	[79]	BOLT (M10X1.5X30-MM)
8T-4196 M	[10]	BOLT (M10X1.5X35-MM)
8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4226	[21]	WASHER-PLATED (10.5X45X3-MM THK)
8T-4779 M	[1]	BOLT (M16X2X35-MM)
8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
8T-7338 M	[8]	BOLT (M16X2X45-MM)
8T-7524	[1]	SEAL-O-RING
8T-7547 M	[4]	BOLT (M8X1.25X30-MM)
8T-7863	[1]	CONNECTOR
8T-7909	[1]	ADAPTER
8T-7934	[6]	WASHER-HARD (11X21X5-MM THK)
8T-8919	[4]	BOLT (1/2-13X1.75-IN)
9M-8406	[2]	CLIP (LOOP)
7M-8485	[1]	SEAL-O-RING
034-4202	[1]	ELBOW
9X-8256	[15]	WASHER (6.6X12X2-MM THK)
033-8248	[2]	CLIP
112-5344	[1]	LATCH AS-DOOR
127-9323	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
459-0653	[1]	ADAPTER
149-8142	[1]	CONNECTOR
154-9023	[1]	VALVE-SAMPLING
157-0670	[1]	CAP-DUST
168-2067	[2]	MOUNT AS
179-9348	[1]	VALVE-DRAIN
198-4777	[4]	WASHER-HARD (11X25X10-MM THK)
200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
204-2281	[2]	STRAP-CABLE
209-4573	[8]	CLAMP-T BOLT
209-5528	[1]	STRIKER
211-8071	[5]	CAP-PROTECTIVE
211-8073	[6]	CAP-PROTECTION
216-4983	[2]	CLAMP-T BOLT
226-0291	[1]	LOCK AS
226-0321	[1]	CAM
235-9822	[1]	CONE
242-6099	[1]	CLIP
243-2289	[2]	MOUNT AS
243-3416	[1]	ADAPTER
246-0511	[1]	SPACER (50.3X127X8-MM THK)
246-0616	[1]	SPIDER AS-FAN (8-BLADE)
246-6152 Y	[1]	MOTOR GP-GEAR
277-8628	[2]	MOUNT
278-2656	[1]	DEFLECTOR
297-1546	[1]	CLIP
301-3004	[1]	FILM-INSTRUCTION (MAXIMUM COOLANT LEVEL)
301-3005	[1]	FILM-INSTRUCTION (MINIMUM COOLANT LEVEL)
310-5893	[1]	CONNECTOR
315-6643	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
316-2616	[1]	HINGE AS
8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
321-8444	[1]	BRACKET
322-0907	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
322-0909	[1]	SUPPORT AS
4E-0019	[1]	BOSS (M10X1.5-THD)
6V-9632 M	[4]	NUT-WELD (M6X1-THD)
8T-3490 M	[5]	NUT-WELD (M10X1.5-THD)
9R-2613 M	[1]	BOSS-WELD (M10X1.5X25-MM)
322-0911	[1]	SUPPORT AS
4E-0019	[2]	BOSS (M10X1.5-THD)
6V-9632 M	[4]	NUT-WELD (M6X1-THD)
8T-3490 M	[8]	NUT-WELD (M10X1.5-THD)
9R-2613 M	[1]	BOSS-WELD (M10X1.5X25-MM)
322-0913	[1]	SUPPORT AS
8T-3490 M	[15]	NUT-WELD (M10X1.5-THD)
322-0916	[1]	SUPPORT AS
8T-3490 M	[13]	NUT-WELD (M10X1.5-THD)
322-0918	[1]	SUPPORT AS-MOTOR
8T-3490 M	[12]	NUT-WELD (M10X1.5-THD)
8T-3597 M	[10]	NUT-WELD (M12X1.75-THD)
9R-2613 M	[2]	BOSS-WELD (M10X1.5X25-MM)
322-0920	[1]	SHROUD AS
322-0925	[1]	PLATE
322-0950	[1]	TUBE AS
322-0952	[1]	HOSE
322-0953	[1]	BRACKET AS
8T-3490 M	[9]	NUT-WELD (M10X1.5-THD)
322-0955	[1]	HOSE
322-0959	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
322-0961	[1]	BRACKET
322-0963	[1]	BAFFLE AS
6B-4594	[7]	RIVET
322-0965	[2]	HOSE
322-0981	[1]	BAFFLE AS
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
322-0983	[1]	BAFFLE AS
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
322-0989	[1]	BRACKET AS
8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
322-0995	[1]	ANGLE
326-3579	[2]	COVER AS
		(EACH INCLUDES)
194-5278	[2]	HINGE
329-8587	[1]	CORE AS-CONDENSER
331-8065	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
334-3325	[1]	CORE AS-FUEL COOLER
486-0884 Y	[1]	TANK GP-COOLANT
337-8788	[1]	ELBOW
339-5128	[1]	COOLER AS-TRANSMISSION OIL
7J-5544	[1]	FITTING (3/4X16-THD)
339-5132	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
339-9852	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
344-5673 M	[4]	NUT (M6X1-THD)
344-5674 M	[2]	NUT (M8X1.25-THD)
344-5675 M	[13]	NUT (M10X1.5-THD)
345-8264	[2]	BRACKET AS
		(EACH INCLUDES)
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
345-8266	[2]	BRACKET AS
		(EACH INCLUDES)
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
349-5934	[1]	CORE AS-HYDRAULIC OIL COOLER
351-0798	[1]	GUARD AS-FAN
469-0653	[1]	BRACKET
358-2477	[2]	PLATE AS
		(EACH INCLUDES)
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
364-4167	[1]	CORE AS-AFTERCOOLER
364-9871	[1]	TUBE AS
364-9875	[1]	HOSE
364-9899	[1]	BAFFLE AS
6V-9632 M	[3]	NUT-WELD (M6X1-THD)
417-5125	[1]	CORE AS-RADIATOR
7M-8485	[1]	SEAL-O-RING
034-4202	[1]	ELBOW

		(ABOVE PARTS ARE PART OF COOLING SYSTEM CONVERSION GROUP 455-1842)

