AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

395-0113 WIRING GP-ENGINE S/N BD41-UP PART OF 452-0960, 542-4983 ENGINE AR-PRIMARY ALSO AN ATTACHMENT 329D2


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 329D2 EXCAVATOR SHJ
 329D2 & 329D2 L Excavators SHJ00001-UP (MACHINE) POWERED BY C7.1 Engine SEBP7448 329D2 SHJ   (2014)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
WIRING GP-PLATFORM
398-7004 WIRING GP-PLATFORM
 

#SEBP74480240
 

395-0113: WIRING GP-ENGINE

395-0113 WIRING GP-ENGINE
S/N BD41-UP
PART OF 452-0960, 542-4983 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i06932303 SEBP7448
3950113 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6034 C [3] SEAL-O-RING  
2. 277-5065 C [3] CLIP  
3. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
4. 217-9039 [1] STRAP-CABLE  
5. 348-4637 [1] BOLT  
6. 375-8407 CY [3] HARNESS AS-WIRING (INJECTOR)  
7. 377-1293 [1] BRACKET  
8. 385-5997 Y [1] HARNESS AS-ENGINE  
9. 389-3863 [1] BRACKET  
10. 392-2780 [1] BRACKET  
11. 132-5789 [1] CLIP (LADDER)  
12. 232-1693 M [1] BOLT-FLANGE HEAD (M6X1X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74480241
 

395-0113: WIRING GP-ENGINE

395-0113 WIRING GP-ENGINE
S/N BD41-UP
PART OF 452-0960 ENGINE AR-PRIMARY
Type 2
ALSO AN ATTACHMENT
i05954940 SEBP7448
3950113 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 323-7347 C [3] SEAL-O-RING  
2. 254-3633 CM [3] BOLT-FLANGE HEAD (M6X1X16-MM, SELF LOCKING)  
3. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
4. 217-9039 [1] STRAP-CABLE  
5. 348-4637 [1] BOLT  
6. 458-3745 C [3] HARNESS AS-PLATFORM  
    (EACH INCLUDES)
  332-7865 [1] TIE-CABLE  
7. 377-1293 [1] BRACKET  
8. 385-5997 Y [1] HARNESS AS-ENGINE  
9. 389-3863 [1] BRACKET  
10. 392-2780 [1] BRACKET  
11. 132-5789 [1] CLIP (LADDER)  
12. 232-1693 M [1] BOLT-FLANGE HEAD (M6X1X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74480242
 

259-4965: WIRING GP-FINE SWING

259-4965 WIRING GP-FINE SWING
S/N SHJ1-UP; THW1-UP
PART OF 445-6273, 445-6274 CHASSIS AR
ALSO AN ATTACHMENT
i02534126 SEBP7448
2594965 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8109 [1] BRACKET AS  
2. 111-4836 [6] CLIP  
3. 111-4837 [2] CLIP  
4. 291-7551 [1] HARNESS AS-MOTOR  
5. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
7. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP74480243
 

398-7004: WIRING GP-PLATFORM

398-7004 WIRING GP-PLATFORM
S/N SHJ1-UP; THW1-UP
PART OF 422-0645 OPERATOR AR
Type 1
ALSO AN ATTACHMENT
i05444432 SEBP7448
3987004 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [6] STRAP-CABLE  
3. 7G-1060 [1] STRAP AS-GROUND  
4. 7K-1181 [15] STRAP-CABLE  
5. 111-4836 [4] CLIP  
6. 111-4838 [2] CLIP  
7. 111-4839 [2] STRAP  
8. 116-0118 [11] CLIP  
9. 234-1122 [1] COVER  
10. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
11. 441-7659 Y [1] HARNESS AS-PLATFORM  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
14. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
15. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74480244
 

