AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3612 & G3616 Generator & Industrial Engine Overhaul Kit 1YG00001-UP BASIC ENGINE Caterpillar SIS



GAS ENGINE G3612 GAS ENGINE 1YG
 G3612 & G3616 Generator & Industrial Engine Overhaul Kit 1YG00001-UP SEBP7415 G3612 1YG   (1991)

Parts group G3612:

  For full view, you need register
BASIC ENGINE
CYLINDER HEAD GP
CYLINDER HEAD AS
485-9700 CYLINDER HEAD AS
485-9700 CYLINDER HEAD AS
PART OF 485-9701 CYLINDER HEAD GP
CYLINDER HEAD GP
485-9701 CYLINDER HEAD GP
485-9701 CYLINDER HEAD GP
PART OF 504-6527 KIT-CYLINDER HEAD
FIELD REPLACEMENT ORDER @@@@@504-6527@@@@@
KIT-CYLINDER HEAD
504-6527 KIT-CYLINDER HEAD
504-6527 KIT-CYLINDER HEAD
PART OF 453-4741 KIT-ENGINE OVERHAUL
ENGINE OVERHAUL KIT
453-4741 KIT-ENGINE OVERHAUL
453-4741 KIT-ENGINE OVERHAUL
FOR USE WITH 176-3616, 228-8987, & 7C-4116 ENGINE ARRANGEMENTS
FIELD INSTALLATION

Information:

(For parts list, see above)

Engine News
Additional Clamps Added To Air Cleaner Adapter Group For G3600 Engines {5502}
1994/10/01
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Disassembly and Assembly
Air Starting Motor - Disassemble
G3612 and G3616 Engines
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Operation and Maintenance Manual
Barring Device - Lubricate
G3612 and G3616 Engines
Specifications
Manual Barring Group
G3612 and G3616 Engines
Manual Barring Group - 50:1 Reduction
G3612 and G3616 Engines
Systems Operation
Manual Barring Group - 50:1 Reduction
G3612 and G3616 Engines
Disassembly and Assembly
Manual Barring Group - Remove
G3612 and G3616 Engines
Manual Barring Group - Install
G3612 and G3616 Engines
Manual Barring Group - Disassemble
G3612 and G3616 Engines
Manual Barring Group - Assemble
G3612 and G3616 Engines
Barring Group - Remove
G3612 and G3616 Engines
Barring Group - Install
G3612 and G3616 Engines
Barring Group (50:1 Ratio) - Remove
G3612 and G3616 Engines
Barring Group (50:1 Ratio) - Install
G3612 and G3616 Engines
Specifications
Belt Tension Chart
G3612 and G3616 Engines
Engine News
New 8T2998 Lubricant Available
1986/03/01
Improved Camshafts Provide Longer Service Life{1210}
1997/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
A New Camshaft Journal Is Available for Use when the Former Camshaft Segment with the Thin Flange Is Replacedby a Current Camshaft Segment with a Thick Flange {1210}
2008/07/28
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Specifications
Camshaft Bearings
G3612 and G3616 Engines
Camshaft Bearing Position
G3612 and G3616 Engines
Camshaft
G3612 and G3616 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Disassembly and Assembly
Camshaft Bearings - Remove
G3612 and G3616 Engines
Camshaft Bearings - Install
G3612 and G3616 Engines
Camshaft Drive Gear - Remove
G3612 and G3616 Engines
Camshaft Drive Gear - Install
G3612 and G3616 Engines
Camshaft - Remove
G3612 and G3616 Engines
Camshaft - Install
G3612 and G3616 Engines
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Engine News
Part Number Cross-Reference For Caterpillar And Vulkan&copy; Engine Output Flexible Coupling Groups{3279}
1997/05/01
New Coupling Guard Support Group Used{7150,3279}
1999/05/01
New Coupling Assembly Used On G3600 Engine Hydrax Linkages {1057}
1999/11/01
Operation and Maintenance Manual
Driven Equipment - Inspect/Replace/Lubricate
G3612 and G3616 Engines
Driven Equipment - Check
G3612 and G3616 Engines
Specifications
Flexible Coupling
G3612 and G3616 Engines
Flexible Drive
G3612 and G3616 Engines
Flexible Coupling
G3612 and G3616 Engines
Flexible Coupling
G3612 and G3616 Engines
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Crankshaft Oil Passage Plugs
1993/01/01
New Front Crankshaft Adapters and Wear Sleeve Used{1160}
1994/12/01
Main Bearing Cap Installation Procedure{1203}
1995/06/01
Change In Crankshaft Seal Wear Sleeve Installation Procedure{1160,1161}
1995/08/01
New Crankshaft Main Bearing Installation Procedure{1203}
1995/08/01
New Main Bearing Provides Improved Oil Distribution {1203}
1996/01/17
Guidelines For Reusability Of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, And Connecting Rod Cap Bolts And Nuts{1100,1218,1230}
1997/01/22