2S-6024	[2]	FUSE (5-AMPERE)
2V-7087	[3]	LENS-AMBER
2V-7088	[2]	LENS-RED
3E-2035	[1]	SWITCH AS-PRESSURE
7N-7779	[1]	SOCKET-CONNECTOR (14-GA TO 18-GA)
7N-7780	[1]	PIN-CONNECTOR (14-GA TO 18-GA)
7N-9738	[1]	HOUSING-RECEPTACLE (14-GA TO 18-GA)
3E-5239	[2]	RELAY AS (24-VOLT)
3E-5370	[1]	SENSOR GP-TEMPERATURE
8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
9X-1813 E		SLEEVE (34-CM)
3J-1907	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
3K-8782	[1]	FUSE (10-AMPERE)
4K-5122	[3]	HOLDER AS-FUSE
		(EACH INCLUDES)
6T-8115	[1]	NUT (1/2-24-THD)
139-0178	[1]	CAP
5P-5528	[1]	BUSHING-REDUCER
6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)
6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
9B-7233	[2]	LOCKWASHER
6V-1722	[1]	ADAPTER
6V-5048	[1]	SEAL-O-RING
6V-9028	[1]	SEAL-O-RING
8T-7524	[2]	SEAL-O-RING
8T-7860	[1]	BUSHING-REDUCER
8T-7863	[1]	CONNECTOR
9X-3271	[1]	ADAPTER (1/2-14-THD)
9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
3E-4367	[1]	RING-RETAINING
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
100-3245	[5]	LAMP (24-VOLT, 0.17-AMPERE)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
176-9299	[1]	KIT-RECEPTACLE (3-PIN)
		(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
112-9611	[14]	TERMINAL-BLADE (18-GA TO 20-GA)
139-4724	[1]	CIRCUIT BREAKER AS (30-AMPERE)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
156-0518	[5]	SOCKET AS
		(EACH INCLUDES)
6V-8367	[1]	LOCKWASHER
6V-8382	[1]	NUT-HEX (11/16-27-THD)
168-8806	[1]	CONNECTOR
171-2205	[1]	CIRCUIT BREAKER AS (40-AMPERE)
1H-3244	[2]	LOCKWASHER
4E-5724	[2]	WASHER (7X12X1-MM THK)
8T-0122	[2]	NUT-FULL (1/4-28-THD)
174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
180-9900	[1]	CAP AS
5P-7958	[1]	SLEEVE-CABLE SPLICE
8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
179-9392	[1]	LANYARD
203-9007	[1]	NUT (1-1/2-18-THD)
217-9039	[12]	STRAP-CABLE
221-3408	[1]	SENSOR GP-PRESSURE
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(KIT INCLUDES PLUG AS, WEDGE NAD INTERFACE SEAL)
230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
		(EACH INCLUDES)
455-0704	[1]	SEAL-CONNECTOR
230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
455-0705	[1]	SEAL-CONNECTOR
231-4502	[1]	GUARD
238-5080	[1]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
239-1134 Y	[1]	VALVE GP-ETHER STARTING (24-VOLT)
241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)
245-7434	[1]	KIT-CONNECTING PLUG (10-PIN)
255-2752 Y	[1]	SWITCH GP-START (IGNITION)
256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)
256-6454	[1]	SENSOR-TEMPERATURE (2-PIN)(ATMOSPHERIC AIR)
262-4806 Y	[1]	SENSOR GP-SPEED (ENGINE OUTPUT)
265-4123	[1]	RECEPTACLE AS-CONNECTOR (9-PIN)
270-2679	[1]	LOCKWASHER
290-1993	[2]	STRAP-CABLE
301-2981	[1]	SWITCH AS-TOGGLE
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
112-4550 E		SLEEVE (19-CM)
327-6999	[1]	SWITCH AS-ROCKER (DPF REGENERATION)
331-6215	[1]	GROMMET
332-1064	[1]	PLUG-ILLUMINATED
332-7333	[1]	INDICATOR GP-AIR FILTER CHANGE
205-1627	[1]	BRACKET
349-0951	[10]	CLIP
350-8529 Y	[1]	HARNESS AS-CHASSIS (COOLANT OVERFLOW)
359-1431 Y	[1]	DISPLAY GP-MONITOR
361-7094 Y	[1]	HARNESS AS-POWER
364-0613 Y	[1]	HARNESS AS-ENGINE
488-5391	[1]	PEDAL GP-GOVERNOR (THROTTLE)

		(ABOVE PARTS ARE PART OF ELECTRICAL CONVERSION GROUP 455-1840)

5K-9090	[2]	SEAL-O-RING
6V-8726	[2]	CONNECTOR
6V-9008	[2]	ELBOW
7M-8485	[2]	SEAL-O-RING
124-2123	[4]	COUPLING-ORFS

		(ABOVE PARTS ARE PART OF POWER TRAIN CONVERSION GROUP 455-1841)

1P-4278	[4]	CLAMP-HOSE
1S-0994	[1]	CLIP (LOOP)
3E-4883	[2]	SLEEVE
3S-2093	[2]	STRAP-CABLE
4D-7733	[3]	CLIP (LOOP)
4D-9517	[2]	CLIP
5D-1026	[1]	CLAMP-BAND
165-0016 G		HOSE (44-CM)
5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
5P-4325	[1]	CLIP
5P-4961	[5]	CLAMP-HOSE
5P-9299	[3]	CLIP (LOOP)
5T-6374	[1]	SPACER (10.5X20X40-MM THK)
6V-1889	[1]	CLIP (LOOP)
6V-8245	[3]	ELBOW
6V-8634	[1]	CONNECTOR
6V-8724	[1]	ELBOW
6V-9027	[4]	SEAL-O-RING
6V-9028	[1]	SEAL-O-RING
6V-9200	[1]	ELBOW
6V-9850	[1]	ELBOW
6V-9872	[2]	CONNECTOR
7K-1181	[3]	STRAP-CABLE
7X-0579	[6]	WASHER-HARD (8.8X25.5X2-MM THK)
7X-1463	[6]	COUPLING-STRAIGHT
7X-2622	[2]	WASHER (22X115X10-MM THK)
8C-8478 M	[2]	BOLT (M20X2.5X140-MM)
8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
8T-4123	[4]	WASHER (3.62X5.75X0.375-MM THK)
8T-4131 M	[2]	NUT (M20X2.5-THD)
8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
8T-4137 M	[12]	BOLT (M10X1.5X20-MM)
8T-4174 M	[4]	BOLT (M16X2X120-MM)
8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
8T-4198 M	[2]	BOLT (M10X1.5X100-MM)
8T-4223	[56]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-5439	[4]	WASHER-HARD (21.5X45X6-MM THK)
8T-6381 M	[2]	BOLT (M20X2.5X120-MM)
8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
8T-6725	[1]	CONNECTOR
8T-6869 M	[3]	BOLT (M8X1.25X60-MM)
8T-7860	[1]	BUSHING-REDUCER
8T-8919	[28]	BOLT (1/2-13X1.75-IN)
8T-9655	[6]	MOUNT-ISOLATION
8X-0674	[2]	WASHER (22X100X10-MM THK)
9M-8406	[8]	CLIP (LOOP)
9S-4185	[2]	PLUG (3/4-16-THD)
9W-9930	[2]	MOUNT AS
9X-2134	[2]	ELBOW
9X-3887	[1]	COUPLING
9X-3893	[2]	COUPLING
9X-3899	[1]	COUPLING
9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
124-3019	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
130-5300	[1]	CLIP
137-4499	[2]	CLAMP AS
		(EACH INCLUDES)
6V-8801	[1]	NUT (3/8-16-THD)
8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
177-0581	[2]	HOSE
191-1782	[3]	SPACER (8.5X12.7X38.2-MM THK)
198-4777	[1]	WASHER-HARD (11X25X10-MM THK)
209-4578	[8]	CLAMP-T BOLT
211-8071	[4]	CAP-PROTECTIVE
211-8073	[6]	CAP-PROTECTION
212-6934	[1]	CLAMP-T BOLT
214-7566	[3]	SEAL-O-RING
214-7568	[2]	SEAL-O-RING
216-4983	[3]	CLAMP-T BOLT
218-1755	[1]	ELBOW
220-1241	[2]	MOUNT AS
221-5252	[4]	CLAMP-HOSE
227-5714	[1]	ELBOW
228-7089	[12]	SEAL-O-RING
228-7100	[1]	SEAL-O-RING
228-7102	[3]	SEAL-O-RING
238-5080	[4]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING
263-2525	[1]	ELBOW-TUBE
291-2275	[1]	BRACKET AS
2W-7940	[1]	BRACKET
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
297-7964	[1]	CONNECTOR
310-5893	[1]	CONNECTOR
320-8855	[1]	TUBE
323-6157	[2]	COUPLING AS-PERMANENT
323-6164	[2]	COUPLING AS-PERMANENT
323-6168	[1]	COUPLING AS-PERMANENT
325-5868	[2]	HOSE-ELBOW
343-4380	[1]	HOSE
346-3575	[2]	HOSE-AIR
349-6970	[1]	FILM-INFORMATION (FUEL, READ OMM)
349-8603	[1]	FILM-INSTRUCTION (FUEL, READ OMM)
354-0865	[1]	HOSE
355-0633	[1]	COUPLER-QUICK DISCONNECT
361-5097 Y	[1]	PUMP GP-FUEL (24-VOLT, ARD)
362-1304	[1]	TUBE
363-4357	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
371-7205	[1]	ADAPTER-ELBOW
525-6205	[1]	FILTER AS-FUEL (IN-LINE)
446-5409	[1]	PUMP AS-FUEL TRANSFER (24-VOLT)
6C-3241	[8]	BOLT (1/2-13X1.5-IN)

