AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

296-6249 DRIVE GP-SWING -WITH MOTOR, RH S/N TAH1-UP; RAN1-UP PART OF 227-6042 POWER TRAIN AR 349D2 EXCAVATOR


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP

EXCAVATOR 349D2 EXCAVATOR RAN
 349D2 & 349D2 L Excavators RAN00001-UP (MACHINE) POWERED BY C13 Engine SEBP7439 349D2 RAN   (2014)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-AUXILIARY PUMP
234-4620 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
295-9441 DRIVE GP-AUXILIARY PUMP
DRIVE GP-SWING
296-6249 DRIVE GP-SWING
DRIVE GP-SWING
296-6250 DRIVE GP-SWING
DRIVE GP-SWING
296-6252 DRIVE GP-SWING
DRIVE GP-SWING
296-6253 DRIVE GP-SWING
 

#SEBP74390480
 

296-6249: DRIVE GP-SWING

296-6249 DRIVE GP-SWING -WITH MOTOR, RH
S/N TAH1-UP; RAN1-UP
PART OF 227-6042 POWER TRAIN AR
i04562446 SEBP7439
2966249 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4505 Y [1] MOTOR & MTG GP-SWING  
2. 296-6250 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74390481
 

296-6250: DRIVE GP-SWING

296-6250 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N TAH1-UP; RAN1-UP
PART OF 296-6249 DRIVE GP-SWING
i04562538 SEBP7439
2966250 DRIVE GP-SWING Parts scheme 2966250 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
3. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
4. 4I-7467 [1] GEAR-RING (72-TEETH)  
5. 6V-7238 [1] VALVE-SHUTOFF  
6. 7I-7728 [1] CARRIER-PLANETARY  
7. 7Y-0597 [1] SPACER-SPECIAL  
8. 7Y-1238 [1] CARRIER  
9. 093-1730 [2] RING-RETAINING  
10. 094-1509 [4] SHAFT-PLANETARY  
11. 094-1528 [8] WASHER (53X84X1-MM THK)  
12. 095-1806 [1] BEARING-ROLLER  
13. 096-2653 [1] RING-RETAINING  
14. 096-4339 [1] BEARING AS-ROLLER  
15. 110-7216 [1] GEAR-SUN (24-TEETH)  
16. 114-1383 [4] SHAFT-PLANETARY  
17. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
18. 114-1399 [1] PIPE-GAUGE  
19. 114-1401 [1] COVER-HOUSING  
20. 114-1403 [1] CAGE  
21. 136-2802 [2] CONNECTOR  
22. 136-2803 [2] CLIP  
23. 169-5534 [1] HOUSING  
24. 169-5535 [1] GEAR-SUN (20-TEETH)  
25. 227-6108 [1] SHAFT-PINION  
26. 227-6215 [1] BOSS (1/4-18-THD)  
27. 296-6251 I [1] HOSE AS  
28. 093-1731 [1] RING-RETAINING  
29. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
30. 199-4582 [4] BEARING AS  
31. 095-0886 [4] PIN-SPRING  
32. 509-6676 [4] PIN-SPRING  
33. 135-9044 [2] SEAL-LIP TYPE  
34. 3K-0360 [1] SEAL-O-RING  
35. 5P-2235 [1] SEAL-O-RING  
36. 191-2513 [8] BEARING AS-ROLLER  
37. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
38. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
43. 8T-6385 M [16] BOLT (M16X2X180-MM)  
44. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP74390482
 

296-6252: DRIVE GP-SWING

296-6252 DRIVE GP-SWING -WITH MOTOR, LH
S/N TAH1-UP; RAN1-UP
PART OF 227-6042 POWER TRAIN AR
i04562584 SEBP7439
2966252 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4505 Y [1] MOTOR & MTG GP-SWING  
2. 296-6253 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74390483
 