Crankshaft Oil Passage Plugs {1202}
1997/08/01
Connecting Rod Bearing Part Numbers {1203,1219,1230}
1997/08/01
New Main Bearing Used {1203}
1998/08/01
Crankshaft Oil Passage Plugs Should Be Checked For Tightness On Some Crankshafts At Engine Overhauls{1202}
1999/02/01
Disassembly And Assembly Of Main Bearings For Journals Without Oil Holes {1203}
2000/01/01
New Crankshaft Seal Assemblies And New Crankshaft Wear Sleeves Are Used {1160, 1161, 7558}
2002/07/01
New Crankshaft Assemblies Include Counterweights That Are Permanently Bolted To The Crankshafts {1202, 1231}
2001/12/01
New Connecting Rods And A New Connecting Rod Bearing Are Used {1218, 1230}
2001/07/01
A New Connecting Rod Bearing is Used for High Compression Ratio Generator Set Engines {1219}
2004/07/01
The Stud Tensioner Tool Groups for 3600, C280, and G3600 Engines Require Different Hydraulic Pressures {0703, 0705, 1100, 1202, 1203}
2006/07/03
Replacement Bearings are Listed {1230}
2006/10/02
Procedure To Check Crankshaft Deflection in 3600 and C280 Engines {1202}
2010/04/26
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3612 and G3616 Engines
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Technical Information Bulletin
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Specifications
Connecting Rod and Main Bearing Journals
G3612 and G3616 Engines
Crankshaft
G3612 and G3616 Engines
Crankshaft Seals
G3612 and G3616 Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
Disassembly and Assembly
Crankshaft Front Seal and Wear Sleeve - Remove
G3612 and G3616 Engines
Crankshaft Front Seal and Wear Sleeve - Install
G3612 and G3616 Engines
Crankshaft Rear Seal - Remove
G3612 and G3616 Engines
Crankshaft Rear Seal - Install
G3612 and G3616 Engines
Crankshaft Front Gear - Remove and Install
G3612 and G3616 Engines
Crankshaft Rear Gear - Remove and Install
G3612 and G3616 Engines
Crankshaft Main Bearings - Remove
G3612 and G3616 Engines
Crankshaft Main Bearings - Install
G3612 and G3616 Engines
Crankshaft - Remove
G3612 and G3616 Engines
Crankshaft - Install
G3612 and G3616 Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}
1997/01/13
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Location Of Drain Plugs In Cylinder Block For Air Inlet Manifold
1993/10/01
New Torque Specification For The Bolts That Fasten The Rear Housing To The Cylinder Block{1151}
1994/01/01
Use Thread Lock On Bolts That Fasten Aftercooler Housing To Cylinder Block {1063}
1994/09/01
New Cylinder Head And Cylinder Liner Gasket Kits Available{1124,1100,1216}
1995/06/01
Main Bearing Cap Installation Procedure{1203}
1995/06/01
New Crankshaft Main Bearing Installation Procedure{1203}
1995/08/01
New Main Bearing Provides Improved Oil Distribution {1203}
1996/01/17
New Technique To Remove Cylinder Head From Cylinder Block{1101,1201}
1996/07/22
New Cylinder Head Group Used In Landfill Applications And In 11:1 Compression Ratio Engines{1100,1103,1105}
1996/11/01
Guidelines For Reusability Of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, And Connecting Rod Cap Bolts And Nuts{1100,1218,1230}
1997/01/22
Procedure For Disassembly And Assembly Of The Pressure Relief Valve{1233}
1997/09/15
New Cylinder Block Group And New Rear Gear Group Used{1201,1206,1237}
1998/06/01
New Main Bearing Studs With Oversize Thread Available {1224}
1998/07/01
New Main Bearing Used {1203}
1998/08/01
Improved 128-5113 Thread Repair Insert Available For Cylinder Blocks With Damaged Stud Threads {1201}
1998/11/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Disassembly And Assembly Of Main Bearings For Journals Without Oil Holes {1203}
2000/01/01
The 151-7417 Engine Liner Hone Is Available {1216}
2002/05/01
207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/05
Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
2009/06/01
Using the Detonation Detection System to Troubleshoot Mechanical Problems in G3600 Engines {1223, 1559}
2010/10/08
Operation and Maintenance Manual
Cylinder Pressure - Measure/Record
G3612 and G3616 Engines
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Installation of the 422-9537 Repair Kit {1233}