		(ABOVE PARTS ARE PART OF ENGINE INSTALLATION GROUP 455-1839)

0S-1619	[4]	BOLT (3/8-16X3-IN)
1F-7567	[1]	CLIP
1S-0994	[1]	CLIP (LOOP)
1S-1015	[1]	CLIP
2K-4821	[1]	LOCKNUT (5/8-18-THD)
2S-4078	[1]	SEAL-O-RING
3B-4607	[3]	PIN-COTTER
3B-4640	[1]	PIN-COTTER
3D-2824	[9]	SEAL-O-RING
3J-1907	[24]	SEAL-O-RING
3J-7354	[6]	SEAL-O-RING
3K-0360	[10]	SEAL-O-RING
3S-4082	[2]	PIN
3V-0778	[1]	BRACKET
4D-7794	[1]	CLIP
4J-5477	[2]	SEAL-O-RING
4L-6454	[1]	BOLT (3/8-16X1-IN)
4V-0939	[1]	BOLT (5/16-18X1.73-IN)
4V-0968	[2]	LOCK
5C-2874 M	[1]	NUT (M5X0.8-THD)
5K-8451	[3]	CLIP
5M-3062	[2]	BOLT (3/8-16X0.75-IN)
165-0016 G		HOSE (43-IN)
5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
5P-6724	[1]	BEARING-ROLLER
5P-9297	[1]	CLIP
5P-9617	[1]	ADAPTER
5P-9297	[1]	CLIP
6D-4244	[20]	CLIP
6D-8305	[2]	CLAMP
6E-4719	[1]	KIT-CARTRIDGE
6V-0852	[5]	CAP-DUST
6V-1889	[3]	CLIP (LOOP)
6V-3965	[5]	FITTING (QUICK DISCONNECT)
6V-8397	[40]	SEAL-O-RING
6V-8398	[10]	SEAL-O-RING
6V-8400	[1]	SEAL-O-RING
6V-8556	[1]	NUT (1-3/16-12-THD)
6V-8634	[1]	CONNECTOR
6V-8636	[3]	CONNECTOR
6V-8637	[1]	CONNECTOR
6V-8713	[1]	CONNECTOR
6V-8723	[1]	ELBOW
6V-8724	[6]	ELBOW
6V-8781	[4]	TEE
6V-8782	[1]	TEE
6V-8788	[1]	TEE
6V-8801	[6]	NUT (3/8-16-THD)
6V-8942	[1]	REDUCER-O-RING
6V-8943	[1]	REDUCER
6V-8982	[1]	ELBOW
6V-8989	[1]	ELBOW
6V-9004	[1]	ELBOW
6V-9161	[1]	TEE
6V-9169	[1]	NUT (13/16-16-THD)
6V-9170	[2]	NUT-BULKHEAD (1-14-THD)
6V-9200	[3]	ELBOW
6V-9510	[1]	PLUG
6V-9746	[12]	SEAL-O-RING
6V-9845	[1]	TEE-SWIVEL
6V-9846	[2]	TEE
6V-9850	[2]	ELBOW
6V-9851	[1]	ELBOW
6V-9853	[1]	ELBOW
6V-9872	[1]	CONNECTOR
6V-9873	[1]	CONNECTOR
6V-9874	[1]	CONNECTOR (STRAIGHT)
6V-9876	[1]	ELBOW
7I-4078	[1]	LEVER AS
7J-9108	[16]	SEAL-O-RING
7K-1181	[1]	STRAP-CABLE
7V-6571	[4]	GROMMET
7V-6659	[4]	CLAMP-DOUBLE
7X-0440	[1]	BOLT (5/16-18X1.75-IN)
7X-0592	[6]	WASHER-HARD (10.2X32X5-MM THK)
7X-0872	[2]	TEE-SWIVEL
7X-2459	[2]	ADAPTER-TEE
7X-2534 M	[2]	BOLT (M6X1X50-MM)
7X-2553 M	[2]	BOLT (M16X2X40-MM)
7X-2618	[3]	PIN
7X-7729	[4]	WASHER (11X25X3-MM THK)
8C-3309	[1]	TEE
8C-3446	[1]	VALVE-SAMPLING
8C-3451	[1]	CAP-DUST (HYDRAULIC OIL)
8C-6758	[1]	CONNECTOR
8C-8417	[1]	CONNECTOR
8C-8988	[3]	ELBOW
8M-2773	[10]	CLIP (LOOP)
8S-0948	[1]	CLIP
8T-0404	[2]	ELBOW
8T-0741	[2]	SEAL-LIP TYPE
8T-1718	[2]	ELBOW
8T-3611	[1]	CONNECTOR
8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
8T-4896	[9]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
8T-5050	[1]	CONNECTOR
8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
8T-6876	[1]	ELBOW
8T-7521	[1]	ELBOW
8T-7547 M	[8]	BOLT (M8X1.25X30-MM)
8T-8917	[3]	BOLT (1/2-13X1.25-IN)
9S-4185	[1]	PLUG (3/4-16-THD)
9U-0773	[1]	SHAFT
9U-0830	[1]	END-YOKE ROD
9U-3346 Y	[1]	VALVE GP-PRESSURE REDUCING
9X-2538	[2]	ELBOW
9X-8256	[2]	WASHER (6.6X12X2-MM THK)
9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
067-2551	[5]	CLIP
090-8416	[2]	CLAMP
091-1745	[6]	WASHER (16.6X24X1.2-MM THK)
104-8617	[1]	SHAFT AS
105-7704	[1]	TEE
106-0430	[1]	MANIFOLD
106-1774 Y	[1]	VALVE GP-BRAKE CONTROL (PARKING)