296-6253: DRIVE GP-SWING

296-6253 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N TAH1-UP; RAN1-UP
PART OF 296-6252 DRIVE GP-SWING
i04562903 SEBP7439
2966253 DRIVE GP-SWING Parts scheme 2966253 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
3. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
4. 4I-7467 [1] GEAR-RING (72-TEETH)  
5. 6V-7238 [1] VALVE-SHUTOFF  
6. 7I-7728 [1] CARRIER-PLANETARY  
7. 7Y-0597 [1] SPACER-SPECIAL  
8. 7Y-1238 [1] CARRIER  
9. 093-1730 [2] RING-RETAINING  
10. 094-1509 [4] SHAFT-PLANETARY  
11. 094-1528 [8] WASHER (53X84X1-MM THK)  
12. 095-1806 [1] BEARING-ROLLER  
13. 096-2653 [1] RING-RETAINING  
14. 096-4339 [1] BEARING AS-ROLLER  
15. 110-7216 [1] GEAR-SUN (24-TEETH)  
16. 114-1383 [4] SHAFT-PLANETARY  
17. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
18. 114-1399 [1] PIPE-GAUGE  
19. 114-1401 [1] COVER-HOUSING  
20. 114-1403 [1] CAGE  
21. 136-2802 [2] CONNECTOR  
22. 136-2803 [2] CLIP  
23. 169-5534 [1] HOUSING  
24. 169-5535 [1] GEAR-SUN (20-TEETH)  
25. 227-6108 [1] SHAFT-PINION  
26. 227-6215 [1] BOSS (1/4-18-THD)  
27. 296-6251 I [1] HOSE AS  
28. 093-1731 [1] RING-RETAINING  
29. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
30. 199-4582 [4] BEARING AS  
31. 095-0886 [4] PIN-SPRING  
32. 509-6676 [4] PIN-SPRING  
33. 135-9044 [2] SEAL-LIP TYPE  
34. 3K-0360 [1] SEAL-O-RING  
35. 5P-2235 [1] SEAL-O-RING  
36. 191-2513 [8] BEARING AS-ROLLER  
37. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
38. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
43. 8T-6385 M [16] BOLT (M16X2X180-MM)  
44. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP74390484
 

418-7155: DRIVE GP-SWING

418-7155 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N TAH1-UP; RAN1-UP
PART OF 475-1175 DRIVE GP-SWING
ALSO AN ATTACHMENT
i06619742 SEBP7439
4187155 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 7Y-0597 [1] SPACER-SPECIAL  
4. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
5. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
6. 114-1399 [1] PIPE-GAUGE  
7. 114-1403 [1] CAGE  
8. 227-6108 [1] SHAFT-PINION  
9. 227-6215 [1] BOSS (1/4-18-THD)  
10. 296-6268 [3] BEARING AS-ROLLER  
11. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
12. 418-7161 [1] GEAR-SUN (23-TEETH)  
13. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
14. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
15. 418-7164 [1] GEAR-RING (69-TEETH)  
16. 418-7167 [4] SHAFT  
17. 418-7232 [1] COVER-HOUSING  
18. 418-7233 [8] BEARING AS-ROLLER  
19. 418-7234 [1] CARRIER AS  
20. 418-7235 [1] CARRIER-PLANETARY  
21. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
22. 422-4054 [3] RING-RETAINING  
23. 451-2182 [52] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
25. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
26. 456-0784 [1] HOUSING  
27. 486-7828 [1] HOSE AS  
28. 093-1730 [2] RING-RETAINING  
29. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
30. 509-6676 [4] PIN-SPRING  
31. 095-1806 [1] BEARING-ROLLER  
32. 096-2653 [1] RING-RETAINING  
33. 096-4339 [1] BEARING AS-ROLLER  
34. 135-9044 [2] SEAL-LIP TYPE  
35. 136-2803 [2] CLIP  
36. 3K-0360 [1] SEAL-O-RING  
37. 5P-2235 [1] SEAL-O-RING  
38. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
39. 8T-4244 M [1] NUT (M12X1.75-THD)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP74390485
 

470-0474: DRIVE GP-SWING

470-0474 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N TAH1-UP; RAN1-UP
PART OF 475-1176 DRIVE GP-SWING
ALSO AN ATTACHMENT
i06619758 SEBP7439
4700474 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 7Y-0597 [1] SPACER-SPECIAL  
4. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
5. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
6. 114-1399 [1] PIPE-GAUGE  
7. 114-1403 [1] CAGE  
8. 227-6108 [1] SHAFT-PINION  
9. 227-6215 [1] BOSS (1/4-18-THD)  
10. 296-6268 [3] BEARING AS-ROLLER  
11. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
12. 418-7161 [1] GEAR-SUN (23-TEETH)  
13. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
14. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
15. 418-7164 [1] GEAR-RING (69-TEETH)  
16. 418-7167 [4] SHAFT  
17. 418-7232 [1] COVER-HOUSING  
18. 418-7233 [8] BEARING AS-ROLLER  
19. 418-7234 [1] CARRIER AS  
20. 418-7235 [1] CARRIER-PLANETARY  
21. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
22. 422-4054 [3] RING-RETAINING  
23. 451-2182 [52] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
25. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
26. 456-0784 [1] HOUSING  
27. 486-7828 [1] HOSE AS  
28. 093-1730 [2] RING-RETAINING  
29. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
30. 095-0891 [4] PIN-SPRING  
31. 095-1806 [1] BEARING-ROLLER  
32. 096-2653 [1] RING-RETAINING  
33. 096-4339 [1] BEARING AS-ROLLER  
34. 135-9044 [2] SEAL-LIP TYPE  
35. 136-2803 [2] CLIP  
36. 3K-0360 [1] SEAL-O-RING  
37. 5P-2235 [1] SEAL-O-RING  
38. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
39. 8T-4244 M [1] NUT (M12X1.75-THD)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP74390486
 