Installation of the 422-9537 Repair Kit {1233}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Cylinder Block And Cylinder Liner Pitting
Cylinder Block And Cylinder Liner Pitting
G3600 Cylinder Liner Cracking
G3600 Cylinder Liner Cracking
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Specifications
Cylinder Liner
G3612 and G3616 Engines
Piston and Rings
G3612 and G3616 Engines
Cylinder Block
G3612 and G3616 Engines
Connecting Rod
G3612 and G3616 Engines
Service Letter-China
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Service Letter-Asia
Systems Operation
Basic Block
G3612 and G3616 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
Reuse and Salvage for C-280 & 3600 Engine Cylinder Blocks {1201}
Reuse and Salvage for C-280 & 3600 Engine Cylinder Blocks {1201}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Disassembly and Assembly
Crankcase Explosion Relief Valve - Remove and Install
G3612 and G3616 Engines
Camshaft Bearings - Remove
G3612 and G3616 Engines
Camshaft Bearings - Install
G3612 and G3616 Engines
Crankshaft Rear Seal - Remove
G3612 and G3616 Engines
Crankshaft Rear Seal - Install
G3612 and G3616 Engines
Piston Cooling Jets - Remove and Install
G3612 and G3616 Engines
Cylinder Liner - Remove
G3612 and G3616 Engines
Cylinder Liner - Install
G3612 and G3616 Engines
Crankshaft Main Bearings - Remove
G3612 and G3616 Engines
Crankshaft Main Bearings - Install
G3612 and G3616 Engines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27
Engine News
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Stud Installation
1993/01/01
Prechamber Rust Removal
1993/07/01
New 9U-7511 Spark Plug Seat Cleaner And 9U-7516 Spark Plug Gauge Available{1555,1100}
1994/05/01
New Valve (Gas Admission) Has Chrome Plated Valve Stem{1100,1250}
1994/08/01
New Prechamber Assembly Used In Prechamber Group; New Specifications For Prechamber Group {1106}
1994/10/01
New Cylinder Head Group Has New Stronger Exhaust Valves{1105}
1994/11/01
New Stainless Steel Gaskets Used In Prechamber Group {1106}
1995/04/01
Valve Stem Projection Measuring Tools Available{0760,0767,1105}
1995/06/01
New Stainless Steel Prechamber Gaskets Not Affected By Cooling System Cleaner{1106,1350}
1995/06/01
New Cylinder Head And Cylinder Liner Gasket Kits Available{1124,1100,1216}
1995/06/01
New Check Valve Used In Prechamber Groups{1106,1250}
1995/11/20
New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}
1996/03/19
Remanufactured Cylinder Head Groups Available{1100}
1996/04/15
Improvements To Check Valve Within Prechamber Group Reduce Maintenance Schedule{1106}
1996/06/12
New Technique To Remove Cylinder Head From Cylinder Block{1101,1201}
1996/07/22
New Rotocoil Assembly Used In Valve Rocker Arm Groups {1109}
1996/09/23
Cylinder Heads Are Serialized{1101}
1996/10/01
New Cylinder Head Group Used In Landfill Applications And In 11:1 Compression Ratio Engines{1100,1103,1105}
1996/11/01
Stronger Bolt Used In Prechamber Group{1106}
1996/12/18
Guidelines For Reusability Of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, And Connecting Rod Cap Bolts And Nuts{1100,1218,1230}
1997/01/22
Improved Combustion Gasket Provides Better Control Of Combustion Chamber Crevice Volume{1124}
1997/05/01
Installation Procedure For Cylinder Head Studs {1100}
1997/08/01
Spark Plug Seat Cleaner Recommended For Use On Cylinder Heads{1555}
1997/10/10
Water Cooled Pre-Chamber Insert Available{1103}
1997/10/10
New Exhaust Valve Used In Cylinder Head Groups{1105}
1998/03/01
New Gaskets In Prechamber Groups Help Prevent Coolant Leaks{1106}
1998/04/01
Troubleshooting Combustion Chamber Coolant Leaks In G3600 Engines{1106,1350}
1998/05/01
New Exhaust Valves Have Improved Resistance To Radial Cracking {1105}
1998/09/01
New Valve Recession Tool Kit Available {0600,1105,1121}
1998/11/01
New Gas Admission Valve (GAV) Lash Tool Available {0600,1105,1121}
1998/11/01
New Prechamber Group Used {1106}
1998/11/01
New Exhaust Valve Lash Setting For G3600 Engines In Landfill Applications{1105}
1998/12/01
Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1999/01/01
Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface Inspection{1101}
1999/02/01
New Prechamber Assembly And Ignition Body Assembly In Prechamber Groups{1106}