108-2832	[1]	TUBE AS
108-5194	[1]	TUBE AS
108-5195	[1]	TUBE AS
108-5196	[1]	TUBE AS
108-5201	[1]	TUBE AS
108-5202	[1]	TUBE AS
108-5203	[1]	TUBE AS
108-5207 I	[1]	HOSE AS
108-8100	[1]	CABLE AS-PARKING BRAKE CONTROL
109-1668	[1]	TUBE AS
110-6349	[1]	FITTING AS (QUICK DISCONNECT)
121-6633	[1]	TUBE AS
122-6869 G		HOSE-HYDRAULIC (187-IN)
122-6870 G		HOSE-HYDRAULIC (96-IN)
122-6872 G		HOSE-HYDRAULIC (69-IN)
122-6906 G		HOSE-HYDRAULIC (73-IN)
124-1212	[1]	FITTING
124-2114	[7]	COUPLING
124-2116	[1]	COUPLING-PERMANENT
124-2117	[2]	COUPLING
124-2119	[10]	COUPLING-PERMANENT
124-2120	[1]	COUPLING-PERMANENT
124-2121	[1]	COUPLING-PERMANENT
124-2124	[2]	COUPLING-PERMANENT
124-2131	[1]	COUPLING-PERMANENT
124-2131	[1]	COUPLING-PERMANENT
124-2132	[1]	COUPLING-PERMANENT
124-2143	[1]	COUPLING-PERMANENT
124-2144	[2]	COUPLING AS-PERMANENT
124-2147	[1]	COUPLING
124-2151	[2]	COUPLING-PERMANENT
124-2153	[1]	COUPLING
138-4814	[1]	TUBE AS
147-3712	[1]	ROD-CONTROL
147-3714	[1]	TUBE AS
149-1907 Y	[1]	CONTROL GP-FOOT BRAKE
149-1910	[1]	BASE AS
8S-7803	[4]	RING-RETAINING
150-7693	[1]	BRACKET AS
154-8041	[1]	ACTUATOR AS-PARKING BRAKE
156-9791	[2]	CONNECTOR-SPECIAL
175-0447	[1]	VALVE AS-CHECK
3D-2824	[1]	SEAL-O-RING
6V-9746	[1]	SEAL-O-RING
191-8735 Y	[1]	VALVE GP-DEMAND FAN
194-2554	[1]	TEE
209-0499	[1]	END-YOKE ROD
214-7568	[2]	SEAL-O-RING
244-1426 Y	[1]	VALVE GP-CHECK
248-6816	[3]	MOUNT
423-1974 E		HOSE (254-CM)
289-9972	[1]	VALVE GP-ACCUMULATOR CHARGING
291-6531	[1]	GASKET
295-6259 Y	[1]	FILTER GP-OIL
323-6157	[1]	COUPLING AS-PERMANENT
323-6162	[1]	COUPLING AS-PERMANENT
329-3356 M	[2]	NUT (M12X1.75-THD)
341-0107	[2]	ELBOW
344-5675 M	[6]	NUT (M10X1.5-THD)
355-3995	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
358-2446	[1]	BRACKET
364-8026	[1]	PLATE AS
8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
365-3173 Y	[2]	ACCUMULATOR GP-HYDRAULIC (UNCHARGED)
372-5336 I	[1]	HOSE AS
397-9301	[2]	WASHER-HARD (11.5X20X15-MM THK)
419-4941	[1]	GEAR-IDLER (36-TEETH)
102-8705	[1]	PLATE (TOP)
154-0067	[1]	COUPLING-PERMANENT
154-0098	[1]	COUPLING-PERMANENT
419-8920 Y	[1]	PUMP GP-PISTON

		(ABOVE PARTS ARE PART OF HYDRAULIC SYSTEM CONVERSION GROUP 455-1844)

5P-0597	[8]	CLAMP-HOSE
6V-3918 M	[4]	BOLT (M8X1.25X50-MM)
7E-3558	[1]	HOSE
8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
127-8179	[1]	PLATE
152-7996	[1]	HOSE
188-1019	[1]	HOSE
287-6634	[1]	EJECTOR AS
332-9030	[1]	TUBE
346-4791	[5]	CLAMP-BAND
346-4792	[3]	CLAMP-BAND
348-2502	[1]	AIR CLEANER GP
346-6693	[1]	FILTER ELEMENT-AIR (PRIMARY)
346-6694	[1]	FILTER ELEMENT-AIR (SECONDARY)
352-9764	[1]	COVER AS
350-5808 Y	[1]	PRECLEANER GP
369-8755	[1]	HOSE
375-1141	[2]	TUBE
375-7778	[1]	RESTRICTOR
388-7016	[1]	CLAMP-BENT BOLT

		(ABOVE PARTS ARE PART OF AIR INLET & EXHAUST CONVERSION GROUP 455-1843)

E		ORDER BY THE CENTIMETER
G		ORDER BY THE INCH
I		REFER TO HYDRAULIC INFORMATION SYSTEM
J		ORDER BY THE DECIMETER
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP74020029

