AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

362-5365 CYLINDER GP-BUCKET S/N HSM1-UP 200-MM (7.87-IN) BORE X 1451-MM (57.13-IN) STROKE PART OF 362-6004 CYLINDER & SEAL GP-BUCKET AN ATTACHMENT 390F L


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 390F L EXCAVATOR HSM
 390F L Excavator HSM00001-UP (MACHINE) POWERED BY C18 Engine SEBP7440 390F L HSM   (2014)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOOM
470-7141 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
362-4589 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
362-5365 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
363-9317 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
570-1989 CYLINDER GP-BUCKET
CYLINDER GP-COUNTERWEIGHT
155-9196 CYLINDER GP-COUNTERWEIGHT
 

#SEBP74400540
 

362-5365: CYLINDER GP-BUCKET

362-5365 CYLINDER GP-BUCKET
S/N HSM1-UP
200-MM (7.87-IN) BORE X 1451-MM (57.13-IN) STROKE
PART OF 362-6004 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i05738696 SEBP7440
3625365 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 362-4928 [1] CYLINDER AS-HYDRAULIC  
1A. 198-5529 BUSHING  
2. 361-3320 [1] ROD AS  
2A. 6E-0813 [1] BUSHING  
3. 424-2919 [1] HEAD  
4. 433-5662 [1] PISTON  
5. 147-5776 J [1] RING  
6. 147-5738 J [2] RING  
7. 8C-9179 J [1] SEAL AS  
8. 095-1731 J [1] SEAL-O-RING  
9. 4I-6330 J [1] RING-BACKUP  
10. 128-9261 [1] BUSHING  
11. 102-0786 [1] RING-RETAINING  
12. 367-3928 J [1] SEAL-BUFFER  
13. 367-3929 J [1] SEAL-U-CUP  
14. 147-5771 J [1] RING-BACKUP  
15. 165-9294 J [1] SEAL-LIP TYPE  
16. 9X-8399 [11] WASHER (33X56X6-MM THK)  
17. 177-9754 M [11] BOLT (M30X3.5X130-MM)  
18. 116-3513 M [1] LOCKNUT-NYLON (M105X2-THD)  
19. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
20. 8T-6757 [1] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  370-1940 J [1] KIT-SEAL (BUCKET)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP74400541
 

363-9317: CYLINDER GP-BUCKET

363-9317 CYLINDER GP-BUCKET
S/N HSM1-UP
200-MM (7.9-IN) BORE X 1451-MM (57.13-IN) STROKE
PART OF 364-9310 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i05748702 SEBP7440
3639317 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 363-9187 [1] CYLINDER AS-HYDRAULIC  
1A. 198-5529 [1] BUSHING  
2. 363-9214 [1] ROD AS  
2A. 6E-0813 [1] BUSHING  
3. 363-9311 [1] PISTON  
4. 147-5776 J [1] RING  
5. 147-5738 J [2] RING  
6. 6V-8223 M [1] SETSCREW-SOCKET (M10X1.5X16-MM)  
7. 424-2919 [1] HEAD  
8. 128-9261 [1] BUSHING  
9. 8C-9179 J [1] SEAL AS  
10. 4I-6330 J [1] RING-BACKUP  
11. 095-1731 J [1] SEAL-O-RING  
12. 102-0786 [1] RING-RETAINING  
13. 367-3929 J [1] SEAL-U-CUP  
14. 165-9294 J [1] SEAL-LIP TYPE  
15. 095-1280 M [2] SETSCREW-SOCKET (M16X2X20-MM)  
16. 9X-8399 [11] WASHER (33X56X6-MM THK)  
17. 177-9754 M [11] BOLT (M30X3.5X130-MM)  
18. 214-1639 [1] MAGNET  
19. 243-3177 [1] RETAINER  
20. 300-8784 [1] SENSOR GP-POSITION (BUCKET CYLINDER)  
21. 102-2244 [1] GROMMET  
22. 212-0907 [1] PLATE-CONNECTOR  
23. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
25. 217-8763 [1] COVER-PROTECTION  
26. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
27. 147-5771 J [1] RING-BACKUP  
28. 215-1942 [1] RING-BACKUP  
29. 101-7401 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
30. 188-2199 [1] SEAL-O-RING  
31. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
32. 8T-6757 [1] PLUG-PIPE  
33. 8T-8737 [1] PLUG-SEAL  
34. 367-3928 J [1] SEAL-BUFFER  
35. 9X-1386 E SLEEVE (10-CM EACH)  
   