1999/02/01
New Gaskets And Ignition Body Assembly Used In Prechamber Groups To Improve Sealing{1106}
1999/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Basic Cylinder Head Groups Include Premachined Valve Seat Inserts For Improved Reliability {1100}
2000/01/01
Oil Mister Pump And Lines Groups No Longer Used {1105, 1319}
2000/04/01
A New Taperlock Stud Is Used To Fasten The Cylinder Heads To The Cylinder Block {1100}
2001/01/01
New Cylinder Head Groups Will Provide Improved Reliability {1100, 1103, 1104}
2001/02/01
The New 187-6273 Machining Tool Group (G3600 Prechamber Assembly) Is Available {1106}
2001/02/01
Repair Procedure for the Threads in a Cylinder Head Casting that were Damaged by a Manual Valve Group (Kiene Valve) {1100}
2001/09/01
Correction To Disassembly and Assembly Module, SENR5535-04, "G3612 and G3616 Engines" , "Cylinder Head - Remove" {1100}
2002/02/01
New Tools Are Available For Rebuilding The Cylinder Head {1100}
2002/04/01
New Tightening Procedure For The Bolts That Fasten The Prechamber Groups To The Cylinder Head {1106}
2002/05/01
A New Check Valve Assembly is Used in the Prechamber Groups {1106}
2005/12/19
New Cylinder Head Groups and New Prechamber Groups With 1/2-13 Standard Bolts Are Available {1100}
2003/03/01
A New Spark Plug Is Available For Use In Applications That Use Bio-Gas Fuel {1555}
2003/02/01
Guidelines for Modifying the Cylinder Head and the Prechamber Assembly for 1/2 Inch Bolts {1101}
2003/06/01
Improved Spacer for the Prechamber Group {1106}
2005/07/04
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correction to Disassembly and Assembly, "Cylinder Head - Remove" and "Cylinder Head - Install" {1100, 1100}
2005/11/07
207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/05
The Stud Tensioner Tool Groups for 3600, C280, and G3600 Engines Require Different Hydraulic Pressures {0703, 0705, 1100, 1202, 1203}
2006/07/03
A New Exhaust Valve is Used {1100, 1105}
2008/04/14
Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
2009/06/01
A New Prechamber and Gasket Are Available for Certain G3600 Engines {1106}
2013/06/11
Cat<SUP>&reg;</SUP> Reman Now Offers New Prechamber Kits for Certain G3600 Engines {1106}
2014/09/26
A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}
A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3612 and G3616 Engines
Gas Admission Valve Seals - Inspect/Replace
G3612 and G3616 Engines
Gas Admission Valve - Recondition
G3612 and G3616 Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-Australia
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-CFEL
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-CSARL
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-Americas
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-Brazil
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Service Letter-Truck/Ag/Marine
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Technical Information Bulletin
Lubricant For Gas Engines
Lubricant For Gas Engines
Exhaust Valve Recession
Exhaust Valve Recession
10.5:1 And 11:1 Compression Ratio Cylinder Head Recommendations
10.5:1 And 11:1 Compression Ratio Cylinder Head Recommendations
Specifications
Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
G3612 and G3616 Engines
Inlet Valve Lubrication Metering Pump
G3612 and G3616 Engines
Tool Operating Manual
126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}
126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-Asia
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CAT REMAN ANNOUNCES THE RELEASE OF A FUEL CHECK VALVE FOR GAS 3600 APPLICATIONS
CAT REMAN ANNOUNCES THE RELEASE OF A FUEL CHECK VALVE FOR GAS 3600 APPLICATIONS
Service Letter-APD
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
Product Support Program For Replacing The Prechamber On Certain G3612 And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE HIGH COMPRESSION RATIO (HCR) EXHAUST VALVE RECESSION ON CERTAIN G3600 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Disassembly and Assembly
Prechamber Ignition Body - Remove
G3612 and G3616 Engines
Gas Admission Valve - Remove
G3612 and G3616 Engines
Gas Admission Valve - Install
G3612 and G3616 Engines