457-4449: KIT-ENGINE CONVERSION

KIT-ENGINE CONVERSION

457-4449 KIT-ENGINE CONVERSION -REPOWER
S/N 1SL175-UP
PROVIDES A BREAKDOWN OF THE SERVICEABLE PARTS REQUIRED FOR THE REPOWER. EXCLUDING THE ENGINE AND OPTIONAL GROUPS
PART OF 455-1838 CONVERSION AR-MACHINE

i05754706 SEBP7402

For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-4278	[3]	CLAMP-HOSE
2S-3440	[2]	CLAMP-HOSE
3J-7354	[2]	SEAL-O-RING
3K-0360	[3]	SEAL-O-RING
3P-9847	[1]	CLIP
4E-1384	[2]	BUMPER-CONICAL
5D-1026	[5]	CLAMP-BAND
5P-0767 E		HOSE (40-CM)
5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
423-1982 G		HOSE (30-IN)
5P-8309 J		SEAL (50-DM)
5V-8780	[1]	KNOB
6S-8620	[2]	CLAMP-HOSE
6V-0405	[1]	SEAL-BONDED
6V-1355	[1]	ELBOW
6V-3250	[1]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
6V-7238	[1]	VALVE-SHUTOFF
6V-9027	[2]	SEAL-O-RING
7D-7233	[2]	CLIP
7X-0474 M	[4]	BOLT (M10X1.5X220-MM)
7X-0515	[9]	WASHER-HARD (17X35X5-MM THK)
7X-0579	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
7X-1443	[10]	PROTECTOR
7X-7729	[96]	WASHER (11X25X3-MM THK)
7Y-1976 E		HOSE-WATER (203-CM)
8C-5058 E		SEAL (225-CM)
8T-0119	[1]	ELBOW
8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
8T-4132 M	[1]	NUT (M16X2-THD)
8T-4136 M	[16]	BOLT (M10X1.5X25-MM)
8T-4137 M	[12]	BOLT (M10X1.5X20-MM)
8T-4138 M	[11]	BOLT (M6X1X20-MM)
8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
8T-4195 M	[79]	BOLT (M10X1.5X30-MM)
8T-4196 M	[10]	BOLT (M10X1.5X35-MM)
8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4226	[21]	WASHER-PLATED (10.5X45X3-MM THK)
8T-4779 M	[1]	BOLT (M16X2X35-MM)
8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
8T-7338 M	[8]	BOLT (M16X2X45-MM)
8T-7524	[1]	SEAL-O-RING
8T-7547 M	[4]	BOLT (M8X1.25X30-MM)
8T-7863	[1]	CONNECTOR
8T-7909	[1]	ADAPTER
8T-7934	[6]	WASHER-HARD (11X21X5-MM THK)
8T-8919	[4]	BOLT (1/2-13X1.75-IN)
9M-8406	[2]	CLIP (LOOP)
9U-6999	[1]	ELBOW AS
7M-8485	[1]	SEAL-O-RING
034-4202	[1]	ELBOW
9X-8256	[15]	WASHER (6.6X12X2-MM THK)
033-8248	[2]	CLIP
112-5344	[1]	LATCH AS-DOOR
127-9323	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
459-0653	[1]	ADAPTER
149-8142	[1]	CONNECTOR
154-9023	[1]	VALVE-SAMPLING
157-0670	[1]	CAP-DUST
168-2067	[2]	MOUNT AS
179-9348	[1]	VALVE-DRAIN
198-4777	[4]	WASHER-HARD (11X25X10-MM THK)
200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
204-2281	[2]	STRAP-CABLE
209-4573	[8]	CLAMP-T BOLT
209-5528	[1]	STRIKER
211-8071	[5]	CAP-PROTECTIVE
211-8073	[6]	CAP-PROTECTION
216-4983	[2]	CLAMP-T BOLT
226-0291 N	[1]	LOCK AS
226-0321	[1]	CAM
235-9822	[1]	CONE
242-6099	[1]	CLIP
243-2289	[2]	MOUNT AS
243-3416	[1]	ADAPTER
246-0511	[1]	SPACER (50.3X127X8-MM THK)
246-0616	[1]	SPIDER AS-FAN (8-BLADE)
246-6152 Y	[1]	MOTOR GP-GEAR
277-8628	[2]	MOUNT
278-2656	[1]	DEFLECTOR
297-1546	[1]	CLIP
300-7318 E		SEAL (115-CM)
301-3004	[1]	FILM-INSTRUCTION (MAXIMUM COOLANT LEVEL)
301-3005	[1]	FILM-INSTRUCTION (MINIMUM COOLANT LEVEL)
310-5893	[1]	CONNECTOR
312-6458 E		TAPE-REFLECTIVE (12-CM)
315-6643	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
316-2616	[1]	HINGE AS
8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
321-8444	[1]	BRACKET
322-0907	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
322-0909	[1]	SUPPORT AS
4E-0019	[1]	BOSS (M10X1.5-THD)
6V-9632 M	[4]	NUT-WELD (M6X1-THD)
8T-3490 M	[5]	NUT-WELD (M10X1.5-THD)
9R-2613 M	[1]	BOSS-WELD (M10X1.5X25-MM)
322-0911	[1]	SUPPORT AS
4E-0019	[2]	BOSS (M10X1.5-THD)
6V-9632 M	[4]	NUT-WELD (M6X1-THD)
8T-3490 M	[8]	NUT-WELD (M10X1.5-THD)
9R-2613 M	[1]	BOSS-WELD (M10X1.5X25-MM)
322-0913	[1]	SUPPORT AS
8T-3490 M	[15]	NUT-WELD (M10X1.5-THD)
322-0916	[1]	SUPPORT AS
8T-3490 M	[13]	NUT-WELD (M10X1.5-THD)
322-0918	[1]	SUPPORT AS-MOTOR
8T-3490 M	[12]	NUT-WELD (M10X1.5-THD)
8T-3597 M	[10]	NUT-WELD (M12X1.75-THD)
9R-2613 M	[2]	BOSS-WELD (M10X1.5X25-MM)
322-0920	[1]	SHROUD AS
322-0925	[1]	PLATE
322-0950	[1]	TUBE AS
322-0952	[1]	HOSE
322-0953	[1]	BRACKET AS
8T-3490 M	[9]	NUT-WELD (M10X1.5-THD)
322-0955	[1]	HOSE
322-0959	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
240-9977	[2]	BOSS
322-0961	[1]	BRACKET
322-0963	[1]	BAFFLE AS
6B-4594	[7]	RIVET
322-0965	[2]	HOSE
322-0981	[1]	BAFFLE AS
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
322-0983	[1]	BAFFLE AS
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
322-0989	[1]	BRACKET AS
8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
322-0995	[1]	ANGLE
326-3579	[2]	COVER AS
		(EACH INCLUDES)
8T-5372 D		SEAL (1.1-M)
194-5278	[2]	HINGE
329-8587	[1]	CORE AS-CONDENSER
317-8141	[4]	MOUNT
331-8065	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
334-3325	[1]	CORE AS-FUEL COOLER
486-0884 Y	[1]	TANK GP-COOLANT
337-8788	[1]	ELBOW
339-5128	[1]	COOLER AS-TRANSMISSION OIL
7J-5544	[1]	FITTING (3/4X16-THD)
339-5132	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
339-9852	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
344-5673 M	[4]	NUT (M6X1-THD)
344-5674 M	[2]	NUT (M8X1.25-THD)
344-5675 M	[13]	NUT (M10X1.5-THD)
345-8264	[2]	BRACKET AS
		(EACH INCLUDES)
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
345-8266	[2]	BRACKET AS
		(EACH INCLUDES)
8T-3490 M		NUT-WELD (M10X1.5-THD)
349-5934	[1]	CORE AS-HYDRAULIC OIL COOLER
349-6239 E		HOSE (179-CM)
351-0798	[1]	GUARD AS-FAN
351-9047 E		HOSE (27-CM)
351-9048 E		HOSE (159-CM)
352-3588 E		SEAL (180-CM)
469-0653	[1]	BRACKET
358-2477	[2]	PLATE AS
		(EACH INCLUDES)
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
358-3154 E		SEAL (111-CM)
364-4167	[1]	CORE AS-AFTERCOOLER
364-9871	[1]	TUBE AS
364-9875	[1]	HOSE
364-9899	[1]	BAFFLE AS
6V-9632 M	[3]	NUT-WELD (M6X1-THD)
417-5125	[1]	CORE AS-RADIATOR

