BASIC ENGINE
SERPENTINE/V-BELTSBELT TIGHTENER GP
SERPENTINE/V-BELTS
BASIC ENGINE
SERPENTINE/V-BELTS
#SEBP74110090
350-3719: BELT GP-SERPENTINE
350-3719 BELT GP-SERPENTINE
S/N C9N1-UP; D9N1-UP
8-RIB POLY VEE BELT TO DRIVE WATER PUMP AND ALTERNATOR MOUNTED ON UPPER LEFT HAND SIDE OF ENGINE
PART OF 366-5662 ENGINE AR-COMPLETE
FOR USE WITH REFRIGERANT COMPRESSOR, FAN DRIVES
ALSO AN ATTACHMENT
S/N C9N1-UP; D9N1-UP
8-RIB POLY VEE BELT TO DRIVE WATER PUMP AND ALTERNATOR MOUNTED ON UPPER LEFT HAND SIDE OF ENGINE
PART OF 366-5662 ENGINE AR-COMPLETE
FOR USE WITH REFRIGERANT COMPRESSOR, FAN DRIVES
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 359-0196 | [1] | BELT-SERPENTINE (ALTERNATOR) |
#SEBP74110091
352-9294: BELT GP-SERPENTINE
352-9294 BELT GP-SERPENTINE
S/N C9N1-UP; D9N1-UP
PROVIDES 8 RIB POLY-RIB BELT FOR LEFT HAND SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR
FOR USE WITH ALTERNATOR MOUNTING GP, ALTERNATOR GP, AND A/C COMPRESSOR GP
CANNOT BE USED WITH FAN DRIVE
AN ATTACHMENT
S/N C9N1-UP; D9N1-UP
PROVIDES 8 RIB POLY-RIB BELT FOR LEFT HAND SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR
FOR USE WITH ALTERNATOR MOUNTING GP, ALTERNATOR GP, AND A/C COMPRESSOR GP
CANNOT BE USED WITH FAN DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 374-8492 | [1] | BELT-SERPENTINE |
#SEBP74110092
352-9296: BELT GP-SERPENTINE
352-9296 BELT GP-SERPENTINE
S/N C9N1-UP; D9N1-UP
PROVIDES 8-RIB POLY-VEE BELT FOR LH SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR
FOR USE WITH MOUNTING GP-ALTERNATOR, ALTERNATOR GP, FAN DRIVE GP, A/C COMPRESSOR
AN ATTACHMENT
S/N C9N1-UP; D9N1-UP
PROVIDES 8-RIB POLY-VEE BELT FOR LH SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR
FOR USE WITH MOUNTING GP-ALTERNATOR, ALTERNATOR GP, FAN DRIVE GP, A/C COMPRESSOR
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 435-4150 | [1] | BELT-SERPENTINE |
#SEBP74110093
359-6017: BELT GP-SERPENTINE
359-6017 BELT GP-SERPENTINE
S/N C9N1-UP; D9N1-UP
PROVIDES 8 RIB BELT FOR RIGHT HAND ACCESSORY DRIVE. WILL DRIVE ALTERNATOR AND WATER PUMP ONLY.
FOR USE WITH RIGHT HAND SIDE FEED GP
AN ATTACHMENT
S/N C9N1-UP; D9N1-UP
PROVIDES 8 RIB BELT FOR RIGHT HAND ACCESSORY DRIVE. WILL DRIVE ALTERNATOR AND WATER PUMP ONLY.
FOR USE WITH RIGHT HAND SIDE FEED GP
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-0492 | [1] | BELT-SERPENTINE |
#SEBP74110094
359-6018: BELT GP-SERPENTINE
359-6018 BELT GP-SERPENTINE
S/N C9N1-UP; D9N1-UP
PROVIDES 12 RIB BELT FOR POLY RIB FAN DRIVE GP
FOR USE WITH POLY RIB FAN DRIVE GP WITH 0.84:1 PULLEY RATIO
AN ATTACHMENT
S/N C9N1-UP; D9N1-UP
PROVIDES 12 RIB BELT FOR POLY RIB FAN DRIVE GP
FOR USE WITH POLY RIB FAN DRIVE GP WITH 0.84:1 PULLEY RATIO
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-0493 | [1] | BELT-SERPENTINE |
#SEBP74110095
380-0940: BELT GP-SERPENTINE
380-0940 BELT GP-SERPENTINE
S/N C9N1-UP; D9N1-UP
FOR USE WITH REFRIGERANT COMPRESSOR, FAN DRIVES
AN ATTACHMENT
S/N C9N1-UP; D9N1-UP
FOR USE WITH REFRIGERANT COMPRESSOR, FAN DRIVES
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 374-8471 | [1] | BELT-SERPENTINE (ALTERNATOR) |
#SEBP74110096
354-4026: BELT TENSIONER GP
354-4026 BELT TENSIONER GP
S/N C9N1-UP; D9N1-UP
PART OF 354-4028 DRIVE GP-WATER PUMP
FOR USE WITH WATER PUMP ONLY BELT DRIVES
ALSO AN ATTACHMENT
S/N C9N1-UP; D9N1-UP
PART OF 354-4028 DRIVE GP-WATER PUMP
FOR USE WITH WATER PUMP ONLY BELT DRIVES
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP74110097
351-6914: BELT TIGHTENER GP
351-6914 BELT TIGHTENER GP
S/N C9N1-614
FAN
PART OF 352-9264 MOUNTING GP-FAN DRIVE
AN ATTACHMENT
S/N C9N1-614
FAN
PART OF 352-9264 MOUNTING GP-FAN DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-5238 | [1] | SEAL-V-RING | |
| 2. | 296-8187 M | [1] | BOLT (M12X1.75X191.5-MM) | |
| 3. | 347-4674 | [1] | WASHER-RETAINING (14X47.5X6.3-MM THK) | |
| 4. | [1] | SUPPORT AS | ||
| 332-9270 | [2] | BUSHING | ||
| 5. | 351-0502 | [1] | SPACER-BEARING (35X44.45X20.75-MM THK) | |
| 6. | 351-0503 | [1] | COVER | |
| 7. | 351-0505 | [1] | SHAFT | |
| 8. | 351-0506 | [1] | PULLEY-TIGHTENER (4-GROOVE) | |
| 9. | 351-0627 | [1] | SPACER-SPECIAL | |
| 10. | 129-3180 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 11. | 3B-1250 | [1] | NUT (2.625X0.75-IN) | |
| 12. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 6H-3956 | [1] | PIN | |
| 14. | 6V-3668 M | [1] | BOLT (M12X1.75X30-MM) | |
| 15. | 6V-5217 M | [4] | BOLT (M8X1.25X20-MM) | |
| 16. | 7X-7740 | [1] | WASHER (45X78X8-MM THK) | |
| 17. | 9F-3212 | [2] | BALL BEARING (35-MM ID) | |
| 18. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP74110098
366-2992: BELT TIGHTENER GP
366-2992 BELT TIGHTENER GP
S/N C9N615-UP; D9N1-UP
PART OF 352-9264 MOUNTING GP-FAN DRIVE
AN ATTACHMENT
S/N C9N615-UP; D9N1-UP
PART OF 352-9264 MOUNTING GP-FAN DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-5238 | [1] | SEAL-V-RING | |
| 2. | 296-8178 | [1] | WASHER (55X31X8-MM THK) | |
| 3. | 296-8187 M | [1] | BOLT (M12X1.75X191.5-MM) | |
| 4. | 351-0503 | [1] | COVER | |
| 5. | 363-3527 | [1] | SHAFT | |
| 6. | 366-2994 | [1] | SUPPORT AS | |
| 7. | 369-4570 | [1] | SPACER-BEARING | |
| 8. | 369-4608 | [1] | SPACER-BEARING (25.02X34.45X20.95-MM THK) | |
| 9. | 369-9948 | [1] | PULLEY-FAN DRIVE (4-GROOVE) | |
| 10. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 11. | 129-3180 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 12. | 5P-7807 | [2] | BALL BEARING | |
| 13. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 6V-3668 M | [1] | BOLT (M12X1.75X30-MM) | |
| 15. | 6V-5217 M | [4] | BOLT (M8X1.25X20-MM) | |
| 16. | 7X-0618 | [1] | WASHER-HARD (13.5X40X5-MM THK) | |
| 17. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP74110099
350-3718: BELT-SERPENTINE
350-3718 BELT-SERPENTINE
S/N C9N1-UP; D9N1-UP
FOR USE WITH FAN DRIVE
CANNOT BE USED WITH REFRIGERANT COMPRESSOR
AN ATTACHMENT
S/N C9N1-UP; D9N1-UP
FOR USE WITH FAN DRIVE
CANNOT BE USED WITH REFRIGERANT COMPRESSOR
AN ATTACHMENT
For full view, you need register
Parts for your C9.3 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 374-8467 | [1] | BELT-SERPENTINE (ALTERNATOR) |
Information:
BASIC ENGINE
SERPENTINE/V-BELTS
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package
Specifications
Testing and Adjusting
