FUEL SYSTEM
TORQUE CONTROL GPPOWER TRAIN
COOLER GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSGASKET & SEAL KITS
FUEL SYSTEM
TORQUE CONTROL GP
#SEBP74050080
8N-7276: TORQUE CONTROL GP
8N-7276 TORQUE CONTROL GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
PART OF 127-8154 PUMP GP-GOV & FUEL INJ
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
PART OF 127-8154 PUMP GP-GOV & FUEL INJ
For full view, you need register
Parts for your 627B WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-1796 C | [1] | SPACER (1.549-MM THK) | |
| 2. | 8N-7519 | [1] | SPRING-TORQUE (0.635-MM THK) | |
| 3. | 2W-7234 | [1] | BAR-LOAD STOP (4-MM) | |
| 4. | 6L-5897 C | [2] | BOLT (1/4-20X0.875-IN) | |
| 5. | 8M-9062 | [1] | RETAINER-SPRING (3.05-MM THK) | |
| 6. | 2P-2685 | [1] | SPACER (0.635-MM THK) | |
| 7. | 1P-6452 | [1] | INSULATOR | |
| 8. | 7W-5700 C | [1] | CONTACT | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP74050081
7W-1144: COOLER GP-TRANSMISSION OIL
7W-1144 COOLER GP-TRANSMISSION OIL
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
For full view, you need register
Parts for your 627B WHEEL SCRAPER:
CATERPILLAR SIS#SEBP74050082
339-6231: FILM GP
339-6231 FILM GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
FOR USE WITH 3300 CAPTIVE ENGINES BUILT AT CIPL-PSD
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
FOR USE WITH 3300 CAPTIVE ENGINES BUILT AT CIPL-PSD
For full view, you need register
Parts for your 627B WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7E-8050 | [1] | FILM GP (EPA CERTIFICATION) | ||
| INSTALL ON TOP OF VALVE COVER TOWARDS FRONT OF ENGINE READABLE FROM RIGHT HAND SIDE OF ENGINE IF POSSIBLE, | ||||
| OR LEFT HAND SIDE OF BLOCK JUST ABOVE ENGINE INFO LABEL. | ||||
| INSTALL LAMINANT ON TOP OF FILM. | ||||
| 115-5852 | [1] | PLATE & FILM GP (ENGINE INFORMATION) | ||
| INSTALL ON LEFT HAND REAR SIDE OF BLOCK. | ||||
| INSTALL LAMINANT OVER SILVER FILM. | ||||
| 3N-3790 | [1] | PLATE-SERIAL NUMBER (ENGINE) | ||
| INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON CAST PAD ON UPPER LEFT HAND SIDE OF CYLINDER BLOCK. | ||||
| STAMP SERIAL NUMBER IN CYLINDER BLOCK JUST BELOW SERIAL NUMBER PLATE IN CHARACTERS SIZE 6 MM HIGH. | ||||
| 274-7398 | [1] | TAG-INFORMATION (CRANKCASE, NO OIL) | ||
| INSTALL 'NO OIL' TAG AS REQUIRED ON ENGINES SHIPPED WITHOUT OIL IN THE CRANKCASE. | ||||
| ATTACH WITH WIRE TO OIL GAGE RING HANDLE, OR ONTO OIL FILLER CAP T-HANDLE, NECESSARY TO BE EASILY VISIBLE ON ENGINE. | ||||
#SEBP74050083
281-0029: KIT-GASKET
281-0029 KIT-GASKET -SINGLE FUEL INJECTOR SEALS
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
PART OF 393-3560 KIT-ENGINE OVERHAUL
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
PART OF 393-3560 KIT-ENGINE OVERHAUL
For full view, you need register
Parts for your 627B WHEEL SCRAPER:
CATERPILLAR SIS#SEBP74050084
392-0166: KIT-GASKET
392-0166 KIT-GASKET -SINGLE CYLINDER HEAD
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD
PART OF 393-3560 KIT-ENGINE OVERHAUL
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD
PART OF 393-3560 KIT-ENGINE OVERHAUL
For full view, you need register
Parts for your 627B WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-7128 | [1] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 2A-3541 | [1] | GASKET | ||
| 4M-6480 | [1] | GASKET | ||
| 5S-6735 | [4] | GASKET | ||
| 7N-0200 | [1] | GASKET | ||
| 7N-0944 | [1] | GASKET | ||
| 2F-7761 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 111-8015 | [1] | GASKET AS-CYLINDER HEAD | ||
| 2P-6132 | [1] | GASKET-ELBOW | ||
| 1N-9372 | [1] | GASKET-FLANGE (AIR INLET) | ||
| 9Y-1979 | [3] | GASKET-MANIFOLD | ||
| 1S-4810 | [1] | GASKET-OIL DRAIN | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 115-7550 | [1] | GASKET-PLATE | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 5L-8855 | [2] | RING-METAL SEAL | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 4L-8337 | [2] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 5M-5860 | [2] | SEAL-O-RING | ||
| 6L-1648 | [2] | SEAL-O-RING | ||
| 7L-9061 | [1] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 8M-4448 | [1] | SEAL-O-RING | ||
| 9M-4849 | [1] | SEAL-O-RING | ||
| 133-1247 | [1] | SEAL-VALVE COVER | ||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
| 9M-6527 | [5] | WASHER-HARD (10.2X25.5X5-MM THK) |
#SEBP74050085
5P-8768: KIT-GASKET
5P-8768 KIT-GASKET -SINGLE CYLINDER LINER
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
PART OF 20R-1430, 20R-1456, 398-0455 KIT-ENGINE OVERHAUL
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
PART OF 20R-1430, 20R-1456, 398-0455 KIT-ENGINE OVERHAUL
For full view, you need register