		(ABOVE PARTS ARE PART OF COOLING SYSTEM CONVERSION GROUP 455-1842)

2S-6024	[2]	FUSE (5-AMPERE)
2V-7087	[3]	LENS-AMBER
2V-7088	[2]	LENS-RED
3E-2035	[1]	SWITCH AS-PRESSURE
7N-7779	[1]	SOCKET-CONNECTOR (14-GA TO 18-GA)
7N-7780	[1]	PIN-CONNECTOR (14-GA TO 18-GA)
7N-9738	[1]	HOUSING-RECEPTACLE (14-GA TO 18-GA)
3E-5239	[2]	RELAY AS (24-VOLT)
3E-5370	[1]	SENSOR GP-TEMPERATURE
8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
9X-1813 E		SLEEVE (34-CM)
3J-1907	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
3K-8782	[1]	FUSE (10-AMPERE)
4K-5122	[3]	HOLDER AS-FUSE
		(EACH INCLUDES)
6T-8115	[1]	NUT (1/2-24-THD)
139-0178	[1]	CAP
5P-5528	[1]	BUSHING-REDUCER
6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)
6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
9B-7233	[2]	LOCKWASHER
6V-1722	[1]	ADAPTER
6V-5048	[1]	SEAL-O-RING
6V-9028	[1]	SEAL-O-RING
8T-7524	[2]	SEAL-O-RING
8T-7860	[1]	BUSHING-REDUCER
8T-7863	[1]	CONNECTOR
9X-3271	[1]	ADAPTER (1/2-14-THD)
9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
3E-4367	[1]	RING-RETAINING
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
100-3245	[5]	LAMP (24-VOLT, 0.17-AMPERE)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
176-9299	[1]	KIT-RECEPTACLE (3-PIN)
		(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
112-9611	[14]	TERMINAL-BLADE (18-GA TO 20-GA)
139-4724	[1]	CIRCUIT BREAKER AS (30-AMPERE)
6V-8378	[2]	NUT (10-32-THD)
8F-1434	[2]	LOCKWASHER
8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
156-0518	[5]	SOCKET AS
		(EACH INCLUDES)
6V-8367	[1]	LOCKWASHER
6V-8382	[1]	NUT-HEX (11/16-27-THD)
168-8806	[1]	CONNECTOR
171-2205	[1]	CIRCUIT BREAKER AS (40-AMPERE)
174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
180-9900	[1]	CAP AS
5P-7958	[1]	SLEEVE-CABLE SPLICE
8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
179-9392	[1]	LANYARD
203-9007	[1]	NUT (1-1/2-18-THD)
217-9039	[12]	STRAP-CABLE
221-3408	[1]	SENSOR GP-PRESSURE
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
194-5226	[3]	WIRE AS (16-GA)
		-OR-
194-5227	[3]	WIRE AS (14-GA)
230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
		(EACH INCLUDES)
455-0704	[1]	SEAL-CONNECTOR
230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
455-0705	[1]	SEAL-CONNECTOR
231-4502	[1]	GUARD
238-5080	[1]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
239-1134 Y	[1]	VALVE GP-ETHER STARTING (24-VOLT)
241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)
245-7434	[1]	KIT-CONNECTING PLUG (10-PIN)
255-2752 Y	[1]	SWITCH GP-START (IGNITION)
256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)
256-6454	[1]	SENSOR-TEMPERATURE (2-PIN)
262-4806 Y	[1]	SENSOR GP-SPEED (ENGINE OUTPUT)
265-4123	[1]	RECEPTACLE AS-CONNECTOR (9-PIN)
270-2679	[1]	LOCKWASHER
290-1993	[2]	STRAP-CABLE
301-2981	[1]	SWITCH AS-TOGGLE
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
112-4550 E		SLEEVE (19-CM)
327-6999	[1]	SWITCH AS-ROCKER (DPF REGENERATION)
331-6215	[1]	GROMMET
332-1064	[1]	PLUG-ILLUMINATED
332-7333	[1]	INDICATOR GP-AIR FILTER CHANGE
205-1627	[1]	BRACKET
349-0951	[10]	CLIP
350-8529 Y	[1]	HARNESS AS-CHASSIS (COOLANT OVERFLOW)
359-1431 Y	[1]	DISPLAY GP-MONITOR
361-7094 Y	[1]	HARNESS AS-POWER
364-0613 Y	[1]	HARNESS AS-ENGINE
383-1467	[1]	PEDAL GP-GOVERNOR
269-1983		SENSOR GP-POSITION (ROTARY)
292-9802	[1]	COVER

		(ABOVE PARTS ARE PART OF ELECTRICAL CONVERSION GROUP 455-1840)

5K-9090	[2]	SEAL-O-RING
6V-8726	[2]	CONNECTOR
6V-9008	[2]	ELBOW
7M-8485	[2]	SEAL-O-RING
124-2123	[4]	COUPLING-ORFS
313-1388 E		HOSE (200-CM)

		(ABOVE PARTS ARE PART OF POWER TRAIN CONVERSION GROUP 455-1841)