475-1175: DRIVE GP-SWING

475-1175 DRIVE GP-SWING -WITH MOTOR, LH
S/N TAH1-UP; RAN1-UP
PART OF 227-6042, 539-0890 POWER TRAIN AR
ALSO AN ATTACHMENT
i06619739 SEBP7439
4751175 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 418-7155 Y [1] DRIVE GP-SWING  
2. 486-5235 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74390487
 

475-1176: DRIVE GP-SWING

475-1176 DRIVE GP-SWING -WITH MOTOR, RH
S/N TAH1-UP; RAN1-UP
PART OF 227-6042, 539-0890 POWER TRAIN AR
ALSO AN ATTACHMENT
i06619756 SEBP7439
4751176 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 470-0474 Y [1] DRIVE GP-SWING  
2. 486-5235 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74390488
 

227-6050: FASTENER GP-SWING & FINAL DR

227-6050 FASTENER GP-SWING & FINAL DR
S/N TAH1-UP; RAN1-UP
PART OF 227-6042, 539-0890 POWER TRAIN AR
ALSO AN ATTACHMENT
i04562438 SEBP7439
2276050 FASTENER GP-SWING & FINAL DR Parts scheme 2276050 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [4] CORK  
2. 5D-1026 [2] CLAMP-BAND  
3. 096-4755 [4] PIN  
4. 509-7906 M [20] BOLT (M24X3X70-MM)  
5. 6V-8237 [60] WASHER (26X44X4-MM THK)  
6. 509-7907 M [40] BOLT-HEAD (M24X3X80-MM)  
7. 5P-0767 E HOSE (130-CM EACH)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP74390489
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N TAH1-UP; RAN1-UP
PART OF 418-7193, 446-9586, 460-0423 TANK & FILTER GP-HYDRAULIC
ALSO AN ATTACHMENT
i02998214 SEBP7439
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 C [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 C [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Operation and Maintenance Manual
Swing Drive Oil Level - Check
345D, 349D and 349D2 Excavators
Swing Drive Oil Sample - Obtain
345D, 349D and 349D2 Excavators
Swing Drive Oil - Change
345D, 349D and 349D2 Excavators
Special Instruction
Installation of the <NOBR>469-5771</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 3108, 5057, 5059, 5063, 5070, 5073, 5459, 7405, 7553, 7557}
Installation of the 469-5771 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 3108, 5057, 5059, 5063, 5070, 5073, 5459, 7405, 7553, 7557}
Installation of the 225-4515 Auxiliary Pump Drive Gp on Certain Hydraulic Excavators{3108}
Installation of the 225-4515 Auxiliary Pump Drive Gp on Certain Hydraulic Excavators{3108}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fasteners
345D, 349D and 349D2 Excavator Machine System Specifications
Auxiliary Pump Drive and Mounting
345D, 349D and 349D2 Excavator Machine System Specifications
Swing Drive - Left Swing Drive and Right Swing Drive
345D, 349D and 349D2 Excavator Machine System Specifications
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
Service Letter-Asia
Systems Operation
Swing Drive
345D, 349D and 349D2 Excavators Hydraulic System
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
Disassembly and Assembly
Swing Motor - Disassemble
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Swing Motor - Assemble
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Swing Drive - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Swing Drive - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Swing Drive - Disassemble
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Swing Drive - Assemble
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Pump Drive Group - Assemble - Auxiliary
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Pump Drive Group - Disassemble - Auxiliary
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Pump Drive Group - Install - Auxiliary
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Pump Drive Group - Remove - Auxiliary
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Fan Pump - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Fan Pump - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Main Hydraulic Pump and Pump Drive Coupling - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Main Hydraulic Pump and Pump Drive Coupling - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Service Magazine
A New Swing Drive and Motor are Now Used On Certain Excavators and Mobile Hydraulic Power Units {5058, 5459}
A New Swing Drive and Motor are Now Used On Certain Excavators and Mobile Hydraulic Power Units {5058, 5459}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 349D2 :

DRIVE GP-AUXILIARY PUMP
295-9441 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
234-4620 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
225-4515 DRIVE GP-AUXILIARY PUMP
CYLINDER GP-STICK
513-3691 CYLINDER GP-STICK
CYLINDER GP-STICK
419-0071 CYLINDER GP-STICK
CYLINDER GP-STICK
370-6692 CYLINDER GP-STICK
CYLINDER GP-BUCKET
358-8503 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
DRIVE GP-SWING
296-6250 DRIVE GP-SWING
DRIVE GP-SWING
296-6252 DRIVE GP-SWING
DRIVE GP-SWING
296-6253 DRIVE GP-SWING
DRIVE GP-SWING
418-7155 DRIVE GP-SWING
DRIVE GP-SWING
470-0474 DRIVE GP-SWING
DRIVE GP-SWING
475-1175 DRIVE GP-SWING
DRIVE GP-SWING
475-1176 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
227-6050 FASTENER GP-SWING & FINAL DR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.