    AVAILABLE REPAIR KIT(S):
  370-1940 J [1] KIT-SEAL (BUCKET CYLINDER)  
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP74400542
 

570-1989: CYLINDER GP-BUCKET

570-1989 CYLINDER GP-BUCKET
S/N HSM1-UP
220-MM (8.7-IN) BORE X 1586-MM (62.4-IN) STROKE
PART OF 362-6002 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i07635867 SEBP7440
5701989 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-6442 J [1] RING-BACKUP  
2. 8C-9182 J [1] SEAL AS  
3. 9X-8399 [12] WASHER (33X56X6-MM THK)  
4. 103-8364 [1] RING-RETAINING  
5. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
6. 128-9262 [1] BUSHING  
7. 155-9157 J [2] RING  
8. 173-3414 J [1] RING  
9. 362-4564 [1] CYLINDER AS-HYDRAULIC  
10. 367-3934 J [1] SEAL-BUFFER  
11. 367-3961 J [1] SEAL-U-CUP  
12. 421-1899 [1] HEAD  
13. 433-5664 [1] PISTON  
14. 514-6718 J [1] SEAL-LIP TYPE  
15. 514-6719 J [1] RING-BACKUP  
16. 095-1733 J [1] SEAL-O-RING  
17. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
18. 570-1990 [1] ROD AS  
18A. 308-8824 [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  519-1485 J [1] KIT-SEAL (BUCKET CYLINDER)  
    (ALSO INCLUDES BACK-UP RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP74400543
 

155-9196: CYLINDER GP-COUNTERWEIGHT

155-9196 CYLINDER GP-COUNTERWEIGHT
S/N HSM1-UP
PART OF 431-4002 COUNTERWEIGHT AR
AN ATTACHMENT
i01701089 SEBP7440
1559196 CYLINDER GP-COUNTERWEIGHT Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9197 Y [1] CYLINDER GP-COUNTERWEIGHT  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 7X-4803 [2] SEAL-LIP TYPE  
4. 096-0854 [2] SEAL-LIP TYPE  
5. 3B-8485 [1] ELBOW  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74400544
 

155-9197: CYLINDER GP-COUNTERWEIGHT

155-9197 CYLINDER GP-COUNTERWEIGHT
S/N HSM1-UP
150-MM (5.9-IN) BORE X 940-MM (37-IN) STROKE
PART OF 155-9196 CYLINDER GP-COUNTERWEIGHT
AN ATTACHMENT
i01701091 SEBP7440
1559197 CYLINDER GP-COUNTERWEIGHT Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-4224 [1] CYLINDER AS  
1A. 7Y-4666 [1] BUSHING  
2. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
3. 188-4217 J [2] RING  
4. 9X-3601 J [1] SEAL AS  
5. 188-4218 J [1] RING  
6. 188-4216 [1] PISTON  
7. 095-1633 J [1] SEAL-O-RING  
8. 7Y-4673 J [1] RING-BACKUP  
9. 358-8524 [1] HEAD  
10. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
11. 173-3363 [1] ROD AS  
11A. 7Y-5102 [1] BUSHING  
12. 7Y-4672 [1] RING-RETAINING  
13. 114-0760 [1] BUSHING  
14. 128-9265 J [1] SEAL-BUFFER  
15. 170-9864 J [1] SEAL-U-CUP  
16. 7Y-4669 J [1] RING-BACKUP  
17. 165-9290 J [1] SEAL-LIP TYPE  
   
    AVAILABLE REPAIR KIT(S):
  191-5619 J [1] KIT-SEAL (COUNTERWEIGHT CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP74400545
 

169-0776: CYLINDER GP-COUPLER

169-0776 CYLINDER GP-COUPLER
S/N HSM1-UP
90-MM (3.5-IN) BORE X 200-MM (7.9-IN) STROKE
PART OF 169-0762 LOCK GP-QUICK COUPLER
AN ATTACHMENT
i03828631 SEBP7440
1690776 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-3923 [1] KIT-VALVE (QUICK COUPLER)  
   
    AVAILABLE REPAIR KIT(S):
  219-1323 [1] KIT-SEAL (COUPLER CYLINDER)  
 