1P-4278	[4]	CLAMP-HOSE
1S-0994	[1]	CLIP (LOOP)
3E-4883	[2]	SLEEVE
3S-2093	[2]	STRAP-CABLE
4D-7733	[3]	CLIP (LOOP)
4D-9517	[2]	CLIP
5D-1026	[1]	CLAMP-BAND
165-0016 G		HOSE (44-IN)
5P-0767 E		HOSE (36-CM)
5P-2566	[8]	BOLT (1/2-13X1.5-IN)
5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
5P-4325	[1]	CLIP
5P-4961	[5]	CLAMP-HOSE
5P-9299	[3]	CLIP (LOOP)
5T-6374	[1]	SPACER (10.5X20X40-MM THK)
6V-1889	[1]	CLIP (LOOP)
6V-8245	[3]	ELBOW
6V-8634	[1]	CONNECTOR
6V-8724	[1]	ELBOW
6V-9027	[4]	SEAL-O-RING
6V-9028	[1]	SEAL-O-RING
6V-9200	[1]	ELBOW
6V-9850	[1]	ELBOW
6V-9872	[2]	CONNECTOR
7K-1181	[3]	STRAP-CABLE
7X-0579	[6]	WASHER-HARD (8.8X25.5X2-MM THK)
7X-1463	[6]	COUPLING-STRAIGHT
7X-2622	[2]	WASHER (22X115X10-MM THK)
8C-6959 E		HOSE (111-CM)
8C-8478 M	[2]	BOLT (M20X2.5X140-MM)
9X-2373 G		HOSE (158-IN)
8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
8T-4123	[4]	WASHER (3.62X5.75X0.375-MM THK)
8T-4131 M	[2]	NUT (M20X2.5-THD)
8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
8T-4137 M	[12]	BOLT (M10X1.5X20-MM)
8T-4174 M	[4]	BOLT (M16X2X120-MM)
8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
8T-4198 M	[2]	BOLT (M10X1.5X100-MM)
8T-4223	[56]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-5439	[4]	WASHER-HARD (21.5X45X6-MM THK)
8T-6381 M	[2]	BOLT (M20X2.5X120-MM)
8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
8T-6725	[1]	CONNECTOR
8T-6869 M	[3]	BOLT (M8X1.25X60-MM)
8T-7860	[1]	BUSHING-REDUCER
8T-8919	[28]	BOLT (1/2-13X1.75-IN)
8T-9655	[6]	MOUNT-ISOLATION
8X-0674	[2]	WASHER (22X100X10-MM THK)
9M-8406	[8]	CLIP (LOOP)
9S-4185	[2]	PLUG (3/4-16-THD)
9W-9930	[2]	MOUNT AS
9X-2134	[2]	ELBOW
9X-3887	[1]	COUPLING
9X-3893	[2]	COUPLING
9X-3899	[1]	COUPLING
9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
124-3019	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
130-5300	[1]	CLIP
137-4499	[2]	CLAMP AS
		(EACH INCLUDES)
6V-8801	[1]	NUT (3/8-16-THD)
8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
177-0581	[2]	HOSE
191-1782	[3]	SPACER (8.5X12.7X38.2-MM THK)
198-4777	[1]	WASHER-HARD (11X25X10-MM THK)
209-4578	[8]	CLAMP-T BOLT
211-8071	[4]	CAP-PROTECTIVE
211-8073	[6]	CAP-PROTECTION
212-6934	[1]	CLAMP-T BOLT
214-7566	[3]	SEAL-O-RING
214-7568	[2]	SEAL-O-RING
216-4983	[3]	CLAMP-T BOLT
218-1755	[1]	ELBOW
220-1241	[2]	MOUNT AS
221-5252	[4]	CLAMP-HOSE
227-5714	[1]	ELBOW
228-7089	[12]	SEAL-O-RING
228-7100	[1]	SEAL-O-RING
228-7102	[3]	SEAL-O-RING
238-5080	[4]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING
263-2525	[1]	ELBOW-TUBE
291-2275	[1]	BRACKET AS
2W-7940	[1]	BRACKET
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
297-7964	[1]	CONNECTOR
310-5893	[1]	CONNECTOR
320-8855	[1]	TUBE
323-6157	[2]	COUPLING AS-PERMANENT
323-6164	[2]	COUPLING AS-PERMANENT
323-6168	[1]	COUPLING AS-PERMANENT
325-5868	[2]	HOSE-ELBOW
343-4380	[1]	HOSE
346-3575	[2]	HOSE-AIR
347-8645 E		HOSE (1000-CM)
347-8646 E		HOSE (460-CM)
349-6970	[1]	FILM-INFORMATION (FUEL, READ OMM)
349-8603	[1]	FILM-INSTRUCTION (FUEL, READ OMM)
351-9047 E		HOSE (300-CM)
354-0865	[1]	HOSE
355-0633	[1]	COUPLER-QUICK DISCONNECT
361-5097 Y	[1]	PUMP GP-FUEL (24-VOLT, ARD)
362-1304	[1]	TUBE
363-4357	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
371-7205	[1]	ADAPTER-ELBOW
525-6205	[1]	FILTER AS-FUEL (IN-LINE)
446-5409	[1]	PUMP AS-FUEL TRANSFER (24-VOLT)

		(ABOVE PARTS ARE PART OF ENGINE INSTALLATION GROUP 455-1839)

2K-4821	[1]	LOCKNUT (5/8-18-THD)
2S-4078	[1]	SEAL-O-RING
3D-2824	[8]	SEAL-O-RING
3J-1907	[5]	SEAL-O-RING
3J-7354	[2]	SEAL-O-RING
3K-0360	[3]	SEAL-O-RING
5P-9617	[1]	ADAPTER
6D-4244	[20]	CLIP
6V-0852	[2]	CAP-DUST
6V-3965	[2]	FITTING (QUICK DISCONNECT)
6V-8397	[4]	SEAL-O-RING
6V-8398	[6]	SEAL-O-RING
6V-8400	[1]	SEAL-O-RING
6V-8713	[1]	CONNECTOR
6V-8724	[2]	ELBOW
6V-8782	[1]	TEE
6V-8943	[1]	REDUCER
6V-8982	[1]	ELBOW
6V-8989	[1]	ELBOW
6V-9004	[1]	ELBOW
6V-9169	[1]	NUT (13/16-16-THD)
6V-9170	[2]	NUT-BULKHEAD (1-14-THD)
6V-9510	[1]	PLUG
6V-9746	[7]	SEAL-O-RING
6V-9845	[1]	TEE-SWIVEL
6V-9846	[1]	TEE
6V-9850	[1]	ELBOW
6V-9851	[1]	ELBOW
6V-9872	[1]	CONNECTOR
6V-9873	[1]	CONNECTOR
7J-9108	[16]	SEAL-O-RING
7X-0592	[6]	WASHER-HARD (10.2X32X5-MM THK)
7X-0872	[2]	TEE-SWIVEL
7X-7729	[2]	WASHER (11X25X3-MM THK)
8C-3446	[1]	VALVE-SAMPLING
8C-3451	[1]	CAP-DUST (HYDRAULIC OIL)
8C-6758	[1]	CONNECTOR
8C-8417	[1]	CONNECTOR
8T-0404	[2]	ELBOW
8T-1718	[2]	ELBOW
8T-3611	[1]	CONNECTOR
8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
9X-2538	[2]	ELBOW
067-2551	[5]	CLIP
110-6349	[1]	FITTING AS (QUICK DISCONNECT)
122-6906 G		HOSE-HYDRAULIC (73-IN)
124-1212	[1]	FITTING
124-2114	[3]	COUPLING
124-2116	[1]	COUPLING-PERMANENT
124-2119	[10]	COUPLING-PERMANENT
124-2120	[1]	COUPLING-PERMANENT
124-2124	[2]	COUPLING-PERMANENT
124-2131	[1]	COUPLING-PERMANENT
124-2151	[2]	COUPLING-PERMANENT
156-9791	[2]	CONNECTOR-SPECIAL
175-0447	[1]	VALVE AS-CHECK
3D-2824	[1]	SEAL-O-RING
6V-9746	[1]	SEAL-O-RING
191-8735 Y	[1]	VALVE GP-DEMAND FAN
194-2554	[1]	TEE
214-7568	[2]	SEAL-O-RING
244-1426 Y	[1]	VALVE GP-CHECK
248-6816	[3]	MOUNT
423-1974 E		HOSE (254-CM)
291-6531	[1]	GASKET
295-6259 Y	[1]	FILTER GP-OIL
313-1387 E		HOSE (684-CM)
341-0107	[2]	ELBOW
355-3995	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
358-2446	[1]	BRACKET
358-2512 Y	[1]	PUMP GP-PISTON
364-8026	[1]	PLATE AS
8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
372-5335 I	[1]	HOSE AS
372-5336 I	[1]	HOSE AS
397-9301	[2]	WASHER-HARD (11.5X20X15-MM THK)
419-4941	[1]	GEAR-IDLER (36-TEETH)