398-7004: WIRING GP-PLATFORM

398-7004 WIRING GP-PLATFORM
S/N SHJ1-UP; THW1-UP
PART OF 422-0645 OPERATOR AR
Type 2
ALSO AN ATTACHMENT
i06269799 SEBP7448
3987004 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [6] STRAP-CABLE  
3. 7G-1060 [1] STRAP AS-GROUND  
4. 7K-1181 [15] STRAP-CABLE  
5. 111-4836 [4] CLIP  
6. 111-4838 [2] CLIP  
7. 111-4839 [2] STRAP  
8. 116-0118 [11] CLIP  
9. 234-1122 [1] COVER  
10. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
11. 465-8799 C [1] HARNESS AS-PLATFORM  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [22] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [21] STRAP-CABLE  
  8T-8737 [31] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [17] TERMINAL (FEMALE)  
  9W-0852 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [33] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [35] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)  
  9X-3402 [57] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [57] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8050 [2] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [2] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  2L-8052 [2] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [2] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [15] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [15] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-5010 [2] PLUG AS-CONNECTOR (6-PIN)  
    (EACH INCLUDES)
  264-7032 [1] SEAL-CONNECTOR  
  238-2363 [13] TERMINAL (FEMALE)  
  238-2366 [6] TERMINAL (MALE)  
  239-7352 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [2] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  342-2972 [1] CAP-CONNECTOR (2-PIN)  
  342-2974 [2] CAP-CONNECTOR (6-PIN)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
14. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
15. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP74480245
 

433-0718: WIRING GP-RADIO

433-0718 WIRING GP-RADIO -12-VOLT
S/N SHJ1-UP; THW1-UP
AN ATTACHMENT
i05785613 SEBP7448
4330718 WIRING GP-RADIO Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [11] STRAP-CABLE  
2. 4I-7889 [1] SPACER (11X25X45-MM THK)  
3. 7K-1181 [10] STRAP-CABLE  
4. 116-0118 [1] CLIP  
5. 149-5050 [4] RELAY (24-VOLT)(SPEAKERS)  
6. 170-2512 Y [1] SWITCH GP-TOGGLE (SPEAKER)  
7. 267-7676 [1] BRACKET AS  
8. 433-2644 [1] BRACKET AS  
9. 283-2914 [1] HARNESS AS-RADIO  
  8T-8737 [9] PLUG-SEAL  
  8T-8730 [21] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [6] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  149-5069 [8] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [12] TERMINAL-BLADE (16-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [25] STRAP-CABLE  
  149-5051 [4] CONNECTOR-RECEPTACLE  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  455-0707 [1] SEAL-CONNECTOR  
  231-2295 [2] PLUG AS-CONNECTOR (8-PIN)  
    (EACH INCLUDES)
  455-0708 [1] SEAL-CONNECTOR  
  243-4509 [2] RECEPTACLE AS-CONNECTOR (8-PIN)  
10. 283-2984 [1] COVER  
11. 475-2681 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
12. 8T-4138 M [2] BOLT (M6X1X20-MM)  
13. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
14. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
15. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74480246
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N SHJ1-UP; THW1-UP
PART OF 419-7338, 419-8979 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
i03161283 SEBP7448
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74480247
 

353-0492: DRIVE GP-FINAL

353-0492 DRIVE GP-FINAL
S/N SHJ1-UP; THW1-UP
PART OF 171-9410 POWER TRAIN AR
ALSO AN ATTACHMENT
i05238592 SEBP7448
3530492 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-2994 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 378-9568 CY [1] DRIVE GP-FINAL (WITH MOTOR)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74480248
 