Gas Admission Valve - Disassemble
G3612 and G3616 Engines
Gas Admission Valve - Assemble
G3612 and G3616 Engines
Prechamber Check Valve - Remove and Install
G3612 and G3616 Engines
Cylinder Head - Assemble
G3612 and G3616 Engines
Cylinder Head - Disassemble
G3612 and G3616 Engines
Cylinder Head - Remove
G3612 and G3616 Engines
Cylinder Head - Install
G3612 and G3616 Engines
Prechamber Ignition Body - Install
G3612 and G3616 Engines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Rocker Arm Assemblies Have New Inserts And Buttons{1123}
1990/04/23
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Prechamber Rust Removal{1106}
1993/07/19
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27
Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}
1998/03/23
Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}
1998/03/23
Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface {1101}
1998/08/17
Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1998/11/23
Engine News
An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237, 5569}
2003/08/01
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3612 and G3616 Engines
Technical Information Bulletin
Damper Fluid Kits Are not Available Outside of the United States {1205}
Damper Fluid Kits Are not Available Outside of the United States {1205}
Specifications
Vibration Damper - Dual
G3612 and G3616 Engines
Vibration Damper - Single
G3612 and G3616 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES
REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES
Disassembly and Assembly
Vibration Damper - Remove
G3612 and G3616 Engines
Vibration Damper - Install
G3612 and G3616 Engines
Vibration Damper - Remove
G3612 and G3616 Engines
Vibration Damper - Install
G3612 and G3616 Engines
Vibration Damper - Disassemble
G3612 and G3616 Engines
Vibration Damper - Assemble
G3612 and G3616 Engines
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Engine News
New Components In Accessory Drive Group And Alternator Drive Group Provide Improved Serviceability And Help Prevent Oil Leaks{1207,1425}
1996/06/12
Specifications
Accessory Drive
G3612 and G3616 Engines
Engine News
New Components In Accessory Drive Group And Alternator Drive Group Provide Improved Serviceability And Help Prevent Oil Leaks{1207,1425}
1996/06/12
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Additional Clamps Added To Air Cleaner Adapter Group For G3600 Engines {5502}
1994/10/01
Specifications
Flywheel
G3612 and G3616 Engines
Gear Group (Rear)
G3612 and G3616 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel and Coupling Guards - Remove and Install
G3612 and G3616 Engines
Flywheel and Ring Gear - Remove and Install
G3612 and G3616 Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
New Cylinder Block Group And New Rear Gear Group Used{1201,1206,1237}
1998/06/01
New Gear Assemblies Are Used In The Front Gear Group {1206}
2001/05/01
Specifications
Gear Group (Front)
G3612 and G3616 Engines
Gear Group (Rear)
G3612 and G3616 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Idler Gears (Front) - Remove
G3612 and G3616 Engines
Idler Gears (Front) - Install
G3612 and G3616 Engines
Idler Gears (Rear) - Remove
G3612 and G3616 Engines
Idler Gears (Rear) - Install
G3612 and G3616 Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Engine News
New Alternator Guard Used In Belt Guard Groups
1993/03/01
Service Magazine
New Alternator Guard Used In Belt Guard Groups{7168}
1993/03/08
Engine News
New Torque Specification For The Bolts That Fasten The Rear Housing To The Cylinder Block{1151}
1994/01/01
Additional Clamps Added To Air Cleaner Adapter Group For G3600 Engines {5502}
1994/10/01
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Specifications
Housing (Front)
G3612 and G3616 Engines
Crankshaft Seals
G3612 and G3616 Engines
Disassembly and Assembly
Housing (Front) - Remove
G3612 and G3616 Engines
Housing (Front) - Install
G3612 and G3616 Engines
Engine News
Lifting Brackets and Hardware are Available {1122}
2004/12/01
Service Letter-NACD
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Engine Lifting Bracket
G3612 and G3616 Engines
Service Letter-China