#SEBP74400546
 

570-1981: CYLINDER GP-STICK

570-1981 CYLINDER GP-STICK
S/N HSM1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
PART OF 362-6005 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i07776832 SEBP7440
5701981 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
2. 8C-4893 J [1] SEAL-HEAD (211.58-MM ID)  
3. 8C-9182 J [1] SEAL AS  
4. 9X-8399 [12] WASHER (33X56X6-MM THK)  
5. 103-8364 [1] RING-RETAINING  
6. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
7. 116-3519 J [1] RING-SEAL  
8. 155-9157 J [2] RING  
9. 173-3414 J [1] RING  
10. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
11. 191-5704 [1] STOP  
12. 317-8435 [1] ROD AS  
12A. 172-2848 [1] BUSHING  
13. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
14. 353-9626 [1] CYLINDER AS  
14A. 172-2848 [1] BUSHING  
15. 365-9196 J [1] SEAL-O-RING  
16. 365-9197 J [2] RING-BACKUP  
17. 367-3934 J [1] SEAL-BUFFER  
18. 367-3961 J [1] SEAL-U-CUP  
19. 383-8638 [1] STOP  
20. 433-5664 [1] PISTON  
21. 436-8027 [1] NUT  
22. 514-6718 J [1] SEAL-LIP TYPE  
23. 514-6719 J [1] RING-BACKUP  
24. 570-1982 [1] HEAD  
25. 570-1983 [1] BEARING-SLEEVE  
26. 570-1984 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  570-1985 JY [1] KIT-HYDRAULIC CYLINDER  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74400547
 

378-9545: DRIVE & MTG GP-SWING

378-9545 DRIVE & MTG GP-SWING
S/N HSM1-UP
PART OF 424-9512 POWER TRAIN AR
i05748703 SEBP7440
3789545 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [4] CORK  
2. 114-1374 [1] SUPPORT  
3. 353-0518 [46] SPACER (24.5X44X14-MM THK)  
4. 367-8322 [1] SUPPORT  
5. 378-9550 [1] SUPPORT  
6. 173-9779 M [46] BOLT (M24X3X80-MM)  
7. 451-2796 Y [1] DRIVE GP-SWING (WITH MOTOR, FRONT)  
8. 451-2798 Y [1] DRIVE GP-SWING (WITH MOTOR, REAR)  
9. 096-4755 [2] PIN  
10. 096-4883 M [4] LOCKNUT (M10X1.5-THD)  
11. 5D-1026 [2] CLAMP-BAND  
12. 7Y-5262 [2] U-BOLT  
13. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
15. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
16. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 9V-5382 [1] GROMMET  
18. 5P-0767 E HOSE (70-CM)  
18A. 5P-0767 E HOSE (140-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74400548
 

6I-3638: DRIVE GP-PUMP

6I-3638 DRIVE GP-PUMP
S/N TXW1-UP
PART OF 364-5412, 415-1858, 467-2588, 484-3457 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01504030 SEBP7440
6I3638 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1590 [3] BOLT (3/8-16X2-IN)  
2. 8T-9527 [1] SEAL-O-RING  
3. 133-9907 YC [1] ADAPTER GP-PUMP DRIVE  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74400549
 

378-9557: DRIVE GP-SWING

378-9557 DRIVE GP-SWING -WITHOUT MOTOR
S/N HSM1-UP
PART OF 451-2798 DRIVE GP-SWING
i05748713 SEBP7440
3789557 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7238 [1] VALVE-SHUTOFF  
2. 7I-7611 [1] CAGE  
3. 094-1528 [6] WASHER (53X84X1-MM THK)  
4. 110-7149 [1] RING-RETAINING  
5. 114-1322 [1] RING-RETAINING  
6. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
7. 199-4496 [1] SHAFT-PINION  
8. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
9. 367-8326 [1] TUBE AS  
10. 367-8328 [1] MARKER-TERMINAL  
11. 378-9523 [1] CARRIER-PLANETARY  
12. 378-9524 [4] SHAFT  
13. 378-9525 [8] WASHER (62.3X104X1-MM THK)  
14. 378-9526 [1] GEAR-RING (67-TEETH)  
15. 378-9527 [4] GEAR-PLANETARY (24-TEETH)  
16. 378-9528 [3] GEAR-PLANETARY (24-TEETH)  
17. 378-9529 [1] GEAR-SUN (13-TEETH)  
18. 378-9530 [1] GEAR-SUN (17-TEETH)  
19. 378-9531 [1] CARRIER AS  
20. 378-9534 [1] COVER-HOUSING  
21. 378-9535 [1] HOUSING  
22. 451-2175 [24] WASHER-HARD (17.5X30X3.5-MM THK)  
23. 451-2182 [22] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 453-3447 M [22] BOLT (M12X1.75X40-MM)  
25. 093-1730 [1] RING-RETAINING  
26. 095-0927 [3] RING-RETAINING  
27. 096-1441 [1] RING-RETAINING  
28. 099-5194 [4] PIN-SPRING  
29. 128-9170 [2] SEAL-LIP TYPE  
30. 153-6247 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  8C-6875 [1] CONNECTOR  
31. 296-6269 [3] BEARING-ROLLER  
32. 378-9593 [8] BEARING AS  
33. 3K-0360 [1] SEAL-O-RING  
34. 5M-4454 [1] SEAL-O-RING  
35. 7I-7619 [1] BEARING-ROLLER  
36. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
37. 8T-0348 M [24] BOLT-SOCKET HEAD (M16X2X50-MM)  
38. 9U-8693 [1] BEARING-ROLLER  
   