378-9567: DRIVE GP-FINAL

378-9567 DRIVE GP-FINAL -WITHOUT MOTOR
S/N SHJ1-UP; THW1-UP
PART OF 378-9568 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@515-0070@@@@@, @@@@@515-0073@@@@@
ALSO AN ATTACHMENT
i05239035 SEBP7448
3789567 DRIVE GP-FINAL Parts scheme 3789567 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0752 B [1] SHIM (0.8-MM THK)  
  7Y-0753 B [1] SHIM (1-MM THK)  
  7Y-0754 B [1] SHIM (1.6-MM THK)  
4. 094-0578 [1] PLATE (8-MM THK)  
5. 094-0579 [1] PLATE (9-MM THK)  
6. 094-0580 [1] PLATE (10-MM THK)  
7. 094-1528 [12] WASHER (53X84X1-MM THK)  
8. 114-1540 [4] PIN-DOWEL  
9. 169-5589 [1] GEAR-SUN (24-TEETH)  
10. 169-5590 [1] GEAR-SUN (24-TEETH)  
11. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
12. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
13. 169-5601 [3] SHAFT-PLANETARY  
14. 169-5602 [3] SHAFT-PLANETARY  
15. 171-9387 [1] GEAR-RING (64-TEETH)  
16. 191-2571 [1] CARRIER-PLANETARY  
17. 191-2676 [1] GEAR-RING (72-TEETH)  
18. 191-2683 [1] GEAR-SUN (20-TEETH)  
19. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
20. 191-2686 [1] CARRIER AS  
  191-2687 [3] RACE-BEARING  
21. 191-2689 [3] WASHER (34X70X1-MM THK)  
22. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
23. 199-4503 [1] COVER  
24. 207-1571 [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
25. 267-6798 [1] HOUSING  
26. 267-6799 [1] CARRIER-PLANETARY  
27. 267-6800 [1] GEAR-COUPLING  
28. 267-6863 B [1] SHIM (0.75-MM THK)  
  267-6864 B [1] SHIM (0.85-MM THK)  
  267-6865 B [1] SHIM (0.9-MM THK)  
  267-6866 B [1] SHIM (0.95-MM THK)  
  267-6867 B [1] SHIM (1.2-MM THK)  
  267-6868 B [1] SHIM (1.4-MM THK)  
  267-6869 B [1] SHIM (1.8-MM THK)  
  267-6870 B [1] SHIM (2-MM THK)  
  267-6871 B [1] SHIM (2.3-MM THK)  
37. 296-6248 [3] BEARING AS-ROLLER  
38. 333-2914 [2] BALL BEARING  
39. 333-2916 [3] BEARING AS  
40. 333-2917 [6] BEARING AS  
41. 367-8276 [1] HOUSING-MOTOR  
42. 093-1731 [2] RING-RETAINING  
43. 095-0891 [6] PIN-SPRING  
44. 096-0433 [3] RING-RETAINING  
45. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
46. 171-9298 [1] SEAL-O-RING  
47. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
48. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
49. 7M-8485 [2] SEAL-O-RING  
50. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
51. 7Y-5217 M [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
52. 8T-3282 [16] WASHER-HARD (22X35X3.5-MM THK)  
53. 451-2176 [16] WASHER-HARD (22X35X3.5-MM THK)  
54. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP74480249
 

378-9568: DRIVE GP-FINAL

378-9568 DRIVE GP-FINAL -WITH MOTOR
S/N SHJ1-UP; THW1-UP
PART OF 353-0492 DRIVE GP-FINAL
ALSO AN ATTACHMENT
i05238702 SEBP7448
3789568 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 329D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 378-9567 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
2. 334-9988 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Caterpillar Parts SIS Catalog 329D2 :

WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-CONSOLE
398-7006 WIRING GP-CONSOLE
398-7005 WIRING GP-CONSOLE
WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
418-1081 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
399-1110 WIRING GP-COMMUNICATION
WIRING GP-CHASSIS
467-4923 WIRING GP-CHASSIS
WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
WIRING GP-PLATFORM
398-7004 WIRING GP-PLATFORM
WIRING GP-PLATFORM
398-7004 WIRING GP-PLATFORM
WIRING GP-RADIO
433-0718 WIRING GP-RADIO
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
353-0492 DRIVE GP-FINAL
DRIVE GP-FINAL
378-9567 DRIVE GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.