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Engine Lifting Bracket - Remove and Install
G3612 and G3616 Engines
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
New Torque Specification For The Bolts That Fasten The Rear Housing To The Cylinder Block{1151}
1994/01/01
New Front Crankshaft Adapters and Wear Sleeve Used{1160}
1994/12/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Systems Operation
Basic Block
G3612 and G3616 Engines
Testing and Adjusting
Basic Block
G3612 and G3616 Engines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Technical Information Bulletin
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Operation and Maintenance Manual
Engine Mounts - Check
G3612 and G3616 Engines
Special Instruction
Adding Additional Engine Mounting Groups{1152}
Adding Additional Engine Mounting Groups{1152}
Engine News
New Stronger Oil Pans Used
1993/07/01
Improved, Stronger Oil Pan Available{1302}
1997/04/01
A New Oil Pan Is Used on Certain G3600 and C280 Engines {1302}
2015/05/29
Reuse And Salvage Guidelines
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Disassembly and Assembly
Engine Oil Pan - Remove
G3612 and G3616 Engines
Engine Oil Pan - Install
G3612 and G3616 Engines
Engine Oil Pan - Disassemble
G3612 and G3616 Engines
Engine Oil Pan - Assemble
G3612 and G3616 Engines
Engine News
New Crankshaft Main Bearing Installation Procedure{1203}
1995/08/01
New Main Bearing Provides Improved Oil Distribution {1203}
1996/01/17
Connecting Rod Bearing Part Numbers {1203,1219,1230}
1997/08/01
New Main Bearing Used {1203}
1998/08/01
An Improved Taperlock Stud Is Used To Fasten The Main Bearing Cap To The Cylinder Block {1224}
2001/10/01
A Process for Product Support has been Established for the Custom Parts that are part of the 3500 Family and 3600 Family of Engine Packages {1000, 1800}
2001/10/01
Procedure For Cleaning Engine Bolts {1000}
2002/03/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Guidelines For Reusability Of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, And Connecting Rod Cap Bolts And Nuts{1100,1218,1230}
1997/01/22
Updated Connecting Rod Bolt Tightening Procedure{1218}
1997/07/01
Connecting Rod Bearing Part Numbers {1203,1219,1230}
1997/08/01
Do Not Reuse Connecting Rod Nuts On G3600 Engines{1218}
1999/05/01
New Connecting Rod Bolt Tightening Procedure{1218}
1999/09/01
Corrections To Disassembly and Assembly Modules, G3600 Engines , "Pistons and Connecting Rods - Install" {1225}
2000/05/01
Corrections To Specifications Modules, G3600 Engines , "Piston and Rings" {1214, 1215}
2000/05/01
New Tightening Procedure for Connecting Rod Bolts in 3600, G3600, and C280 Engines {1218, 1225}
2004/09/01
Corrections To Disassembly and Assembly Module, SENR3594-04 , "Piston And Connecting Rods - Install" and Disassembly and Assembly Module, SENR5535-04 , "Piston and Connecting Rods - Install" {1225}
2001/05/01
New Connecting Rods And A New Connecting Rod Bearing Are Used {1218, 1230}
2001/07/01
New Piston Assemblies Are Used {1214}
2001/10/01
New Connecting Rod Assemblies {1218}
2006/06/26
A New Connecting Rod Nut is Used {1218}
2003/01/01
A New Connecting Rod Bearing is Used for High Compression Ratio Generator Set Engines {1219}
2004/07/01
Reusability of Connecting Rods {1218}
2004/07/01
New Look for the Connecting Rod Bolt {1218}
2006/03/06
The Heavy Pistons are Cancelled {1214, 1225}
2008/02/11
Replace the Connecting Rod Bearings According to the Operation and Maintenance Manual {1219, 1225}
2008/09/08
Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
2009/06/01
A New Connecting Rod Assembly Is Being Used In The G3600 Engines With A Compression Ratio of 9.2:1 {1218}
2009/08/10
New Connecting Rod Bolts Are Used for 3600, G3600, and C280 Engines {1225}
2011/05/31
Proper Installation of Connecting Rod Bearings for G3600, 3600, and C280 Engines {1225}
2011/04/04
Installing Connecting Rod Bearings in G3600, 3600 and C280 Engines {1225}
2013/06/06
Tri Metal Rod Bearing Is Released for Service Replacement for all 3600, C280, and G3600 Engines {1225}
2014/06/20
A New Torque Procedure for Connecting Rod Bolts Is Now Used on 3600, G3600, and C280 Engines {1218}
2015/05/29