		(ABOVE PARTS ARE PART OF HYDRAULIC SYSTEM CONVERSION GROUP 455-1845)

5P-0597	[8]	CLAMP-HOSE
5P-2817 E		HOSE (150-CM)
6V-3918 M	[4]	BOLT (M8X1.25X50-MM)
7E-3558	[1]	HOSE
8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
127-8178	[1]	VALVE AS-CHECK
152-7996	[1]	HOSE
188-1019	[1]	HOSE
287-6634	[1]	EJECTOR AS
332-9030	[1]	TUBE
346-4791	[5]	CLAMP-BAND
346-4792	[3]	CLAMP-BAND
348-2502	[1]	AIR CLEANER GP
352-9764	[1]	COVER AS
346-6693	[1]	FILTER ELEMENT-AIR (PRIMARY)
346-6694	[1]	FILTER ELEMENT-AIR (SECONDARY)
350-5808 Y	[1]	PRECLEANER GP
369-8755	[1]	HOSE
375-1141	[2]	TUBE
375-7778	[1]	RESTRICTOR
388-7016	[1]	CLAMP-BENT BOLT

		(ABOVE PARTS ARE PART OF AIR INLET & EXHAUST SYSTEM CONVERSION GROUP 455-1843)

D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
G		ORDER BY THE INCH
I		REFER TO HYDRAULIC INFORMATION SYSTEM
J		ORDER BY THE DECIMETER
M		METRIC PART
N		REQUIRES CORPORATE KEY
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CYLINDER HEAD GP

Special Instruction

3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}

Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}

Service Letter-NACD

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Product Support Program For Replacing Exhaust Valve Guides On Certain 12H, 14H, 140H, 143H, 160H And 163H Motor Graders, D4ESR, D5E, D6R, D6RLPG, D6RFTC, D6RDS, D6RXR D6GPS, D6GSR And D7R Track Type Tractors, 615C And 627F Scrapers, 966F And 970F Wheel Loaders, 330B And 350 Excavators, 815F And 816F Compactors, Challenger 65D AG Tractors, 525 And 528B Skidders
Product Support Program For Replacing Exhaust Valve Guides On Certain 12H, 14H, 140H, 143H, 160H And 163H Motor Graders, D4ESR, D5E, D6R, D6RLPG, D6RFTC, D6RDS, D6RXR D6GPS, D6GSR And D7R Track Type Tractors, 615C And 627F Scrapers, 966F And 970F Wheel Loaders, 330B And 350 Excavators, 815F And 816F Compactors, Challenger 65D AG Tractors, 525 And 528B Skidders

Service Letter-Australia

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-CFEL

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-CSARL

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Americas

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Brazil

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Truck/Ag/Marine

Specifications

Cylinder Head
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Valve Cover
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Fuel Injection Nozzles
3306C Engines for Caterpillar Built Machines

Cylinder Head
3306C Engines for Caterpillar Built Machines

Cylinder Head Valves
3306C Engines for Caterpillar Built Machines

Tool Operating Manual

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}

Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}

185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}

188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}

CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Service Letter-China

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Asia

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Reuse And Salvage Guidelines

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Applied Failure Analysis

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Service Letter-APD

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Testing and Adjusting

Fuel Injection Nozzle - Test
3306C Engines for Caterpillar Built Machines

Engine Valve Lash - Inspect/Adjust
3306C Engines for Caterpillar Built Machines

Disassembly and Assembly

Valve Cover
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER

Cylinder Head
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER

Valves
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER

Valve Seat Inserts
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER

Water Directors
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER

Valve Guides
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER

Inlet and Exhaust Valves - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Cylinder Head - Remove
3304B and 3306B Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Cylinder Head - Install
3304B and 3306B Engines for Caterpillar Built Machines

Service Magazine

Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17

Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10

Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Check For Interference Between Water Temperature Regulator And Cylinder Head Bore{1355}
1985/05/13

Use Correct Valves When Rebuilding Engines{1105,1103}
1985/09/02

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09

Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30

Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30

Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06

Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14

Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20

New Valve Guide Available{1104}
1995/12/25

New Valve Cover Seal Used {1107}
1998/05/25

New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking In 3304 And 3306 Machine Engines {1104,1105}
1998/06/22

New Specification for Reusability of the Intake Valves and Exhaust Valves {1105}
2002/05/13

Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03

Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11

Caterpillar Parts SIS Catalog 966F II :

389-1346 CYLINDER HEAD GP

389-0955 CYLINDER HEAD AS

351-8921 CYLINDER BLOCK GP

363-7645 CYLINDER BLOCK AS

346-4745 CRANKSHAFT GP

332-0103 DRAIN GP-ENGINE OIL

327-0676 DRIVE GP-FAN

321-7297 FASTENER GP-DAMPER

321-7326 FLYWHEEL GP

363-5082 HOUSING GP-FLYWHEEL

349-8575 HOUSING GP-FRONT

328-7401 JET GP-PISTON COOLING

457-4446 KIT-ENGINE CONVERSION

Truck sale:

Caterpillar 966F II
- Wheel Loaders
FABICK CAT

Caterpillar 966FII, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT

52,228 USD

Caterpillar 966FII, Construction
- Wheel Loaders
TRACTOR & EQUIPMENT CO.

Caterpillar 966FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT

80,000

Caterpillar 966FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT