369-0809 STARTING MOTOR GP-ELECTRIC S/N TXF5182-UP 24-VOLT, 50-MT PART OF 424-8405, 424-8407 ENGINE AR-COMPLETE FOR USE WITH LEFT HAND STARTER APPLICATIONS ALSO AN ATTACHMENT 349D2



ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
SWITCH GP

EXCAVATOR 349D2 EXCAVATOR PFD
 349D2, 349D2 L & 349D2 L-VG Excavators PFD00001-UP (MACHINE) POWERED BY C13 Engine SEBP7451 349D2 PFD   (2014)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
STARTING MOTOR GP-ELECTRIC
348-7651 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
369-0809 STARTING MOTOR GP-ELECTRIC
 

#SEBP74510340
 

369-0809: STARTING MOTOR GP-ELECTRIC

369-0809 STARTING MOTOR GP-ELECTRIC
S/N TXF5182-UP
24-VOLT, 50-MT
PART OF 424-8405, 424-8407 ENGINE AR-COMPLETE
FOR USE WITH LEFT HAND STARTER APPLICATIONS
ALSO AN ATTACHMENT
i05434752 SEBP7451
3690809 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 8Y-9603 [1] CABLE AS-STARTING MOTOR  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(28-CM)  
2. 9Y-6089 [1] GASKET  
3. 348-7651 Y [1] STARTING MOTOR GP-ELECTRIC  
4. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74510341
 

7N-0719: SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N PFD1-UP; SDM1-UP
PART OF 299-2966 PANEL GP-CIRCUIT BREAKER
ALSO AN ATTACHMENT
i01102384 SEBP7451
7N0719 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 2H-3922 [1] LOCKWASHER  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 9F-5644 [2] LOCKWASHER  
4. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
5. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
 

#SEBP74510342
 

125-1302: SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC
S/N PFD1-UP; SDM1-UP
24-VOLT
PART OF 299-2966 PANEL GP-CIRCUIT BREAKER
ALSO AN ATTACHMENT
i01861001 SEBP7451
1251302 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER  
4. 3B-4504 [2] LOCKWASHER  
5. 5C-2890 M [2] NUT (M6X1-THD)  
6. 9X-1813 E SLEEVE (16-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP74510343
 

275-1253: SWITCH GP-PRESSURE

275-1253 SWITCH GP-PRESSURE
S/N PFD1-UP; SDM1-UP
PART OF 380-3958 LINES GP-FUEL
ALSO AN ATTACHMENT
i02634114 SEBP7451
2751253 SWITCH GP-PRESSURE Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
2. 9X-1813 E SLEEVE (14-CM)  
3. 6V-4589 [1] SEAL-O-RING  
4. 9X-7737 [1] SEAL-O-RING  
5. 9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  E   ORDER BY THE CENTIMETER
 

#SEBP74510344
 

238-1594: SWITCH GP-PUSH BUTTON

238-1594 SWITCH GP-PUSH BUTTON -REFUELING PUMP, START
S/N PFD1-UP; SDM1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP
AN ATTACHMENT
i03156060 SEBP7451
2381594 SWITCH GP-PUSH BUTTON Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 6T-9442 [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
  1S-0812 [2] SCREW-TAPPING  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (REFUELING PUMP, START)  
2. 238-1595 [1] HARNESS AS-SWITCH  
3. 125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(6-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP74510345
 

238-1596: SWITCH GP-PUSH BUTTON

238-1596 SWITCH GP-PUSH BUTTON -REFUELING PUMP, STOP
S/N PFD1-UP; SDM1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP
AN ATTACHMENT
i03156100 SEBP7451
2381596 SWITCH GP-PUSH BUTTON Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 9X-4184 [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
  1S-0812 [2] SCREW-TAPPING  
  3E-7389 [1] SWITCH-PUSH BUTTON (REFUELING PUMP, STOP)  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
2. 238-1597 [1] HARNESS AS-SWITCH  
3. 125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(6-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP74510346
 

319-4420: SWITCH GP-ROTARY

319-4420 SWITCH GP-ROTARY -THROTTLE POSITION
S/N PFD1-UP; SDM1-UP
PART OF 251-0542, 251-0544, 393-1986 PANEL GP-SWITCH
AN ATTACHMENT
i03105700 SEBP7451
3194420 SWITCH GP-ROTARY Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
2. 9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
3. 8T-8737 [1] PLUG-SEAL  
4. 7Y-5458 M [1] NUT (M12X1-THD)  
5. 7Y-5464 [1] WASHER (12.2X15.4X0.5-MM THK)  
6. 106-0210 [1] SEAL  
  M   METRIC PART
 

#SEBP74510347
 

255-2751: SWITCH GP-START

255-2751 SWITCH GP-START -ENGINE, KEY
S/N PFD1-UP; SDM1-UP
PART OF 251-0542, 251-0544, 393-1986 PANEL GP-SWITCH
AN ATTACHMENT
i04407211 SEBP7451
2552751 SWITCH GP-START Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 6V-8362 [4] SCREW-MACHINE (8-32X0.31-IN)  
2. 9B-7233 [4] LOCKWASHER  
3. 7T-6799 [1] NUT-MOUNTING (1-32-THD)  
   
  5P-8500 AF [1] KEY  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
 

#SEBP74510348
 

165-5970: SWITCH GP-TOGGLE

165-5970 SWITCH GP-TOGGLE
S/N PFD1-UP; SDM1-UP
PART OF 291-7766 BATTERY & WIRING GP
ALSO AN ATTACHMENT
i02408655 SEBP7451
1655970 SWITCH GP-TOGGLE Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
2. 6T-3632 [1] LOCKWASHER  
3. 6T-3633 [1] RING-LOCKING  
4. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 112-4550 E SLEEVE (15-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP74510349
 

238-2478: SWITCH GP-TOGGLE

238-2478 SWITCH GP-TOGGLE
S/N PFD1-UP; SDM1-UP
PART OF 238-2485 SWITCH GP-TOGGLE
AN ATTACHMENT
i02216251 SEBP7451
2382478 SWITCH GP-TOGGLE Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7N-2353 [1] SWITCH AS-TOGGLE (QUICK COUPLER LOCK)  
2. 238-2479 [1] HARNESS AS-WIRING (QUICK COUPLER SWITCH)  
  7Y-3950 [2] TERMINAL-BLADE (14-GA TO 20-GA)  
  7Y-3953 [1] CONNECTOR-RECEPTACLE  
  3S-2093 [1] STRAP-CABLE  
 

Information:

Special Instruction
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Electric Starting Motor
C11 and C13 Engines
Testing and Adjusting
Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines
Pinion Clearance - Adjust
C11 and C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 349D2 :

STARTING MOTOR GP-ELECTRIC
348-7651 STARTING MOTOR GP-ELECTRIC
STARTING AID GP-ETHER
222-8365 STARTING AID GP-ETHER
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
4P-5820 SENSOR GP-SPEED
SENSOR GP-SPEED
384-1836 SENSOR GP-SPEED
SENSOR GP-SPEED
300-9806 SENSOR GP-SPEED
SENSOR GP-SPEED
300-9805 SENSOR GP-SPEED
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-PRESSURE
275-1253 SWITCH GP-PRESSURE
SWITCH GP-PUSH BUTTON
238-1594 SWITCH GP-PUSH BUTTON
SWITCH GP-PUSH BUTTON
238-1596 SWITCH GP-PUSH BUTTON
SWITCH GP-ROTARY
319-4420 SWITCH GP-ROTARY
SWITCH GP-START
255-2751 SWITCH GP-START
SWITCH GP-TOGGLE
165-5970 SWITCH GP-TOGGLE