A New Connecting Rod Bolt is Used on 3600, G3600, and C280 Engines {1218}
2015/04/24
New Connecting Rod Assemblies Used In 3600, G3600, and C280 Engines {0701, 1218}
New Connecting Rod Assemblies Used In 3600, G3600, and C280 Engines {0701, 1218}
An Improved Piston Pin Retainer Is Used Now in C280, 3600, G3600 Engines {1214}
An Improved Piston Pin Retainer Is Used Now in C280, 3600, G3600 Engines {1214}
The Connecting Rod Bolt Has a New Look for All 3600, C280, and G3600 Engines {1218}
The Connecting Rod Bolt Has a New Look for All 3600, C280, and G3600 Engines {1218}
New Connecting Rod Groups Are Now Used for All 3600, C280, and G3600 Engines {1218, 1225}
New Connecting Rod Groups Are Now Used for All 3600, C280, and G3600 Engines {1218, 1225}
Operation and Maintenance Manual
Connecting Rod Bearings - Inspect/Replace
G3612 and G3616 Engines
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using the DataMan 100 Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
Using the DataMan 100 Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Instructions for Using the 438-3338 Torque Tool Gp on Connecting Rod Bolts for All 3600, G3600, and C280 Engines{1218, 7553}
Instructions for Using the 438-3338 Torque Tool Gp on Connecting Rod Bolts for All 3600, G3600, and C280 Engines{1218, 7553}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
The Connecting Rod Bearings Need To Be Replaced In Certain G3606, G3608, G3612, And G3616 Engines
The Connecting Rod Bearings Need To Be Replaced In Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
The Connecting Rod Bearings Need To Be Replaced In Certain G3606, G3608, G3612, And G3616 Engines
The Connecting Rod Bearings Need To Be Replaced In Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
The Connecting Rod Bearings Need To Be Replaced In Certain G3606, G3608, G3612, And G3616 Engines
The Connecting Rod Bearings Need To Be Replaced In Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Technical Information Bulletin
Cylinder Block And Cylinder Liner Pitting
Cylinder Block And Cylinder Liner Pitting
Installation Of The Top And The Intermediate Piston Rings On G3600 Engine Pistons
Installation Of The Top And The Intermediate Piston Rings On G3600 Engine Pistons
G3600 Cylinder Liner Cracking
G3600 Cylinder Liner Cracking
Piston Seizures in some G3600 Engines {1225}
Piston Seizures in some G3600 Engines {1225}
Failure of Some Bearings In 3500 and G3600 Engines{1225}
Failure of Some Bearings In 3500 and G3600 Engines{1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
Specifications
Piston and Rings
G3612 and G3616 Engines
Connecting Rod
G3612 and G3616 Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CONNECTING ROD BOLTS ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Disassembly and Assembly
Piston and Connecting Rods - Install
G3612 and G3616 Engines
Piston and Connecting Rods - Remove
G3612 and G3616 Engines
Piston and Connecting Rods - Install - Hydraulic Tensioned Rod Bolts
G3612 and G3616 Engines
Piston and Connecting Rods - Remove - Hydraulic Tensioned Rod Bolts
G3612 and G3616 Engines
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3612 and G3616 Engines
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
A New Oil Pump for the Hydrax System is Used {1716, 5073}
2006/08/07
An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237, 5569}
2003/08/01
An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237}
An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237}
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Engine Timing Indicator Group Available
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}
1996/03/19
Use 146-2726 Maintenance Tool Group To Perform Routine Maintenance{1000,1000,0701}
1999/01/01
207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/05
The Stud Tensioner Tool Groups for 3600, C280, and G3600 Engines Require Different Hydraulic Pressures {0703, 0705, 1100, 1202, 1203}
2006/07/03
New Connecting Rod Assemblies Used In 3600, G3600, and C280 Engines {0701, 1218}
New Connecting Rod Assemblies Used In 3600, G3600, and C280 Engines {0701, 1218}
Special Instruction
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}