  1U-8846 BF [6] SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ON CERTAIN 390F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Bucket Cylinder Rods are Breaking on Certain 390D, 390L, and 390F Excavators {5457}
Bucket Cylinder Rods are Breaking on Certain 390D, 390L, and 390F Excavators {5457}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Specifications
Boom Cylinder
390F Excavator Machine System
Cylinder Guard
390F Excavator Machine System
Bucket Cylinder
390F Excavator Machine System
Bucket Cylinder
390F Excavator Machine System
Bucket Cylinder
390F Excavator Machine System
Stick Cylinder
390F Excavator Machine System
Boom Lines
390F Excavator Machine System
Boom Lines
390F Excavator Machine System
Boom Lines
390F Excavator Machine System
Boom Lines
390F Excavator Machine System
Boom Cylinder Lines
390F Excavator Machine System
Boom Cylinder Lines
390F Excavator Machine System
Counterweight Cylinder
390F Excavator Machine System
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ON CERTAIN 390F EXCAVATORS
Service Letter-Asia
Systems Operation
Boom Cylinder
390F Excavator Machine Systems
Stick Cylinder
390F Excavator Machine Systems
Bucket Cylinder
390F Excavator Machine Systems
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ON CERTAIN 390F EXCAVATORS
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
390F Excavator Machine System
Cylinder Drift - Check - Loaded Bucket
390F Excavator Machine System
Cylinder Speed - Check
390F Excavator Machine System
Relief Valve (Counterweight Cylinder) - Test and Adjust
390F Excavator Machine System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove and Install
390F Excavator Machine Systems
Bucket Cylinder - Remove and Install
390F Excavator Machine Systems
Boom Cylinder - Remove and Install
390F Excavator Machine Systems
Counterweight Cylinder - Remove and Install
390F Excavator Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}
A More Reliable Stick Cylinder Group Is Now Used on Certain 390F Excavators {5458}
A More Reliable Stick Cylinder Group Is Now Used on Certain 390F Excavators {5458}
A New Bucket Cylinder Group is Now Used on Certain 374F and 390F Excavators {5457}
A New Bucket Cylinder Group is Now Used on Certain 374F and 390F Excavators {5457}

Caterpillar Parts SIS Catalog 390F L :

CYLINDER GP-BUCKET
362-4589 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
470-7141 CYLINDER GP-BOOM
CYLINDER GP-BOOM
362-9780 CYLINDER GP-BOOM
475-1373 CYLINDER AR-BOOM
384-1135 CYLINDER AR-BOOM
384-1134 CYLINDER AR-BOOM
CYLINDER & SEAL GP-STICK
362-6005 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-BUCKET
364-9310 CYLINDER & SEAL GP-BUCKET
CYLINDER GP-BUCKET
363-9317 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
570-1989 CYLINDER GP-BUCKET
CYLINDER GP-COUNTERWEIGHT
155-9196 CYLINDER GP-COUNTERWEIGHT
CYLINDER GP-COUNTERWEIGHT
155-9197 CYLINDER GP-COUNTERWEIGHT
CYLINDER GP-COUPLER
169-0776 CYLINDER GP-COUPLER
CYLINDER GP-STICK
570-1981 CYLINDER GP-STICK
DRIVE & MTG GP-SWING
378-9545 DRIVE & MTG GP-SWING
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.