126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}
1998/03/23
Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}
1998/03/23
Use 146-2726 Maintenance Tool Group To Perform Routine Maintenance {1000,1000,0701}
1998/08/17
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
New Alternator Guard Used In Belt Guard Groups
1993/03/01
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
G3612 and G3616 Engines
Specifications
Belt Tension Chart
G3612 and G3616 Engines
Testing and Adjusting
Belt Tension Chart
G3612 and G3616 Engines
Service Magazine
New Alternator Guard Used In Belt Guard Groups{7168}
1993/03/08
Engine News
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Rocker Arm Assemblies Have New Inserts And Buttons
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Valve (Gas Admission) Has Chrome Plated Valve Stem{1100,1250}
1994/08/01
New Value For Gas Admission Valve (GAV) Lash Setting Included In All G3600 Engines{1102}
1995/10/01
New Intake Valve Lash Setting {1105}
1996/01/17
New Rotocoil Assembly Used In Valve Rocker Arm Groups {1109}
1996/09/23
New Torque Specification For Some Bolts In Valve Mechanism Groups{1102}
1996/11/01
New Torque Specification For Some Bolts In Valve Mechanism Group {1102,1123}
1997/08/01
Gas Admission Valve (GAV) Changed In Order To Provide For The Use Of Dial Indicator Settings{1102}
1997/09/15
Water Cooled Pre-Chamber Insert Available{1103}
1997/10/10
New Exhaust Valve Used In Cylinder Head Groups{1105}
1998/03/01
New Exhaust Valves Have Improved Resistance To Radial Cracking {1105}
1998/09/01
New Gas Admission Valve (GAV) Lash Tool Available {0600,1105,1121}
1998/11/01
New Exhaust Valve Lash Setting For G3600 Engines In Landfill Applications{1105}
1998/12/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
A New Valve Adjusting Screw Is Available {1123}
2002/06/01
Use the Correct Valve Lash Setting {1105}
2003/09/01
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}
A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
G3612 and G3616 Engines
Engine Valve Lash - Inspect/Adjust
G3612 and G3616 Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-Australia
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-CFEL
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-CSARL
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-Americas
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Technical Information Bulletin
Exhaust Valve Recession
Exhaust Valve Recession
Specifications
Valve Mechanism
G3612 and G3616 Engines
Tool Operating Manual
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
Service Letter-China
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-Asia
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Service Letter-APD
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Disassembly and Assembly
Valve Cover Base - Remove and Install
G3612 and G3616 Engines
Valve Mechanism - Remove
G3612 and G3616 Engines
Valve Mechanism - Install
G3612 and G3616 Engines
Rocker Arm - Remove
G3612 and G3616 Engines
Rocker Arm - Install
G3612 and G3616 Engines
Valve Lifter - Remove
G3612 and G3616 Engines
Valve Lifter - Install
G3612 and G3616 Engines
Valve Lifter - Disassemble
G3612 and G3616 Engines
Valve Lifter - Assemble
G3612 and G3616 Engines
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Rocker Arm Assemblies Have New Inserts And Buttons{1123}
1990/04/23
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Engine News
New Torque Specification For The Bolts That Fasten The Rear Housing To The Cylinder Block{1151}
1994/01/01
Specifications
Housing (Rear)
G3612 and G3616 Engines
Housing (Rear)
G3612 and G3616 Engines
Disassembly and Assembly
Housing (Rear) - Remove
G3612 and G3616 Engines
Housing (Rear) - Install
G3612 and G3616 Engines
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Engine News
Removal Of Shipping Plug In G3600 Alternator Drive Groups, And Insertion Of Plug In The Alternator Drive Shaft{1405}
1995/10/01
New Components In Accessory Drive Group And Alternator Drive Group Provide Improved Serviceability And Help Prevent Oil Leaks{1207,1425}
1996/06/12
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.